Hi when i flash the ROM minicm7 it say no errors but
when i gonna boot my kernel logo shows up but not then minicm7 logo and never starts
My kernel is U20_nAa-13_2.6.29.6-nAa-13 and i have unlocked bootloader!
Thx in advance!:good:
And how i change to stock kernel???
TemplexZ said:
Hi when i flash the ROM minicm7 it say no errors but
when i gonna boot my kernel logo shows up but not then minicm7 logo and never starts
My kernel is U20_nAa-13_2.6.29.6-nAa-13 and i have unlocked bootloader!
Thx in advance!:good:
Click to expand...
Click to collapse
Did you do:
wipe data/factory reset
wipe cache
advanced - wipe dalvik-cache
that might solve the problem.
otherwise maybe either the rom or the kernel is corrupted, download them fresh and reinstall both.
---------- Post added at 05:30 PM ---------- Previous post was at 05:29 PM ----------
TemplexZ said:
And how i change to stock kernel???
Click to expand...
Click to collapse
repair using seus or pc-companion gets you back on stock firmware including kernel, your bootloader will still be unlocked.
or look in the x10mini pro development section, there might be stock kernels for flashtool available for download.
SmG67 said:
Did you do:
wipe data/factory reset
wipe cache
advanced - wipe dalvik-cache
that might solve the problem.
otherwise maybe either the rom or the kernel is corrupted, download them fresh and reinstall both.
---------- Post added at 05:30 PM ---------- Previous post was at 05:29 PM ----------
repair using seus or pc-companion gets you back on stock firmware including kernel, your bootloader will still be unlocked.
or look in the x10mini pro development section, there might be stock kernels for flashtool available for download.
Click to expand...
Click to collapse
I tested do wipe data and wipe cache and dalvik.
But i gonna try download the rom and kernel again and flash them! Thx for answer!!:victory:
Hie TemplexZ,
But I gonna try download the ROM and kernel again and flash them! Thx for the answer!!
Click to expand...
Click to collapse
It's working ?
Because I think I have the same problem of you, but I've already tried to download the same kernel and other and the problem is always here : /
Have you got a solution ?
La_Louve said:
Hie TemplexZ,
It's working ?
Because I think I have the same problem of you, but I've already tried to download the same kernel and other and the problem is always here : /
Have you got a solution ?
Click to expand...
Click to collapse
Hi it never worked so i change to minicm9 it is awesome!!
So i think you should do that! Flash nAa ics kernel and minicm9 ROM!
Plz hit that thx button!
Sent from my U20i using xda app-developers app
Related
I've searched around and can't seem to find the solution.
I'm on WB5 w/ Doomkernel and I want to go back to 2.1, and try a fresh reinstall of everything, including unlocking my bootloader (which I also don't know how to do, since I'm using doomkernel for locked bootloaders and there's one for unlocked, and I don't want to mess up anything).
Thanks to any who answer
download stock 2.1 ROM..then flash it with Xrecovery.make afull wipe- if u used 2.1 custom ROM i prefer just wipe cache partition-.
remove ur battery,enter flash mode and flash 2.1 Kernel with flashtool. u r done
---------- Post added at 10:57 PM ---------- Previous post was at 10:57 PM ----------
download stock 2.1 ROM..then flash it with Xrecovery.make afull wipe- if u used 2.1 custom ROM i prefer just wipe cache partition-.
remove ur battery,enter flash mode and flash 2.1 Kernel with flashtool. u r done
romasalah said:
download stock 2.1 ROM..then flash it with Xrecovery.make afull wipe- if u used 2.1 custom ROM i prefer just wipe cache partition-.
remove ur battery,enter flash mode and flash 2.1 Kernel with flashtool. u r done
---------- Post added at 10:57 PM ---------- Previous post was at 10:57 PM ----------
download stock 2.1 ROM..then flash it with Xrecovery.make afull wipe- if u used 2.1 custom ROM i prefer just wipe cache partition-.
remove ur battery,enter flash mode and flash 2.1 Kernel with flashtool. u r done
Click to expand...
Click to collapse
You can't flash a whole stock rom with xRecovery, since you can't flash kernels and basebands through it.
You should use flashtool to downgrade your phone.
Sent from my X10i using XDA App
Alright, I'll try it on the weekend. Thanks for the replies
aR_ChRiS said:
You can't flash a whole stock rom with xRecovery, since you can't flash kernels and basebands through it.
