[Q] Nex-S rom. - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Followed instructions completely after install going to boot screen it made my tab looked like it was fryed reloaded another rom just fine.? Not sure has anyone else had this problem would love to ask in actual thread but no permissions to. Wish xda would give newer people a little more credit with their questions, the development site here is awesome and so are the developers.

worked perfectly fine for me. A couple reboots later after my restoring apps and it's running like a champ.

One more time
Ill try it again, have you ever seen a distorted screen. ?

xterra91 said:
Ill try it again, have you ever seen a distorted screen. ?
Click to expand...
Click to collapse
Not with the tab.

Related

Eugene releases new hero to slide beta

Eugene has produced a new ROM. I didn't format the title because it is not my ROM to post, but I wanted to share the link for people in the meantime.
Hero To Slide Beta:
http://forum.androidspin.com/showthread.php?p=14095#post14095
Keyboard lights work
You should still format the title properly, just give credit to Eugene...
WHEN DID THIS HAPPEN?!? how the heck did i miss this lol i peruse the forums a ton i figured i'd see somethign like this haha
kingofyo1 said:
WHEN DID THIS HAPPEN?!? how the heck did i miss this lol i peruse the forums a ton i figured i'd see somethign like this haha
Click to expand...
Click to collapse
He posted it late last night on twitter
Has anyone flashed this rom? I'm not too interested in ports on my Slide, but I'd like to hear the thoughts of people who have installed this.
Personally, I'm sticking with SlideM until CM5/6 arrives for the Slide.
i flashed it.....It stalls,big time for me...and before anyone goes"did you wipe(lol)" yes I did...ohh and did the mount system to but to no avail still stalls and freezes!
But it is fast but just freezes too much...went back to slide m
on another note, which do you guys like better SlideM or the Legend rom?
Did you run your log cat to see that it was indeed frozen
Remember Custom ROMS can take up to 15 minutes to flash in some cases, although on this phone I dont think it will ever be that high.
I thought mine was frozen but it turned out it just needed 7 minutes or so to load.
The logcat looked plenty busy
Thanks to kingofyo1 for teaching me how to check if the phone actually is frozen
anyways ill be sticking to the SLIDEM rom till someone builds a good kernal to overclock or a froyo rom or CM rom.
Mine kept freezing too .. But I didn't check my logcat..
Been loving legend... Except for no genius button...
Sent from my T-Mobile myTouch 3G Slide using XDA App
well i flashed it, and im at work, so cant logcat.. and i tried installing setcpu, because the kernel looked slightly different, i was thinking he may have implemented the OC kernel(hopes and dreams ) and i got a lock. restarted and then tried setcpu again, and locks still there >.< so i am guessing either superuser is messed up or something, will try a different root program and see if possibly its the program or the superuser.. overall its a good looking rom, check back on my slide bible for my scores if interested
I just clocked it. 3 minutes 14 seconds
After about 51 seconds you will get the little heropetit image. than an HTC for the remaining time.
Just relax and go away from the phone for a few minutes. I also filmed this.
So yea....i used it like i said...and im already back on using SlideM
BTW i changed a tire while this was loading and was still stuck after multiple boots.
OMFG 3.8 LINPACK!!! and second time is 3.3, 3rd is 3.5 4th is 4!!! 5th -8 is 4.1
can you say quickest slide rom to date??
kingofyo1 said:
OMFG 3.8 LINPACK!!! and second time is 3.3, 3rd is 3.5 4th is 4!!! 5th -8 is 4.1
can you say quickest slide rom to date??
Click to expand...
Click to collapse
Any luck with SetCPU?
HebrewToYou said:
Any luck with SetCPU?
Click to expand...
Click to collapse
working on it... no such luck yet, i'll post if i can get it working :/
newest ver of setcpu makes device unresponsive >.< never get a su request either on it >.>
Eugene has been working on a kernal to let us overclock. I saw some pics from him posted some where last night.
the superuser.apk is out of whack.. replacing it now and we will see what happens guys. wish me luck? lol
EDIT: cant seem to drop the stock su, dont have adb at this time with me so i cant do it that way either.. anyone else having troubles with su perms?
Tried it again and it boots.....but then just freezes.....i tried to uninstall superuser and wouldnt but installed setcpu.apk and opened her up and now my phone is stuck/frozen/locked up.....
Will be staying on SlideM till these issues are resolved
my biggest issue is the trackpad is messed up,
up=right
down=left
left=up
right=down
there are also some graphical issues that aren't incredibly bothersome, but stuff is just a little offcenter in landscape
if someone is a member of the community where eugene's original post is hosted, would you mind copying the images he attached over here?

