Related
I'm on the verge of buying an archos 70 8GB IT, but I need a critical question answered first.
I'm planning on using this on my car, and would need to grab internet from my phone. I have an ATT captivate running a custom froyo rom. Now, there is an function on my phone to start a mobile AP through wifi (I believe it is the standard froyo feature and not some third party add-on).
Does this wifi hotspot not work with the archos? This would be a major dealbreaker as bluetooth is out of the question due to having to use a GPS to bluetooth adapter.
I've read a couple of forums up and down and no one seems to have answered this question completely. It seems that everyone has come to the conclusion that android does not have support for ad-hoc networks. I guess my questions lies more along the lines of whether the froyo mobile ap is an adhoc network.
Thanks.
You may remove your connection.
Re-connect it with power save disabled
it may OK
I am using a ZTE Blade/San Francisco with a custom Froyo rom and I can wireless tether my Archos 70IT to my wireless hotspot.
I have a rooted HTC Incredible with stock froyo, and tether my A70 using Wireless Tether from the market. Works great. So does my bluetooth gps, by the way.
Not that this should change your plans, but the fact that you need Bluetooth for GPS doesn't necessarily eliminate using Bluetooth for tethering simultaneously.
I've done exactly that with a Blackberry Tour (for tethering) and a cheap-when-I-bought-it TomTom Bluetooth external GPS unit. I used this configuration to get Google Navigation working. FWIW, doing this actually drove me to get CoPilot, as I didn't want to be tethered all the time to do GPS navigation.
rglick64 said:
Not that this should change your plans, but the fact that you need Bluetooth for GPS doesn't necessarily eliminate using Bluetooth for tethering simultaneously.
I've done exactly that with a Blackberry Tour (for tethering) and a cheap-when-I-bought-it TomTom Bluetooth external GPS unit. I used this configuration to get Google Navigation working. FWIW, doing this actually drove me to get CoPilot, as I didn't want to be tethered all the time to do GPS navigation.
Click to expand...
Click to collapse
That's interesting, I was under the impression that you could only have one device paired at one time. This is good news as I was hoping to perhaps write a program that would allow me to use the archos as a bluetooth headset (to receive calls while in the car), but since I would already have been using it for GPS, I didn't think I could do that.
Regarding my original question, it appears the the froyo mobile AP feature does work in infrastructure mode, I made a hotspot and my friend's nexus one connected to it fine.
Thanks.
I tried to tether to my HTC HD2 with WM 6.5.3, but no success. WiFi hotspot is ad-hoc, Bluetooth and USB tethering simply doesn't work. I'm at a deadlock... Any ideas?
Doesn't the HD2 run android as well? You could switch to that.
KOCTA said:
I tried to tether to my HTC HD2 with WM 6.5.3, but no success. WiFi hotspot is ad-hoc, Bluetooth and USB tethering simply doesn't work. I'm at a deadlock... Any ideas?
Click to expand...
Click to collapse
Hi,
I´m also in trouble with mobile 6.5 on Omnia i8000 and archos 101. No tethering via BT or USB. Seems to be a mobile 6.5 problem.
I tethered my archos via BT to an SE t630 without any problem.
But I need it for my maindevice Omnia ...
ske714 said:
I have a rooted HTC Incredible with stock froyo, and tether my A70 using Wireless Tether from the market. Works great. So does my bluetooth gps, by the way.
Click to expand...
Click to collapse
Could you link to an .APK file for download? On my rooted myTouch Slide with CM6, it just doesn't show up in the market.
I just got my A70 IT 250 gb, I am not able to use Wifi Tether from my Epic 4G. Rooted with Froyo.
any help will be greatly appreciated..
Using the Mobile AP option is the settings menu? Or using some custom Sprint functionality. The Mobile AP one should work.
By the way, where did you buy your A70, I've been trying to buy one but its sold out everywhere.
RollerCoasting said:
Could you link to an .APK file for download? On my rooted myTouch Slide with CM6, it just doesn't show up in the market.
Click to expand...
Click to collapse
Choose your flavor...
code.google.com/p/android-wifi-tether/]
thenameisgabe said:
Using the Mobile AP option is the settings menu? Or using some custom Sprint functionality. The Mobile AP one should work.
By the way, where did you buy your A70, I've been trying to buy one but its sold out everywhere.
Click to expand...
Click to collapse
Did you try CDW? I got one there about a week ago. I called and they sold one to me for $275.
confirmed Wireless Tehthered doesn't work....it doesn't connect to adhoc Wifi hotspot such as my Iphone 4 on Mywi.
