Hello,
I didn't see any method to gain root privilege on stock firmware without SDE other than archangel. So here another one. Tested on a tablet A101IT.
zergRush exploit work on archos in particular condition.
You have to download the archive here : https://github.com/downloads/revolutionary/zergRush/zergRush.zip
Extract zergRush binary from archive and put it on your archos :
Code:
adb push zergRush /data/local/zergRush
Exploit work only in the following condition, the device must be restarted and immediately when adb is available exploit should be launched. This can be achieved like this :
Code:
adb reboot && adb wait-for-device && adb shell "/data/local/zergRush"
... and you should see
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a Froyo ! 0x00000108
[*] Scooting ...
[*] Sending 149 zerglings ...
[+] Zerglings found a way to enter ! 0x10
[+] Overseer found a path ! 0x0001c4d0
[*] Sending 149 zerglings ...
[+] Zerglings caused crash (good news): 0x40119ce4 0x006c
[*] Researching Metabolic Boost ...
[+] Speedlings on the go ! 0xafd15b27 0xafd1af4b
[*] Sending 149 zerglings ...
[+] Rush did it ! It's a GG, man !
[+] Killing ADB and restarting as root... enjoy!
Since SDE was released, there is no big interest to gain a temporary root ... it's just for information
EDIT:
Tested on A101IT without SDE installed and on 2.4.81 firmware
Related
I sbfed the leaked 2.3.4 onto my dx2 and i'm trying to root it with no luck. i have tried zergrush, pete's, motorolaoneclick, etc. USB debbuging is on. Charge only mode is selected when connected to computer. I have tried them all and i am not getting root access can someone help?
With Pete's root method i recieve this message: http: //prntscr.com/7efen
With Zergrush's root method i get this: http: //prntscr.com/7efg8
With Motorolaoneclickroot i get this: http: //prntscr.com/7efis but i obviously dont have root.
System Version
1.3.380.MB870.Verizon.en.US
Android Version
2.3.4
Baseband Version
n_03.13.28s
Kernel Version
[email protected] #2
Build Number
4.5.1A-DTN-150-30
Reboot yo pc. Make sure no other "phone program" is running like rsd etc. Reinstall drivers.
Petes one click is the one I use.
skwoodwiva said:
Reboot yo pc. Make sure no other "phone program" is running like rsd etc. Reinstall drivers.
Petes one click is the one I use.
Click to expand...
Click to collapse
i did as you said and still nothing ! i know it can be done because i've done it before i just dont remember how
optimusprimeuy,
You need USB debbuging & Unknown Sources checked
and just follow Moon Shadow's tut.
http://forum.xda-developers.com/showthread.php?t=1315711
I'm running into these same issues. I've tried three different rooting method. DoomLord, Petes and the one-click. Nothing seems to working. I've installed the ADB drivers, rebooted, repaired the drivers. debugging and unknown sources is checked. I've tried on my desktop and laptop computer. Nothing seems to work.
This is a DX2
System version = 1.3.418.MB870
Adroid Version = 2.3.5 (is this the issue?)
Let me know if anyone can help, thanks in advance!
ImgBurn said:
optimusprimeuy,
You need USB debbuging & Unknown Sources checked
and just follow Moon Shadow's tut.
http://forum.xda-developers.com/showthread.php?t=1315711
Click to expand...
Click to collapse
use magic md5 method
magic md5 root for d2, d2g, dx, & dx2
Sent from my XT862 using Tapatalk 2
Rooting Droid X2
optimusprimeuya said:
I sbfed the leaked 2.3.4 onto my dx2 and i'm trying to root it with no luck. i have tried zergrush, pete's, motorolaoneclick, etc. USB debbuging is on. Charge only mode is selected when connected to computer. I have tried them all and i am not getting root access can someone help?
