Related
Hi, I'm running a stock P500 and I'm a bit disappointed with its performance. I'm looking for a ROM which is feature-complete, i.e. no missing features such as Bluetooth calling, etc. and minimal to no deviation from the stock Android UI. Any suggestions?
use megatron ROM it is the closest in my opinion and has very good performance but i would suggest trying the other ROMs that have gingerbread like miks cm7 they are not missing much and what they are missing you can get back
dislplin01 said:
use megatron ROM it is the closest in my opinion and has very good performance but i would suggest trying the other ROMs that have gingerbread like miks cm7 they are not missing much and what they are missing you can get back
Click to expand...
Click to collapse
I just visited the Megatron ROM thread http://forum.xda-developers.com/showthread.php?t=870640. Why is noejn suggesting that people use void instead?
two roms.
OpenOptimus by Ciaox
OR
Nessy Rom
If you want a nice and long battery life
flash Franco kernel
take note* For 2.2 flash with CFS
Do as what you are told on their page.. I or the dev will not be responsilble.
Ok, so this is all kinda new to me so I wanted to make sure that I have the basics covered:
1. I need to root my phone. I'm running Android 2.2.2 so I guess that means I need to use gingerbreak. It's an .apk file that I need to install on my phone and then I run it to gain root access. Are there any command line actions needed for gingerbreak?
2. After rooting, I need to install a ROM manager such as CWM or AmonRA. If I'm not mistaken, the program itself will install the custom recovery, right? And how do I boot into that recovery mode?
3. After booting into recovery mode, I need to do a nandroid (?) backup of my current ROM, right? And the backup of my stock ROM is restored through the same custom recovery, yes? Would restoring the stock ROM unroot my phone and remove the custom recovery as well?
3. After backing up, I need to flash the custom ROM which should be saved as a .zip file on my SD card. Do I need to worry about the kernel as well?
Sorry if I have a lot of questions.
DigitalAnalog said:
Ok, so this is all kinda new to me so I wanted to make sure that I have the basics covered:
1. I need to root my phone. I'm running Android 2.2.2 so I guess that means I need to use gingerbreak. It's an .apk file that I need to install on my phone and then I run it to gain root access. Are there any command line actions needed for gingerbreak?
2. After rooting, I need to install a ROM manager such as CWM or AmonRA. If I'm not mistaken, the program itself will install the custom recovery, right? And how do I boot into that recovery mode?
3. After booting into recovery mode, I need to do a nandroid (?) backup of my current ROM, right? And the backup of my stock ROM is restored through the same custom recovery, yes? Would restoring the stock ROM unroot my phone and remove the custom recovery as well?
3. After backing up, I need to flash the custom ROM which should be saved as a .zip file on my SD card. Do I need to worry about the kernel as well?
Sorry if I have a lot of questions.
Click to expand...
Click to collapse
1. Install it, open it and select "Root"
2. No, the root program won't install the recovery. You need to do that; the easiest way is by Rom Manager (download from market); boot in recovery: turn off the phone and start it by pressing at the same time: home + vol down + power key and release at lg logo to enter custom recovery or just select boot into recovery from ROM Manager
3. Yes, make a backup and to restore it just select "restore" from the same place. No, you will restore the backup you just made so your phone will be exactly the way it was when you created the backup (including apps, settings etc)
4. Yes, you will enter "install zip from sdcard -> choose zip". Don't forget to wipe cache, dalvik cache, data/factory reset and format /system before you flash the rom. Other kernels are not mandatory but highly recommended (the differences are big) - also wipe just cache & dalvik cache before flashing the kernel
22VIN said:
1. Install it, open it and select "Root"
2. No, the root program won't install the recovery. You need to do that; the easiest way is by Rom Manager (download from market); boot in recovery: turn off the phone and start it by pressing at the same time: home + vol down + power key and release at lg logo to enter custom recovery or just select boot into recovery from ROM Manager
3. Yes, make a backup and to restore it just select "restore" from the same place. No, you will restore the backup you just made so your phone will be exactly the way it was when you created the backup (including apps, settings etc)
4. Yes, you will enter "install zip from sdcard -> choose zip". Don't forget to wipe cache, dalvik cache, data/factory reset and format /system before you flash the rom. Other kernels are not mandatory but highly recommended (the differences are big) - also wipe just cache & dalvik cache before flashing the kernel
Click to expand...
Click to collapse
Thank you. What are the precautions that I need to take to make sure I don't brick my phone? Also, what are the chances of my phone getting damaged and at which point during those steps is it most likely to happen?
DigitalAnalog said:
Thank you. What are the precautions that I need to take to make sure I don't brick my phone? Also, what are the chances of my phone getting damaged and at which point during those steps is it most likely to happen?
