first off i would like to state that i will pay anyone $25 who can help me figure this out. i have paid plenty of people through paypal for their assistance in the past. so here it goes.....
i had CM7 on my hd2 Nand android 2.3.3, i need to turn it back in for services and need it to be stock again. i have looked online for resources on how to do this and i managed to get it back to stock however the SCREEN DOES NOT WORK!!!! it comes on, but it does not respond to touch. i have tried resetting it. but all it does is go to the setup screen and i cannot skip any of the steps. ALL THE HARD KEYS WORK THOUGH!!! JUST NOT THE TOUCH SCREEN.
my mother has a regular un-abused hd2 and when i acces the RedGreenBlue screen it gives me this information (as we all know all of the info is on the top Red portion of the screen): PB81120 HX-B3
SPL-2.10.000 8G XE
MicroP(LED) 0X05
MicroP(Touch) 0X40
on my HD2 i get: PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0X05
MicroP(Touch) 0X50
what am i doing wrong and does this have anything to do with the phone not responding to touch input?
additional info: my mothers hd2 has: Rom 3.14.531.1 wwe (04666)
Radio 2.15.50.14
OS 5.2.21913
manilla 2.5.20181424.0
anyone? please?
assuming its a tmous (green send key red endkey) then get a stock tmous rom (and ONLy a stock tmous rom, not any other rom, go through the t mo website just to be sure, , a non tmous rom will brick it (( course if its under warranty, then that type of brick would still be accepted, lol))
anyway, get the stock tmous rom, put phone in bootloader (stripey screen) connect usb, run the romyoudownloaded.exe
PB81120 is T-Mobile US version.
To get ROM 3.14 for your HD2 go there http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo and enter your IMEI or search XDA forum for another download link.
Use sd card method for flashing STOCK ROM. See this TUT: http://forum.xda-developers.com/showthread.php?t=653614
ok guys i will try what above recomendations thanx.
Edit: i did manage to to return back to stock before. the only problem is that the touchscreen would not work. it came on and saw the startup screen. when the phone went to the set-up screen i tried to skip the set-up process to start using my phone right away. but it was NOT responding to my touch. so i figured that i did something wrong. anyone ever have a problem with the touchscreen not working? it worked fine when i had cm7 hyperdrois on it.
i downloaded T-Mobile_HD2_MR_Software_2.13.531.1 from the tmobile website. it doesnt have a .ruu or .nbh extension. In the tutorial to flash via SD card it states:
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
the rom i downloaded is not zipped and it shows up as an application.
i am not quite sure how to do this with the real rom from tmobile...do i put offcial rom from tmobile unto sd card and try to flash it?
thank you guys for your help so far this is all greatly appreciated.
The download is an exe, yes, but really its an executable zip. You can..
Change tgw extension from exe to zip
Or
Right click it and choose "open with (insert name of whatever program you have installed to handle zips)"
Or
Run the exe, and it will extract itself into 8 or so files, copy the one you need before cancelling the running program.
However,since you already have stock spl, there is no need to use SD card method, just put phone in bootloader, connect USB, run the exe.
I have done that. But the touchscreen does not respond to my touch. I cant get passed the set-up screen cause i cant press the "skip" button. I have ran the .exe application about 3 times and i have my stock winmo 6.5. Why my touchscreen not working?
Sent from my HTC Glacier using XDA App
Should i try SD since i have done it through USB 3 times?
Sent from my HTC Glacier using XDA App
Lol, cos its broke, isn't that why in your first post you said you wanted it back to stock to go to service?? Well, now its stock and you can send it in.
My hd2 charging inlet is broke so i have to use my mother's hd2 to charge my battery and put it back in mine. Has nothing to do with screen. When i had pongsters cm7 it worked. Occasionally the screen would not respond. Any help please.
Sent from my HTC Glacier using XDA App
ahhhh gotcha. no, sorry, not seen a fix for that. (got one with an unresponsive screen myself, happened last night, totally out of the blue, , glad i bought a replacement last month!)
So basically i am SOL? And i now have to send it in for both services. I should be okay since when they boot it up it will show a stock rom right? I have been hearing alot about hd2's screen going out like that. I guess it has to do with "resistor" burning out? So based on my info on my first post, my HD2 is back to stock right?
Sent from my HTC Glacier using XDA App
The key to warranty is the spl,, so yes yours is fine.
