I have been using oodie MIUI prime 7 for o week, no problem. Today i have installed all apps using flashtool, when i finished, rebooted phone and it stuck on the oodie miui sign, nothing happen,I cant get into xrecovery/CWM to flash again. pcompanion/SEUS/wotan server dit not recognize the phone so i cant install original software
When i tried to root my X10 half a year ago i did something wrong and it stuck on the SE logo, but i use wotan server, it recognized it, flash original software and it was ok.
Can you help please, how can i repair it, or flash original soft
Thank you
use SEUS to repair it
Sent from my X10i using xda premium
how can i use it, if SEUS dit not recognize the phone. If i start SEUS, connect the phone, nothing happens
Download 2.1 generic firmware. Now then put your phone into flash mode and flash 2.1 generic.
Your phone will now boot.then you'll need to go to PC companion and update to 2.3.3
Sent from my SO-01C using xda premium
Thank please
Sent from my SO-01C using xda premium
U may aswell just flash 2.3.3 global generic in flashtool then u won't need to use sues/ pcc as you'll be back to stock gb
Sent from my X10i using XDA App
Related
Hey guys,i got an x10i, wit 1.6 firmware and wanted to update to 2.1. I saw the option of update in the phone menu,so i tried it and it actually found update and downloaded it.but after the restart i got exclamation mark and no boot.the phone has no warranty so can i fix it my self?
Sent from my GT-I9000 using XDA App
Reconnect the phone to SEUS and run " repair " option, should reflash the phone.
Try taking the battery out first and let the phone set a bit, reinstall batt and see if she boots up, remember, 1st boot takes a few minutes after you flash new firm ware.....
Best regards,
Chris
I took the battery out long time ago.havent tried yet.One more wuestion.is there a recovery built in?or a factory reset?and how to fo this if i neef to.
Thanks a lot
Sent from my GT-I9000 using XDA App
Depends on where and how you upgraded to new firmware, if it was thru seus / pc companion, then you just have factory firmware, no recovery.
If you used the flash tool from XDA and picked the firmware on that page, and installed xrecovery, then yes you have it. Clear as mud, sorry.
IF you have to run the seus pc companion to " repair " the phone, you will have only factory sony firmware. You can search for the firm ware # and flash tool , instructions, root methods, xrecovery, all are on xda!
Hope this helps,
Chris
As i said i used the phone menu for this update.No seus,no pc companion,just update through the phone menu and wireless network.
i downloaded seus and and it sais:
Failed checking application versions, please reinstall the application and make sure you have the latest version
what is this now?
Any link for the right one?
Thanks again
try the repair option on seus, comes up when u first connect the phone to pc companion,
Sent from my X10 CM7 TripNRaVeR using the XDA mobile application powered by Tapatalk
Hello I have researched many sites and I have no found a solution:
the x10i, an international x10 has a common problem: it will start up with a vibration and have a black screen still. It won't boot up. Has ANYONE found a solution this problem?
Any technicians out there that want to impart their knowledge? My phone has not been working well over a month. Is there any technicians you can refer me to? PLEASE, I am need of help. No one on the internet has solutions and I am unable to get the information to the international warranty.
If anyone has the information to the international warranty for Sony Ericsson please tell me. Thank you.
Can the phone boot up into FLASH MODE? Like for using repair for seus?
Start up seus
Hook usb cord to computer. When it says to.
Press and hold back space on x10 and insert usb cable into phone. And follow directions on computer screen.
U know what seus is right?
A program by sony ericsson u can download of their website
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Hi when I use the SEUS my phone is "not connected". My computer will not recognize the phone no matter what I do. I have left it charging [although I do not know if it is charging, there is no screen display at all] and it is still not recognized on my computer.
My last solution is try flashtool but at least try it before u think about turning in your phone to repair or something
Flashtool connects the same way but it connects through a different program.
Flashtool is availible through the x10 development section.
It may not work though since ur phone isnt reconized by the computer. But try all solutions the site provides here
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
I really don't feel comfortable flashing my phone because I would have to root it first. I'd like my warranty to still be intact.
Are there any other options?
