my photon just wont get unlocked! Rsd keeps giving me an error and the flashing stops and from there i have to remove the battery to restart it. i have the unlocked sbf and the drivers installed on my pc. i have no clue what im doing differently that is stopping my phone from being unlocked.
Rsd shows failure but once Reboot there will be an unlock on the top. By the way. Use the latest no pudding in the development zone and make the motorola drivers are installed correctlly.
Sent from my Motorola Photon using XDA App
RTFF
Refer to LokiFish post everything moto in the dev section.. It can be found here..
http://forum.xda-developers.com/showthread.php?t=1393519
All of the info you need about unlocking can be found in the unlocking methods thread posted..
I suggest before you continue hap-hazardly that you copy and paste posts into a document... Then keep scrolling through the posts in the thread and keep adding important usefull posts to the document.. Having everything clear and concise will help and prevent you from searching in circles trying to get this done..
Good luck and RTFF...
Thanks I'll try right now
another question. does the android sdk need to be installed?
daryl6784 said:
another question. does the android sdk need to be installed?
Click to expand...
Click to collapse
Yes. Try going to YouTube and watching qbking77 video tutorial. It will walk you through...
http://www.youtube.com/watch?v=BwRjFrzClBs&feature=youtube_gdata_player
If you follow qbking77's video for installing CWM later, dont try to root your phone the way he has shown in the video. Ie. By downloading system.rar and flashing it using RSDLite. Use the one click root method or using his method in the video will break your wifi.
daryl6784 said:
my photon just wont get unlocked! Rsd keeps giving me an error and the flashing stops and from there i have to remove the battery to restart it. i have the unlocked sbf and the drivers installed on my pc. i have no clue what im doing differently that is stopping my phone from being unlocked.
Click to expand...
Click to collapse
Same thing happened to me and as somebody else has stated, it's normal. As long as you get the "Unlocked" message in the top left, you're good to go.
now for some reason my command prompt is giving me moto-fastboot is not recognized as an internal or external command. yes i have the sdk installed
You have to open the command prompt from the directory that fastboot.exe is in, if you are running windows 7 you can shift + right click the folder and you will have an option to "open command window here"
daryl6784 said:
now for some reason my command prompt is giving me moto-fastboot is not recognized as an internal or external command. yes i have the sdk installed
Click to expand...
Click to collapse
Are you using my root-unlock-relock pack? If so did you extract it to C:\ ?
yes i extracted it to C
annnnddd i got it! thank you guys. i figured the problem was with the file name where the video says put moto-fastboot i needed just fastboot lol simplle mistake
daryl6784 said:
now for some reason my command prompt is giving me moto-fastboot is not recognized as an internal or external command. yes i have the sdk installed
Click to expand...
Click to collapse
did you try "cd" before pointing to the location?
Related
I am looking for update my ATT dell Streak with O2 2.1 on it to DjSteve Rom but i am not been able to do anything using MAC ?
can someone please help me how can i make it happen using mac
You can do all the steps list on the Mac without issue.
1) Install the Android SDK and make sure it is in your system path so the commands will be recognized.
2) Follow the rest of the steps, but when using fastboot make sure to use the PC commands, not the Mac (Mac commands did not work for me)
If you give me specifics of where you are I may be able to help
you dont need to download the SDK, just grab the fastboot files
Not Android Development you could have asked the question in steves thread and not created a new thread
lufc said:
Not Android Development you could have asked the question in steves thread and not created a new thread
Click to expand...
Click to collapse
Well i did asked this question there since its the common sense but when i did not got any reply that is when decided to post a new thread
Alright so i was able to download the fastboot file for mac and put it on desktop but when i am entering fastboot command it is giving me an error fastboot command not found ?
" -bash: fastboot: command not found "
what the hell does that means ?
http://www.streaksmart.com/2010/11/how-to-get-official-android-22-update-on-dell-streak.html
this is guide i am trying to follow
are you doing "fastboot" or "./fastboot"?
paincorp said:
are you doing "fastboot" or "./fastboot"?