[Q] Having problems after rooting Vibrant

I'm new to the forum and was successful getting android on a htc hd2 but I'm having issues after "sucessfully" getting F1 JVP Mod V9 on my samsung vibrant for the second time. I was able to solve the media scanner FC but i have certain apps that are also fc on boot up, i also have problems getting the phone to unlock my sim card. Another problem deals with the home and search buttons not operationg properly. In their current state, they act like "tab" buttons. I'm just clueless on how to fix it now. Someone please help
Sounds like you flashed a Rom not for the vibrant. Odin back to stock and pick a Rom out of our development section
Sent from my SGH-T959 using XDA App
I thought i did, i used 2 F1 roms(v6&v9) and the same results.
If this is the rom you're talking about then no, its not for our phone.
wow, i feel like an idiot now. Then how do i tell which works for the vibrant out of the list on this page?
jerzykid said:
wow, i feel like an idiot now. Then how do i tell which works for the vibrant out of the list on this page?
Click to expand...
Click to collapse
none of those will work, they are for the I900, any of these will work though
Thanks alot bfranklin1986.If i knew this i could have done this in an hour. but i decided to go with the Phiremod Fusion V1.1 and so far it's pretty nice.

[VIDEO] Install ICS Cyanogenmod CM9 Android on the HP Touchpad

And boom goes the dynamite!
reverendkjr said:
And boom goes the dynamite!
Click to expand...
Click to collapse
Thanks rev, great work as always!
I'm really liking this! I know this is going to sound strange, but did we lose the capability to "Reboot" and reboot into recovery and webOS? And Screenshot?
a40dayflud818 said:
I'm really liking this! I know this is going to sound strange, but did we lose the capability to "Reboot" and reboot into recovery and webOS? And Screenshot?
Click to expand...
Click to collapse
It needs to be added into the power menu it's not stock from google like that
a40dayflud818 said:
I'm really liking this! I know this is going to sound strange, but did we lose the capability to "Reboot" and reboot into recovery and webOS? And Screenshot?
Click to expand...
Click to collapse
Screen shot is power and volume up or down, can't remember which one
Sent from my PG06100 using Tapatalk
Thanks again. Couldn't resist upgrading and holy hell was it worth it. Love the cmteam.
Sent from my cm_tenderloin using xda premium
It's funny... I didn't realize that my power menu was different until I read the responses to this thread.
Like I said in IRC: nice work Rev )
These vids are so handy to play on your screen while you update the TP, it gives you a good feeling like: ohhh right and ahhh how did I forget that cmd line etc
good backup, good initiative
I know several people have said the same thing about my videos. Sometimes, it's just nice to see someone else do it first, even though you are more than capable of figuring it out yourself.
reverendkjr said:
I know several people have said the same thing about my videos. Sometimes, it's just nice to see someone else do it first, even though you are more than capable of figuring it out yourself.
Click to expand...
Click to collapse
Thanks for u'r Tut'z.... I started to check u'r YT channel daily for updates... Although I've already seen all your vidz a couple of times... IG v2.0 & CM9 will be playing and guiding me step by step when ever I decide to mod my TP... Maybe this weekend....
I do have a ? regarding Dual Boot and more specifically Triple boot... Which u seem to have been successful with... Your CM9 vid lists WebOS/ICS/CyanogenMod on MoBoot....
Related to the :
CAN I MAKE A TRI-BOOT SYSTEM? (WebOS, CM7, and CM9)
Yes, but don’t bother. There may be instructions forthcoming on this, but it’s a bit advanced - just pick one.
Click to expand...
Click to collapse
over at RootzWiki...
Can I PM u the ? .... Don't want to thread-jack more then I've already....
Posted the ? or ideas on this thread: [Q] Triple boot idea (WebOS,CM7.1,CM9)
Y314K said:
Thanks for u'r Tut'z.... I started to check u'r YT channel daily for updates... Although I've already seen all your vidz a couple of times... IG v2.0 & CM9 will be playing and guiding me step by step when ever I decide to mod my TP... Maybe this weekend....