Click to expand...
Click to collapse
The chaces of bricking the phone are very small.
What can happen:
- some people reported that their phone got bricked when they installed the recovery with ROM Manager (this can be easily undone, there is a thread about this). Never happened to me, everything went smooth & fast. There are other ways to install a recovery if you don't want to use ROM Manager, just check the Development section.
- the ROM you choose can be uncompatible with your recovery (all the new roms are compatible with clockworkmod recovery (this is the recovery you will install via ROM Manager); there are some older roms which are compatible only with AmonRA)
- after flashing a custom kernel the phone might not boot (no panic, just flash the rom again or restore backup); check if your ROM is compatible with the kernel you choose
Flashing with recovery is very safe because everything can be easily undone. As long as the phone boots into recovery there is no panic.
But most of the time if your cautious and do everything as told your fine~~
hahaha.. Enjoy..
Rom manager give Cwm.. So no hassle..
22VIN said:
The chaces of bricking the phone are very small.
What can happen:
- some people reported that their phone got bricked when they installed the recovery with ROM Manager (this can be easily undone, there is a thread about this). Never happened to me, everything went smooth & fast. There are other ways to install a recovery if you don't want to use ROM Manager, just check the Development section.
- the ROM you choose can be uncompatible with your recovery (all the new roms are compatible with clockworkmod recovery (this is the recovery you will install via ROM Manager); there are some older roms which are compatible only with AmonRA)
- after flashing a custom kernel the phone might not boot (no panic, just flash the rom again or restore backup); check if your ROM is compatible with the kernel you choose
Flashing with recovery is very safe because everything can be easily undone. As long as the phone boots into recovery there is no panic.
Click to expand...
Click to collapse
Thank you. When I backup my stock ROM, the output is a .zip file which is no different from how the custom ROM zips are packaged, right? Also, would you know if Gingerbreak supports unrooting? I appreciate all of your help and I'm quite excited to root my Optimus One.
DigitalAnalog said:
Thank you. When I backup my stock ROM, the output is a .zip file which is no different from how the custom ROM zips are packaged, right? Also, would you know if Gingerbreak supports unrooting? I appreciate all of your help and I'm quite excited to root my Optimus One.
Click to expand...
Click to collapse
Your backup will appear as a folder on the root of your sdcard (/clockworkmod/folder with the date of your backup). You need to save that folder on your pc just to be safe.
Yes, gingerbread supports unrooting
No problem Just have fun )
22VIN said:
Your backup will appear as a folder on the root of your sdcard (/clockworkmod/folder with the date of your backup). You need to save that folder on your pc just to be safe.
Yes, gingerbread supports unrooting
No problem Just have fun )
Click to expand...
Click to collapse
Thanks! Is it safe to do all the flashing/work from within ROM Manager? It just seems too easy to be true.
Also, is there a 'compatibility matrix' of some sort for the different ROMS and kernels available? Since I want GB, I'm planning on flashing Mik's CM7 mod. Is Franco's kernel compatible with that?
DigitalAnalog said:
Thanks! Is it safe to do all the flashing/work from within ROM Manager? It just seems too easy to be true.
Also, is there a 'compatibility matrix' of some sort for the different ROMS and kernels available? Since I want GB, I'm planning on flashing Mik's CM7 mod. Is Franco's kernel compatible with that?
Click to expand...
Click to collapse
I say it's pretty safe. As I said, worked like a charm for me.
mik_os's rom is flashable via clockworkmod recovery and compatible with franco.kernel (bfs version).
If you are interested in a froyo stock rom with just the root and a performant kernel like franco's one, I could cook a rom for you...
22VIN said:
I say it's pretty safe. As I said, worked like a charm for me.
mik_os's rom is flashable via clockworkmod recovery and compatible with franco.kernel (bfs version).
Click to expand...
Click to collapse
But now rom manager doesn't let us download any Rom(Only for premium) anymore except for Gapps.
download at the Dev page at XDA is the best. cause it shows all the steps required
22VIN said:
I say it's pretty safe. As I said, worked like a charm for me.
mik_os's rom is flashable via clockworkmod recovery and compatible with franco.kernel (bfs version).
Click to expand...
Click to collapse
Thanks. I was able to gain root as well as install CWM. I'm currently backing up my current ROM. Now I'm not sure if this is a stupid question but when I install a custom ROM, wouldn't that overwrite CWM? How do I go back to recovery then, say, to reflash my original ROM?
Flashing a rom through recovery does not overwrite the recovery.
And you can always boot into recovery by pressing and holding home+volume down+power when the phone is off till the recovery menu boots.
Sent from my LG-P500 using XDA App
I'm just about to flash my first custom ROM. It's all quite clear up to this point. I'm not so sure about the kernel though. Is it all done via the Recovery console? Which options/commands should I take? And what about the ZRAM initializer?