I'm using Arcgos 70IT 250GB rooted
ske714 said:
I have a rooted HTC Incredible with stock froyo, and tether my A70 using Wireless Tether from the market. Works great. So does my bluetooth gps, by the way.
Click to expand...
Click to collapse
ske714 said:
I have a rooted HTC Incredible with stock froyo, and tether my A70 using Wireless Tether from the market. Works great. So does my bluetooth gps, by the way.
Click to expand...
Click to collapse
Do you have the link or How-to, to get your A70 work on Wifi?
A70 root
carlochiefsg said:
confirmed Wireless Tehthered doesn't work....it doesn't connect to adhoc Wifi hotspot such as my Iphone 4 on Mywi.
I'm using Arcgos 70IT 250GB rooted
Click to expand...
Click to collapse
Just wondering how did you root your A70? was it easy? I saw a post on XDA on how to root Archos Gen8, using SDE. I read thru it and got chicken out.
carlochiefsg said:
confirmed Wireless Tehthered doesn't work....it doesn't connect to adhoc Wifi hotspot such as my Iphone 4 on Mywi.
I'm using Arcgos 70IT 250GB rooted
Click to expand...
Click to collapse
Wireless Tether is an app you run on your rooted android phone. It shares the phone's 3G/4G connection, which will show up as an available connection in your A70's wireless settings and allow you to access the internet with your tablet.
An adhoc network is used to allow the devices to communicate and share files with each other. I don't believe the A70 will connect using adhoc wifi.
mtang65 said:
Do you have the link or How-to, to get your A70 work on Wifi?
Click to expand...
Click to collapse
Once you have Wireless Tether installed and opened on your rooted android phone, open up the settings. Change the SSID to something you will recognize. I would leave the encryption and access control off until you have it working. Then go back to the main screen and press to start tethering. Once it starts, open the wifi settings on your A70 and scan for devices. You should see your phone and be able to connect to it.
Once working, I recommend going back and setting the access control and encryption. You will have to set a passphrase in the phone for the encryption, then edit the connection on you tablet (long press) and add it to the settings. With access control enabled, you have to accept the connection on you phone the first time. Once you start tethering and your tablet tries to connect, hit menu->access control on the phone and accept the connection.
I've red that Android devices could connect to ad-hoc networks if you are able to make changes in config files via adb. Alas I can't do this on my 101
Will TetherGPS (Lite or Full) work with any ROMs on the GTab. Would love to have a 10inch GPS.
morseja said:
Will TetherGPS (Lite or Full) work with any ROMs on the GTab. Would love to have a 10inch GPS.
Click to expand...
Click to collapse
Dont see why not, but the only reason that came out was because the nook color had no bluetooth (at the time), which the gtab has.
acomiskey said:
Dont see why not, but the only reason that came out was because the nook color had no bluetooth (at the time), which the gtab has.
Click to expand...
Click to collapse
how does bluetooth help with GPS? I guess im missing something
DroidHam said:
how does bluetooth help with GPS? I guess im missing something
Click to expand...
Click to collapse
Bluetooth tether to get gps from your phone or from bluetooth gps receiver.
Tethergps is a client/server app which sends gps data over 2 wifi tethered android devices. For example, I wifi tether my droid x to my nook color, and send gps info from droid x to nook color.
TetherGPS does not wok on VEGAn 5.1.1 on the Gtablet. If I remember correctly, someone tried it on one of the TnT-lite variants as well with no success.
ShareGPS (on an android phone) and BluetoothGPS on the tablet will work for GPS data from the phone to the tablet over a bluetooth connection. Then WiFi tether for data.
An alternative would be to get a cheap Bluetooth GPS receiver and pair it with the gtab, and use one of several utilities in the market to feed the data to a mapping application of your choice. Kinda how we used to do it in the ppc PDA days.
Thanks I can pair the 2 but, I can not get the phone and GTab to talk to each other. I do have a BT GPS and it pairs it to the GTab. What utility would you suggest to start with to get the GPS to match with the navigation software.
For Turn-by-Turn, why do you still need WiFi?
I bought the external GPS receiver, and Google Maps work, but to get turn-by-turn, I have to WiFi tether to my Droid phone. Why?
jlbdroid said:
I bought the external GPS receiver, and Google Maps work, but to get turn-by-turn, I have to WiFi tether to my Droid phone. Why?
Click to expand...