I do have a ? regarding Dual Boot and more specifically Triple boot... Which u seem to have been successful with... Your CM9 vid lists WebOS/ICS/CyanogenMod on MoBoot....
Related to the : over at RootzWiki...
Can I PM u the ? .... Don't want to thread-jack more then I've already....
Posted the ? or ideas on this thread: [Q] Triple boot idea (WebOS,CM7.1,CM9)
Click to expand...
Click to collapse
I am NOT tri-booting. The ICS that you saw was Evervolv and it was broken. I removed it right after making that video. I will NOT EVER be booting two different versions of Android on the same device.....EVER.
A grateful thank you.
Rev, I would like to thank you for your great tutorials. I watched your cm for dummies several times before I got the nerve up to possibly brick my new TP. Needless to say I didn't! I am running Xron 2.9.1 and plan to flash ICS once its a little more mature. I watched your video on flashing Xron and fixing the prop.build and both helped tremendously. So thank you.
reverendkjr said:
I am NOT tri-booting. The ICS that you saw was Evervolv and it was broken. I removed it right after making that video. I will NOT EVER be booting two different versions of Android on the same device.....EVER.
Click to expand...
Click to collapse
I am awaiting your ICS vs. CM7 review, but since you made the X-Ron video you've seem to have gone to CM7... and now ICS (which that I do understand).
Was the xron before cm 3.5? Just curious, I had avoided the alpha till I found your You-Tube and phtt, so straight forward that I did it and no turning back, plus I now understand more of the root terminology. Dual boot's just a plus.
Soon Root my HTC Ineradicable S HBOOT 1.13.0000, now that I have the basic understanding.
texastutt said:
I am awaiting your ICS vs. CM7 review, but since you made the X-Ron video you've seem to have gone to CM7... and now ICS (which that I do understand).
Was the xron before cm 3.5? Just curious, I had avoided the alpha till I found your You-Tube and phtt, so straight forward that I did it and no turning back, plus I now understand more of the root terminology. Dual boot's just a plus.
Soon Root my HTC Ineradicable S HBOOT 1.13.0000, now that I have the basic understanding.
Click to expand...
Click to collapse
I am working on the comparison video this weekend. I'm hoping to get something up tomorrow. There is just so many things to compare that I'm trying to make it worth watching. Check tomorrow evening for it.
Thanks Rev
Let me add my thanks for the great vids. WebOs was fun, but ICS is the tablet experience I was looking for when I bought the TP.
Just an FYI for those of you who, like me, hadn't installed CM7 in a while and got stuck on the command line screen with a device not found message and couldn't figure out what to do next.
Reboot your touchpad into WebOS. Select device info, reset options, then reset (or maybe it's reboot--can't remember). When the screen goes black, hold the volume up button and the device will reboot into a screen with the USB symbol. Now enter the command
novacom.exe boot mem:// < ACMEInstaller2
in the DOS window on your PC and you should be all set (assuming you have the necessary files in the appropriate directories as described by reverendkjr).
When I installed cm9 I felt that same feeling I had when first installing android. But this time having rev's video was a good feeling to be able to follow all the correct steps. Thanks rev
Newbie here.
And thanks a bunch for this!
I did everything as per the instructions and it worked great.
However i left the device idling and it wouldn't wake up in the morning! I can however see the blinking light on the home button. Any advice?
Like I said, newbie here.
msnarain said:
Newbie here.
And thanks a bunch for this!
I did everything as per the instructions and it worked great.
However i left the device idling and it wouldn't wake up in the morning! I can however see the blinking light on the home button. Any advice?
Like I said, newbie here.
Click to expand...
Click to collapse
Hold the Home+power button for a few seconds it will wake up
Good Job.
Thx

