[Q] phone stuck on SE logo after install custom rom - Sony Ericsson XPERIA X10 Mini

i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!

pshay8 said:
i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!
Click to expand...
Click to collapse
no vibrate when turn it on??
no green led while get into flash mode??
It we call hardbrick...
find any workshop with JTAG cable
if u can see SE white logo..
that mean u can try SE PCC first..

vibrate yes
green led yes
and he stuck in this white logo
do you mean pc companion? tryd it also. not working

Do you have Xrecoivery or CWM installed? If yes, you have to mount the SD card for Pc companion recognizes your phone..!

icerebro said:
Do you have Xrecoivery or CWM installed? If yes, you have to mount the SD card for Pc companion recognizes your phone..!
Click to expand...
Click to collapse
yeah, i'm also stuck in this process~~~who can help us!!!!!!! I cannot go through the PCC cos it kept asking me to mount the sd card~but I cannot log into the phone system...

No bro, he meant to use CWM or Xrecovery and use it to mount usb. there is an option if you enter mounts and storage --> mount USB storage in cwm. i am not sure about xrecovery
Please please, dont panic, if you get tension then you wont concentrate on the matter you are doing. Relax!

Tommylee567 said:
No bro, he meant to use CWM or Xrecovery and use it to mount usb. there is an option if you enter mounts and storage --> mount USB storage in cwm. i am not sure about xrecovery
Please please, dont panic, if you get tension then you wont concentrate on the matter you are doing. Relax!
Click to expand...
Click to collapse
cheers mate! just figured out how to use FlashTool to solve the problem~ now my lil mini is back to normal~~
was following these instruction: http://forum.xda-developers.com/showpost.php?p=17674938&postcount=3360

help plszz
nelikp said:
no vibrate when turn it on??
no green led while get into flash mode??
It we call hardbrick...
find any workshop with JTAG cable
if u can see SE white logo..
that mean u can try SE PCC first..
Click to expand...
Click to collapse
hey frnd the same problem is wid me i installed Shin Engine™ Feat Rieska Nico Robin dis rom and now i bricked my my phn i guess no exrecovery working nothing working when i start my phone it justs vibrate and stucks on logo of SE even phn is not getting charged and no led lights i didnt flashed the kernel which was required for using dis rom plszz help me some one plsz....

pshay8 said:
i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!
Click to expand...
Click to collapse
i think this
http://forum.xda-developers.com/showthread.php?t=749438

Soft Bricked ma se w8
plsz can any one help me how to solve this problem plsz

Hi guys, 1st u should try to clean everything, like wipe all things. then try to reboot. If u cant make it work, try to flash other ROM. if u it is still the same, the last thing u can do is, repair it using pc companion. u will get the fresh stock firmware from S.E.
p/s But make sure u read all the installation guide if u want to install custom ROM or flash a custom Kernel.

I think in case when you are stuck with the sony logo there s no need to turn on usb debugging options coz i just did get stuck like that. connected it in flash mode { the green light} and then flashed a global ftf and it worked...

I think the problem when you get stuck in the logo is because the rom was not installed correctly, happened to me once and just doing the download again and installing the rom without flashing the kernel solved the problem