Click to expand...
Click to collapse
I am doing "fastboot"
vikramdhani said:
I am doing "fastboot"
Click to expand...
Click to collapse
try ./fastboot followed by the rest of the command
i have a .21 prime i used the unlock tool but i can seem to figure out how to flash CWM to get a rooted rom. i tried abd from the cmd on my win7 pc, and tried fastboot, even terminal emulator. i must be doing something wrong. can someone help with a step by step how to kinda confused by most of the instructions to use adb or fastboot. and i see comands for both starting with a # but all i see is a $ when i use them?
ogrekane313 said:
i have a .21 prime i used the unlock tool but i can seem to figure out how to flash CWM to get a rooted rom. i tried abd from the cmd on my win7 pc, and tried fastboot, even terminal emulator. i must be doing something wrong. can someone help with a step by step how to kinda confused by most of the instructions to use adb or fastboot. and i see comands for both starting with a # but all i see is a $ when i use them?
Click to expand...
Click to collapse
I think you might be confusing the different methods of flashing CWM (i.e., Rooted or non-rooted). ADB, as I understand it, can only be used for rooted devices. Provided you already unlucked the bootloader, you need to use the fastboot method to flash your recovery.
The problem with a lot of the tutorials out there, is they were written with a rooted device in mind. Since .21 became the norm, and root is off the table (for now), some of the guides don't clearly indicate the steps you have to take.
Take a look at this site. He's got a few videos and step by step tutorials to help you out.
http: // transformerprimeroot(dot)com / transformer-prime-recovery/how-to-install-clockworkmod-recovery-5-8-2-0-on-transformer-prime
Just work on getting fastboot running, and you should have an easy time from there.....good luck!
awesome but how to get fastboot to work the guide i saw said extract zip and put the cwm file where you extracyed zip. then said open command line and navigate to folder where i extracted fastboot zip using "cd". then tells me to enter command line. lol ok whats cd and how do i navigate? thanks man
Sent from my DROID RAZR using Tapatalk 2
ogrekane313 said:
awesome but how to get fastboot to work the guide i saw said extract zip and put the cwm file where you extracyed zip. then said open command line and navigate to folder where i extracted fastboot zip using "cd". then tells me to enter command line. lol ok whats cd and how do i navigate? thanks man
Sent from my DROID RAZR using Tapatalk 2
Click to expand...
Click to collapse
Cd is a dos command in the example. In windows you type cmd to get to command prompt mac I have no idea
ok how do i navigate to the folder that i extracted fastboot in
Sent from my DROID RAZR using Tapatalk 2
Use windows explorer to navigate to the folder. Highlight the folder, hold shift and right click. Then select open command prompt
Sent from my SGH-T959 using Tapatalk 2
omg thats just what i needed i now have cwm thank you so so so much
Sent from my DROID RAZR using Tapatalk 2
Very welcome. Feels good finally being able to help someone
Sent from my SGH-T959 using Tapatalk 2
After installing CWM, will this allow us to install a custom rooted rom?
ogrekane313 said:
awesome but how to get fastboot to work the guide i saw said extract zip and put the cwm file where you extracyed zip. then said open command line and navigate to folder where i extracted fastboot zip using "cd". then tells me to enter command line. lol ok whats cd and how do i navigate? thanks man
Sent from my DROID RAZR using Tapatalk 2
Click to expand...
Click to collapse
Solutions for stuff like that can be fixed by reading Wikipedia (unix and dos commands), an appropriate book for the operating system, or Googling. Too few non-developers (and shamefully to many developers now're days) sometimes are aware of how more than clicky-clicky works but we all have to learn sometime.
I once spent like 3 weeks with a FreeBSD system after not touching the command prompt since "Insert floppy, type this and press enter to run game" days and got very proficient.
