Have a question about some overclocking "issue".
Installed this ROM: http://forum.xda-developers.com/showthread.php?t=1537913
Installed this Kernel: http://forum.xda-developers.com/showthread.php?t=1158197
All things went ok, then installed SetCPU, and i saw i can't pass 900Mhz or even i can't go further with the slider.
Is this normal ? Or should be some issue ?
You have flashed a non overclock kernel
Flash an overclock kernel
----------------
Sent from my Ace. Galaxy Ace
Could you tell me what kernel to use from this list, to be overclockable ?
http://forum.xda-developers.com/showpost.php?p=21273834&postcount=2
And is non-overclockable why i have 900mhz from 800 ?
Are you on Stock or CyanogenMod Rom?
If on Cyanogenmod use this:
http://forum.xda-developers.com/showthread.php?t=1296905
Download the "cm-blackhawk-kernel.zip".
Huh ? I don't know, i've said that i've installed that ROM above.
ohhh... SRY! my fault
A bit tired...
Have you got CWM-Manger (I mean the APP) installed?
And what kernel from http://forum.xda-developers.com/showthread.php?t=1158197 did you install? If you flashed the "b84", you have got OVERCLOCK!
edit: You said, you can't go with the slider----> Ketut limited it to 900 MHZ!
booted into recovery mode, choose install zip from sd card, and the installation was aborted.
edit: ohh, then what cm7 roms can you recommend me ?
I am a f****** idiot.....
Now I am confused too. The Intructions are confusiong and I'm too. SRY
Good Luck!
Recommend by ME CyanogenMod Roms:
-CM 7.2 by FAT
-CM7.2 by vo-1
-I am using LEWA, but i think you should use for beginning one of them above, cuz the are supporting all languages and so on.
Heyyy download the b83. Kernel from the kernel list this will get you overclocking
----------------
Sent from my Ace. Galaxy Ace
Related
Hey guys, i hv rooted my phone n I want to flash a lag fix kernel on stock rom 2.2.2.. Which one sould I go for,
mik_os 1.1 / mik_os 1.2 / LOL lag fix kernel / any other?
Plz suggest the best one..
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
How is it better than the others??
sarfaraz1989 said:
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
Click to expand...
Click to collapse
can these kernels be installed with stock rom?
my phone says:
android version: 2.2
kernel version: 2.6.32.9
software version: v10c - oct-19-2010
i rooted the phone without hitches using z4root. i just want a better kernel as not brave enough for the custom ROMs.
thanks
ash
sarfaraz1989 said:
neither ,,,theres a der_caveman fix signed-kernelv1.1 optimised by sippolo everybody is using that one
Click to expand...
Click to collapse
Thnx sarfaraz..
I flashed der_caveman fix signed-kernelv1.1.It made my gaming experience much better..I flashed mik_os too but sippolo's one was better..
where can i find der_caveman fix signed-kernelv1.1 optimised by sippolo?
guys if u are into gaming ...Courtesy a dev franscisco.franco...He have a super optimised rom best for gaming i just installed it its amazing !!!! And the best part it has all optimizations in it u dont have to worry abt a thing..Just follow the instructions and set it up...Its got everything from best kernel to awesome hacks and tweaks i m loving it
http://forum.xda-developers.com/showthread.php?t=1049518
7s10u said:
where can i find der_caveman fix signed-kernelv1.1 optimised by sippolo?
Click to expand...
Click to collapse
here
http://forum.xda-developers.com/showpost.php?p=11270721&postcount=237
sarfaraz1989 said:
guys if u are into gaming ...Courtesy a dev franscisco.franco...He have a super optimised rom best for gaming i just installed it its amazing !!!! And the best part it has all optimizations in it u dont have to worry abt a thing..Just follow the instructions and set it up...Its got everything from best kernel to awesome hacks and tweaks i m loving it
http://forum.xda-developers.com/showthread.php?t=1049518
Click to expand...
Click to collapse
thanks,but do you know if i can find only the kernel to flash or i must flash the rom because im in lol 1.4.2 rom with dookmat kernel flashed over and works great
well u can always flash the kernel (caveman's) with the link i posted above
Does data of phone wipes after flashing with custom kernel?
I've all things done made a custom recovery even. With 1.2 version even.anything else I need to do?