[App] New Camera From The Google Experience Phones

So i took the APK from this thread and made it work for our device. this will only work on AOSP roms that have a CM10.1 base. If you would like to try it, go ahead and flash in recovery. Please have a nandroid just in case, each phone is different and although it works for some it might not work for all.
THIS WILL NOT FIX ANY EXISTING PROBLEMS THAT THE CAMERA HAS, ITS JUST THE NEW UI .
NEW GE 4.2.2 camera Flash in recovery.
OLD CM10.1 camera Flash in recovery.
I will try my best to help anyone out that needs it. feel free to comment here or PM me. :victory:
synisterwolf said:
So i took the APK from this thread and made it work for our device. this will only work on AOSP roms that have a CM10.1 base. If you would like to try it, go ahead and flash in recovery. Please have a nandroid just in case, each phone is different and although it works for some it might not work for all.
THIS WILL NOT FIX ANY EXISTING PROBLEMS THAT THE CAMERA HAS, ITS JUST THE NEW UI .
NEW GE 4.2.2 camera Flash in recovery.
OLD CM10.1 camera Flash in recovery.
I will try my best to help anyone out that needs it. feel free to comment here or PM me. :victory:
Click to expand...
Click to collapse
Works. UI is different. No photosphere or anything, at least for me. It'll do. Thanks!
x2kjosh said:
Works. UI is different. No photosphere or anything, at least for me. It'll do. Thanks!
Click to expand...
Click to collapse
i think i can get photosphere working if you would like to try it. i did it for the rezound before. it requires a 3lib files to turn it on. ^_^
Edit:
going to be a little harder than i thought. i can get it to turn on. but when i move the phone around it FC. Going to have to do a log cat and figure what is what.
Edit2:
Got the full dump, even better to work with.
synisterwolf said:
i think i can get photosphere working if you would like to try it. i did it for the rezound before. it requires a 3lib files to turn it on. ^_^
Edit:
going to be a little harder than i thought. i can get it to turn on. but when i move the phone around it FC. Going to have to do a log cat and figure what is what.
Click to expand...
Click to collapse
I've got faith in ya
synisterwolf said:
i think i can get photosphere working if you would like to try it. i did it for the rezound before. it requires a 3lib files to turn it on. ^_^
Edit:
going to be a little harder than i thought. i can get it to turn on. but when i move the phone around it FC. Going to have to do a log cat and figure what is what.
Edit2:
Got the full dump, even better to work with.
Click to expand...
Click to collapse
I don't know if you saw my other thread asking about the gyroscope, but our phone doesn't have one, so photosphere won't work.
somerandomname1 said:
I don't know if you saw my other thread asking about the gyroscope, but our phone doesn't have one, so photosphere won't work.
Click to expand...
Click to collapse
yeah i kinda of figured as much when the FC was calling for it but i was able to use the tilt sensor to do it. But the phone now crashes when stitching the photos.
im trying to get help on it now but progress has been slow, just moved into a new house and still setting everything up.
so what's the new ui look like - can some post / link a screen shot? is this it....
http://www.droid-life.com/2013/06/27/download-new-stock-camera-app-from-google-play-edition-phones/
after reading the original thread it seems safe to install this as it will not overwrite the stock camera app / gallery. can anyone confirm that on our phone?
thanks for the work to to port this over for our use!!!
synisterwolf said:
yeah i kinda of figured as much when the FC was calling for it but i was able to use the tilt sensor to do it. But the phone now crashes when stitching the photos.
im trying to get help on it now but progress has been slow, just moved into a new house and still setting everything up.
Click to expand...
Click to collapse
I was wondering if that would be possible. If you got that to work, I'd love you forever.
synisterwolf said:
yeah i kinda of figured as much when the FC was calling for it but i was able to use the tilt sensor to do it. But the phone now crashes when stitching the photos.
im trying to get help on it now but progress has been slow, just moved into a new house and still setting everything up.
Click to expand...
Click to collapse
Slow cause you just moved into a new house? That sounds like a lousy excuse to me. Get on it!
Sent from my Samsung Galaxy s3 using xda premium
TheBr0ken said:
Slow cause you just moved into a new house? That sounds like a lousy excuse to me. Get on it!
Sent from my Samsung Galaxy s3 using xda premium
Click to expand...
Click to collapse
You should do a "Lol" or something at the end of your post cause at this point you sound like a pushy obnoxious ass. He don't owe you anything so watch how you post especially when inquiring about ETA's from any Android developer who does this for free, fun and on their own time for the community
sent from recovery