Click to collapse
Navigation needs connectivity to setup the route. Once the route is setup and 'cached' you can drop your connection, so long as you don't vary from the route. Any re-calculation needs connectivity.
for off-line navigation try Co-Pilot. It's pretty cheap (I Think $5.00 for USA). It stores the map files on your SDcard so no connectivity is needed.
Also, I'm pretty sure the latest google maps starts storing maps tiles locally as you drive around. Thus, the more you use it, the less dependent you are on a live connection.
+1 for bluetooth gps receiver, bluegps to interface, and co-pilot for nav.
I put up a new version of TetherGPS this morning which might solve certain crashing issues. If it still isn't working, and someone wants to help me test fixes (I don't have a g-tab), shoot me an e-mail at [email protected]
going to try out tehter gps since I can't seem to find blue gps to put on my tab. I found sharegps for my phone.
**edit**
Tether GPS Client FC's on me on my gTab running TNT lite.
I believe I've tracked down the FC problem. Give this APK a try. You will only need to install it on your tablet. The server on the phone is unchanged.
This is the lite version, but it includes a full client. If this works I'll push an update to the market for both versions.
http://comptonsoft.com/tethergps/RC/TGPS_Lite.apk
Any feedback would be appreciated. Thanks!
Ok, the last version might not have fixed it, but I'm pretty sure this one does.
If you downloaded the last one, try again, same link.
http://comptonsoft.com/tethergps/RC/TGPS_Lite.apk
I've got TetherGPS working on my Viewsonic g tablet running Brilliant Corners 1.2! The trick, you have to disable "Automatic Broadcast IP" and specify the servers (phones) ip address instead. I have a feeling this will work on other roms too!
1. Enable "use gps satellites" on both devices and enable "allow mock locations" on the tablet.
2. Download and install the latest version of TetherGPS on both devices and Wireless Tether on the phone.
3. Create a network using Wireless Tether. After tethering, the IP address you need can be found in Wireless Tether under menu>access control
4. Run TetherGPS on the phone and uncheck "Automatic Broadcast IP" and enter the IP address from step three into "Broadcast IP" and click Start Server.
5. Run TetherGPS on tablet and select Start Client.
6. Once you have it up and running put the widgets on both devices
Now that (hopefully) everything is working all you have to do next time you want to use this is
1. Start Wireless Tether and establish a connection from tablet.
2. Click TetherGPS server widget on phone.
3. Click TetherGPS client widget on tablet.
Hope this works for you too,
Sandman
tcrews said:
TetherGPS does not wok on VEGAn 5.1.1 on the Gtablet. If I remember correctly, someone tried it on one of the TnT-lite variants as well with no success.
ShareGPS (on an android phone) and BluetoothGPS on the tablet will work for GPS data from the phone to the tablet over a bluetooth connection. Then WiFi tether for data.
Click to expand...
Click to collapse
+1 Share GPS on my HTC Inspire 4G. BluetoothGPS4Droid on my GTab running TNT Lite 4.4. Works like a charm!
Make sure Bluetooth is on on both devices. Make sure you have WiFi on your GTab (to load maps). I use the WiFi Tether program on my HTC Inspire 4G. Start ShareGPS on phone it will be "listening" and watch for the GPS coordinates to show up. Start BluetoothGPS4Droid on GTab, choose the phone device listed on top of settings, select check mark on SiRF GPS, set retrys to 5 and then select Start/Stop GPS. Phone should then recognize the GTab name and show connected. If not, select menu on ShareGPS and connect to. (You should see your device listed but you also have the option to pair if not listed)
Give it up to 1 min to acquire satellites and launch whatever mapping program you use... Enjoy~
Ok I'm reading to pick up one of these bluetooth GPS receivers and get my nook performing GPS duties. What software package is best? As I understand it, there is also some other little piece of software that I need to get the bluetooth info to port into the GPS software. Any ideas?
KDOG2020 said:
Ok I'm reading to pick up one of these bluetooth GPS receivers and get my nook performing GPS duties. What software package is best? As I understand it, there is also some other little piece of software that I need to get the bluetooth info to port into the GPS software. Any ideas?
Click to expand...
Click to collapse
I have had success running CM7 on internal memory with CoPilot Live USA ($4.99 from the market) in conjunction with the free Bluetooth GPS Provider app also in the market. You can't beat that--$4.99 for a 7 inch GPS. I've taken it on a 500 mile trip and it performed perfectly. Stay away from Sygic Aura--it doesn't allow for mock locations.
sec6 said:
I have had success running CM7 on internal memory with CoPilot Live USA ($4.99 from the market) in conjunction with the free Bluetooth GPS Provider app also in the market. You can't beat that--$4.99 for a 7 inch GPS. I've taken it on a 500 mile trip and it performed perfectly. Stay away from Sygic Aura--it doesn't allow for mock locations.