Heloo !
i use this guide http://forum.xda-developers.com/showthread.php?t=1302423
and when i get to 12. when i need to open cmd and write C:\users\YOURNAME\desktop\motounlock press 'enter'
its says to me " .. is not recognized as an intenal or external command, operable progrem or hacth file.
should i stop ? or continuo ?
iAtrix 4g said:
Heloo !
i use this guide http://forum.xda-developers.com/showthread.php?t=1302423
and when i get to 12. when i need to open cmd and write C:\users\YOURNAME\desktop\motounlock press 'enter'
its says to me " .. is not recognized as an intenal or external command, operable progrem or hacth file.
should i stop ? or continuo ?
Click to expand...
Click to collapse
you should "cd.." to top level, C:\, the "cd C:\users\...\motounlock"
Once the Command prompt changes to show you are in the motounlock directory...
Try "fastboot devices"
to see if your device is being seen. If is is not keep playing with the steps and give it time.
LightFighter_sc said:
you should "cd.." to top level, C:\, the "cd C:\users\...\motounlock"
Once the Command prompt changes to show you are in the motounlock directory...
Try "fastboot devices"
to see if your device is being seen. If is is not keep playing with the steps and give it time.
Click to expand...
Click to collapse
thank you it work !~
now in the Proper Recovery: step
before all i need to power on the phone within i press volume down and after that plugg in the phone ?
Yes, now boot phone with volume down key pressed until you see "Fastboot", the click up volume to start fastboot mode. Then connect devices and give it a few seconds to connect. To check that it is connected and your computer is seeing the device: "moto-fastboot.exe devices". This will show something like "Ty987907", then you know it is properly connected and you can continue to work through the steps.
LightFighter_sc said:
Yes, now boot phone with volume down key pressed until you see "Fastboot", the click up volume to start fastboot mode. Then connect devices and give it a few seconds to connect. To check that it is connected and your computer is seeing the device: "moto-fastboot.exe devices". This will show something like "Ty987907", then you know it is properly connected and you can continue to work through the steps.
Click to expand...
Click to collapse
i did it but when i connecte it to the computer its says stromgr Formattinng SOS ?
wrf is that ?
iAtrix 4g said:
i did it but when i connecte it to the computer its says stromgr Formattinng SOS ?
wrf is that ?
Click to expand...
Click to collapse
That message is on the phone or on the computer? I honestly didn't pay too much attention to what what showing on the phone screen at this point, I just followed the commands listed in the post.
LightFighter_sc said:
That message is on the phone or on the computer? I honestly didn't pay too much attention to what what showing on the phone screen at this point, I just followed the commands listed in the post.
Click to expand...
Click to collapse
nevermind i do it ! its good..
thank you for answering so fast ! u help me alot !
now i just need to install new rom..
i thought about mrom, because i need strong battary.
what u suggest ?
Glad I could help.
I'm using epinter's CM10 ROM. Battery life is good, at least as good as stock if not a little better. However, camera and video are not very good in CM9 and CM10 ROM's. This is not a problem for me. If you want fully working hardware stick with CM7 ROM's. As far as which CM7 ROM is best, I have no idea.
LightFighter_sc said:
Glad I could help.
I'm using epinter's CM10 ROM. Battery life is good, at least as good as stock if not a little better. However, camera and video are not very good in CM9 and CM10 ROM's. This is not a problem for me. If you want fully working hardware stick with CM7 ROM's. As far as which CM7 ROM is best, I have no idea.
Click to expand...
Click to collapse
one last question..
in the part
DO NOT FORGET TO DO THIS PART: After the install of RomRacers recovery boot up your phone. Open up your favourite file browser (I used Astro file manager to do this ) and navigate to /system/etc/ and delete the file called 'install-recovery.sh'
i installed Astro, how can i get to /system/etc/? i cant find it
iAtrix 4g said:
one last question..
in the part
DO NOT FORGET TO DO THIS PART: After the install of RomRacers recovery boot up your phone. Open up your favourite file browser (I used Astro file manager to do this ) and navigate to /system/etc/ and delete the file called 'install-recovery.sh'
i installed Astro, how can i get to /system/etc/? i cant find it
Click to expand...