You should use flashtool to downgrade your phone.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Im on the new WB 5.00c and want to downgrade to 2.1.A.0.435 Global Generic ROM - Root / JIT v2 / xRecovery - Working WiFi (http://forum.xda-developers.com/showthread.php?t=936462)
it also includes a base band. Should I downgrade from the current 71 based one, after i flash the rom listed? I am as little unsure as I have always upgraded upwards. Was not sure if there was an incompatibility. I should know this by now as I have flashed many roms with xrec and flashtool also. My whole intention is to unlock the bootloader. I dont mind a full down grade since I have found 2 major issues with the wb rom, and may or may not upgrade back to it. Just need a reassurance is all.
unimatrix725 said:
Im on the new WB 5.00c and want to downgrade to 2.1.A.0.435 Global Generic ROM - Root / JIT v2 / xRecovery - Working WiFi (http://forum.xda-developers.com/showthread.php?t=936462)
it also includes a base band. Should I downgrade from the current 71 based one, after i flash the rom listed? I am as little unsure as I have always upgraded upwards. Was not sure if there was an incompatibility. I should know this by now as I have flashed many roms with xrec and flashtool also. My whole intention is to unlock the bootloader. I dont mind a full down grade since I have found 2 major issues with the wb rom, and may or may not upgrade back to it. Just need a reassurance is all.
Click to expand...
Click to collapse
Whenever you flash a firmware either upgrading or downgrading, just make sure that you flash the proper/compatible baseband and kernel files. These are generally provided with the firmware in the form of .tft file or the proper kernel is mentioned in the post itself!!
Here is a list of all the firmwares!!
Simply flash using Flashtool. Link is mentioned in the post itself!!
Edit: you can try the firmware mentioned in the link. Just remember to flash the Firmware files using flashtool as mentioned!!
Regards
kLouD
Thanks always helps to have reassurances!
How To Fix !
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Good LUCK
SEUS recognises it as SK17i, so you must reflash with wotanserver
---------- Post added at 02:19 PM ---------- Previous post was at 02:18 PM ----------
or push ST15i's build.prop into it and then update via seus
not working !
metalrawk said:
SEUS recognises it as SK17i, so you must reflash with wotanserver
---------- Post added at 02:19 PM ---------- Previous post was at 02:18 PM ----------
or push ST15i's build.prop into it and then update via seus
Click to expand...
Click to collapse
I did not answer, but with wotanserver SE51 Flashed!
why so? try flashing ST15i
metalrawk said:
why so? try flashing ST15i
Click to expand...
Click to collapse
ok
Flash through seus what seems to matter?
Why when I install Custom (sk17) HYBROM v5 Touch ROM works, but does it work? What reason?
javad0111 said:
ok
Flash through seus what seems to matter?
Why when I install Custom (sk17) HYBROM v5 Touch ROM works, but does it work? What reason?
Click to expand...
Click to collapse
means touchscreen works when you install sk17i ROM?
What you can do is.
Download the ST15 rom you want,
Reboot Phone into recovery,
Go to Mounts option in CWM, mount the SD Card, Transfer the ROM you want, Flash it, gg.
metalrawk said:
means touchscreen works when you install sk17i ROM?
Click to expand...
Click to collapse
Yes ! I'm really surprised !
dumraden said:
What you can do is.
Download the ST15 rom you want,
Reboot Phone into recovery,
Go to Mounts option in CWM, mount the SD Card, Transfer the ROM you want, Flash it, gg.
Click to expand...
Click to collapse
Custom ROM you mean?
Yes I did but that does not work!
His examples:cm7.2
Did you flashed a new Kernel and see if it works?
nimbold said:
Did you flashed a new Kernel and see if it works?
Click to expand...
Click to collapse
Yes ,But does not work
repair it with pc companion?
metalrawk said:
repair it with pc companion?
Click to expand...
Click to collapse
yes , not working !
I do not know how to solve this problem, I'm gripped?
private !
یا علی
how? I want to khow how did you fixed it
plz tell me how you did it ....?
plllllllllllllllllllllllllz javad
SOLUTION!
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
lunatic2nuts said:
Install lastest firmware .62 for st15i. - use Flashtool
Then via CM from zip install hybrom_v10. -minipro
Then reflash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Click to expand...
Click to collapse
the same problem
please javad let us know how did you fix it
Javad,help us please....
same problem here~
---------- Post added at 06:15 PM ---------- Previous post was at 06:03 PM ----------
please help........someone..please
This is what I do(with a new neo V):
1.Flash to 0.42
2.Root(zergrush)
3.OTA to 0.62
4.Bootloader unlock!(s1tool)
Then, when I install rom(http://forum.xda-developers.com/showthread.php?t=1566168) and do the all instruction.MY PHONE STUCK AT THE SE LOGO!!