DigitalAnalog said:
I'm just about to flash my first custom ROM. It's all quite clear up to this point. I'm not so sure about the kernel though. Is it all done via the Recovery console? Which options/commands should I take? And what about the ZRAM initializer?
Click to expand...
Click to collapse
For flashing rom : wipe everything, partition SD card only of you want to use a2sd or data2sd (check ciaox's REPO thread for more info about these two) and then choose flash from zip. If you are wiping battery stats then do it when you are fully charged.
For flashing kernel : wipe cache,dalvik cache and battery stats. No need to partition SD card.
EDIT: yes you need to flash zram initialiser. Keep in mind to flash Cfs version for froyo and bfs version for gb roms. Also always reboot between multiple flashes.
Sent from my LG-P500 using XDA App
mihir287 said:
For flashing rom : wipe everything, partition SD card only of you want to use a2sd or data2sd (check ciaox's REPO thread for more info about these two) and then choose flash from zip. If you are wiping battery stats then do it when you are fully charged.
For flashing kernel : wipe cache,dalvik cache and battery stats. No need to partition SD card.
EDIT: yes you need to flash zram initialiser. Keep in mind to flash Cfs version for froyo and bfs version for gb roms. Also always reboot between multiple flashes.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Just go to the zip rom. example franco.kernel.v17. click on it. and choose rom manager if prompt and just wipe dalvik cache..
WIPE BATT STAT ONLY WHEN YOU CHARGED AT 100%
Zram is actually up to individual.
just reminding him. Hope im not a pest to you.
Hello!
Currently I'm running miniCM7 on my x10 mini pro and I want to re-stock it and install this rom http://forum.xda-developers.com/showthread.php?t=1206625. So My question is- how to get back to stock kernel, stock 2.1 and then install xrecovery and then rom that I mentioned above?
SEUS or flastool
U just need to flash stock kernel with flash tool or seus .
rzepa90 said:
Hello!
Currently I'm running miniCM7 on my x10 mini pro and I want to re-stock it and install this rom http://forum.xda-developers.com/showthread.php?t=1206625. So My question is- how to get back to stock kernel, stock 2.1 and then install xrecovery and then rom that I mentioned above?
Click to expand...
Click to collapse
Do you first want to go back to stock/standard rom? Or just switch to Clean?
If you want to go back, i hope you made a backup, that makes things easier
If you just want to switch to a new rom, just do it the same way as you flashed CM7. Boot into CWM/xRecovery, choose zip, flash, factoryreset and wipe.
it's not just need the PC companion?.
I have a question. I want to restock my rom from the last backup I made from xRecovery, but im now with CWMRecovery, how can I boot into old xRecovery?
with cwm you have the option to restore using xrecovery backups
demoniacs said:
with cwm you have the option to restore using xrecovery backups
Click to expand...
Click to collapse
tcntad just say that, but thanks. Im to lazy to find a tutorial and just use PC Companion to go back to stock.
I want to install cm7
Now I'am in cm6
So I need to go back to 2.1
I have a xrecovery backup of my 2.1 rom
Can I restore it via cwm
And do I need to do factory reset before restoring to 2.1
Please help
Why u want to go back? Why don't u just install it straight away? I think u can just install it without need to turn back to stock 2.1.
<----------------------
So can I just unlock bootloader, flash kernal and straitaway flash minicm7
Sent from my X10mini using Tapatalk
Yes. Of Coz, im changing around all of those ROM without need to Flash our stock kernel n firmware. But u need to read about installation guide on which ROM u want to install. Make sure u used the right Kernel with the right ROM to avoid Mal function on your device. Is this help?
<---------------------------- i will be glad..
Can you please give me steps on how to install cm7
Now Iam in cm6
Which kernal should I flash
Please explain
Sent from my X10mini using XDA
Actually u can find it at the Thread from where's the ROM u downloaded.
Which CM7 u want to use? MiniCM7 ?
Okay, since u already used a custom ROM (thats mean u a rooted)
If in that thread said u need to used their custom kernel, so that mean u need to download n flash that kernel.
Your downloaded ROM should be place in your root of your sdcard. i cant be in a folder.
boot your device in recovery mod.
Usually, they told to do a full wipe(factory reset) clear dalvik catch etc.. then
after u done with that, u can now install your ROM.. after all that finish, just reboot your phone. it will take a time to reboot for the 1st time. Is this help?
<---------------------------- i will be glad..
I've just rooted my phone using this method:
http://forum.xda-developers.com/showthread.php?t=1501719
To install ROM's (and in particular Cyanogen 7), I need Clockwork Recovery installed..yes?
