Hi Guys,
First of all, i have used the search button to get my answer. But still couldnt find answers for all questions. So i thought i will post it here.
1. Does Darktremours a2sd comes pre-intalled with jusada's roms ? If not, can we install it separately ? If yes, where can i get it ?
2. Which is the best combination among the following ?
-- ICSSunday Final(with tweaks) with SlaidFastMod
-- ICSSunday Final(without tweaks) with SlaidFastMod
-- ICS2 with SlaidFastMod
-- Any other combo ???
3. Can we use swap partition on Ace ? What is the best swappiness value according to you ?
Wish I could help but I really haven't tried that ROM much. But at least I'll bump your question up...
Sent from my GT-S5830D using xda premium
1- dont really know. but if its not, yes u can install it manually. download script from here, put in root of sdcard, reboot into recovery, mount system partition, and flash it. finally read this for list of its commands.
2- not really sure. just try them all and stick with the one u like.
3- all of those jusada's ics u mention is based on cm7, which already had zram compcache. its similar to swap in a way. but if u use stock rom, cfroot kernel had swap function. just need to partition sdcard manually and activate it urself.
I like ics2 than ics final.
Now if you want to choose then choose ics without tweaks it is better than ics with tweaks.I have tried both.
If I helped you In any means hit thanks button.....
Hi,
I like Icsunday final (without tweeks) and LagfreeV1 script. Additionally set CPU govenor to “smartass“ and minimum CPU frequency to 245 to avoid the unlock lag.
I am absolutely happy with these settings
Gesendet von meinem GT-S5830 mit Tapatalk
Thanks a ton Guys,
Here is what i did.
I tried both ICS final without tweaks and ICS2. I didnt like the look of ICS2. So i switched to ICS final without tweaks.
I installed a2sd as described by an0nym0us_. Works flawlessly. Moved the dalvik cache to sdcard set zipalign on boot.
Installed lagfreeV1 script.
Tried Chainfire3D. It screwed my phone. So had to repeat the above steps again
P.S. Now i have taken Nandroid backup
Now planning to use SetCpu instead of OC options in CM CPU governor.. Because when i tried to set OC using CM, my phone rebooted randomly.
Anybody tried to use swapping on Ace ? Did you use A2SDGUI or any other app to activate swap ? I have swap partition in my droid and I used it when i had FirstUA1.2 ROM.
EDIT: Guys. Just found out the problem for random restarts was not ChainFire . It was a2sd !! Trying link2sd. Will let you know how it goes.
I tried swapping before ICSunday - with swapper 2 on cm7.1. But I was not happy with that.
I never knew why, but my phone is much faster now without swapper.
Sent from my GT-S5830 using Tapatalk
*************************
ICSunday Final
Lagfree V1
Related
hello everybody
my friend neo just made a themed MIUI rom
i am using it and its great
but before putting it on development section i want to know are there any takers for this
here is how it is different from drnotors rom
build it frm famous Mik's ROM 6.5.7 stable
Franco kernel 19.2
s97 script
Zram enabled
Loopy script set
ungaze's a2sd included
few modules added
locked memory for launcher so its cached and no lag in using launcher with script,also call,msg and so on....
battery backup really good...
Since he has already made changes in framework for transperancy on Lense lock and taskbar...need not install a separate patch like Dr.notor....
pls let me know
thanks
docjayesh said:
hello everybody
my friend neo just made a themed MIUI rom
i am using it and its great
but before putting it on development section i want to know are there any takers for this
here is how it is different from drnotors rom
build it frm famous Mik's ROM 6.5.7 stable
Franco kernel 19.2
s97 script
Zram enabled
Loopy script set
ungaze's a2sd included
few modules added
locked memory for launcher so its cached and no lag in using launcher with script,also call,msg and so on....
battery backup really good...
Since he has already made changes in framework for transperancy on Lense lock and taskbar...need not install a separate patch like Dr.notor....
pls let me know
thanks
Click to expand...
Click to collapse
Why not just post it if its so different?
Sent from my LG-P500 using xda premium
docjayesh said:
hello everybody
my friend neo just made a themed MIUI rom
i am using it and its great
but before putting it on development section i want to know are there any takers for this
here is how it is different from drnotors rom
build it frm famous Mik's ROM 6.5.7 stable
Franco kernel 19.2
s97 script
Zram enabled
Loopy script set
ungaze's a2sd included
few modules added
locked memory for launcher so its cached and no lag in using launcher with script,also call,msg and so on....
battery backup really good...
Since he has already made changes in framework for transperancy on Lense lock and taskbar...need not install a separate patch like Dr.notor....
pls let me know
thanks
Click to expand...
Click to collapse
Why u use Fkv19.2?? Why never use v19.4? Is it becuz of vsync?
dax4182 said:
Why u use Fkv19.2?? Why never use v19.4? Is it becuz of vsync?