Related
PLEASE MOVE THIS TO THE TMOBILE HD2 SOMEONE
Hey guys, i'm trying to get a replacement for my HD2 since I believe i've gotten a bad shipment one however i'm running:
R 2.10.50.26
G 15.39.50. 07U
D 2.13 KUMAR C5
[this is what appears under the stick together when it freezes]
I downloaded the 2.13 stock ROM from the website here, opened in winrar, extracted the ruu file, reformatted my microSD to a FAT32, placed the file on it and renamed it to LEOIMG and then helpd down the down vol button and hit the power button, it flashes the rainbow screen thing, flashes loading really quickly then goes back to the rainbow screen and says the following [pic included but taken from a crapberry so sorry it's hard to read]
[apparently I can't post pics? so here's what it looks like I can provide a picture link via PM unless I get verified]
[RED BLOCK]
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x05
[GREEN BLOCK]
[BLUE BLOCK]
[WHITE BLOCK (also says serial)]
Any ideas why I cant flash the stock ROM so I can return this without voiding the warranty guys? It'd be much appreciated.
Also if it matters i'm using the TMobile 1024 HD2. I just got it about 5 weeks ago
trying to use a 16gb sd card? 99 times in 100 they fail. (well, the one that came with the tmous does anyway)
You dont need to use card tho...
assuming you have a tmous phone, (you didnt say, and you're posting in the regular leo section, but im gpnna assume you have a tmous)
1 - run hspl3 - choose 2.08.0000
2 - flash the stock rom 2.13 using usb
done
I'll give it a shot and leave an update, apologies if I posted in the wrong area. The reason i'm trying from an SD card is because for some reason the phone keeps freezing and I pull the battery 10+ times a day and it gets stuck at the stick together screen alot [i'm assuming i'm having some issue with it hardware like a bent pin but since it's getting power i'm not sure???] I figured an SD install would go smoother. My windows Vista doesn't seem to like it too much
dont worry about it not booting, so long as you cam manually get into bootloader, you can run hspl and do usb flashes from there. The phone doesnt need to be booted.
As for teh pins, they should all stick out at teh same angle (i.e straight out, all teh same)
OK update:
I tried formatting my good 4gig SD card, put the file on it leoimg and it ran, got to the installing, gave an error, I took it out now. I go into the bootloader now [just read your reply] and it says
RUUNBH
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0x05
cotullaHSPL 0x50
[green box]
Upgrade ROM code error Please try again
[Blue box]
[White box]
USB
I have it plugged in via USB now and i'm in the bootloader so i'm guessing this is a good sign, I try running HSPL3_PKG.exe so I can do as you suggested however I get a rapitool.dll error or something, I tried just running the T-Mobile_HD2_MR_Software_2.13.531.1 which is the ROM exe and get some rapitool error as well so I get this genius idea that it must be the lack of windows mobile center6.1 or whatever. I go, download the 32bit and it says its not supporting my processor? so I got the 64 bit and have the feeling i'll get the same error. I'm running Windows Vista, AMD turion x2 so I think it's a 64 bit. I'll reupdate once I try it all again.
UPDATE AGAIN:
I installed windows mobile center [I needed the 64 version dur de duur]
I ran the HSPL3_PKG and got it back to the 2.08.0000
I went to run the 2.13 update and it freezes at 9%, says that theres an error 290 invalid command. I tried to redownload and try again afew times to no luck so far. Here's what the bootloader says now
[RED BOX] RUUNBH
PB81120 ss-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
[GREEN BOX]
Upgrade ROM code error Please try again
so on and so forth.
any ideas would be appreciated lol
CURRENTLY TRYING:
Downloading the stock ROM from that thread [one that's shipped without the SPL?] hopefully it works when I try to run this one and I can just take it back finally. If not and if noone has any ideas i'll just try to bring it back without a ROM on it [I think that's whats happened now] and just say that I tried installing the official update off the tmobile site and power died somehow and I have no idea what happened maybe?
MOST RECENT UPDATE:
OK so here, I got the shipped stock ROM, loaded it up on the microSD and it goes to loading when I go into bootloader and stops. I tried via USB and bootloader and it never makes it past 0% and just stops. I'm currently assuming that there's no actual ROM on my HD2 for now?? When I run the 2.13 ROM by TMob it shows the upgrade from [blank, there's nothing there] and then to: 2.13 before it errors as I have mentioned before.
