I install wrong rom - Xperia mini - Fix NOW ! - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

How To Fix !
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Good LUCK

SEUS recognises it as SK17i, so you must reflash with wotanserver
---------- Post added at 02:19 PM ---------- Previous post was at 02:18 PM ----------
or push ST15i's build.prop into it and then update via seus

not working !
metalrawk said:
SEUS recognises it as SK17i, so you must reflash with wotanserver
---------- Post added at 02:19 PM ---------- Previous post was at 02:18 PM ----------
or push ST15i's build.prop into it and then update via seus
Click to expand...
Click to collapse
I did not answer, but with wotanserver SE51 Flashed!

why so? try flashing ST15i

metalrawk said:
why so? try flashing ST15i
Click to expand...
Click to collapse
ok
Flash through seus what seems to matter?
Why when I install Custom (sk17) HYBROM v5 Touch ROM works, but does it work? What reason?

javad0111 said:
ok
Flash through seus what seems to matter?
Why when I install Custom (sk17) HYBROM v5 Touch ROM works, but does it work? What reason?
Click to expand...
Click to collapse
means touchscreen works when you install sk17i ROM?

What you can do is.
Download the ST15 rom you want,
Reboot Phone into recovery,
Go to Mounts option in CWM, mount the SD Card, Transfer the ROM you want, Flash it, gg.

metalrawk said:
means touchscreen works when you install sk17i ROM?
Click to expand...
Click to collapse
Yes ! I'm really surprised !
dumraden said:
What you can do is.
Download the ST15 rom you want,
Reboot Phone into recovery,
Go to Mounts option in CWM, mount the SD Card, Transfer the ROM you want, Flash it, gg.
Click to expand...
Click to collapse
Custom ROM you mean?
Yes I did but that does not work!
His examples:cm7.2

Did you flashed a new Kernel and see if it works?

nimbold said:
Did you flashed a new Kernel and see if it works?
Click to expand...
Click to collapse
Yes ,But does not work

repair it with pc companion?

metalrawk said:
repair it with pc companion?
Click to expand...
Click to collapse
yes , not working !

I do not know how to solve this problem, I'm gripped?

private !
یا علی​

how? I want to khow how did you fixed it

plz tell me how you did it ....?
plllllllllllllllllllllllllz javad

SOLUTION!
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs

lunatic2nuts said:
Install lastest firmware .62 for st15i. - use Flashtool
Then via CM from zip install hybrom_v10. -minipro
Then reflash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Click to expand...
Click to collapse
the same problem
please javad let us know how did you fix it

Javad,help us please....

same problem here~
---------- Post added at 06:15 PM ---------- Previous post was at 06:03 PM ----------
please help........someone..please

Related

[Q] Manually Flash Koush's ClockworkMod Recovery xperia mini (st15i)