[Q] Specific ROM Help

OK, so I haven't posted much in this forum in general because I haven't had a need to really. I find what I need read and move on. But because of that I can't post in the developer section to ask this question before I flash this ROM so I will ask it here. So I'm going to take the plunge and flash Newts NOS m7 ROM. But after reading about 60% of a 949 page thread I do have some confusion. There were some updates and patches I'm going to call them for a lack of better term. I don't need to run any type of beast mode kernel. So what patches or fixes do I need to add in order for everything to work on this ROM? And I'm choosing this one over the alpha Sense 5 ROM based on data working with Verizon and not working with the alpha. At least nothing has been posted that it's working in all aspects now. I appreciate the help and hope that I can be rocking the NOS rom by tonight before I go to bed.
Really? No help out of 60 views?
Sent from my HTC6435LVW using xda app-developers app
If you install the full rom, you don't need any of the patches.
Well I have the full app plus a couple of the other downloads that are mentioned to have off the bat. But has the ROM download been updated with the patches that fix stuff? Thank you for your response by the way.
CoyotesFan4Evr said:
Well I have the full app plus a couple of the other downloads that are mentioned to have off the bat. But has the ROM download been updated with the patches that fix stuff? Thank you for your response by the way.
Click to expand...
Click to collapse
3.0.7 is the only thing you need to have as of today it contains everything, patches are minor small updates and newtoroot usually will tell you what patch you need when they are released.
Sent from my dlx using XDA Premium HD app
So you are saying that the kernel patch, the call patch, and the other patch are all included in the 3.0.7 build and I shouldn't worry about them even though people are having issues with the ROM in certain areas such as what the patches fix? I'm asking for clarification because I can't afford to screw up my one and only phone. Besides Viper Rom this Nos 7 Rom seems to be the best out there for what I want until the update comes out. This is me being cautious and doing my research. I don't want to sound like a jerk. Just trying to have everything lined up right.
CoyotesFan4Evr said:
So you are saying that the kernel patch, the call patch, and the other patch are all included in the 3.0.7 build and I shouldn't worry about them even though people are having issues with the ROM in certain areas such as what the patches fix? I'm asking for clarification because I can't afford to screw up my one and only phone. Besides Viper Rom this Nos 7 Rom seems to be the best out there for what I want until the update comes out. This is me being cautious and doing my research. I don't want to sound like a jerk. Just trying to have everything lined up right.
Click to expand...
Click to collapse
Again.... just install the full rom. All is included.. Don't see how you could be confused with that statement.
CoyotesFan4Evr said:
So you are saying that the kernel patch, the call patch, and the other patch are all included in the 3.0.7 build and I shouldn't worry about them even though people are having issues with the ROM in certain areas such as what the patches fix? I'm asking for clarification because I can't afford to screw up my one and only phone. Besides Viper Rom this Nos 7 Rom seems to be the best out there for what I want until the update comes out. This is me being cautious and doing my research. I don't want to sound like a jerk. Just trying to have everything lined up right.
Click to expand...
Click to collapse
All you really need to worry about if it says full Rom or not. If it is a full Rom flash it after that there is nothing else to do.
Sent from my dlx using XDA Premium HD app