Click to collapse
I'm not sure about Astro, I use ES filemanager and I had to go into settings to turn on Root browsing. Try navigating "up" to the root "/", then you will see the 'system' folder.
LightFighter_sc said:
I'm not sure about Astro, I use ES filemanager and I had to go into settings to turn on Root browsing. Try navigating "up" to the root "/", then you will see the 'system' folder.
Click to expand...
Click to collapse
i dont know way but i dont find it
iAtrix 4g said:
i dont know way but i dont find it
Click to expand...
Click to collapse
Keep hitting the "up" arrow until only the phone icon is showing (no storage locations). You should see: acct, cache, config... just scroll down until you find "system" (not "sys"). You may need to go to setting to "show hidden files" as well.
LightFighter_sc said:
Keep hitting the "up" arrow until only the phone icon is showing (no storage locations). You should see: acct, cache, config... just scroll down until you find "system" (not "sys"). You may need to go to setting to "show hidden files" as well.
Click to expand...
Click to collapse
When i do the up arrow its goes out from the appliaction
iAtrix 4g said:
When i do the up arrow its goes out from the appliaction
Click to expand...
Click to collapse
You may have to uninstall/reinstall for it to pick up the root permissions, or try another file manager to will work with root.
LightFighter_sc said:
You may have to uninstall/reinstall for it to pick up the root permissions, or try another file manager to will work with root.
Click to expand...
Click to collapse
i need to do root for it ?
i just unlocked the bootloader and install Proper Recovery:
iAtrix 4g said:
i need to do root for it ?
i just unlocked the bootloader and install Proper Recovery:
Click to expand...
Click to collapse
Without having root, you can't get to system files, so you won't be able to delete the file. I don't know what effect that will have, probably nothing to worry about. Not sure how you could flash a ROM without already having rooted your phone... but I am no expert. No reason not to root you phone at this point you've voided any warranty by unlocking the bootloader.
LightFighter_sc said:
Without having root, you can't get to system files, so you won't be able to delete the file. I don't know what effect that will have, probably nothing to worry about. Not sure how you could flash a ROM without already having rooted your phone... but I am no expert. No reason not to root you phone at this point you've voided any warranty by unlocking the bootloader.
Click to expand...
Click to collapse
i dont have warrntey.. you said that i must rooted my phone to chenged costmos roms ?
To the best of my knowledge you need root to install a custom ROM. But, I am not an expert, or even very experienced. Personally, I would rather take the extra step to root prior to installing a new ROM rather than skip the step and wind up with a mess, or worse, a bricked phone. Until I know better I'm going to follow other's instructions, not adding, not subtracting. Seems the most likely way to be successful.
LightFighter_sc said:
To the best of my knowledge you need root to install a custom ROM. But, I am not an expert, or even very experienced. Personally, I would rather take the extra step to root prior to installing a new ROM rather than skip the step and wind up with a mess, or worse, a bricked phone. Until I know better I'm going to follow other's instructions, not adding, not subtracting. Seems the most likely way to be successful.
Click to expand...
Click to collapse
ok i will root my phone do u heve any guide that can help me ? (if its help im android 2.3.4 French version, and unlock bootloader)
thank you dude for everything u are the best !!!!!!!!
iAtrix 4g said:
ok i will root my phone do u heve any guide that can help me ? (if its help im android 2.3.4 French version, and unlock bootloader)
thank you dude for everything u are the best !!!!!!!!
Click to expand...