how can i manually Flash Koush's ClockworkMod Recovery in official
4.0.2.A.0.42 ST15i (mini)???
AFAIK you cant. Xperia phones are very weird when it comes to messing around with them. Recoveries are flashed into the kernels themselves.
I, myself cant understand why we cannot have the HTC type of recovery, im sure a dev can answer that one.
the proble is that there isnt any recovery partition but how i i can install it in kernel????
vasilis13 said:
the proble is that there isnt any recovery partition but how i i can install it in kernel????
Click to expand...
Click to collapse
Hello
Here is the thread http://forum.xda-developers.com/showthread.php?t=1227149
knudsen81 said:
Hello
Here is the thread http://forum.xda-developers.com/showthread.php?t=1227149
Click to expand...
Click to collapse
that's for the old version i want for the new one!
vasilis13 said:
that's for the old version i want for the new one!
Click to expand...
Click to collapse
Flash the old one, after root, reboot in fastmode and flash kernel.sin from new firmware, I have root on my 4.0.2 that way
Sent from my ST15i using Tapatalk
knudsen81 said:
Flash the old one, after root, reboot in fastmode and flash kernel.sin from new firmware, I have root on my 4.0.2 that way
Sent from my ST15i using Tapatalk
Click to expand...
Click to collapse
i have root with that way but i want recovery mode!! to make nand back up and install zip
So far there is no way of getting some type of CWM on 2011 Xperia devices. I sugest you either use ADB or wait until a dev comes up with a way to install it.
dumraden said:
So far there is no way of getting some type of CWM on 2011 Xperia devices. I sugest you either use ADB or wait until a dev comes up with a way to install it.
Click to expand...
Click to collapse
I have cwm on my mini ;-)
---------- Post added at 09:14 PM ---------- Previous post was at 09:13 PM ----------
vasilis13 said:
i have root with that way but i want recovery mode!! to make nand back up and install zip
Click to expand...
Click to collapse
Download doom's kernel for mini http://forum.xda-developers.com/showthread.php?t=1234459 it have cwm recovery
knudsen81 said:
Download doom's kernel for mini http://forum.xda-developers.com/showthread.php?t=1234459 it have cwm recovery
Click to expand...
Click to collapse
unfortunalety its oudated, a new FW is avalible: 4.0.2.A.0.42
johndoe441 said:
unfortunalety its oudated, a new FW is avalible: 4.0.2.A.0.42
Click to expand...
Click to collapse
I know i have firmware 4.0.2.a.0.42 and use that kernel ;-)
Edit. Flash boot.img and after that flash kernel.sin from 0.42
knudsen81 said:
I know i have firmware 4.0.2.a.0.42 and use that kernel ;-)
Edit. Flash boot.img and after that flash kernel.sin from 0.42
Click to expand...
Click to collapse
Thats how we doit
Nope ! This doesn't work for me !
It doesn't go to recovery mode !
Where can i find this kernel..(original SE kernel)
2.6.32.9-pref
[email protected] #1
seljachina said:
Where can i find this kernel..(original SE kernel)
2.6.32.9-pref
[email protected] #1
Click to expand...
Click to collapse
original SE kernel is inside the ftf file (along with the rom).

touchscreen and touch keys not working after flashing sk17i firmware,what me doing?

Hi,I have Xperia mini st15i,i cannot restore work touchscreen and keys after wrong flashing to AOSP ICS 4.0.3 sk17i with CWM.....sorry for my bad english...help me please....
Jaroslav285 said:
Hi,I have Xperia mini st15i,i cannot restore work touchscreen and keys after wrong flashing to AOSP ICS 4.0.3 sk17i with CWM.....sorry for my bad english...help me please....
Click to expand...
Click to collapse
You'll have to flash your stock fw via flashtool then again install the correct fw for your st15i
i flashing on flashtool,but touchscreen not working,i flashing stock via flashtool and flash after via seus new firmware, but touchscreen not working
Yes its working but its really black,disnt sure but it should work,turn on phone and slide your finger where is unlock key if it vibrate then you got same problem like me,after flashing touch screen went black and reflashing doesnt fix it.
Sent from my WT19i using Tapatalk
how fix my phone?for work the touch screen and touch keys....
Try reflash it back to the orginal firmware then try again. Something might have gone wrong while you was flashing or the one you flashed was for a different phone.
Thank you, but your advice did not help me,my phone everything not helping, I'm sitting for three days without a phone ...help me please
i am aslo having same problem guys please help...
does anyone know how to get the touchscreen to life, the above does not help ????
Jaroslav285 said:
does anyone know how to get the touchscreen to life, the above does not help ????
Click to expand...
Click to collapse
i was having same problem...so i went to service center and they said touch panel is damage and they replace it without any cost..i think you should go to service center and tell them that your touchscreen is not working and if your bootloader is unlocked they dont tell them that your bootloader is unlocked..
the same thing
any idea
I thanks all users help me,touchscreen sufescully worked.
This is instruction for fix your phones:
How To Fix ! thanks javad0111 and lunatic2nuts...
Original post: http://forum.xda-developers.com/showthread.php?t=1423562
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Dont Forget Thanks for lunatic2nuts and javad0111
Good LUCK
Sorry for my bad english. I've the same problem. After taking my phone to service they told me that fixing will costs about 150€ and I've refused it. So I would like to try these instuctions:
1) OK
2) hybromV10 DL: https: // dl.dropbox.com/u/61884099/hybrom_v10.zip OK but I've no CWM installed and I'm not root, how can I install it?
3) OK
You've been unlock bootloader first bro to install custom kernel to make your CWM and Root Access,,
Sent from my ST15i using xda premium
Didnt work for me
Jaroslav285 said:
I thanks all users help me,touchscreen sufescully worked.
This is instruction for fix your phones:
How To Fix ! thanks javad0111 and lunatic2nuts...
Original post: http://forum.xda-developers.com/showthread.php?t=1423562
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Dont Forget Thanks for lunatic2nuts and javad0111
Good LUCK
Click to expand...
Click to collapse
didnt work for me...tried but no worth...
any other soln.>??:crying:

x10 mini pro boot problem

Hi when i flash the ROM minicm7 it say no errors but
when i gonna boot my kernel logo shows up but not then minicm7 logo and never starts
My kernel is U20_nAa-13_2.6.29.6-nAa-13 and i have unlocked bootloader!
Thx in advance!:good:
And how i change to stock kernel???
TemplexZ said:
Hi when i flash the ROM minicm7 it say no errors but
when i gonna boot my kernel logo shows up but not then minicm7 logo and never starts
My kernel is U20_nAa-13_2.6.29.6-nAa-13 and i have unlocked bootloader!
Thx in advance!:good:
Click to expand...
Click to collapse
Did you do:
wipe data/factory reset
wipe cache
advanced - wipe dalvik-cache
that might solve the problem.
otherwise maybe either the rom or the kernel is corrupted, download them fresh and reinstall both.
---------- Post added at 05:30 PM ---------- Previous post was at 05:29 PM ----------
TemplexZ said:
And how i change to stock kernel???
Click to expand...
Click to collapse
repair using seus or pc-companion gets you back on stock firmware including kernel, your bootloader will still be unlocked.
or look in the x10mini pro development section, there might be stock kernels for flashtool available for download.
SmG67 said:
Did you do:
wipe data/factory reset
wipe cache
advanced - wipe dalvik-cache
that might solve the problem.
otherwise maybe either the rom or the kernel is corrupted, download them fresh and reinstall both.
---------- Post added at 05:30 PM ---------- Previous post was at 05:29 PM ----------
repair using seus or pc-companion gets you back on stock firmware including kernel, your bootloader will still be unlocked.
or look in the x10mini pro development section, there might be stock kernels for flashtool available for download.
Click to expand...
Click to collapse
I tested do wipe data and wipe cache and dalvik.
But i gonna try download the rom and kernel again and flash them! Thx for answer!!:victory:
Hie TemplexZ,
But I gonna try download the ROM and kernel again and flash them! Thx for the answer!!
Click to expand...
Click to collapse
It's working ?
Because I think I have the same problem of you, but I've already tried to download the same kernel and other and the problem is always here : /
Have you got a solution ?
La_Louve said:
Hie TemplexZ,
It's working ?
Because I think I have the same problem of you, but I've already tried to download the same kernel and other and the problem is always here : /
Have you got a solution ?
Click to expand...
Click to collapse
Hi it never worked so i change to minicm9 it is awesome!!
So i think you should do that! Flash nAa ics kernel and minicm9 ROM!
Plz hit that thx button!
Sent from my U20i using xda app-developers app

