Ok, so I started off with a US 3.2 tablet with 2.6.36.3 with [email protected] #1, then flashed the official US 3.2.1R2 (signed-nbx03_001-ota-042.001.zip), which resulted in having the kernel at 5.
After running condi's tool, I was able to root. Now I am trying to follow condi's steps and upgrade to pre-rooted ICS by decrypting signed-nbx03_001-ota-12041004.zip, however at the boot to recovery mode step, it shows error:
"1 was unexpected at this time"
and self closes.
Any ideas on what what might be causing this? I'm using condi's latest version 4.1. Forgive me if this is an obvious error on my part.
I would post a screenshot but its not letting me.
Thanks
same case at AIO4.1
I'm not sure it's problem or not, so stopped to proceed.
any idea?
---------- Post added at 09:55 PM ---------- Previous post was at 09:41 PM ----------
host os:win xp sp3
android ver:3.2.1-r2 (THMAS0232400)
update firm: signed-nbx03_023-ota-120427050.zip (Japan)
etc: already rooted
log is shown in below.
Code:
[*]*****************************************************************[*]
[*] Sony Tablet S / Create decrypted update.zip [*]
[*] [+optional add root and "rescue-backdoor" built-in]. [*]
[*]*****************************************************************[*]
(..snip..)
[*]*****************************************************************[*]
[*] EXTERNAL SD is required - min. 1GB! [*]
[*]*****************************************************************[*]
Instructions:
1. Put your device in USB debugging mode. ROOT IS REQUIRED.
2. Attach it via USB
3. Run this script.
[*] Run device in normal boot.
[*] Press enter to begin...
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Checking device region...
202 KB/s (0 bytes in 6476.000s)
7-Zip (A) 9.20 Copyright (c) 1999-2010 Igor Pavlov 2010-11-18
Processing archive: backups\region.zip
Extracting region\region.prop
Everything is Ok
Size: 692
Compressed: 6476
1 file(s) copied.
43 KB/s (0 bytes in 692.000s)
[*] Region is OK...
[*] HACK zip is already prepared, but not on SD
[*] Pushing _hack_recovery.zip...
1295 KB/s (0 bytes in 15155925.011s)
[*] DONE. Its saved in '/sdcard/_hack_recovery.zip' for future use.
[*]**************************************************************[*]
[*] DEVICE POWERED OFF. [*]
[*]**************************************************************[*]
[*] NOW ENTER RECOVERY MODE = hold vol-up, and push power [*]
[COLOR="Red"]1 was unexpected at this time.[/COLOR]
C:\S.onyTablet.S [ALLinONE] v4.1>
hi guys,
thanks for reporting
dl attached file, unpack it and replace in /files/ directory.
please post results!
br
condi
hi condi,
That works! Thx!!
Then I proceeded to the last, almost all no problem.
But I confused in last phase because something like an error happend. (mentioned below in red)
Is it no problem?
Code:
[*]**************************************************************[*]
[*] DEVICE POWERED OFF. [*]
[*]**************************************************************[*]
[*] NOW ENTER RECOVERY MODE = hold vol-up, and push power [*]
[*] Go to update, and choose "install.zip" [*]
[*]**************************************************************[*]
[*] ...
[*]******************[*]
[*] Shell enabled! [*]
[*]******************[*]
[*] Please wait...
[COLOR="Red"]mv: can't rename '/sdcard/custom_update_signed.zip': No such file or directory
cannot create /sbin/recovery: text busy
[/COLOR]
[*]**************************[*]
[*] Flashing custom zip... [*]
[*]**************************[*]
[*] After all done - remember to DELETE /sdcard/install.zip file (your update)
or just RENAME it back to 'custom_update_signed.zip' for example ;)
[*] Press any key to exit.
after all, in that phase, I flashed install.zip at first. then, flashed custom_update_signed.zip.
Is it correct? (I'm not sure but it seems work fine ics.)
Thanks,
Thanks for the reply condi. After replacing the file I am seeing the same result as coosee when I proceed to autoflash, however, when if I skip autoflash and flash manually (custom rom menu #4 manual) the ics update was successful and I verified that I maintained root.
Thanks again!
Code:
Everything is Ok
Size: 399
Compressed: 5670
1 file(s) copied.
17 KB/s (399 bytes in 0.022s)
[*] Region is OK...
[*] HACK zip is already prepared, but not on SD
[*] Pushing _hack_recovery.zip...
1317 KB/s (18868490 bytes in 13.982s)
[*] DONE. Its saved in '/sdcard/_hack_recovery.zip' for future use.