With Pete's root method i recieve this message: http: //prntscr.com/7efen
With Zergrush's root method i get this: http: //prntscr.com/7efg8
With Motorolaoneclickroot i get this: http: //prntscr.com/7efis but i obviously dont have root.
System Version
1.3.380.MB870.Verizon.en.US
Android Version
2.3.4
Baseband Version
n_03.13.28s
Kernel Version
[email protected] #2
Build Number
4.5.1A-DTN-150-30
Click to expand...
Click to collapse
I just rooted my Droid X2 by following Moon Shadows Root Tutorial with good results. My Droid is exactly as yours is above.
I copied the command window from the process and it is below, I hope it may be helpfull. Magic MD5 method did not work.
---------------------------------------------------------------
Easy rooting toolkit (v4.0)
created by DooMLoRD
using exploit zergRush (Revolutionary Team)
Credits go to all those involved in making this possible!
---------------------------------------------------------------
[*] This script will:
(1) root ur device using latest zergRush exploit (21 Nov)
(2) install Busybox (1.18.4)
(3) install SU files (binary: 3.0.3 and apk: 3.0.6)
(4) some checks for free space, tmp directory
(will remove Google Maps if required)
[*] Before u begin:
(1) make sure u have installed adb drivers for ur device
(2) enable "USB DEBUGGING"
from (Menu\Settings\Applications\Development)
(3) enable "UNKNOWN SOURCES"
from (Menu\Settings\Applications)
(4) [OPTIONAL] increase screen timeout to 10 minutes
(5) connect USB cable to PHONE and then connect to PC
(6) skip "PC Companion Software" prompt on device
---------------------------------------------------------------
CONFIRM ALL THE ABOVE THEN
Press any key to continue . . .
--- STARTING ----
--- WAITING FOR DEVICE
* daemon not running. starting it now *
* daemon started successfully *
--- creating temporary directory
mkdir failed for tmp, File exists
--- cleaning
--- pushing zergRush
1441 KB/s (23060 bytes in 0.015s)
--- correcting permissions
--- executing zergRush
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00000118
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[+] Zerglings found a way to enter ! 0x18
[+] Overseer found a path ! 0x000151e0
[*] Sending 189 zerglings ...
[+] Zerglings caused crash (good news): 0x4011ccd4 0x0074
[*] Researching Metabolic Boost ...
[+] Speedlings on the go ! 0xafd1965b 0xafd3949f
[*] Sending 181 zerglings ...
[+] Rush did it ! It's a GG, man !
[+] Killing ADB and restarting as root... enjoy!
--- WAITING FOR DEVICE TO RECONNECT
if it gets stuck over here for a long time then try:
disconnect usb cable and reconnect it
toggle "USB DEBUGGING" (first disable it then enable it)
--- DEVICE FOUND
--- pushing busybox
946 KB/s (1075144 bytes in 1.109s)
--- correcting permissions
--- remounting /system
--- checking free space on /system
0 KB/s (439 bytes in 1.000s)
--- Free space on /system : 67% bytes
test: 67%: bad number
--- NOT enough free space on /system!!!
--- making free space by removing Google Maps
--- copying busybox to /system/xbin/
2099+1 records in
2099+1 records out
1075144 bytes transferred in 0.080 secs (13439300 bytes/sec)
--- correcting ownership
--- correcting permissions
--- installing busybox
--- pushing SU binary
1389 KB/s (22228 bytes in 0.015s)
--- correcting ownership
--- correcting permissions
--- correcting symlinks
--- pushing Superuser app
1197 KB/s (785801 bytes in 0.640s)
--- cleaning
--- rebooting
ALL DONE!!!
Press any key to continue . . .
several ways to root 2.3.4
the problem with zergrush is it removes apps like maps, so you cannot update to 2.3.5
magic md5 root was made for 2.3.5, but it will work for 2.3.4, just not the fastest option
Sent from my XT862 using Tapatalk 2
Ok, so I started off with a US 3.2 tablet with 2.6.36.3 with [email protected] #1, then flashed the official US 3.2.1R2 (signed-nbx03_001-ota-042.001.zip), which resulted in having the kernel at 5.
