Hello. It all started when i rooted my phone with SuperOneClick v2.1.
After that i installed LCD Density
After i changed the default density , the phone rebooted and kept vibrating on a black screen.
Now i am trying to flash it with the i5500XFJPQ via Odin, but i can't find PHONE and PDA files in the archive, also CSC and BOOT were not .tar or .md5, but .img files
Get fresh firmware for your device and your reigon from samifirmware i think and reflash with latest firmware it should be an all in one package
Sent from my GT-I5500 using XDA App
It is not bricked. Flash CWM, when you are in it,scroll down , tap factory reset (it will erase the system file ti its original state). Done
Sent from my blek krupuk
Related
Hi there!
I might need some help. After it froze 3 times because of instagram, i pulled libsurfaceflinger.so from system/lib because that caused problems to instagram. (it was used for crt off btw)
So after that, i restarted the phone, but it won't go past the S2 screen, not even boot animation. However booting to download mode or recovery works. I can't wipe because of the LQ5. I tried to reflash the bootloader, but can't seem to help.
Any idea? i don't really wan't to do a reflash with 3 a files firmware, that's just the worst case scenario...
thx
...
MistahBungle said:
Flash a stock rom in Odin. Single file packages available here or with the PC version of Checkfus - search for it on here/Google; this will enable you to download the latest firmware for your phone model/country/carrier (there are also unbranded firmwares) that you'd normally get via OTA update.
I don't see how you have any other choice.
Click to expand...
Click to collapse
LQ5 has the brickbug... so I don't know if it's safe to flash a single file firmware over it... because if you wipe LQ5, it might brick the phone...
flashed single file LPO over it, and it seems to have solved the problem, the phone booted up
Everything that happened:
1) I rooted my GT-I9300 using ODIN v3.07 and CWM Recovery
2)I installed zip of Resurrection Remix Kitkat ROM for S3 using CWM
3) I hated it to the core!
4)I flashed the official stock ROM of 4.3 JB using ODIN
5) I realized that USB Debugging was off!
6) My phone gets stuck at the Samsung logo and doesn't even load into recovery mode!
7) It boots into download mode, I flash the 4.1.2 JB ROM for S3 using ODIN
8)The Samsung logo appears, disappears and then again appears! This goes on forever!!
9)This time it boots into Android Recovery and displays the error: E: failed to mount data (Invalid Argument) cant find /data
10) The phone restarts and continues the boot-looping!!
11) I try to restore it with Kies3 using Firmware Upgrade and Initialization
12) It upgrades the firmware to 4.3 JB but the things that happened in NO. 6 continue!
13) I realised its time for the xda people to help me out!!
Things I have:
1) My Bricked Samsung Galaxy S III (International) GT-I9300
2) USB Cable
3) A Windows 7 PC with 2GB RAM
4) An Internet Connection
Can someone please explain what has happened to my phone and what should I do to get it back on stock ROM?
Please help me as I dont want to buy a new phone!
Note: If you have 16 GB of I9300, apply this guide
I think you can restore your device via repartition with a PIT file. I uploaded Odin and PIT file that I use. You can download it from attachments
You should install this ROM via PIT file; http://samsung-updates.com/details/25147/Galaxy_S_3_International/GT-I9300/TUR/I9300XXUGNB6.html
Make sure select PIT file in Odin before installation.
I live in India. Can you suggest an INU or INS rom?
I flashed my phone with PIT file and (INS_I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1) 4.3 JB ROM. No Progress!!
stance_john said:
I flashed my phone with PIT file and (INS_I9300XWUGML4_I9300ODDGML4_I9300DDUGMK1) 4.3 JB ROM. No Progress!!
Click to expand...
Click to collapse
Can you try install with my suggested ROM? If it will success, you can install your country's ROM anyway.
After installing it via PIT file, wait for boot. If it stuck in Samsung logo, remove battery,insert the battery again, boot into recovery and try to wipe data.
I'm saying again; Make sure select PIT file in Odin before installation.
Did you try a wipe data when you flashed second stock ROM?? When you got in recovery
Sent from my GT-I9300 using Tapatalk
f0xy said:
Did you try a wipe data when you flashed second stock ROM?? When you got in recovery
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Yes, I tried it. When i tried clear dalvik cache, it wasnt cleared. Instead I was took to the main menu of the CWM.
forumber2 said:
Can you try install with my suggested ROM? If it will success, you can install your country's ROM anyway.
After installing it via PIT file, wait for boot. If it stuck in Samsung logo, remove battery,insert the battery again, boot into recovery and try to wipe data.
I'm saying again; Make sure select PIT file in Odin before installation.
Click to expand...
Click to collapse
I installed the ROM with the PIT file but still no progress!
A new problem:
1) I went to the Samsung people expecting some help
2) And they did the most cruel thing on this earth!!! They said
"The binary counter says 4. That means you have flashed the ROM customly. This has void the warranty of your device. We cant help you if you have void your warranty. Sorry!"
I tried rooting my S2 using ODIN but stupidly forgot to load the ROM file into odin and only loaded the .PIT file.