Click to expand...
Click to collapse
Does CoPilot Live require a data connection, or can one download all the mapsets to SD and run completely offline?
tj!2k7 said:
Does CoPilot Live require a data connection, or can one download all the mapsets to SD and run completely offline?
Click to expand...
Click to collapse
Once you download the maps, you're done. No data connection needed. However, I'm not sure how one would pull GPS location from a device with no GPS onboard?
LarcenQ said:
Once you download the maps, you're done. No data connection needed. However, I'm not sure how one would pull GPS location from a device with no GPS onboard?
Click to expand...
Click to collapse
Read original post, he bought an external GPS blue tooth unit which he connects to the nook.
I just use my phone hooked up through an audio jack. I'm lucky enough to live where I don't have to worry about not having a data signal.
Disregard my previous lack of common sense. I can't see the forest for the trees sometimes. I need to look into this Bluetooth adapter. Sounds convenient.
I also have heard there is an additional bit of software needed for this to work as eluded to in my first post. Anyone know what I'm referring to? I will have to check out that CoPilot software.
You need the Bluetooth gps provider app. It's free in the market.
Sent from my NookColor using Tapatalk
sec6 said:
I have had success running CM7 on internal memory with CoPilot Live USA ($4.99 from the market) in conjunction with the free Bluetooth GPS Provider app also in the market. You can't beat that--$4.99 for a 7 inch GPS. I've taken it on a 500 mile trip and it performed perfectly. Stay away from Sygic Aura--it doesn't allow for mock locations.
Click to expand...
Click to collapse
I was just about to buy this app, but the reviews don't look great. You've had good success? Will Google maps store maps? I thought they had implemented an "offline" feature. Are there any other apps that store maps so you don't need to use data?
Sent from my NookColor using Tapatalk
Copilot is usable - but it does have a bug that requires a wifi connection when you first enter a street address and it does not call out street names while navigating
Google maps works but u need a wifi connection to download maps while driving
Calla969 said:
I was just about to buy this app, but the reviews don't look great. You've had good success? Will Google maps store maps? I thought they had implemented an "offline" feature. Are there any other apps that store maps so you don't need to use data?
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Sent from my NookColor using Tapatalk
animatechnica said:
Copilot is usable - but it does have a bug that requires a wifi connection when you first enter a street address and it does not call out street names while navigating
Google maps works but u need a wifi connection to download maps while driving
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
I haven't experienced the bug of having to have the wifi connection on when entering a street address. And as far as not calling out the street names, it does tell you when to take a right (take the next turn right in .3 miles) or left or exit, etc. The street name is displayed on the Nook, so it is quite sufficient. If it called out even the street names what need for the beautiful Nook display?
I use Google Navigator on my phone, same would apply to the NC of course.. Online maps are great until you need to route somewhere when you have no signal.
A few weeks ago I routed to a back-country location, got there no problem. Leaving however, I had no idea how to get back out as I had no cell signal. Had to bust out the old TomTom One from in the trunk.
I haven't looked into CoPilot, but I've heard various bad things about it.. Price is right though, if it's usable. On WM6 I paid lots of money for TomTom + NA maps.
OK, so I bought the CoPilot app, but it just tells my device IMEI number is invalid and won't let me proceed. Any ideas how to get around this?
Calla969 said:
OK, so I bought the CoPilot app, but it just tells my device IMEI number is invalid and won't let me proceed. Any ideas how to get around this?
Click to expand...
Click to collapse
Well that sucks.. Piracy measure I suspect, and our IMEI is of course fake since it's not a phone.
I've seen others claiming that it's working for them, so I'm not ready to give up just yet.
Sent from my Droid using XDA App
Calla969 said:
I've seen others claiming that it's working for them, so I'm not ready to give up just yet.
Sent from my Droid using XDA App
Click to expand...
Click to collapse
Calla969,
What were the installation steps you took after you purchased CoPilot live? Was it the CoPilot Live USA version?
What ROM are you using?
Mine installed fine and is working as we speak. I originally installed CoPilot USA on the SD card with experimental bluetooth rom. Then when I switched over to CM7 on internal memory I restored app and data through titanium backup. I'm currently running it on CM7 tablet tweaks RC1. I'm using a Garmin 10x receiver, bluetooth, mock locations, and satellites enabled, GPS bluetooth provider apk.