HELP! after installing viper rom to my xperia ray i got stuck on sony logo =/

Related

URGENT: x10 doesn't work anymore

I am sorry to disturb you but I have a big problem with my x10.
I explain: I was on xRecovery and inconveniently clicked on " system format" I had not realized it at the beginning, so then I clicked on "reboot" then my x10 does not work, it stays on the "Sony Ericsson" screen at boot.. and I can't have any access to xRecovery with the back button.
I do not know what I can do for fix my error...
Please help me
ps: I use the last froyo beta 2 of zdzihu
Reflash with seus.
THANK YOU SO MUCH!!!!!!!
You save my phone =)
I have a same problem.
I turn out battery and wait one min,than turn back (phone is off yet)
Then put cable in PC
than press the back button and turn the usb to phone.
Keep pressed back button and sonyericcson logo is appeir. (lamp is green)
If I go to keep the back button when SE logo show, than show battery icon to charge on the screen (lamp is orange)
If I stop to hold the back button when SE logo show, then moving into classical ignition and stop asking me the network key sim ...
I done know what is a network sim...
I note that my phone worked just fine on version 1.6 and am no network key is not looking ... All this happened when it decreased the Nordic flash 2.1 ..
When I try the SEUS to do a restore says it is not possible to throw an error ...
The mods x10i
Firmware - 2.1 update1
Baseband - 2.0.46
Kernerl 2.6.29 SEMCUser @ SEMCHost # 1
Build 2.0.A.0.504
Can I go back to version 1.6 or put some other firmware, if we will be doing.
Now I use phone only on mp3
heeeeeeeeeeeeeeeeeeeeeelp
XperiaX10iUser said:
Reflash with seus.
Click to expand...
Click to collapse
itdoesn't work for me plz help
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
I had the same problem with xRecovery.
before I put the beta 2, I have made a backup with xRecovery to save my 2.1 [Eminence v1.2]
then I stucked with SE white logo, I pulled the battery out, rebooted and went back to xRecovery..
so If you didn't made any backup, use Flash Tool or reflash.. same thing, same result
Alejandrissimo said:
Just flash with FlashTool a clean full firmware, its very easy
http://forum.xda-developers.com/showthread.php?t=920746
Greettings
Click to expand...
Click to collapse
That doesse nt work for me. The phone cannot go in to the flash mode...
I'm dead, techyyy, plz help?
Downloaded flash tool and cannot work, just the logo there and i can't do anything, not mount it into flash mode....BOOT LOOP!!!
Stuff xRecovery, Crap my phone! Not gonna use it again!
Help!!
SEUS
Just download the Sony Ericsson Update Service - SEUS - Run it - follow the prompts - force a system restore - it will work.
http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/updateservice/xperiax10?cc=gb&lc=en
Hold the back key while putting in the battery, cable already connected and SEUS running - your looking at the bootloader saying - no firmware - so load one onto it and your good!
Thanks man, its all working
Thanks
Aussies are awesome
finally fixed
btw im melbourian too
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
You can use Update Service to fix it
you need to flash your phone,i had the same problem and was worried my phone was dead,it should work,let me know if you have trouble
ice_pick88 said:
please help me
i was updating my x10 via pc companion and then i accidentally pull off the cable and now my x10 doesnt work anymore.
is my x10 bricked already? how can i fix this?
THANKS!
Click to expand...
Click to collapse
The X10 is impossible to brick, that is about the only good thing with the locked bootloader that SE uses.
You should be able to resolve your problem by starting PC companion agian, and follow the instructions as you did the first time (when you pulled the cable). When inserting the USB while holding the back-key down the phone enters flash mode, this flash mode does not get overwritten when flashing the android OS, so even if the OS is corrupted the flashmode still works, and can be used to rewrite a fresh copy of android to your phone.
Its an easy fix,flash the phone on flash tool
Sent from my X10i using XDA App
Use flash tool on PC not xrecovery
Sent from my X10i using XDA App