Currently i'm running out of ideas, I certainly hope I didn't brick my phone and there's gotta be a away around this somehow. If there's nothing there I should try to put HSPL back on and try another custom ROM perhaps? hmm. I'll give it a try since i'm at a loss and noone seems to have any ideas. Please if ya do feel free to share them, I wish I didn't have to experiment like this on my own with not too much knowledge on mobiles. My computer knowledge rests in networking and random bits like Java :s AP comp sci helps not here
*insert happy dance*
slowly but surely i'm learning my way around this...I think
I have done the reverse now and got HSPL back on my phone. Currently I'm trying to install wither the stock rom via USB and bootloader or the Energy.Leo ROM one though both keep freezing about halfway through the install. It's rather annoying because it's happening at what appears to be random times. I'm still considering goign back to SPL and claiming their official update fragged my phone and I have no idea how but I want to keep this trying.
you're sending it back, right? well only the spl is important, doesn't matter about the rom.
so long as in bootloader it says 2.08.0000 or 2.10.0000 then you can send it back.
I think from what i'm hearing your Radio partition is **** up.
Or ur CID isn't working correctly.
Try flashing stock rom with a goldcard....
Or do a task29 and flash stock rom again.
Ended up figuring it out finally, afew days ago, new HD2 should get here tomorrow. I ended up putting the HSPL back onto it, flashing a custom ROM, upgrading it via USB/boot loader screen to the stock ROM that it came shipped with then downloading tmobiles from their site and putting the update onto it and everything is currently as it should be. Radios, ROM and SPL
Hello all... tried to be a little geek and installed a custom Rom (Artemis V32 with radio 2.12.50.02_2) and that went ok. Then I copied an Android version to my sd card, and that went also ok.
Then I installed a bootloader so I could choose Android or WM, that went ok too.
But since then I had some regular crashes in Android and also with WM.
I decided to install a stock Rom (found via Usenet; Stock ROM (NLD) 1.72.172.0 met radio 2.07.51.22_2 en SPL-1.66.0000 ) and things went bad.
I have tried all kinds of things so resolve the issue:
- Put the stock rom on the sd card (formatted fat32, size 4gig) and renamed it to loeimg.nbh and started it up with the volume button down: no success
Message:
PB1100 HX-BC
SPL-1.66.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
- Connected the hd2 with the original cable to my pc (Windows 7 Ultimate, and tried also WinXP SP3) and tried to install it via the .exe file from another stock rom I downloaded via the HTC website.No succes, the software starts-up, I can click yes, next, click yes again at "I completed the steps indicated above" and then I get the screen current information about your pda phone Image version does not mention any version at this point.
If I then click on update I get the screen that says from image version: to image version.
The from version is not filled in, so I think the fault has something to do with this.
After I clicknext 2 times I get the progress screen, but nothing happens then anymore. It keeps showing 0%
If anyone can help me out with this it would appreciate it a lot! And if you need any additional info, please let me know...
Thanks in advance,
Friendly greetings...
you no longer have hspl installed. It was removed by the (failed) stock rom from sd card flash attempt. In bootloader, see your spl ends .0000? that tells you hspl is gone.
Manually enter bootloader, connect usb, count to 20, run hspl2(right click run as administrator), choose 2.08.hspl.
When it completes, re enter bootlaoder (hold down vol as the phone restarts at 100%), wait for bootloader, wait for the word serial -> usb, run your rom flash over usb.
Thanks for the quick reply... as soon as I'm back home I'm going to try it out.. I'll post the result here..
something similiar happened to me some months ago..
should work
DN41
oh, and the reason the "from version" is blank is because that is read from the registry, but we put the phone in bootloader ourselves first so it can't see the registry. that's also why when you flash radios you see rom version info there. it can be ignored.
Do not forget to remove loeimg.nbh from your memory card before trying to flash under windows.
Thanks for the reactions... great to know I am not alone in this...
I performed the actions as described and I got the message "we hacked it"
I then tried to install a stock rom I downloaded but my phone turned off then at 11%
I have the idea that my battery is not loading anymore as I can't see the orange led burning when connected to the adapter/computer.
Ordered a new battery yesterday evening and will receive it normaly/hopefully today by mail. Then I will try again and share the results.
Thanks again all for the great support so far...
check the battery pins closely, hundreds of people have bent them poppng the battery out.
Ok, checked the connection of the pins.. these are ok I think.