[*]**************************************************************[*]
[*] DEVICE POWERED OFF. [*]
[*]**************************************************************[*]
[*] NOW ENTER RECOVERY MODE = hold vol-up, and push power [*]
[*] Go to update, and choose "install.zip" [*]
[*]**************************************************************[*]
[*] ...
[*]******************[*]
[*] Shell enabled! [*]
[*]******************[*]
[*] Please wait...
cannot create /sbin/recovery: text busy
[*] DONE. Now you can flash custom update.zip!!!
Choose the signed file from recovery :)
[*] Press any key to exit.
Related
http://www.droidrzr.com/index.php/topic/6924-root-achieved-for-jb-ota-razrmaxx-xt912/
Great news!
hecksagon said:
http://www.droidrzr.com/index.php/topic/6924-root-achieved-for-jb-ota-razrmaxx-xt912/
Click to expand...
Click to collapse
Awesome!
Sent from my DROID RAZR Maxx using Tapatalk 2
*break dances*
Sent from my DROID RaZr on JB.
just installed myself.
I need have root on the Jelly Bean OTA release. It was unique in how it had to be installed but it worked
Worked for me. Make sure you are in MTP, and have uninstalled all updates to smartactions.
heleonardman said:
Worked for me. Make sure you are in MTP, and have uninstalled all updates to smartactions.
Click to expand...
Click to collapse
Jelly Bean Root video
http://youtu.be/XDV_72mPt4k
Worked great.
Sent from my Transformer TF101 using xda premium
All hail the Dan Rosenberg the Saviour of bootloader locked motorolans !
Semseddin said:
All hail the Dan Rosenberg the Saviour of bootloader locked motorolans !
Click to expand...
Click to collapse
Agreed!! Worked like a charm for me!!
Sent from my DROID RAZR using xda premium
Great news!Great news!Great news!Great news!
Will not work for me . Tried it a bunch of times
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Phase one...
link failed No such file or directory
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
/system/bin/sh: cat: /data/data/com.motorola.contextual.fw/files/DataClearJarDex
.jar: No such file or directory
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
3 KB/s (3477 bytes in 1.000s)
/system/bin/sh: can't create /data/data/com.motorola.contextual.fw/files/DataCle
arJarDex.jar: No such file or directory
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
1919 KB/s (91992 bytes in 0.046s)
3896 KB/s (1867568 bytes in 0.468s)
3594 KB/s (574184 bytes in 0.156s)
1998 KB/s (63838 bytes in 0.031s)
[*] Cleaning up...
/system/bin/sh: can't create /data/data/com.motorola.contextual.fw/files/DataCle
arJarDex.jar: No such file or directory
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
subiboost said:
Will not work for me . Tried it a bunch of times
Click to expand...
Click to collapse
Did you make sure you're not in Mass Storage Mode?
Did you uninstall all updates to Smart Actions and clear its data?
Sent from my Transformer TF101 using xda premium
subiboost said:
Will not work for me . Tried it a bunch of times
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Phase one...
link failed No such file or directory
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
/system/bin/sh: cat: /data/data/com.motorola.contextual.fw/files/DataClearJarDex
.jar: No such file or directory
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
3 KB/s (3477 bytes in 1.000s)
/system/bin/sh: can't create /data/data/com.motorola.contextual.fw/files/DataCle
arJarDex.jar: No such file or directory
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
1919 KB/s (91992 bytes in 0.046s)
3896 KB/s (1867568 bytes in 0.468s)
3594 KB/s (574184 bytes in 0.156s)
1998 KB/s (63838 bytes in 0.031s)
[*] Cleaning up...
/system/bin/sh: can't create /data/data/com.motorola.contextual.fw/files/DataCle
arJarDex.jar: No such file or directory
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Click to expand...
Click to collapse
I am getting the exact same error and I've uninstalled the smartaction updates and I am connected via mpt...ugh
I apologize in advance if this is a noob question but do I have to have android adb installed on my computer to use this rooting method? Thanks for any help.
Sent from my DROID RAZR using xda premium
Stick_man09 said:
I apologize in advance if this is a noob question but do I have to have android adb installed on my computer to use this rooting method? Thanks for any help.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Its better to have it installed ... though I don't see why u need it..
Sent from my DROID RaZr on JB.
Stick_man09 said:
I apologize in advance if this is a noob question but do I have to have android adb installed on my computer to use this rooting method? Thanks for any help.
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
PROGUERAM said:
Its better to have it installed ... though I don't see why u need it..
Sent from my DROID RaZr on JB.
Click to expand...