[Q] Reboot problem, rooted phone with two installed apps by cwm :/

Hi all!
(Well, I have to start with that I'm hungarian so sorry for my english.)
I dont know if anyone has already mentioned this problem in other threads but i didnt find any. So my problem is that I rooted my phone with changing kernel (neoV 4.0.3) after that rooting and after rooting upgrading the latest mini pro kernel in my phone (4.1.B.0.587).
There was no problem i have managed to root my phone. After that i downloaded the cwm auto installer app from play and installed cwm. After that i installed two apps with cwm, exactly: http://forum.xda-developers.com/showthread.php?t=1705352&highlight=root
and http://forum.xda-developers.com/showthread.php?t=1695048
After these steps i realised that my girlfriend wanted to call me but it was a missed call so i tried to call her back. And HERE IS THE PROBLEM: when i touch on the button with the green phone icon before starting to call anyone my phone collapsed and reboots itself.
Well i dont know if the problem comes from the root (maybe i did something wrong but got good result) or from the 2 apps installed with cwm and there i made some mistakes :/ well i dont know i think i did everything well but as i said i really dont know what the problem is.
Please help me!! Thank you in advance
Post the links of those two apps properly... Unable to click them directly
And as you said your phone is NEO V or Mini Pro
then why did you upload the "neo v" "latest mini pro kernel" :what::sly::banghead:
Specify your phone and kernel properly or upload a screenshot
And if you have you have installed mini pro kernel in neo V or vice versa
Then flash stock firmware via flashtool
Sent from my Smultron running CM10
I have mini pro(sk17i), but as you know mini pros dont have 4.0.3 kernel and rom cause the first ics was the 4.0.4 so i just chose a random 4.0.3 kernel (neov) and rooted that one and after the root i put the original sk17i kernel 4.1.B.0.587 back. and after that i got root permissions in my 4.0.4 ics phone with its official latest kernel. Thats all. I just followed the steps to root. and now you can see the apps' urls
Another bad news: when i plugged in my phone to raise the battery's levél the phone rebooted again
Sent from my SK17i using xda premium
krissztyoon said:
Another bad news: when i plugged in my phone to raise the battery's levél the phone rebooted again
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
I think you installed an inappropriate kernel for your device...
Download the stock firmware for your device... Flash it via Flashtool
Then again unlock your bootloader
And this time install any supported kernel like Kamarush v3 or Kernel Panic... I mean any prerooted kernel... And after you get root access just switch to latest firmware... And .587 is whole new stock firmware Not kernel...
Sent from my Smultron running CM10 by
---------- Post added at 07:12 AM ---------- Previous post was at 07:07 AM ----------
The Walkman app you tried sucks...
http://forum.xda-developers.com/showthread.php?t=1856186
Flash it... And see the difference :thumbup:
Sent from my Smultron running CM10 by
U don't necessarily have to install the neo v firmware
u can install GB, root it and then upgrade to .587 with the rooting method you followed
PREDATOR95 said:
I think you installed an inappropriate kernel for your device...
Download the stock firmware for your device... Flash it via Flashtool
Then again unlock your bootloader
And this time install any supported kernel like Kamarush v3 or Kernel Panic... I mean any prerooted kernel... And after you get root access just switch to latest firmware... And .587 is whole new stock firmware Not kernel...
Sent from my Smultron running CM10 by
---------- Post added at 07:12 AM ---------- Previous post was at 07:07 AM ----------
The Walkman app you tried sucks...
http://forum.xda-developers.com/showthread.php?t=1856186
Flash it... And see the difference :thumbup:
Sent from my Smultron running CM10 by
Click to expand...
Click to collapse
Well i dont know but i cant unlock my bl cause my simcard and phone is a vodafone stuff. And i read that if your phone is a vodafone or tmobile or telenor device than you cant unlock your bl. But after my lesson i repair my os and try again.
Sent from my SK17i using xda premium
Viper0110 said:
U don't necessarily have to install the neo v firmware
u can install GB, root it and then upgrade to .587 with the rooting method you followed
Click to expand...
Click to collapse
Thx. I will try with a stock gb kernel and then change back the latest kernel 587
Sent from my SK17i using xda premium
Well, I managed to root my phone and now i can call anyone without reboot but i havent installed those 2 apps yet. im afraid of having this problem because of those apps :/
but i also havent tried to install that app which you Predator offered me :/ im afraid of having another problem :/ and i also dont know if my phone (sk17i) is capable of running walkman player app or such as walkman player :/ pls correct me if im right or not
Hmmmmm.....
1.flash stock firmware into your XMP...
2.unlock the bootloader...
3.flash any custom kernel that have pre-rooted and CWM....
4.problem solved....
Btw, correct me if i'm wrong but isn't flashing other kernel (neo v in your case) is proof that your phone bootloader is already unlock????
My bootloader is not unlocked because im having a vodafone phone so not an unlocked phone :/ And i heard that unlocking a locked phone is very difficult and dangerous :/ ....