Click to collapse
The thread you found the bootloader unlock instructions starts out with rooting instructions. Tayshun12 starts off by saying he has GB 2.3.4 installed, so this method should work for you. I started with a US AT&T phone with 2.36, so I used a slightly different method. When in doubt, Google is your best friend
Hello everyone,
I have been searching in vain for a while now to find a solution to my problem and I fear that I may have done something daft to my phone.
I am using a HTC One X+ that was unlocked, s-off and rooted for about a year, i had TWRP and stock android 4.1.1. For ages I have been getting an update alert saying a software update is ready and i think it was some Vodafone update (1.17.161.7). Whenever i accepted and tried to install this it would obviously reboot into TWRP and then the update would fail. This was fine until last night when I decided to install it through TWRP, it said it failed again and i rebooted to find that WiFi wouldnt turn on, my phone was no longer rooted or s-off and that I get no signal. I tried to re-root it but command prompt on the computer or HTC Sync wouldnt recognise my device however it was appearing as HTC One X+ in My Computer and i could access the internal storage.
I restarted into recovery and managed to flash a new root using twrp and the root file using the unlockr.com - how to root the htc one x
Then thinking it was a ROM issue i downloaded and installed InsertCoin Evolution ONE X+ 5.0-6 Sense 5 Android 4.2.2.
This all went through ok however when i reboot from this install it just sticks at the HTC Quietly Brilliant screen. I wiped everything using twrp beforehand.
When i restart into bootloader, it says unlocked, S-On and HBOOT -1.30.0000
Not sure what else to do as now i have no ROM, i read that you have to partition the SD card for InsertCoin to work but the option to partition SD card isnt there in my TWRP (ver. 2.3.3.0)
Any help to even reset my phone back to basic stock everything would be amazing, i have a Titanium Backup of most of my stuff saved btw.
Thanks to anyone who can help.
Did you flash the insert coin boot.img?
Sent from my HTC One X+ using Tapatalk
AndroHero said:
Did you flash the insert coin boot.img?
Sent from my HTC One X+ using Tapatalk
Click to expand...
Click to collapse
No I just copied the whole zip file to the SD card section and installed it from there - ive encountered a new problem now in the fact that my computer no longer can recognise the phone via USB - it still appears in device manager but cant access the sd card and the sd card got wiped by twrp so now i dont have any way of getting things onto the phone that i know of. It just says - failed to open usb master mode in the bootloader. How could i get the computer to recognise the phone again so i can transfer it back onto it and try installing insertcoin again? Really hoping i havent managed to make my phone useless as ive had to dig out the old Nokia 6230 from the drawer haha!
Thanks.
EDIT - Now seen the instruction to flash the boot.img - what a fool i am. Now i need to get it recognised by USB again so i can transfer the zip file to it and go again.
maxwell689 said:
No I just copied the whole zip file to the SD card section and installed it from there - ive encountered a new problem now in the fact that my computer no longer can recognise the phone via USB - it still appears in device manager but cant access the sd card and the sd card got wiped by twrp so now i dont have any way of getting things onto the phone that i know of. It just says - failed to open usb master mode in the bootloader. How could i get the computer to recognise the phone again so i can transfer it back onto it and try installing insertcoin again? Really hoping i havent managed to make my phone useless as ive had to dig out the old Nokia 6230 from the drawer haha!
Thanks.
Click to expand...
Click to collapse
Now seen the instruction to flash the boot.img - what a fool i am. All I need now is to get it recognised by USB again so i can transfer the zip file back and go again.
maxwell689 said:
Now seen the instruction to flash the boot.img - what a fool i am. All I need now is to get it recognised by USB again so i can transfer the zip file back and go again.
Click to expand...
Click to collapse
Without a rom installed you're not able to acces the internal memory of your phone directly. You have to use "adb sideload" command to transfer a rom onto your phone. Look in the General and/or Q&A forum of this device, there are enough guides or topics on how to solve this "problem".
maxwell689 said:
Now seen the instruction to flash the boot.img - what a fool i am. All I need now is to get it recognised by USB again so i can transfer the zip file back and go again.