Click to collapse
I have adb installed on my computer, but have not yet seen a reason for it on the Razr. Now for my LG optimus S i used adb all the time.
blackops11252 said:
I have adb installed on my computer, but I get a error: device not found. any idea why?
Click to expand...
Click to collapse
I had the same problem with another process before. My issue was I didn't have the Motocast software installed. I assumed the default drivers loaded with windows would be fine, but they didn't work.
For the people who don't already know this, before you run the process, you can verify your device is seen by running the command 'adb devices' without the quotes from the command prompt (provided you point your command prompt to the folder you have adb in or set the system environment variable). Before I installed motocast on my computer it wouldn't show a device. After I installed the moto drivers it showed a device with this command.
Oh BTW thanks to the awesome devs for making these batch processes for all of us. These easy roots have been great.
blackops11252 said:
I have adb installed on my computer, but have not yet seen a reason for it on the Razr. Now for my LG optimus S i used adb all the time.
Click to expand...
Click to collapse
Honestly I could never understand adb in my life..
Sent from my DROID RaZr on JB.
Schnider said:
Agreed!! Worked like a charm for me!!
Sent from my DROID RAZR using xda premium
Click to expand...
Click to collapse
Will this work on Atrix HD on JB
Does anyone have any suggestions? I have tried every way possible and I am still unable to root my RAZR maxx. Help
Sent from my DROID RAZR using xda app-developers app
Have ya tried matts droid utility for rooting RAZR
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Are you running the jellybean 4.1.2 OTA?
Sent from my XT912 using xda app-developers app
Yes I am running ota and have tried both root programs?
Sent from my DROID RAZR using xda app-developers app
Unsure drivers are up to date... Alternate USB cable... Check device manager to unsure device is properly connected... Alternate computer... What all have you tried to trouble shoot the issue... Where does it fail... Does it say it was successful yet no root...
south2087 said:
Yes I am running ota and have tried both root programs?
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
What post are you following step by step to root it?
Have you tried the RAZR Blade method?
Sent from my OG RAZR
Also having problems
Attempting the Razrblade root and getting permission denied errors when the script is running.
Code:
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
[*]
[*] Waiting for device...
[*] Device found.
[*] Phase one...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
178 KB/s (3477 bytes in 0.019s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
410 KB/s (543080 bytes in 1.292s)
510 KB/s (1867568 bytes in 3.575s)
480 KB/s (476557 bytes in 0.969s)
448 KB/s (63838 bytes in 0.139s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
Hit ENTER to return.
No idea what's gone wrong here. Any help would be appreciated. I work in IT, and know linux pretty well, but I've never attempted to modify my phone before and would love to know what to try next that won't risk breaking anything.
Steps attempted so far:
* Clearing Smart Actions data and updates
* Ensuring phone is connected as camera (it is)
* Latest USB drivers installed
* Debugging mode enabled
Not sure if it matters, but I JUST updated this phone to 4.1.2 yesterday. Could they have patched this exploit?
xb4r7x said:
Attempting the Razrblade root and getting permission denied errors when the script is running.
Code:
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
[*]
[*] Waiting for device...
[*] Device found.
[*] Phase one...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
178 KB/s (3477 bytes in 0.019s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
410 KB/s (543080 bytes in 1.292s)
510 KB/s (1867568 bytes in 3.575s)
480 KB/s (476557 bytes in 0.969s)
448 KB/s (63838 bytes in 0.139s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
Hit ENTER to return.
No idea what's gone wrong here. Any help would be appreciated. I work in IT, and know linux pretty well, but I've never attempted to modify my phone before and would love to know what to try next that won't risk breaking anything.
Steps attempted so far:
* Clearing Smart Actions data and updates
* Ensuring phone is connected as camera (it is)
* Latest USB drivers installed
* Debugging mode enabled
Not sure if it matters, but I JUST updated this phone to 4.1.2 yesterday. Could they have patched this exploit?
Click to expand...
Click to collapse
if you are using xt910 then this method won't work on that . look out into development section for rooting method
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
incumbent ersordic
anurag.dj2u said:
if you are using xt910 then this method won't work on that . look out into development section for rooting method
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
excuse my ignorance, but how can you tell? I was under the impression that xt910 was the international gsm version? I'm in the us on the vzw network.
xb4r7x said:
excuse my ignorance, but how can you tell? I was under the impression that xt910 was the international gsm version? I'm in the us on the vzw network.
Click to expand...
Click to collapse
You're right Thats an XT912(CDMA version).
As for your problem,I'd re-install the drivers,thats what cause problem most of the times. Also try changing the port you're using.
Run the utility as admin.
Thanks... still no luck
neo.ank said:
You're right Thats an XT912(CDMA version).