[Q] Flashing kernel before root

I own Sony Xperia Sola running ICS build no. 6.1.1.B.1.54.
Iwant to root my phone should I flash kernel to 6.1.1.B.1.10. before rooting. And then flash back again to 6.1.1.B.1.54
No the complet Firmware .10 and then back to .54.
My englisch is very Bad
Gesendet von meinem MT27i mit Tapatalk
werder-96 said:
No the complet Firmware .10 and then back to .54.
My englisch is very Bad
Gesendet von meinem MT27i mit Tapatalk
Click to expand...
Click to collapse
I tried to flash to .10 but the it said connect device in USB Debugging.
I connected it in Debugging by tick the usb debugging in developers.
But flashtool said connect it in debugging mode.
HELP CAUSE I AM NOT ABLE ROOT.
Hi I am beginner in this area and could not do the tutorial on this link
http://http://forum.xda-developers.com/showthread.php?t=2258058
Detail: I did not follow the video tutorial, only the instructions below it.
So my device no longer starts, caught on home screen (I used the Phantom Kernel)
Please: what I did wrong and how I fix it :crying:
smit_96 said:
I own Sony Xperia Sola running ICS build no. 6.1.1.B.1.54.
Iwant to root my phone should I flash kernel to 6.1.1.B.1.10. before rooting. And then flash back again to 6.1.1.B.1.54
Click to expand...
Click to collapse
no you shouldn't,just root your phone,you can see tutorial how to root your phone on youtube...
---------- Post added at 01:17 AM ---------- Previous post was at 01:12 AM ----------
Isak_Rz said:
Hi I am beginner in this area and could not do the tutorial on this link
http://http://forum.xda-developers.com/showthread.php?t=2258058
Detail: I did not follow the video tutorial, only the instructions below it.
So my device no longer starts, caught on home screen (I used the Phantom Kernel)
Please: what I did wrong and how I fix it :crying:
Click to expand...
Click to collapse
what phone you used?
jjssore said:
no you shouldn't,just root your phone,you can see tutorial how to root your phone on youtube...
---------- Post added at 01:17 AM ---------- Previous post was at 01:12 AM ----------
what phone you used?
Click to expand...
Click to collapse
Xperia P.
Isak_Rz said:
Xperia P.
Click to expand...
Click to collapse
if you had bootloop,you must flashing your phone with stock rom and then root your phone again...
to easy root your phone use kingo android root via online ok...
jjssore said:
no you shouldn't,just root your phone,you can see tutorial how to root your phone on youtube...
---------- Post added at 01:17 AM ---------- Previous post was at 01:12 AM ----------
what phone you used?
Click to expand...
Click to collapse
I saw the tutorial on youtube and did the same way but i could not flash my device to .10
Flashtool said to enter in debugging mode but I already ticked it in develope
jjssore said:
if you had bootloop,you must flashing your phone with stock rom and then root your phone again...
to easy root your phone use kingo android root via online ok...
Click to expand...
Click to collapse
Ok. So I have to put a stock rom, this root stock rom again and then try to install the Rom MoonBreaker.
Two more things: I do not have stock rom JellyBean, but could not find the forum. And most importantly: the kernel installed on my device works on any rom or any rom have to be a specific kernel?
Sorry for many questions.
Annex Photo kernel version.
Isak_Rz said:
Ok. So I have to put a stock rom, this root stock rom again and then try to install the Rom MoonBreaker.
Two more things: I do not have stock rom JellyBean, but could not find the forum. And most importantly: the kernel installed on my device works on any rom or any rom have to be a specific kernel?
Sorry for many questions.
Annex Photo kernel version.
Click to expand...
Click to collapse
for question 1 :yes
until now sony not yet release jb for xperia p maybe later. about kernel you can use current kernel or use modification kernel,its will work for any rom.
jjssore said:
for question 1 :yes
until now sony not yet release jb for xperia p maybe later. about kernel you can use current kernel or use modification kernel,its will work for any rom.
Click to expand...
Click to collapse
@jjssore
How Sony didn't release JB for XP??
Do you even cgeck the XP development ??
We have already JB for a long time for our XP !!!
Lol hahahaha !!!!
@Isak_Rz
Just look here:
http://forum.xda-developers.com/showthread.php?t=1938296
Flash the JB 1.100 ftf with flashtool and you dont need root for it and after flashing that ftf you can root it and install cwm ( The one for ICS works also on JB ) then you can flash any JB custom for locked bootloaders !!
Search and read before posting a new thread then you will learn and please dont post questions after questions !!
Sent from my LT22i using Tapatalk
Here 6.1.1.B.1.B is build no or kernel

Categories

Resources