*** Edit: Found the problem. It is the most recent update from the market. I got the same IMEI number error. Just restoring now with the previous version (8.2.504). Yes, that's it. Works with this version. Maybe there is a way you can get this version of the apk? PM? ***
Pm sent.
I'm running the latest tablet tweaks version of cm7.
Sent from my NookColor using Tapatalk
Bump. Any suggestions for the best bluetooth receiver to use with the NC? Maybe its time for a NC GPS sub-forum. Just a suggestion?
KDOG2020 said:
Bump. Any suggestions for the best bluetooth receiver to use with the NC? Maybe its time for a NC GPS sub-forum. Just a suggestion?
Click to expand...
Click to collapse
I doubt any of them would differ... I get the same range on both of mine on phone and NC.... Both of them mere inches on the NC, where I get 3-4 feet using my phone.
Personally I like my two GPSes for different reasons... My Holux 236 for its accuracy and robustness. And my Columbus V900 for its built-in datalogger, albiet it being about 4 meters consistently off from its real location and -80 meters in actual Altitude.
CoPilot USA
I sent a trouble ticket into CoPilot USA when I got the IMEI error. They dropped a new version about 3 days ago that fixed that problem. New version is 8.2.0.590. When I can get Bluetooth talking to my GPS receiver, CoPilot USA does work. (I strongly prefer TomTom but the price is right for CoPilot USA!) My ROM PhireMod 6.0
BLUETOOTH QUESTION: What Bluetooth application do you use? I’ve tried BlueGPS for Android (1.2.1) -Error msg “Too amy connection problems”; Bluetooth GPS (Googoo Android V 0.5.5p1) -Error msg “Service Discovery Failed”; and Bluetooth GPS Provider (Works most of the time – but seems unpredictable). I’m interfacing a Bluetooth GPS receiver.
So, is "Bluetooth GPS Receiver" from Market the best Bluetooth App?
[
Hello, i use bluetooth for tethering my Prime with my Desire HD because it consumes less battery than using WIFI-Hotspot. The Problem with this was that the Transformer does not automatically connect to the phone when enabling bluetooth.
So i wrote an App that does exactly this. It reacts on the bluetooth_state_change broadcast and then connects to the phone. The App uses some hidden Api-Calls but seems to work well.
Since i don't have a market account yet, i thought it would be a good idea to upload it here. I attached the apk and the source.
Please comment!
EDIT: Seems to work with any bluetooth device, see posts below
EDIT2: This version is outdated. Please search "Bluetooth auto connect" by refluxa in Google play. I can't post any links here yet. Also it only works with Honeycomb or higher.
redeye86 said:
Hello, i use bluetooth for tethering my Prime with my Desire HD because it consumes less battery than using WIFI-Hotspot. The Problem with this was that the Transformer does not automatically connect to the phone when enabling bluetooth.
So i wrote an App that does exactly this. It reacts on the bluetooth_state_change broadcast and then connects to the phone. The App uses some hidden Api-Calls but seems to work well.
Since i don't have a market account yet, i thought it would be a good idea to upload it here. I attached the apk and the source.
Please comment!
Click to expand...
Click to collapse
THANK YOU!!!!
This is very nice. I tried it and it works perfectly with my GNex, which I've basically been using constantly because wifi sucks. BT tether is the way to go.
redeye86 said:
Hello, i use bluetooth for tethering my Prime with my Desire HD because it consumes less battery than using WIFI-Hotspot. The Problem with this was that the Transformer does not automatically connect to the phone when enabling bluetooth.
So i wrote an App that does exactly this. It reacts on the bluetooth_state_change broadcast and then connects to the phone. The App uses some hidden Api-Calls but seems to work well.
Since i don't have a market account yet, i thought it would be a good idea to upload it here. I attached the apk and the source.
Please comment!
Click to expand...
Click to collapse
Hey thanks. Works great. I use it in combination with bluetooth headset Jabra bt3030. So simple yet so effective.
Maybe you should rename the thread. It's not only good for tethering as you can see
Hi,
sorry for my late answer. Thank you for the comments. I'm glad to hear that it is useful for you, even though i don't know why it works with headsets. I explicitly select the Bluetooth PAN (Personal Area Network) Profile.
Also i registered a developer account now and i think i will publish it there in the next days.
Looks like a very promising app. I tried it, but it crashes periodically on my AT&T Galaxy Note when I turn bluetooth on. Also, the bluetooth connected devices appear disabled - they are a very light color on a white background.