Click to expand...
Click to collapse
Hi use this link..may be useful (http://forum.xda-developers.com/showthread.php?t=2066390) by the way reaper90 is right you need to sideload the rom..
In TWRP:
1-wipe everything
2-goto advance in twrp
3-select sideload
4-navigate to the folder where you have adb.exe, adbwinapi.dll, adbwinusbapi.dll and fastboot.exe. and make sure to keep the rom and its image; bootimg there.
5-then in command prompt write (adb sideload *name of the rom*.zip) make sure the name is a letter.
6- also make sure to keep the screen alive and not let it goto sleep while adb sideload is working.
7- rom will start setup once sideload is 100%.
Hope this helps. Goodluck.
Optimus said:
Hi use this link..may be useful (http://forum.xda-developers.com/showthread.php?t=2066390) by the way reaper90 is right you need to sideload the rom..
In TWRP:
1-wipe everything
2-goto advance in twrp
3-select sideload
4-navigate to the folder where you have adb.exe, adbwinapi.dll, adbwinusbapi.dll and fastboot.exe. and make sure to keep the rom and its image; bootimg there.
5-then in command prompt write (adb sideload *name of the rom*.zip) make sure the name is a letter.
6- also make sure to keep the screen alive and not let it goto sleep while adb sideload is working.
7- rom will start setup once sideload is 100%.
Hope this helps. Goodluck.
Click to expand...
Click to collapse
Hi, thanks very much for the responses - its much appreciated.
Nothing happens when i type that command, a load of text appears in cmd prompt showing all the adb commands and thats it, i have searched for this problem and found this on twrp website as a possible solution "You will need version 1.0.29 or higher. You can find your current version by typing "adb version" at the command line" My version says 1.0.26 I have tried to update this but cant seem to find a way to do it, would that be an issue?
I think once ive managed to sideload the zip i should be good to go its just getting to that point that seems to be stumping me at the moment.
maxwell689 said:
Hi, thanks very much for the responses - its much appreciated.
Nothing happens when i type that command, a load of text appears in cmd prompt showing all the adb commands and thats it, i have searched for this problem and found this on twrp website as a possible solution "You will need version 1.0.29 or higher. You can find your current version by typing "adb version" at the command line" My version says 1.0.26 I have tried to update this but cant seem to find a way to do it, would that be an issue?
I think once ive managed to sideload the zip i should be good to go its just getting to that point that seems to be stumping me at the moment.
Click to expand...
Click to collapse
Dont sweat it. They understood you wrong.
Guys what he wants to do is copy the file FROM the SDCARD TO the PC.
First you will need to know where the location of your rom then type in the following commands:
Code:
adb devices
If you device is not detected then try to run the CMD as an administrator and try again
then:
Code:
adb pull {location without the curly brackets}
For example if its on the SDCard then:
Code:
adb pull /sdcard/rom.zip
It will paste the file to the folder where the adb is found
Then just open the zip file and get out the boot.img and flash it using fastboot
Hope this helps you out.
Ghand0ur said:
Dont sweat it. They understood you wrong.
Guys what he wants to do is copy the file FROM the SDCARD TO the PC.
First you will need to know where the location of your rom then type in the following commands:
Code:
adb devices
If you device is not detected then try to run the CMD as an administrator and try again
then:
Code:
adb pull {location without the curly brackets}
For example if its on the SDCard then:
Code:
adb pull /sdcard/rom.zip
It will paste the file to the folder where the adb is found
Then just open the zip file and get out the boot.img and flash it using fastboot
Hope this helps you out.
Click to expand...
Click to collapse
Hey, thanks.
No they got me correctly, there is absolutely nothing on my phone at all and I need to get my new ROM zip file from the PC to the phone so that I can install it. I am currently downloading SDK manager to try and update my adb to 1.0.29 or higher and will see if that works.
maxwell689 said:
Hey, thanks.