[Q] x10 stuck on Sony Ericsson screen

Hi all,
I tried to put a other custom rom on my x10 but it didnt work:
First i rooted the phone, then istalled xrecovery then i booted into xrecovery and selected custom rom, now my phone booted but its stuck on the Sony Ericsson screen
Flashtool is able to root the phone but then the debugging mode error comes,
Seus cant connect with the phone because i cant boot into save mode, also flashtool cant connect with the phone if i try to flash it.
im out of ideas!
HELP!
sorry for this bump but im desperate!
First of all. Was your root successful? If yes then does your base band support the rom that you're trying to install because one gets stuck in the boot loop if the baseband is not correct for that particular rom.
Cheers!
AdY
Sent from my Xperia X10 using xda premium app
It says the root was succesfull, but then you have to enable USB-Debugging mode but thats impossible beacause there isnt a correct rom on the phone so you cant boot and enable USB-Debugging mode.
I had the same problem 2 days ago.
I fixed it by downloading http://forum.xda-developers.com/showthread.php?t=959821 this one
Place it into flashtool, and wait till flashtool gives you the message to connect your phone in flashmode.
(im probably sure you know how to, but ill explain it anyways, remove your battery (because its stuck on the logo), wait a few seconds. put it back in. hold the back button, and connect the usb wire, untill the ledlight turns green.. fast press 'ok' on the flashtool screen, otherwise your phone will go out of flashmode)
Thanks, for the reply,
Ive contacted the Phone house, and they sended it back to SE, now SE says the phone has water damage, very wierd but still ill get it back today and then try to flash it your way

Plzzzzz help to fix my bricked X10 MINI

Plz help me out. I installed xperia mini rom in my x10 mini (by mistake) and now it is not going beyond Sony Ericsson logo.
I can't afford to loose my phone so please help me.
You're going to need to use the Sony Ericsson Update Service (SEUS) , downloadable from the Sony Ericsson website.
Thankx bt I have already tried that. The problem I encounter is that the software doesn't recognize my phone;-(
sent from my nexus s4.0.1)
have you tried using a flash tool and flashing the firmware?
Sent from my R800i using xda premium
Did you try to hold the back button while connecting your phone to SEUS?
Hi, I need help too with my bircked phone. I can not flash firmware, also did not work for me SEUS nor PC companion.
From flashtool I got this message (atteched pic).
You need to unlock your bootloader to flash new kernels. It says so in the instructions. You can tell yours is locked by having a look at VER= right before the error. When you unlock your bootloader, that R turns into r. You won't be able to flash any kernel without unlocking it first, which will void your warranty.
How to unlock the bootloader:
http://forum.xda-developers.com/showthread.php?t=1254225
The info is all around, there's little reason to be banging against these issues...
With S1tool I cant get to flash mode, the led is red blinking. No green led.
Also before I bricked phone flashing nAa kernel I unlocked the bootloader.. But looks NOT
I already had similar problem and discovered that my issue was caused by build.prop file. When I installed a rom from other device the phone was not starting because build.prop was not correct.
I supose you had usb-debuging active so while stuck at the logo try to use a program like "ADB mask controller" to check your build.prop. If you see minmi there then it's incorrect, for X10 mini it should be robyn. Replace the file
I just want to go back to stock rom. But SEUS nor PC companion not workin for me, coz I cant get to flash mode. I cant turn on my phone, I not see SE logo too.
Flash Mode normally works, you press the back button and insert the cable without letting go of the button. But to this when the applications requests it because the phone doesn't stay in flash mode unless there is activity.
After long pressed back button (>5 min.) I get to flashmode with SEUS, but then.. failed (pic below).
From PC Companion I get error too.
The main quastion - is it possible to unbrick my phone??? I almost gave up
arpu26 said:
After long pressed back button (>5 min.) I get to flashmode with SEUS, but then.. failed (pic below).
Click to expand...
Click to collapse
The SEUS should work mate.. Was ur phone charged while doin this?? N can u get into recovery by hittin the back button when sony ericsson logo cums??
faiyyaz said:
The SEUS should work mate.. Was ur phone charged while doin this?? N can u get into recovery by hittin the back button when sony ericsson logo cums??
Click to expand...
Click to collapse
I dont know if phone is charged, coz I cant turn it on. But I have left it to charging for all night.
Also I dont have recovery. I cant turn on my phone so I cant see any logo.
arpu26 said:
I dont know if phone is charged, coz I cant turn it on. But I have left it to charging for all night.
Also I dont have recovery. I cant turn on my phone so I cant see any logo.
Click to expand...
Click to collapse
Read ur first post .. it says cannot go beyond sony ericsson logo.. N now it is that it dosnt turn on..basically the battery mite be down..charge it again n giv it a try (considering the chargin port is fine) n by that time Il post u a link if I find regardin gettin into recovery if bricked.. Had read it somewer..wil hunt n try solvin ur prob by as soon as possible as I am on xda app on phone for now..
arpu26 said:
From PC Companion I get error too.
The main quastion - is it possible to unbrick my phone??? I almost gave up
Click to expand...
Click to collapse
if I can only hold your phone and unbrick it.
Hei guys, any more suggestion how to unbrick my phone?
Can u connect through an ADB like interface.
Sent from my PC36100 using XDA App
Not tried. How to do dat?