And I flash it back to original 0.42, do all things again.IT STUCK AGAIN!!
Could anyone help me?
Thanks!
That is the risk unlocking by unofficial method...anyway...flash nightelf kernelV9 and then reboot in recovery...wipe data,cache,dalvik and fix permissions...reinstall the Rom...hope it fixes the problem...if u have not damaged the bootloader...then u can recover your phone easily.
Sent from my MT11i using XDA
try wiping everything, system,data,cache,dalvik cache.
---------- Post added at 11:06 AM ---------- Previous post was at 11:03 AM ----------
unisol107 said:
That is the risk unlocking by unofficial method
Click to expand...
Click to collapse
what is the risk?
If not carefully done...one can damage the trim area and the repair of damaged trim area on s1tool website is paid service...anyways...not risky for experienced guys but for an amateur...it is definitely risky playing with the hardware....if I m not mistaking, this is the pin pint method with s1tool...right?
Sent from my MT11i using XDA
Messing with hardware is always tricky. I used test point method with s1tool, few times it cable slipped to wrong test point, but phone is ok
Anw, I was asking why you related this method to his problem.
What he should try first is to wipe everything. Stucking at boot screen is sometimes problem of not wiping system partition. Of course under condition that he DID flashed night-elf kernel
bcoz he said that he flashed the rom and it stuck on se logo..that means the phone is unable to boot...it is normal if proper wiping isnt done...but then he says he reverted to stock .42...must have done by flashtool...so...if he flashes .42 it will overwrite everything and should boot normally....but it doesnt....so i thought it may be a hardware failure due to improper unlocking.
now...if he flashed only system and left the kernel...then it is possible that the kernel is not properly installed.
anyways...u have much knowledge...i m just guessing.
---------- Post added at 05:03 PM ---------- Previous post was at 04:55 PM ----------
sorry...i misunderstood his problem...he said he repeated everything from scratch...and i took it as he cant boot even on stock...my apologies.
using a different kernel may help..perhaps...but i flashed the same rom yesterday with nightelf's v9 and didnt face any problem.
I tryed it but not works fine.
cashacker said:
I tryed it but not works fine.
Click to expand...
Click to collapse
what did you tried?
Thanks!
But, I can flash it to stock 0.42 and open it.
All things work!
However, after I do all things, I install rom by cwm.
IT STUCKS AGAIN!WHY!
This time...flash whole .62 ftf and then flash nightelfv9 ...now install the rom and do as instructed in the rom thread.
I think it is the recovery that is causing problem.
Sent from my MT11i using XDA
What baseband do u have? First flash. 62 then nightelf kernel with built in recovery...report.
Sent from my MT11i using XDA
shoutrobert said:
However, after I do all things, I install rom by cwm.
IT STUCKS AGAIN!WHY!
Click to expand...
Click to collapse
Did you wipe everything what has been said in this thread?
unisol107 said:
What baseband do u have? First flash. 62 then nightelf kernel with built in recovery...report.
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Yes,I'm agree with you.
as it said in Rom thread you must have .62 stock and also you must have nightelf kernel for stock ,you can download from its own thread and note that kernel your picking is for which kind of Roms
Good luck
Hey there, I downgraded my Xperia Mini on .42FW, rooted it with Flashtool and made the Bootloader Unlock. After that I tried to flash the Boot_smultron_V2_Lite Kernel and the only result I got is a Boot-Loop with revolving Sony Ericsson Logo.
What is wrong? I tried it several times, with different bootloaders also...
Pls help me
MAGIo18 said:
Hey there, I downgraded my Xperia Mini on .42FW, rooted it with Flashtool and made the Bootloader Unlock. After that I tried to flash the Boot_smultron_V2_Lite Kernel and the only result I got is a Boot-Loop with revolving Sony Ericsson Logo.
What is wrong? I tried it several times, with different bootloaders also...
Pls help me
Click to expand...
Click to collapse
did u install any rom on that kernel??? or just flashed only kernel??
I installed several ROMs with Recovery Console... BootLoop
MAGIo18 said:
I installed several ROMs with Recovery Console... BootLoop
Click to expand...
Click to collapse
only one kernel matchs with its rom.. u have to install kernel that supports ur rom.
Ok, which Kernel for Cyanogenmod 7 or 9 / FreeXperia?
I can't find any on their pages...
MAGIo18 said:
Ok, which Kernel for Cyanogenmod 7 or 9 / FreeXperia?