After running condi's tool, I was able to root. Now I am trying to follow condi's steps and upgrade to pre-rooted ICS by decrypting signed-nbx03_001-ota-12041004.zip, however at the boot to recovery mode step, it shows error:
"1 was unexpected at this time"
and self closes.
Any ideas on what what might be causing this? I'm using condi's latest version 4.1. Forgive me if this is an obvious error on my part.
I would post a screenshot but its not letting me.
Thanks
same case at AIO4.1
I'm not sure it's problem or not, so stopped to proceed.
any idea?
---------- Post added at 09:55 PM ---------- Previous post was at 09:41 PM ----------
host os:win xp sp3
android ver:3.2.1-r2 (THMAS0232400)
update firm: signed-nbx03_023-ota-120427050.zip (Japan)
etc: already rooted
log is shown in below.
Code:
[*]*****************************************************************[*]
[*] Sony Tablet S / Create decrypted update.zip [*]
[*] [+optional add root and "rescue-backdoor" built-in]. [*]
[*]*****************************************************************[*]
(..snip..)
[*]*****************************************************************[*]
[*] EXTERNAL SD is required - min. 1GB! [*]
[*]*****************************************************************[*]
Instructions:
1. Put your device in USB debugging mode. ROOT IS REQUIRED.
2. Attach it via USB
3. Run this script.
[*] Run device in normal boot.
[*] Press enter to begin...
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Checking device region...
202 KB/s (0 bytes in 6476.000s)
7-Zip (A) 9.20 Copyright (c) 1999-2010 Igor Pavlov 2010-11-18
Processing archive: backups\region.zip
Extracting region\region.prop
Everything is Ok
Size: 692
Compressed: 6476
1 file(s) copied.
43 KB/s (0 bytes in 692.000s)
[*] Region is OK...
[*] HACK zip is already prepared, but not on SD
[*] Pushing _hack_recovery.zip...
1295 KB/s (0 bytes in 15155925.011s)
[*] DONE. Its saved in '/sdcard/_hack_recovery.zip' for future use.
[*]**************************************************************[*]
[*] DEVICE POWERED OFF. [*]
[*]**************************************************************[*]
[*] NOW ENTER RECOVERY MODE = hold vol-up, and push power [*]
[COLOR="Red"]1 was unexpected at this time.[/COLOR]
C:\S.onyTablet.S [ALLinONE] v4.1>
hi guys,
thanks for reporting
dl attached file, unpack it and replace in /files/ directory.
please post results!
br
condi
hi condi,
That works! Thx!!
Then I proceeded to the last, almost all no problem.
But I confused in last phase because something like an error happend. (mentioned below in red)
Is it no problem?
Code:
[*]**************************************************************[*]
[*] DEVICE POWERED OFF. [*]
[*]**************************************************************[*]
[*] NOW ENTER RECOVERY MODE = hold vol-up, and push power [*]
[*] Go to update, and choose "install.zip" [*]
[*]**************************************************************[*]
[*] ...
[*]******************[*]
[*] Shell enabled! [*]
[*]******************[*]
[*] Please wait...
[COLOR="Red"]mv: can't rename '/sdcard/custom_update_signed.zip': No such file or directory
cannot create /sbin/recovery: text busy
[/COLOR]
[*]**************************[*]
[*] Flashing custom zip... [*]
[*]**************************[*]
[*] After all done - remember to DELETE /sdcard/install.zip file (your update)
or just RENAME it back to 'custom_update_signed.zip' for example ;)
[*] Press any key to exit.
after all, in that phase, I flashed install.zip at first. then, flashed custom_update_signed.zip.
Is it correct? (I'm not sure but it seems work fine ics.)