Battery-led is still not showing went connected to usb.
So now my screen states the following:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CottulaHSPL 0x40
What rom can I now install? Only an official one?
I tried to download an official rom from the htc website (after inserting my serial), but when I run the
RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship it shows a message that the file is corrupt.. and this for about 6 times now...
I feel the noob-level is rising extremely now...
TitusV said:
What rom can I now install? Only an official one?
SPL-2.08.HSPL 8G XE
Click to expand...
Click to collapse
.hspl means hspl is installed so you can flash any rom.
I tried to download an official rom from the htc website (after inserting my serial), but when I run the
RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship it shows a message that the file is corrupt.. and this for about 6 times now...
(
Click to expand...
Click to collapse
all i can say is try another rom. just stick to usb flashing, protect hspl.
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
I've been going through threads for some hours now but haven't round a solution, so apologies if it already exists:
I've had a problem with my HD2 freezing. It's been sat in a drawer for a while but I thought I'd try and sort it out.
So first I did task29 and that seemed to go OK.
Next I tried to install the stock Vodafone ROM. It buzzed 7 times when the update started and then stuck at 9%.
Having failed to put a ROM on it I then followed the instructions to remove HSPL. When I start it (VOL down, LEOIMG.nbh on FAT32 formatted SD card inserted) it just goes to the tricolour screen and does not flash/load whatever the nbh file.
I put the phone in the fridge for a while and re-tried the ROM update and that reported success, but it won't boot so it's back in the fridge - I'm getting worried about the battery now.
I see someone else had the same problem removing HSPL but don't know what their solution was - am I missing something?
The phone is currently sat in the fridge because I think the 7 buzzes is a heat (processor) issue so assume it's knackered anyway but I still want to remove HSPL.
[thanks for moving the thread - apologies for putting it in the wrong place to start]
UPDATE: I've now successfully updated the ROM to standard UK Vodafone but still no joy with removing HSPL. I'm using a 2GB SD card FAT32 format file names LEOIMG.nbh but I just get the coloured screen. I'm using the nbh file from the current ROM. Tricolour screen reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
And then 'serial' or 'USB' at the bottom changing as I plug it in.
Rather than using SD card stock flash, which contains a radio, (your symptoms are often the fault of the radio) you should try running hspl2, and setting spl 1.66.0000
I've also got personal expwrince of spl 2.x refusing to downgrade to 1.x, even when SD flashing, so radio problems aside i now remove spl/hspl 2.x using hspl2.exe and only then perform the SD flash.
Need a little help here, my mate got a HD2 off ebay, which was stuck at android loading screen. I have no idea what the original owner flashed or didnt flash. I can get into the tri-colour screen ok and it shows 3.03 spl, but refuses to change to usb from serial. How can I get access to flash something onto this that will boot?
samsamuel said:
Rather than using SD card stock flash, which contains a radio, (your symptoms are often the fault of the radio) you should try running hspl2, and setting spl 1.66.0000
I've also got personal expwrince of spl 2.x refusing to downgrade to 1.x, even when SD flashing, so radio problems aside i now remove spl/hspl 2.x using hspl2.exe and only then perform the SD flash.
Click to expand...
Click to collapse
I've not been on the forum for a while since I got the Sensation - can you point me to an hspl2 thread for the why's, wherefore's & how to's?
Thanks.
EDIT: Found it thanks.
To change the SPL you need the device in bootloader mode (tri-colour sreen) than you connect the usb cable between PC and device. in the white section of the bootloader should say USB (if usb sync drivers on the PC are ok). next you need HSPL2.exe, HSPL3.exe or HSPL4.exe from here - http://forum.xda-developers.com/showthread.php?t=611433 . depending on your current SPL/HSPL ver you'll choose one of them.
About the "It's working in the fridge" problem - sorry to hear that. It's pretty much fatal. Check out here - http://forum.xda-developers.com/showthread.php?t=982454
I just got back from repair an HD2 with the same problem, vibrating 7 times, ect., and it cannot be repaired. you need new main board but they are no longer produced, and even if you find one from china it's from 280-250 USD.
I hope it's not the same with you, but...
Well I did the HSPL2.exe thing and that was a piece of cake - HSPL now removed and ROM properly installed.
It still does the vibrate 7 times thing every now and again so it looks like it's going on ebay as junk
Despite my best (inexperienced) efforts to get my original windows phone back, I have failed.