I can't seem to find the obvious way to do this, but, can I simply use stock recovery, to run the CWM.zip in the above method to get to Clockwork Recovery - and then install Cyanogenmod?
white43 said:
I've just rooted my phone using this method:
http://forum.xda-developers.com/showthread.php?t=1501719
To install ROM's (and in particular Cyanogen 7), I need Clockwork Recovery installed..yes?
I can't seem to find the obvious way to do this, but, can I simply use stock recovery, to run the CWM.zip in the above method to get to Clockwork Recovery - and then install Cyanogenmod?
Click to expand...
Click to collapse
Chech here
http://forum.xda-developers.com/showthread.php?t=1103399
The bedt way to hsve ur cellphone root
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
Simple method root and cwm all in one .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Hmmm, nobody actually really answered my query there.
The phone is already rooted.
In the method I followed, you used stock recovery, to load Clockwork Recovery. I'm simply asking, can I use this method to install custom rom?
white43 said:
Hmmm, nobody actually really answered my query there.
The phone is already rooted.
In the method I followed, you used stock recovery, to load Clockwork Recovery. I'm simply asking, can I use this method to install custom rom?
Click to expand...
Click to collapse
If ur phone said that is root and u have cwm yes u can install custom tom. Do u can go into recovery ?
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
You boot into stock recovery. You then select a file called CWM.zip and this temporarily loads Clockwork. On a reboot, you'd still have stock recovery.
Yes you can flash custom ROM using that temp cwm, I do it all the time
white43 said:
You boot into stock recovery. You then select a file called CWM.zip and this temporarily loads Clockwork. On a reboot, you'd still have stock recovery.
Click to expand...
Click to collapse
I didn't try in that way. If u want give it a try i prefer the way that a post u before
Using XDA Premium over Resurrection Remix ICS, the Best Rom ever made
1) place your ROM zip to SD card root, again flash CWM zip from stock recovery,
and install zip from SDcard,
2) or you flash CF-root CWM version from CWM after flashing CWM zip, to get pemenent CWM
3) flash CF-root TAR file from ODIN to get CWM, no matter you already rooted
Excellent. Thanks guys.
Is there any CWM.zip for the galaxy s3 ??
I want to keep my stock recovery and use CWM abilities like backup
Can any one find a similar thing ??:fingers-crossed:
I mean that I want it to be like my galaxy mini GT-S5570I
I had a CWM recovery . zip
If I want to use it I go to my stock recovery and select " install update from sdcard" and choose the CWM recovery . That make me boot into CWM recovery mod
yousefageaz said:
I mean that I want it to be like my galaxy mini GT-S5570I
I had a CWM recovery . zip
If I want to use it I go to my stock recovery and select " install update from sdcard" and choose the CWM recovery . That make me boot into CWM recovery mod
Click to expand...
Click to collapse
Stock recovery DOES NOT include flashing through zips so even if you in fact can flash stock recovery through CWM you CAN NOT flash CWM through stock one.
And to be honest I can't see any reason why you'd like to do so.
yousefageaz said:
Is there any CWM.zip for the galaxy s3 ??
I want to keep my stock recovery and use CWM abilities like backup
Can any one find a similar thing ??:fingers-crossed:
Click to expand...
Click to collapse
i don't think that is possible! how could you enter a custom recovery through a stock ones?!
Its called fake flash and was invented by koushik Dutta and Paul O'Brien. I used it on my HTC desire for a while. You essentially flashed it into memory and was gone on a reboot. This method is pretty old hat now. Im not convinced anyone uses this anymore. It's certainly not available on the S3.
Actually earlier rooting methods of desire gave you a leaked engineering version of the recovery that had no signature verification. That's the only reason it was possible
Sent from my GT-I9300 using Tapatalk 4
you could try something similiar, for example mobile odin, there you can flash update.zips and keep your stock recovery. (but it has no other cwm abilities)
or you use syah or googy-max kernel, where you can boot from stweaks into 2nd rom utilities which is a full working cwm and disappeares after reboot. there you can keep as well your stock recovery (but you have to flash a custom kernel )
Can mskip's toolbox do backups?
rootSU said:
Can mskip's toolbox do backups?
Click to expand...
Click to collapse
Yes, full nandroid including efs, but needs a rooted phone -and it can provide root.
boomboomer said:
Yes, full nandroid including efs, but needs a rooted phone -and it can provide root.
Click to expand...
Click to collapse
Thanks. I guess that is the OP's solution then!
maybe anpother suggestion, which i often use could be the app online nandroid backup (its on the market), which can perform nandroid backups whithout going into recovery.
So there is no need of a custom recovery as long as you do not want to restore your backup.
and in combination with mobile odin you can flash update.zips. so the basic cwm abilities are covered (as long you have root)