Thanks for the help. I should just take the plunge but like I said before I'm just trying to do all the research that I need and to be as well read on it before I just jump into something. I'm not a first time rooter or flasher of ROM's. This one just has me timid because even the latest posts in the thread of the ROM is saying there are data issues. So I hope you can see where my concern is coming from. I'll flash it tomorrow and see what happens from there though.
OK, so I just took the plunge and did the flash. One problem I have right off the bat is that Gmail keeps closing and failing. I can't have that because all of my most important e-mails come in thru that. So is there a fix or do I just have to go back to stock?
CoyotesFan4Evr said:
OK, so I just took the plunge and did the flash. One problem I have right off the bat is that Gmail keeps closing and failing. I can't have that because all of my most important e-mails come in thru that. So is there a fix or do I just have to go back to stock?
Click to expand...
Click to collapse
Never heard of that issue. I would just re-wipe and re-install the rom.
CoyotesFan4Evr said:
OK, so I just took the plunge and did the flash. One problem I have right off the bat is that Gmail keeps closing and failing. I can't have that because all of my most important e-mails come in thru that. So is there a fix or do I just have to go back to stock?
Click to expand...
Click to collapse
Did you even wipe data or did you just install the rom and hope that you wouldn't have to do anything about your already installed apps?
Seriously??!! Oh just install the ROM it's totally fine. Yeah well it's not fine. GMAIL is broke and I HAVE TO HAVE IT WORK!! Come on people help me out!!
CoyotesFan4Evr said:
Seriously??!! Oh just install the ROM it's totally fine. Yeah well it's not fine. GMAIL is broke and I HAVE TO HAVE IT WORK!! Come on people help me out!!
Click to expand...
Click to collapse
You won't get any help if you don't tell us what you did..... I have never heard of ANY rom that gmail doesn't work.
and YELLING AT PEOPLE DOESN'T HELP EITHER.
Well, it wasn't meant to come out as yelling. And I didn't do anything but install the ROM just like everyone kept telling me to do. Oh and the weather on the lock screen is broke too. It always says no weather data available.
Well nothing like feeling even more of an ass. I never saw the replies I had already gotten from you guys. I guess my page wouldn't refresh. I'll wipe it and re flash it on I guess. I did all the stuff I needed to do before flashing it so I"m in the clear on that one. I'm not sure as to what all the extra apps that I've never seen before are but I'm ok with that for now. Oh, um isn't there suppose to be a swipe screen to wake feature on this ROM? I can't find it.
So G-mail is back to working now. I reflashed the ROM and did a cache and dalvik cache wipe. I also did the lock screen patch and volume to wake patch. I still don't have weather on the lock screen though. And the little click sounds that are turned on for me for when I unlock or lock the screen....yeah I can't hear them.
So, everything works now. Go figure....well minus those sounds that for some reason I actually really really liked having turned on before I flashed this. Maybe they will just start working again too.
CoyotesFan4Evr said:
So, everything works now. Go figure....well minus those sounds that for some reason I actually really really liked having turned on before I flashed this. Maybe they will just start working again too.
Click to expand...
Click to collapse
So, in other words, all of your problems were self inflicted.
Do the flashing process properly next time and you won't have these issues.
Nope not self inflicted. I did the flash exactly the way I was suppose to. Not sure why flashing it a second time worked but it did. Now to figure out how my nanddroid back up got deleted.....or if it's just hidden and I don't know where it is. I use TWRP recovery by the way.

Categories

Resources