Thanks,
Thanks for the reply condi. After replacing the file I am seeing the same result as coosee when I proceed to autoflash, however, when if I skip autoflash and flash manually (custom rom menu #4 manual) the ics update was successful and I verified that I maintained root.
Thanks again!
Code:
Everything is Ok
Size: 399
Compressed: 5670
1 file(s) copied.
17 KB/s (399 bytes in 0.022s)
[*] Region is OK...
[*] HACK zip is already prepared, but not on SD
[*] Pushing _hack_recovery.zip...
1317 KB/s (18868490 bytes in 13.982s)
[*] DONE. Its saved in '/sdcard/_hack_recovery.zip' for future use.
[*]**************************************************************[*]
[*] DEVICE POWERED OFF. [*]
[*]**************************************************************[*]
[*] NOW ENTER RECOVERY MODE = hold vol-up, and push power [*]
[*] Go to update, and choose "install.zip" [*]
[*]**************************************************************[*]
[*] ...
[*]******************[*]
[*] Shell enabled! [*]
[*]******************[*]
[*] Please wait...
cannot create /sbin/recovery: text busy
[*] DONE. Now you can flash custom update.zip!!!
Choose the signed file from recovery :)
[*] Press any key to exit.
I got the January 7th OTA update. I lost root. I do have Voodoo OTA root keeper, and it said root restored but it didn't check the box. I also have SuperUser but I keep getting the # sign in the status bar to update su bin. When I try to update it gives me an error message. I tried to use a few root dependent apps to test if root was truly gone, and, indeed, it was.
I gave up and decided I should just try to reroot. So I ran Razrblade Utility that I used to root jellybean in the first place, and not even that works. I have safestrap if that means anything. Any ideas?
Here is the dialogue box I get when I try to run Razr Blade
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Phase one...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
55 KB/s (3477 bytes in 0.061s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
472 KB/s (91992 bytes in 0.190s)
1211 KB/s (1867568 bytes in 1.505s)
1259 KB/s (574184 bytes in 0.445s)
878 KB/s (63838 bytes in 0.071s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Terminate batch job (Y/N)?
Me too
thrax12 said:
I got the January 7th OTA update. I lost root. I do have Voodoo OTA root keeper, and it said root restored but it didn't check the box. I also have SuperUser but I keep getting the # sign in the status bar to update su bin. When I try to update it gives me an error message. I tried to use a few root dependent apps to test if root was truly gone, and, indeed, it was.
I gave up and decided I should just try to reroot. So I ran Razrblade Utility that I used to root jellybean in the first place, and not even that works. I have safestrap if that means anything. Any ideas?
Here is the dialogue box I get when I try to run Razr Blade
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Phase one...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
55 KB/s (3477 bytes in 0.061s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
472 KB/s (91992 bytes in 0.190s)
1211 KB/s (1867568 bytes in 1.505s)
1259 KB/s (574184 bytes in 0.445s)
878 KB/s (63838 bytes in 0.071s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Terminate batch job (Y/N)?
Click to expand...
Click to collapse
I had the same problem. However after clearing the cache I was able to regain root.
1.Power the device off.
Note Press the Power button then select Power off.
Note If the device doesn't respond to input, press and hold the Volume Up / Down then press and holdPower button. When the device screen goes blank release the Power button while continuing to holdVolume Up / Down, proceed with step 3.
2.Press and hold the Volume Up / Down then press the Power button.
3.When presented with the Boot Mode Selection Menu release all buttons.
4.Press Volume Down to select Recovery then press Volume Up.
5.From the Droid triage screen, simultaneously press Volume Up / Down.
6.Select Clear the Cache Partition then press the Power button.
7.Select reboot system now then press the Power button.
I also disabled all smart actions before starting the razr blade batch file. Don't know that it made any difference. Good luck.
I have a Droid Razr I've had a long time that I'd like to root. This is a regular Droid Razr (XT912), not M, HD, or Maxx. It's currently running Jellybean (4.1.2).