[Q] XPERIA X10 Booting problem

hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Please give some info.
Have you unlocked bootloader?
What rom are you trying to flash?
When you start to flash, flashtool asks for disconnect the phone, power off and connect again with BACK button pressed. Then the process continues...
After flashing kernel you must enter to recovery and install zip file from sd-card.
Regards.
I was tryng to flash rom 3.0.1.G.0.75 on Gingerbread 2.3.3 and ya I was supposed to enter downloading mode but before I do dat phone has stuckd on... gets on wid sony ericsson logo evn if I dnt swtch on...help me..
Please, can you provide the followed procedure ?
Maybe this thread can help you http://forum.xda-developers.com/showthread.php?t=1226826&highlight=lock+bootloader+again
Which log do you use, PC Companion, SEUS, Flashtool...?
Do you have a CWM recovery ?
If you don't know how (or are afraid) to use flashtool...
You can do that :
1/ Launch SEUS (Sony Ericsson Update Service) HERE
or PC Compagnion HERE
2/ Turn off your phone, remove the battery over 5 seconds, replace it.
3/ Hold the right button (the one with the arrow) and plug your phone on your computer with usb (It calls flashmode)
4/ The green led must be light on and SEUS or PCC recognize your phone...
5/ Now you just have to follow the instructions to install a stock rom.
If it doesn't help, you can use flashtool... A great tuto HERE Thanx to Crowds
With it you can unlocked the bootloader and install a new kernel with CWM recovery inside...
Install a new rom, root your phone... ans so more stuffs...
I hope it helps...
I've been told to install x recovery on the computer,take out battery n unplug the phone .Then have flash base band on computer(it will then show that its trying to download)connect phone in flash mode.to do this hold down the bottom right hand button(the back arrow)on your phone then put battery back in(KEEP HOLDING back arrow button)and plug the cable back into your phone.I hope this helps.GOOD LUCK BUDDY!
I am having the same problem with my Xperia Neo, i tried to connect my phone to PC Companion and it says. "PC Companion was unable to connect to your phone, please disconnect and connect again"
My phone is just sitting there with the words "Sony Ericsson" flashing on and off, I fear that my phone is bricked but im not 100% sure, if there is anything that can be done please help!!!
Can you explain more what you're doing ?
Do you did that :
Launch Pc Compagnion
Plug the phone
Mount the sd card
EDIT : Sorry i read too fast your post... Your phone can't turn on you're stuck on the bootlogo of SONY ERICSSON...
Do you plug the phone in flashmode ?
nicks2587 said:
hey guys while I was falshing my rom of xperia x10 via flashing tool follwed the procedures given after it completed and asked me to unplug the device and switch it on... now phone dos not boots and has got stuckd at sony ericsson logo...its not moving ahead... not even booting.. I ve tried to connect again in flashing tool flash mode still its not working .. phone automatically gets disconnected.. also wen I put the battery inside it turns on to sony ericsson logo automatically even if I dnt use power on button.. help me out... plz plz plz
Click to expand...
Click to collapse
Some of the custom roms are flashed with xrecovery or cwm,
Now what kind of rom did you want to flash?
Maybe you went wrong that in procedures said "flash the rom".
Put out the battery then put in and turn your device on then restore your previous rom then try again and install(flash) new rom.
Good luck.
Sent from my X10 using XDA

[Q] Can anyone help me please to solve the problem......????