I'd love to help with this, let me know if you need more info or assistance.
Please see updated first post. You will have to wait until Samsung brings your device to ics.
Hello, I have SGS2 with ICS ROM. I have installed Bluetooth Auto Connect from Google Play because my phone doesn't want to connect to my BT car hands free automatically (manual connect always works). The auto connect app shows the name of my hansfree but the selection is unfortunately disabled. Can you please enable also other BT profiles (not only PAN) in your application? It can be very useful for another BT devices too.
Is there any way this app could allow for multiple device selection and have it recognize a "friendly name?" (if you rename the device in your BT panel)
This works great for me in my car to connect my BT, but I have a second transceiver that I use in my house that is identical, so it has the same name, and the software seems to randomly pick one of the two when BT powers up.
Allowing checkboxes for a multiple device selection to start up the BT connections would probably be enough for me, as then "random" will get both every time.
I just updated the app. Now it has support for Tasker / Locale and Multiple Devices!
redeye86 said:
I just updated the app. Now it has support for Tasker / Locale and Multiple Devices!
Click to expand...
Click to collapse
I just found this great app trough a post on the Tasker forum and installed it immediate.
I noticed that if you manually start the app it will ask you to enable BT, but is you use the Tasker plugin it doesn't enable BT.
Of course you can enable BT using Tasker before using the plugin, it would be nice if the plugin had an optin to enable BT.
Beside that, thanks for this great app/plugin.
kantjer said:
I just found this great app trough a post on the Tasker forum and installed it immediate.
I noticed that if you manually start the app it will ask you to enable BT, but is you use the Tasker plugin it doesn't enable BT.
Of course you can enable BT using Tasker before using the plugin, it would be nice if the plugin had an optin to enable BT.
Beside that, thanks for this great app/plugin.
Click to expand...
Click to collapse
Hello,
i will have to ponder on that because tasker / locale developers say that functionality that is already offered by their programs should not be reimplemented in plugins. On the other hand i also see that some users have problems because they do not know that they have to enable bluetooth first. I think i will add a little notice at least.
Have you got a guide (or a link to one) to setup bluetooth tether (HTC One X to Transformer) so I can use this app?
Do you need root on the phone to do it?
Hello, sorry but i just overlooked your post. In general its a good idea to do the whole stuff manually once. First you have to pair your devices and enable bluetooth tethering on the phone (On my non-Sense-Phone: Settings -> More... (in Wireless & Networks Section) -> Tethering and mobile Hotspot). Then on the tablet open the configuration dialog using the button with the three controllers beside the entry of your phone in the bluetooth dialog. Select "use for internet connection". Go back to the previous menu and click on the entry. Now you should be able to use the phones internet connection. This is the point where the apps come into play: The auto tether app enables bluetooth tethering on the phone after reboot (is disabled automatically) and the auto connection app simply initiates the bluetooth connection when enabling bluetooth.
Fantastic app! So useful in conjunction with tasker
I was wondering if there were plans to add a complementary feature: i.e. the possibility to autodisconnect a specific BT device. I'm looking for an app that allows me to do that via tasker to be able to toggle my BT headset connection between my phone and my tablet. I don't think any app can do that yet?
Hello,
it has disconnect functionality now (Version 0.6)!
redeye86 said:
Hello,
it has disconnect functionality now (Version 0.6)!
Click to expand...
Click to collapse
Many thanks for this addition!!
Hello, thank you for your app.
Unfortunately it crashes to me. I set it up so to connect to a joypad (that is, the iPega controller mentioned here: http://forum.xda-developers.com/showthread.php?t=2033780 ).
When I turn bluetooth on, "unfortunately the application has died unexpectedly".
Just reporting.
Thank you very much
I have an iBT bluetooth GPS and have it paired, but don't seem to be able to use it as an alternative to the dongle. I have turned off the internal gps but can't get gps test to recognize it. Does anyone know of a way to make this work? Thanks!
Same to me.
So I tried to connect the internal GPS, and everything was OK.
Now I use Sygic & Copilot live without any problem.
You need "bluetooth gps" app from the play store.
Run it first to connect with your blutooth gps donngle.
It worked great for me.
Sent from my Transformer Prime TF201 using XDA
Make sure you enable Mock locations as well in developer options.
NeoMagus said:
Make sure you enable Mock locations as well in developer options.
Click to expand...
Click to collapse
Thanks Neo, i forgot about that.
You are also able to enable mock locations from the Bluetooth gps app.