In researching how to root it, I came across Razr Blade as part of the Droid Razr Utility here: http://forum.xda-developers.com/showthread.php?t=2192467. I've tried to run through this a number of times but keep running into the same error.
Things I've already tried:
- Clearing Smart Actions cache
- Clearing all Smart Actions data
- Running the utility on both Mac and PC
- Updating phone drivers
- Making sure USB Debugging is enabled and that the phone is set to MTP mode.
The log is below. The issue always shows up during Phase Three. Any help is appreciated!
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
[*]
[*] Waiting for device...
[*] Device found.
[*] Phase one...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
154 KB/s (3477 bytes in 0.022s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
2501 KB/s (543080 bytes in 0.212s)
2840 KB/s (1867568 bytes in 0.642s)
2689 KB/s (476557 bytes in 0.173s)
1222 KB/s (63838 bytes in 0.051s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
Hit ENTER to return.
[Edit: Sorry, the log pasted in weirdly formatted. I'm not sure how to fix it since it looks fine in the edit view.]
Did you checked "Unknown sources" in the Settings/Security?
Here http://forum.xda-developers.com/showthread.php?t=2861798 is updated utility,try it,maybe you'll have better luck with it
Sent from my Razr XT910
welder73 said:
Did you checked "Unknown sources" in the Settings/Security?
Here http://forum.xda-developers.com/showthread.php?t=2861798 is updated utility,try it,maybe you'll have better luck with it
Sent from my Razr XT910
Click to expand...
Click to collapse
Hi, thanks for responding. I do have unknown sources checked off (allowed). I tried to download the updated utility and run it but had the same exact error. I have no idea what's happening or why it won't work.
I'm using the droidrzr.com as ldirected in the roms section.
phase 3 fails:
Code:
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
4558 KB/s (543080 bytes in 0.116s)
3804 KB/s (1867568 bytes in 0.479s)
3351 KB/s (476557 bytes in 0.138s)
3610 KB/s (63838 bytes in 0.017s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Any suggestions.
I'm looking for a ROM to replace stock which supports USB OTG and allows disabling of the HDMI port. Wife passed her phone on to my son when we upgraded hers but its always detecting HDMI even if there is nothing plugged in. The disable detection setting in the stock JB rom only disabled for a short time.
Thanks
There be will be a video by therazrguy in YouTube for rooting all jellybean RAZRs.. That's an easy method...
You've to disable MotoDockService. Also i guess you're having the screen Force Portrait issue. If it's so, there's a root app to force orientation..
A friend of mine bought a refurbished RAZR and it has this issue
EugeneNine said:
I'm using the droidrzr.com as ldirected in the roms section.
phase 3 fails:
Code:
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
4558 KB/s (543080 bytes in 0.116s)
3804 KB/s (1867568 bytes in 0.479s)
3351 KB/s (476557 bytes in 0.138s)
3610 KB/s (63838 bytes in 0.017s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Any suggestions.
I'm looking for a ROM to replace stock which supports USB OTG and allows disabling of the HDMI port. Wife passed her phone on to my son when we upgraded hers but its always detecting HDMI even if there is nothing plugged in. The disable detection setting in the stock JB rom only disabled for a short time.
Thanks
Click to expand...
Click to collapse
install this and do it so easy
Kingo Android Root
Hi!
You can try to download this app :
http://www.mediafire.com/download/n...1.3.6_Cekas+FIX+Sharebertron.blogspot.com.apk
AFAIK it's mod-ed version of RootMaster, the mod makes it easier to understand the Chinese words.
You'll receive notification from Google prior to installing saying that this app is unsafe since it's trying to break the android secure, but I think it's all fine, rooted my 4.1.2 JB XT910, when I was in ICS, TheRAZRGuy's method worked for me but ever since I flashed JB it wont work anymore. This worked well for me, no problems so far.
Hope this helped!