My Sony Ericsson Xperia X10 mini is not charging... nor its getting switched on.. nor its getting connected to my computer.
Actually my mobile was working properly.. i unlocked boot loader.. i rooted my mobile.. and i flashed with nAa 2.6.32.60 04 kernel.. after that i restarted my phone.. the boot animation came.. later nothing appeared.. so i thought something wrong and i restarted again by pressing home and power on button... now its not getting on... no LED indication also... not able to get connected to my PC and its not charging also...
Guys can you please help me what can i do....??? please... :crying::crying::crying:
HELP me... HELP HELP HELP........
kushlushi said:
My Sony Ericsson Xperia X10 mini is not charging... nor its getting switched on.. nor its getting connected to my computer.
Actually my mobile was working properly.. i unlocked boot loader.. i rooted my mobile.. and i flashed with nAa 2.6.32.60 04 kernel.. after that i restarted my phone.. the boot animation came.. later nothing appeared.. so i thought something wrong and i restarted again by pressing home and power on button... now its not getting on... no LED indication also... not able to get connected to my PC and its not charging also...
Guys can you please help me what can i do....??? please... :crying::crying::crying:
HELP me... HELP HELP HELP........
Click to expand...
Click to collapse
Try to flash 2.1 firmware using flashtool
Hi Bro, Try This Method:
1. Flash The 2.1 Stock ROM From SEUS.
2. After You Flash 2.1, Verify Your Phone If Its Rooted Or Not.
If have superuser app at menu, it means Your Phone is Rooted.(Proceed To Step 3)
if There Is No superuser App to your phone, it means you need to Root Your phone And Unlock the bootloader again
3. Install xRecovery to your phone
4. after That, Backup Your Personal files(Apk,sms,contact etc)
5. Backup Via xRecovery
6. Flash nAa-14 kernel then boot to recovery mode Then Flash MiniCM7 2.2.2 or Other GB Rom
7. Thats it...
Take Note: Im not Responsible If Anything Happen To your phone.
Sent from my E10i using xda app-developers app
Abigail said:
Try to flash 2.1 firmware using flashtool
Click to expand...
Click to collapse
Hi Abigail, thanks for suggestion.
But my mobile is not able detect when i connect it to the computer.... what can i do...?????
Help me....
Renzki™ said:
Hi Bro, Try This Method:
1. Flash The 2.1 Stock ROM From SEUS.
2. After You Flash 2.1, Verify Your Phone If Its Rooted Or Not.
If have superuser app at menu, it means Your Phone is Rooted.(Proceed To Step 3)
if There Is No superuser App to your phone, it means you need to Root Your phone And Unlock the bootloader again
3. Install xRecovery to your phone
4. after That, Backup Your Personal files(Apk,sms,contact etc)
5. Backup Via xRecovery
6. Flash nAa-14 kernel then boot to recovery mode Then Flash MiniCM7 2.2.2 or Other GB Rom
7. Thats it...
Take Note: Im not Responsible If Anything Happen To your phone.
Sent from my E10i using xda app-developers app
Click to expand...
Click to collapse
HI Renzki, my mobile is not detected when i connect ti to the computer/laptop.
I did as you said before my mobile got stuck. After doing flash, the flashtool ask to disconnect and switch on mobile.
when i switched on, at first time the boot animation nAa appeared. suddenly it became black screen. i thought something happened and tried to restart by holding home button and power on button. later it din switch on, if i connect it to computer also its not able to detect and even charging also not happening.
please help me what to do.....???? :crying::crying::crying::crying:
Try to use another usb cable or maybe u forgot to install the driver
Sent from my E10i using xda app-developers app

Categories

Resources