Flashtool i believe DOESNT RUIN WARRANTY correct me if i am wrong other xda members, but it will flash the latest sony hardware to your phone. Its the same hardware from seus but u get to pick the baseband version and build number of your choice. This erases all data off phone so this isnt rooting.
Seues flashes firmware too.
Xrecovery flashes ROMS
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
My concern is that the phone is not being recognized at all by the computer. Not too sure flashing it will happen in the first place.
But did u try it? Sometimes flashtool reconizes differently than seus in my opinion
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Thank you but firstly does anyone know if flashing voids warranty?
It shouldnt since its SE firmware from SE but flashtool puts it on ur phone for you
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
It doesnt void warranty.. nor does rooting or anything else atm for that matter.. because everything you do on the x10 is reverisble (as long as the bootloader aint cracked.. even the bypass which they are experimenting with now wont cause any harm)
And one way to reverse it is using flashtool and an original se ROM. But if even flashtool doesnt recognize your phone, then i suggest you use your precious warranty...
Sent from my X10i using XDA App
folks! I bricked my phone while updating it from seus and reason was dat MY USB CABLE WAS LOOSE AND MY PHONE GOT DISCONNECTED nw on restart it shows sony ericcson logo just for a second and den shows a pic where a triange(and inside it an exclamation mark is shown) is placed over a phone's picture.
I've tried seus and flashtool and both detect my phone as long as that sony ericson logo is shown and dats just for a second.
I was using cwm recovery and had made a backup of the custom rom. And nw i cant acces my cwm coz the se logo flashes so shortly dat i am nt able to open cwm.
NEED HELP GUYS!!!
Also i want to know dat can the sony ericsson service center help me..by software installation or by changing the hardware which stores the flash memory. Plz help me i'm nt ready to throw this phone away.
Thanks.
Use FlashTool to FLASH.
I have made a guide with links included. Just search for :
2.1.1.A.0.6 GREEK .ftf
Sent from my U20i using XDA Premium App
leajian said:
Use FlashTool to FLASH.
I have made a guide with links included. Just search for :
2.1.1.A.0.6 GREEK .ftf
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Thanks buddy.. But Flash tool does not detect my device. I've installed gordons gate.. But still.. I think Flash tool does not get enough time to detect my phone. I hear a usb connection sound and SE logo flashes for less then a second and i hear a usb disconnection sound den the ! is seen and den phone shuts down.
Dinesh1389 said:
Thanks buddy.. But Flash tool does not detect my device. I've installed gordons gate.. But still.. I think Flash tool does not get enough time to detect my phone. I hear a usb connection sound and SE logo flashes for less then a second and i hear a usb disconnection sound den the ! is seen and den phone shuts down.
Click to expand...
Click to collapse
Don't give up yet. I know this problem. Uninstall Gordon's Gate. Install Sony Ericsson PC Companion (again if installed) and try using FlashTool again. This error on your phone means that the files are corrupted, maybe because a flash you tried was interuppeted unexpectedly. Your phone is not dead yet (probably your USB port has some problems and caused all this), it must be restorable.
Try and tell me if it worked.
Sent from my U20i using XDA Premium App
No dont throw it just yet, I had almost the same. Ut unsure what caused it,it was 1st time flashing it, but spent 24hrs looking though solutions but it worked, similar to what lea sez...a new dl of sony comp and re-updated it using there latest u.d. Then used flashtool and reinstalled xrecovery with it as it stopped letting me open it..took a few trys but ws ok once sony companion recd my phone an reinstalled xrec.the update in sony comp I think wasnt in clear view its in the support stn..went back to stock 2.1.
Sent from my U20i using XDA App
leajian said:
Don't give up yet. I know this problem. Uninstall Gordon's Gate. Install Sony Ericsson PC Companion (again if installed) and try using FlashTool again. This error on your phone means that the files are corrupted, maybe because a flash you tried was interuppeted unexpectedly. Your phone is not dead yet (probably your USB port has some problems and caused all this), it must be restorable.
Try and tell me if it worked.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Didnt worked man... So i had to choose the last option left ... the se service guyz... nw it back on the track.