A while back I stumbled through converting my phone to Android from Windows 6.5, this is the exact details on my phone currently...
Android Version 2.3.2
Baseband 15.42.50.11U_2.15.50.14
Kernel Version [email protected]#26
Build Number Gingerbread HD2 v2.1
I would be ever so grateful if somebody could 1 tell me if it possible to go back to original phone, and 2, how I can go about doing that as i seem to be coming up against walls with what I try, as I said i'm not the best with software.
Many thanks to anyone with the time to advise me.
transitconnect said:
Despite my best (inexperienced) efforts to get my original windows phone back, I have failed.
A while back I stumbled through converting my phone to Android from Windows 6.5, this is the exact details on my phone currently...
Android Version 2.3.2
Baseband 15.42.50.11U_2.15.50.14
Kernel Version [email protected]#26
Build Number Gingerbread HD2 v2.1
I would be ever so grateful if somebody could 1 tell me if it possible to go back to original phone, and 2, how I can go about doing that as i seem to be coming up against walls with what I try, as I said i'm not the best with software.
Many thanks to anyone with the time to advise me.
Click to expand...
Click to collapse
yes, it's possible... i've deone it about a month ago... i simply put HD2 on tri-colour screen and connected to pc... after it said USB instead of SERIAL i launched the last stock RUU.exe (downloaded from htc site) from pc and the RUU flashed stock WM 6.5 on HD2... everything worked like a charm
lukes91 said:
yes, it's possible... i've deone it about a month ago... i simply put HD2 on tri-colour screen and connected to pc... after it said USB instead of SERIAL i launched the last stock RUU.exe (downloaded from htc site) from pc and the RUU flashed stock WM 6.5 on HD2... everything worked like a charm
Click to expand...
Click to collapse
is it t-mobile? if its t-mobile try to download this http://www.shipped-roms.com/downloa...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
transitconnect said:
Despite my best (inexperienced) efforts to get my original windows phone back, I have failed.
A while back I stumbled through converting my phone to Android from Windows 6.5, this is the exact details on my phone currently...
Android Version 2.3.2
Baseband 15.42.50.11U_2.15.50.14
Kernel Version [email protected]#26
Build Number Gingerbread HD2 v2.1
I would be ever so grateful if somebody could 1 tell me if it possible to go back to original phone, and 2, how I can go about doing that as i seem to be coming up against walls with what I try, as I said i'm not the best with software.
Many thanks to anyone with the time to advise me.
Click to expand...
Click to collapse
We'll sometimes it's a combination of bad luck, what you can do is to check the battery points in the phone, sometimes they are bend so they don't make a connection, then I suggegst to power your phone to the battery charger and hold down the volume button that should bring you into bootloader, you can also do this with a sd-card with the original rom on it, then it's not necesarry to charge your phone for 50%, you have to rename the RUU_signed.nbh file into leoimg.nbh and copy that file to your sd-card, then it will ask you directly to update the phone.
Succes
Back to stock
Rataplan said:
We'll sometimes it's a combination of bad luck, what you can do is to check the battery points in the phone, sometimes they are bend so they don't make a connection, then I suggegst to power your phone to the battery charger and hold down the volume button that should bring you into bootloader, you can also do this with a sd-card with the original rom on it, then it's not necesarry to charge your phone for 50%, you have to rename the RUU_signed.nbh file into leoimg.nbh and copy that file to your sd-card, then it will ask you directly to update the phone.
Succes
Click to expand...
Click to collapse
Well i did exactly that, Not only that, tied installing using the RUU which has been downloaded from HTC site...
using the RUU it give me the error ERROR [262] which is
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
While installing from SD card
On the RED GREEN BLUE Screen is
PB8110 HK-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade ROM code error Please Try again
then when it goes to the white screen says Loading...
and it stays like that... anybody has any suggestion for me or did i just brick my phone while trying to get it back to Stock ROM
Try another rom, probably the rom is corrupt.
Succes,
Downloading 9 different ROMS at last found the right one which did flash properly. Thanks for the help.
You must remember when flash via SD you loose the HSPL as first stage of SD flash installs standard spl so loose the CID bypass you had with the HSPL.
Always best try & flash from PC as you have CID bypass & retaining the HSPL is safer & any generic HTC ROM can be used (TMOUS>usa t-mobile should use original WM rom - see htc wiki)