As for your problem,I'd re-install the drivers,thats what cause problem most of the times. Also try changing the port you're using.
Run the utility as admin.
Click to expand...
Click to collapse
I tried re-installing windows drivers, no joy. Booted into Ubuntu and tried the shell script... same errors. Tried a different computer (Ubuntu) and it hung on 'Waiting for device' (I dont think the phone was mounting properly, but that laptop is a pile so I'd rather not spend too much time with it).
I'll be trying again on my fiancee's mac... but if it still fails I'm out of ideas.
[EDIT]: It did fail, same place...
If you're not on the JB kernel, try using DroidRazrUtility. I used it and it's foolproof.
Sent from my XT912 using xda app-developers app
cschuck320 said:
If you're not on the JB kernel, try using DroidRazrUtility. I used it and it's foolproof.
Sent from my XT912 using xda app-developers app
Click to expand...
Click to collapse
I am using DroidRazrUtility...
xb4r7x said:
I am using DroidRazrUtility...
Click to expand...
Click to collapse
Then roll back to the ICS kernel and then use the Utility.
I got the January 7th OTA update. I lost root. I do have Voodoo OTA root keeper, and it said root restored but it didn't check the box. I also have SuperUser but I keep getting the # sign in the status bar to update su bin. When I try to update it gives me an error message. I tried to use a few root dependent apps to test if root was truly gone, and, indeed, it was.
I gave up and decided I should just try to reroot. So I ran Razrblade Utility that I used to root jellybean in the first place, and not even that works. I have safestrap if that means anything. Any ideas?
Here is the dialogue box I get when I try to run Razr Blade
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Phase one...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
55 KB/s (3477 bytes in 0.061s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
472 KB/s (91992 bytes in 0.190s)
1211 KB/s (1867568 bytes in 1.505s)
1259 KB/s (574184 bytes in 0.445s)
878 KB/s (63838 bytes in 0.071s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Terminate batch job (Y/N)?
Me too
thrax12 said:
I got the January 7th OTA update. I lost root. I do have Voodoo OTA root keeper, and it said root restored but it didn't check the box. I also have SuperUser but I keep getting the # sign in the status bar to update su bin. When I try to update it gives me an error message. I tried to use a few root dependent apps to test if root was truly gone, and, indeed, it was.
I gave up and decided I should just try to reroot. So I ran Razrblade Utility that I used to root jellybean in the first place, and not even that works. I have safestrap if that means anything. Any ideas?
Here is the dialogue box I get when I try to run Razr Blade
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
Press any key to continue . . .
[*]
[*] Waiting for device...
* daemon not running. starting it now *
* daemon started successfully *
[*] Device found.
[*] Phase one...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
55 KB/s (3477 bytes in 0.061s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
472 KB/s (91992 bytes in 0.190s)
1211 KB/s (1867568 bytes in 1.505s)
1259 KB/s (574184 bytes in 0.445s)
878 KB/s (63838 bytes in 0.071s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Press any key to continue . . .
Terminate batch job (Y/N)?
Click to expand...
Click to collapse
I had the same problem. However after clearing the cache I was able to regain root.
1.Power the device off.
Note Press the Power button then select Power off.
Note If the device doesn't respond to input, press and hold the Volume Up / Down then press and holdPower button. When the device screen goes blank release the Power button while continuing to holdVolume Up / Down, proceed with step 3.
2.Press and hold the Volume Up / Down then press the Power button.
3.When presented with the Boot Mode Selection Menu release all buttons.
4.Press Volume Down to select Recovery then press Volume Up.
5.From the Droid triage screen, simultaneously press Volume Up / Down.
6.Select Clear the Cache Partition then press the Power button.
7.Select reboot system now then press the Power button.
I also disabled all smart actions before starting the razr blade batch file. Don't know that it made any difference. Good luck.
I have a Droid Razr I've had a long time that I'd like to root. This is a regular Droid Razr (XT912), not M, HD, or Maxx. It's currently running Jellybean (4.1.2).
In researching how to root it, I came across Razr Blade as part of the Droid Razr Utility here: http://forum.xda-developers.com/showthread.php?t=2192467. I've tried to run through this a number of times but keep running into the same error.
Things I've already tried:
- Clearing Smart Actions cache
- Clearing all Smart Actions data
- Running the utility on both Mac and PC
- Updating phone drivers
- Making sure USB Debugging is enabled and that the phone is set to MTP mode.
The log is below. The issue always shows up during Phase Three. Any help is appreciated!