I was flashing just a new kernal to try another rom and my phone aborted the installation of the rom then I tried to reboot it but the screen stayed blank so I tried to reflash to stock and still blank screen. I think she finally bit the dust...anything else I should try? (I have no insurance and the warranty was voided long ago) Buy a new phone probably...
Have you tried a repair with seus or PC companion?
Sent from my SO-01C using XDA App
kylec said:
Have you tried a repair with seus or PC companion?
Sent from my SO-01C using XDA App
Click to expand...
Click to collapse
no actually. Should be fairly straightforward though, right?
Yup. With SEUS, just plug the phone in and follow the prompts
found repair option in pc companion but not in seus...but either way nothing helped or worked. It said my phone was up to date on seus and pc companion said, after selecting the repair option, that there was no update for my phone at this time???????????? I am f'd, right?
Hi,
Even pc companion tells you your phone is up to date, continue the install... Repairmode i think
If it doesnt work just can try flashtool... There is a tutorial on xda thread...
I hope it helps..
Sent on Sony Ericsson X10i - feralab v5
if you don't know how.. i'll teach you.. go to pc companion.. and click on support zone, and click on repair phone.. and it will says personal data will be lost, just click continue.. then you choose your phone and follow the instructions.. (you need the latest pc companion for this to work )
HR7 said:
if you don't know how.. i'll teach you.. go to pc companion.. and click on support zone, and click on repair phone.. and it will says personal data will be lost, just click continue.. then you choose your phone and follow the instructions.. (you need the latest pc companion for this to work )
Click to expand...
Click to collapse
9andar said:
Hi,
Even pc companion tells you your phone is up to date, continue the install... Repairmode i think
If it doesnt work just can try flashtool... There is a tutorial on xda thread...
I hope it helps..
Sent on Sony Ericsson X10i - feralab v5
Click to expand...
Click to collapse
I finally fixed it! I had flashed the x10a stock ftf and I needed the x10i ftf even though I have an x10a, I believe that I have to use the x10i ftf now after using x10i roms that must have switched my build.prop. I had done this before but I didn't have the problems reflashing it like I did this time. Thanks for everyone's help!
I had the same Issue and i Used the Flash tool to fix the issue.
People are making the mistake of connecting the phone at the start when they launch pc conpanion.
Sent from my X10i using XDA App
Hello, I have a sonyericsson xperia X10 suddenly stopped turning, i tried to repair it with the FlashTool, the flash process its ok , but at the end of the process and turn it , vibrates only once and not on the lcd (black), and when i reconnect to the PC, the phone is in flash mode again., pls which files or Fw additional need install first for repair?? thks for your time pd i use the fw x10i generic stock and pc companion not repair it display a error in upload the sw to phone.
Please use search tab all is there.Take your time and read.
thks for your time, itried all methods mentioneh in the posts but nothing work, for this reason i need help thks...
I installed a Rom that went wrong and had to use flashmode with sony's update program, not sure how it's called these days. I if you install that and plug it into the pc holding down the Back button, it recognizes it and will all you what you want to do. Select restore (or something similar). It'll restore it back to 2.3.3. After that you can install xRecovery again with flash tool.
Be aware that this worked for my semi bricked X10i, no guarantee it'll work for you ofcourse.......good luck
Sent from my X10S using xda premium
Thks, i tried this for 2 days, but in the Pc companion display the message " no exist software update for your phone", later, put on the phone and noting, only one vibrate and the lcd is permanently black, i put again to usb/pc and display the message SEMC flash.... , pls exist a solution for this issue??? thks
You only get that message when you plug in the phone too early
Update>repair>select x10i>then press continue etc>THEN connect phone.
And run stuff as administrator if you got w7.
Sent from my X10i using xda premium
I tried to repair with pc companion , but adter the finish os the process display ok , but the phone stuck in flash mode all time...
Yoy can try flashing a different kernel.Ive had all sirts of errors and failures,something always works.
Charge battery
Try other flashtool version
Try x10 flasher
sent by my x10i using xda premium
ok i tried this options thks
I tried with diffrent kernels but not working , exist a guide for repair this issue, my x10i its always in flash mode, flash with flash tool and again stays in flash mode
Use SE update service maybe it works for you..
Sent from my X10 using XDA