I can't find any on their pages...
Click to expand...
Click to collapse
try this ROM
and a KERNEL that matches above rom
maybe it could be an issue that I am using a ST15a device, bc it shows me an error in the Recovery console saying ST15a and Smultron are different.
MAGIo18 said:
Ok, which Kernel for Cyanogenmod 7 or 9 / FreeXperia?
I can't find any on their pages...
Click to expand...
Click to collapse
the kernel for cyanogenmods will be in the rom itself u just have to extract boot.img file from zip and flash kernel then flash rom from recovery thats it....
---------- Post added at 04:37 PM ---------- Previous post was at 04:35 PM ----------
MAGIo18 said:
maybe it could be an issue that I am using a ST15a device, bc it shows me an error in the Recovery console saying ST15a and Smultron are different.
Click to expand...
Click to collapse
i dont think so.. it can run st15i kernel and rom!!
please help.......i rooted my sk17i using this guide http://forum.xda-developers.com/showthread.php?t=2118343 and unlocked bootloader using "Automatic with the SE Bootloader Unlocking Tool by quangnhut123" and installed cwm using RecoverX....then i flashed http://forum.xda-developers.com/showthread.php?t=1991371 this rom following the instructions For Unlocked Bootloaders:
1.Enter cwm
2.wipe factory/data
3.wipe cache
4.format system
5.wipe dalvik cacahe
6.Put the rom on SD Card
7.Flash the rom (choose 1st install in aroma)
8.Reboot
9.again reboot to cwm
10.flash the Utlimate HD mod
11.reboot
except nmbr 10......then i restart the phone nd its stuck at SONY LOGO ...i cant access to cwm also....PLEASE HELP!!!!
This section is not for q/a and btw just reflash stock Rom using flashtool and then root again then flash the Rom with correct instructions... and next time no need to pm me(if u have question) and that too twice...:sly:
Press THANKS if I helped,
Best Regards,
AJ
alokbina said:
This section is not for q/a and btw just reflash stock Rom using flashtool and then root again then flash the Rom with correct instructions... and next time no need to pm me(if u have question) and that too twice...:sly:
Press THANKS if I helped,
Best Regards,
AJ
Click to expand...
Click to collapse
ok....actually thought it was q/a section....thanks
you are doing it in the wrong way. RecoverX is installing a recovery mode to your SYSTEM partition. when you are flashing the new rom you are formatting that partition. so you can't go back to cwm. First flash a kernel with a recovery mode then you can go to cwm whenever you want. hope this helps you.
---------- Post added at 04:40 PM ---------- Previous post was at 04:35 PM ----------
you can find a list of kernels with links from here
RavinduSha said:
you are doing it in the wrong way. RecoverX is installing a recovery mode to your SYSTEM partition. when you are flashing the new rom you are formatting that partition. so you can't go back to cwm. First flash a kernel with a recovery mode then you can go to cwm whenever you want. hope this helps you.
---------- Post added at 04:40 PM ---------- Previous post was at 04:35 PM ----------
you can find a list of kernels with links from here
Click to expand...
Click to collapse
thanks for replying.......are the setps like this?...first root..then unlock bootloader....then flash a kernel with cwm ??
rokilmr said:
thanks for replying.......are the setps like this?...first root..then unlock bootloader....then flash a kernel with cwm ??
Click to expand...
Click to collapse
Nope, just flash the kernel. The bootloader won't be relocked by flashing the stock rom, so you don't need to unlock it. The kernel is prerooted, so it will root the rom that is installed. Just flash a custom kernel for ics (guess ultimate hd is an ics rom), boot in cwm, install the rom and see what happens
rokilmr said:
thanks for replying.......are the setps like this?...first root..then unlock bootloader....then flash a kernel with cwm ??
Click to expand...
Click to collapse
just flash a kernel with a cwm recovery and turn on the device. [because u have already unlocked bootloader, u can flash any kernel at anytime]
thanks a lot guys.....i will now flash a kernel and flash the rom.....thanks
rokilmr said:
thanks a lot guys.....i will now flash a kernel and flash the rom.....thanks
Click to expand...
Click to collapse
post your result here and if it solved your problem please remember to mark this thread with [SOLVED] tag.
RavinduSha said:
post your result here and if it solved your problem please remember to mark this thread with [SOLVED] tag.
Click to expand...
Click to collapse
yes sure...after return home...thanks
Flash kernel etc. Mesa and there you have a recovery.
Sent from my SK17i using xda app-developers app