Click to expand...
Click to collapse
it was made some time earlier
we were checking for bugs
you can update to 19.4 as i did
Well lets see it bro, I had no problems using Dr.notors rom but I agree with dax, use 19.4,smartassv2 is a great governor
Sent from my LG-P500 using XDA App
sorry my bad
forgot one imp addition
flash player added as default
neo has posted it already ind Dev section
have a look at this
http://forum.xda-developers.com/showthread.php?t=1255497
Is Turbo booster and Lagfree V2 compatible? I've read on the lagfree thread that it is but after I checked out the turbo booster thread it says not to install it with any other ram scripts.
So... is it compatible or not? Also, upon installing, are there any specific permissions needed to be set to either script? Or can they just be installed and left alone?
i think they are
but if they both have same thing modded but with different results then phone will use from 2nd script flashed
my opinion
turboboost and slaidmodv3 are compatible.... turboboost and lagfree... I don't know. If I was to use a combination I would go with the first one, othewise only turboboost alone!
I m running on cm7.2 and installed both TB v8.5 and lagfree v2.. I hav it in my custom ROM also.. No problem
Same with me...
Sent from my GT-S5830 using xda premium
Alright, thanks a lot guys! Flashing Turbo boost in a bit
slaid480 says you have to delete a script from init.d, s78 touchscreen or something like that. Then flash.
currently i already flash the LagfixV3 , but can i flash TurboBoost™-V8.5 add in with CWM also ? got any effect ? ? lol ....
Yes sure you can......its compatble
Sent from my GT-S5830 using xda premium
http://forum.xda-developers.com/showthread.php?t=1439516
above link show many tweaks , and if i flash all also doesn't matter one ?
use lagfree v3
turboboost v8.5
[tweak] PFGPS v2.0 FIX - improve speed and accuracy GPS
If you look at the thread below, lagfreeV3 currently has a few bugs, and it duplicates all of turboboost, so my answer would be wait till lagfreeV3 is fixed of bugs, then think whether you need two scripts to repeat each other (doubt it will harm much, but it will slow down boot at the minimum and isn't really efficient!)
http://forum.xda-developers.com/showpost.php?p=22307382&postcount=1
Have a question about some overclocking "issue".
Installed this ROM: http://forum.xda-developers.com/showthread.php?t=1537913
Installed this Kernel: http://forum.xda-developers.com/showthread.php?t=1158197
All things went ok, then installed SetCPU, and i saw i can't pass 900Mhz or even i can't go further with the slider.
Is this normal ? Or should be some issue ?
You have flashed a non overclock kernel
Flash an overclock kernel
----------------
Sent from my Ace. Galaxy Ace
Could you tell me what kernel to use from this list, to be overclockable ?
http://forum.xda-developers.com/showpost.php?p=21273834&postcount=2
And is non-overclockable why i have 900mhz from 800 ?
Are you on Stock or CyanogenMod Rom?
If on Cyanogenmod use this:
http://forum.xda-developers.com/showthread.php?t=1296905
Download the "cm-blackhawk-kernel.zip".
Huh ? I don't know, i've said that i've installed that ROM above.
ohhh... SRY! my fault
A bit tired...
Have you got CWM-Manger (I mean the APP) installed?
And what kernel from http://forum.xda-developers.com/showthread.php?t=1158197 did you install? If you flashed the "b84", you have got OVERCLOCK!
edit: You said, you can't go with the slider----> Ketut limited it to 900 MHZ!
booted into recovery mode, choose install zip from sd card, and the installation was aborted.
edit: ohh, then what cm7 roms can you recommend me ?
I am a f****** idiot.....
Now I am confused too. The Intructions are confusiong and I'm too. SRY
Good Luck!
Recommend by ME CyanogenMod Roms:
-CM 7.2 by FAT
-CM7.2 by vo-1
-I am using LEWA, but i think you should use for beginning one of them above, cuz the are supporting all languages and so on.
Heyyy download the b83. Kernel from the kernel list this will get you overclocking
----------------
Sent from my Ace. Galaxy Ace
I don't want to mess up my phone, I had a hard time trying to install CyanogenMod Rom, then I successfully partitioned my SD to link apps via Link2SD. So, I was trying to install this tweaks but it seems to much for me, I have no idea what I'm doing, please help.
http://pablort.com/wp-content/uploads/2012/03/IHaveNoIdeaWhatImDoing15_thumb.jpg
go to the original thread n read carefully, its not that complicated
http://forum.xda-developers.com/showthread.php?t=991276
I want it too.
Sent from my WT19i using Tapatalk 2
Has anyone tried it on stock ICS with stock kernel ? Perhaps on LWW ?
edit: nvm, 100% supercharged