Now it wont turn on, neither go into download or recovery mode......Is it f**ked?
Yes. Replace motherboard.
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
obaidr said:
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
Click to expand...
Click to collapse
Did you unzip the download
obaidr said:
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
Click to expand...
Click to collapse
i also have the same problem with 920x (the demo version) i did the same wey
Yes of course. Everything is fine and it does the first steps but it fails at writing the nand. Does anyone have a PIT file? Maybe that way it can be fixed. I think the pit is wrong and Odin addresses a wrong area of the nand memory.
Sent from my Optimus G using XDA Free mobile app
Damn, i have the same issue, after flashing the TWRP recovery image with Flashify, my phone is stuck at the splash screen "Samsung Galaxy S6 Edge", i tried to flash the root file with the stock recovery (the 920f one), and my phone doesn't boot... So i also tried to flash a stock firmware through Odin and i have the nand fail error ! Hope that we'll have a solution quickly.
Maybe there is a way to read the nand structure of 920x. That might help solving the problem.
Sent from my Optimus G using XDA Free mobile app
Problem solved but i have a 925f not a 920x :/
It's the demo version for the Edge or for the normal S6 ?
You need to flash the right firmware for the right version through Odin.
do you guys tried odin the stock recovery 1st?
Where can I find the stock recovery?
Sent from my Optimus G using XDA Free mobile app
Ok for what its worth it:
the follwoing files can write the nand:
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5
twrp-2.8.6.0-zerofltespr.img.tar
But the phone doesnt go into recovery, eventhough the setup processes is successful.
The following files however, can not write to nand and fail:
G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar.md5
G920F-XXU1AOD9-BOOTLOADER.tar.md5
Maybe it helps a little.
But the phone cannot boot anything but the download mode.
obaidr said:
Ok for what its worth it:
the follwoing files can write the nand:
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5
twrp-2.8.6.0-zerofltespr.img.tar
But the phone doesnt go into recovery, eventhough the setup processes is successful.
The following files however, can not write to nand and fail:
G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar.md5
G920F-XXU1AOD9-BOOTLOADER.tar.md5
Maybe it helps a little.
But the phone cannot boot anything but the download mode.
Click to expand...
Click to collapse
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 ---> International Version
twrp-2.8.6.0-zerofltespr.img.tar ----> TWRP for Sprint S6
now does those files compatible with your phone? I know u said you have galaxy the 920x (the demo version) but I really can't tell you does those files work with your phone or not, may be not that's why your phone is soft brick right now.
Maybe but the first file I flashed and which made the phone stuck at the logo was the root file. I tried the other files to solve the problems. But still usually it should let me flash a original file from Samsung servers but it doesn't. Nand write error.
Sent from my Optimus G using XDA Free mobile app
same problem
Kev Lav said:
Damn, i have the same issue, after flashing the TWRP recovery image with Flashify, my phone is stuck at the splash screen "Samsung Galaxy S6 Edge", i tried to flash the root file with the stock recovery (the 920f one), and my phone doesn't boot... So i also tried to flash a stock firmware through Odin and i have the nand fail error ! Hope that we'll have a solution quickly.
Click to expand...
Click to collapse
have you solved it ...?? facing same problem
I have the same with my G925F, used the howto-flash-g92xf-and my phone doesn't boot only the splash screen
download kies 3 and then plug your device in, go to tools at the top and then firmware upgrade and initialisation, enter sm-g925f in the model number and then when it asks for your serial number then enter it from the back of the phone. (its in really faint writing) then follow the onscreen instructions
sometimes people have select reactivation lock in Samsung account and that block flash
http://forum.xda-developers.com/showthread.php?p=61576005
Have the same problem dont know what to do, anyone can solve the problem. I flash the root file with odin it give me an error, then a screen of warning to start the phone with smart switch, try to flash stock fw, and Im here blocked, please help, thanks.
You can try this guys, It worked for me, but the "secret codes" on phone app won't work (doesnt for me). If anyone find a way to solve this, it would be great!!!
http://forum.xda-developers.com/showpost.php?p=63668700&postcount=31
Hi I have one samsung Galaxy S3 which is stuck on Boot Screen. I tried to flash it but odin shows fail. I tried pit file same. Is there any way to fix it. I have Z3X also with me
@arjun_anil, in the worst case your internal memory is gone. So before threwing away, try firmware again: download your firmware, drivers, Odin from sammobile.com and follow exactly instructions, given there. If Odin finishs with failed again, post the log.
I tried to flash efs file and this is what I got
This is what I got from odin flashing efs file
Boot screen huh? Sounds like is missing/corrupted is files. Have you tried recovery an factory wipe? Also if you can connect to Odin, then you could reflash. But first your gunna need to know a few things about this brick here. Like the android version, carrier, an kernel version. So you can download an flash the proper files. I'm guessing your on a Verizon phone and or you didn't install Samsung drivers to help Odin's successful flashing chances. If you don't know your phones info, you can find out in recovery an Odin modes on the phone if accessible.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app