[*]
[*] Razr Blade: Motorola Droid Razr 4.1 Root Exploit (Windows version)
[*] by Dan Rosenberg (@djrbliss)
[*]
[*] Thanks to p3droid for assistance in testing.
[*]
[*] Note: this will not work on Razr HD, Razr M, etc.
[*]
[*] Before continuing, ensure USB debugging is enabled, that you
[*] have the latest Motorola drivers installed, and that your phone
[*] is connected via USB.
[*]
[*] Please carefully follow any instructions provided in the exploit.
[*]
[*] Press enter to root your phone...
[*]
[*] Waiting for device...
[*] Device found.
[*] Phase one...
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase two...
[*] Complete the following steps on your device:
[*] 1. Open the Smart Actions application.
[*] 2. Select "Get Started".
[*] 3. Select "Battery Saver".
[*] 4. Select "Save".
[*] 5. Press the Home button.
[*]
[*] Press enter here once you have completed the above steps.
Press any key to continue . . .
154 KB/s (3477 bytes in 0.022s)
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
2501 KB/s (543080 bytes in 0.212s)
2840 KB/s (1867568 bytes in 0.642s)
2689 KB/s (476557 bytes in 0.173s)
1222 KB/s (63838 bytes in 0.051s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
Hit ENTER to return.
[Edit: Sorry, the log pasted in weirdly formatted. I'm not sure how to fix it since it looks fine in the edit view.]
Did you checked "Unknown sources" in the Settings/Security?
Here http://forum.xda-developers.com/showthread.php?t=2861798 is updated utility,try it,maybe you'll have better luck with it
Sent from my Razr XT910
welder73 said:
Did you checked "Unknown sources" in the Settings/Security?
Here http://forum.xda-developers.com/showthread.php?t=2861798 is updated utility,try it,maybe you'll have better luck with it
Sent from my Razr XT910
Click to expand...
Click to collapse
Hi, thanks for responding. I do have unknown sources checked off (allowed). I tried to download the updated utility and run it but had the same exact error. I have no idea what's happening or why it won't work.
I'm using the droidrzr.com as ldirected in the roms section.
phase 3 fails:
Code:
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
4558 KB/s (543080 bytes in 0.116s)
3804 KB/s (1867568 bytes in 0.479s)
3351 KB/s (476557 bytes in 0.138s)
3610 KB/s (63838 bytes in 0.017s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Any suggestions.
I'm looking for a ROM to replace stock which supports USB OTG and allows disabling of the HDMI port. Wife passed her phone on to my son when we upgraded hers but its always detecting HDMI even if there is nothing plugged in. The disable detection setting in the stock JB rom only disabled for a short time.
Thanks
There be will be a video by therazrguy in YouTube for rooting all jellybean RAZRs.. That's an easy method...
You've to disable MotoDockService. Also i guess you're having the screen Force Portrait issue. If it's so, there's a root app to force orientation..
A friend of mine bought a refurbished RAZR and it has this issue
EugeneNine said:
I'm using the droidrzr.com as ldirected in the roms section.
phase 3 fails:
Code:
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase three (this will take a minute)...
failed on '/data/logger' - Permission denied
mkdir failed for /data/logger, File exists
Unable to chmod /data/logger: Operation not permitted
link failed File exists
[*] Rebooting device...
[*] Waiting for phone to reboot.
[*] Phase four...
4558 KB/s (543080 bytes in 0.116s)
3804 KB/s (1867568 bytes in 0.479s)
3351 KB/s (476557 bytes in 0.138s)
3610 KB/s (63838 bytes in 0.017s)
[*] Cleaning up...
/system/bin/sh: su: not found
[*] Rebooting...
[*] Exploit complete!
[*] Press any key to exit.
Any suggestions.
I'm looking for a ROM to replace stock which supports USB OTG and allows disabling of the HDMI port. Wife passed her phone on to my son when we upgraded hers but its always detecting HDMI even if there is nothing plugged in. The disable detection setting in the stock JB rom only disabled for a short time.
Thanks
Click to expand...
Click to collapse
install this and do it so easy
Kingo Android Root
Hi!
You can try to download this app :
http://www.mediafire.com/download/n...1.3.6_Cekas+FIX+Sharebertron.blogspot.com.apk
AFAIK it's mod-ed version of RootMaster, the mod makes it easier to understand the Chinese words.
You'll receive notification from Google prior to installing saying that this app is unsafe since it's trying to break the android secure, but I think it's all fine, rooted my 4.1.2 JB XT910, when I was in ICS, TheRAZRGuy's method worked for me but ever since I flashed JB it wont work anymore. This worked well for me, no problems so far.
Hope this helped!