No they got me correctly, there is absolutely nothing on my phone at all and I need to get my new ROM zip file from the PC to the phone so that I can install it. I am currently downloading SDK manager to try and update my adb to 1.0.29 or higher and will see if that works.
Click to expand...
Click to collapse
Ok, i downloaded the hasoon toolkit and select ADB Sideload a ROM and it says "error device not found" in the command prompt. I am in ADB Sideload mode in TWRP with it plugged in via USB so dont know what to try next.
maxwell689 said:
Ok, i downloaded the hasoon toolkit and select ADB Sideload a ROM and it says "error device not found" in the command prompt. I am in ADB Sideload mode in TWRP with it plugged in via USB so dont know what to try next.
Click to expand...
Click to collapse
Lol.. Well, as i said try to run the Toolkit/cmd as administrator and try different usb ports.. It took me 5 minutes on windows 8 for the adb to properly read the device , had to try different usb ports, unplug , replug, and so on..
maxwell689 said:
Ok, i downloaded the hasoon toolkit and select ADB Sideload a ROM and it says "error device not found" in the command prompt. I am in ADB Sideload mode in TWRP with it plugged in via USB so dont know what to try next.
Click to expand...
Click to collapse
Hi goto htcdev n download the latest sdk
Sent from my HTC One X+ using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
I will try to send I over the files for command prompt tomorrow.
Sent from my HTC One X+ using xda app-developers app
Optimus said:
Hi goto htcdev n download the latest sdk
Sent from my HTC One X+ using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
I will try to send I over the files for command prompt tomorrow.
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
Right ive manged to download the latest sdk and then after much unplugging and plugging and right clicking things in device manager its recognised my phone enough to sideload and install the ROM. I have also managed to fastboot the boot.img file as well after 3 attempts but it finally worked so i have a phone back again!! Thanks everyone here!!! Now to upload my titanium backup of apps, sadly i think ive lost all my photos thou
But thanks again to all. Sorry if ive been a bit noob but its been a good learning curve for me as i never had these issues with my HTC desire
maxwell689 said:
Right ive manged to download the latest sdk and then after much unplugging and plugging and right clicking things in device manager its recognised my phone enough to sideload and install the ROM. I have also managed to fastboot the boot.img file as well after 3 attempts but it finally worked so i have a phone back again!! Thanks everyone here!!! Now to upload my titanium backup of apps, sadly i think ive lost all my photos thou
But thanks again to all. Sorry if ive been a bit noob but its been a good learning curve for me as i never had these issues with my HTC desire
Click to expand...
Click to collapse
Thats great news that all is well now..feel free to post.. and dont forget to press the Thanks button
solved mods delete this as idk how
why don't you share with the rest of us what you on how you did it, instead of deleting your thread.
flashhsalf said:
why don't you share with the rest of us what you on how you did it, instead of deleting your thread.
Click to expand...
Click to collapse
Follow this guide > http://forum.xda-developers.com/showpost.php?p=52170480&postcount=2
before the mods del,ete this, i wanna ask a relative question. I've gotten adb to recognise my dna on my computer, and i can use adb commands, but when I get to fastboot to flash the new firmware, i get a (waiting for device) message where nothing happens. where did i go wrong?
champdr0id said:
before the mods del,ete this, i wanna ask a relative question. I've gotten adb to recognise my dna on my computer, and i can use adb commands, but when I get to fastboot to flash the new firmware, i get a (waiting for device) message where nothing happens. where did i go wrong?
Click to expand...
Click to collapse
In your adb folder press shift + right click and open the command prompt window from there and try that. Try a different USB port?
HTC DNA
Saw and tried both with no better results. I ended up using the recovery flashable zip in santod's closed thread without any problems. I know it's not the full RUU, but whatevs for now. Thanks though!
Beanstalk holds a special place in my heart.