Sent from my LG-P500 using XDA App
thanks!!!!!
is there any kernel which helps with battery life. I don't necessarily want a custom rom. any kernel which helps with battery life I would be interested. my rooted stock v.10c is running out of juice rather quickly and I am not yet using heavily. I am not too much into gaming or multimedia. 3g has to be on; as in my area 2g signal is worse than 3g.... go figure.
thanks
ash
i recommend u flash der_caveman's kernel and install and setup juice defender from market..I have done the same..Plus a tweaks like low brightness and powersave governor when screen is off(SetCPU) help
Hi all can i try flashing this kernel on my stock rom...This one seems nice..
[ROM] devoid.franco (franco.Kernel.v6: BFQ,BFS,smartass,lagfix,3D drivers +)
so it seems like LG Optimus one P500 is supported by Rom manager as it is listed in the clockworkmod website.
so after i rooted the phone, i can install CWM Recovery from rom manager right?
and flash custom ROM through it right?
i want to install milk's cm 7.1 port for p500, its listed in the clockworkmod website.
so yeah it should work right? and will installing that ROM fix the well known touchscreen bug on the optimus one? i mean the inverted axis multitouch bug and the cpu spike when scrolling bug, or do i need to flash something else after that? if yes could u pls link me to it.
and from what im seeing, p500 kernel is flashable through recovery eh? unlike the x8/x10 mini/pro in which we need to use flash tool?
edit: ive noticed the mik's os in clockworkmod website is beta 6.5.5 in which the latest one is 6.5.8 right? so ill just download the latest 6.5.8 from xda and flash it through rom manager?
yes, but first do a backup in cwm recovery, then wipe everything, flash rom , reboot, flash gapps, the flash from here http://forum.xda-developers.com/showthread.php?t=1227682 BFS gbs.v19.2, and you should be fine, the spikes arent fixed yet
but LG fixed it already in it latest gingerbread ROM, why isnt it fixed in cyanogenmod rom yet? proof utube /watch?v=wgV56dLSbEs
edit :
from MikOS thread :
beta6.5.5 (2011-06-27):
kernel: franco's v18 + 2.6.32.42
Wired headset media button fix moved to kernel
Camera: higher defaults exposure
Updated CM sources (RC1 now)
its already using franco? do i still need to flash that goldenleaf thing?
Remember, that our device isn't officially supported by team Cyanogen.
And that kernel is the old one - look at development section - there's and updated one (i suggest latest goldenleaf + mik's 6.5.8 (your release is old too))
alright so now i wanna clear things up, heres the step i should do :
1.root+install busybox
2.install rom manager and from there install CWM Recovery
3.download latest goldleaf/GBS kernel and latest mik's OS 6.5.8
4.in rom manager, make backup, flash mik's os ROM, reboot, flash gapps, reboot, flash GBS kernel, reboot, full wipe everything.
5. voila!
so thats it right? is there anything i missed? and can i use gapps from rom manager (20110828 Universal) ? if i can't could u please link me to the gapps that i shud be installing?
edit:can i flash franco.Kernel.v19.4 instead of the goldleaf kernel, coz it seems in franco kernel the cpu spike and axis inversion is fixed
6 - August - 2011 - v19
Good touchscreen drivers which should have the CPU **** fixed and the axis inversion workaround
Click to expand...
Click to collapse
Hi everybody, i tried to flash the oc kernel of ketut in the stock rom 2.3.x .. i saw that wifi doesn' t work.. anyone can fix it? Or need a new kernel? When i try to turn on the wifi it say me "error".. Honestly i don't try 3g connection or bluethoot.. Anyone have a solution?
Sorry for my Very Very Very bad english..
Lorubik said:
Hi everybody, i tried to flash the oc kernel of ketut in the stock rom 2.3.x .. i saw that wifi doesn' t work.. anyone can fix it? Or need a new kernel? When i try to turn on the wifi it say me "error".. Honestly i don't try 3g connection or bluethoot.. Anyone have a solution?
Sorry for my Very Very Very bad english..
Click to expand...
Click to collapse
Fisrst,OC kernel is for CM7 roms is you want to try it on stock so try it on BlackHwak Rom By Ketut
PS:This is developement dection post it elswer!!!
Sorry but i don' t understand perfectly the blackhawk rom.. it is only convert from rfs to ext4?
wifi error not dev issue?
slaid480 said:
Fisrst,OC kernel is for CM7 roms is you want to try it on stock so try it on BlackHwak Rom By Ketut
PS:This is developement dection post it elswer!!!
Click to expand...
Click to collapse
isn't wifi error on non stock kernels a developement issue?
BTW i had the same wifi error aswell as i thought sod it i'll try it.
thinking its a driver not loading correctly from the limited knowledge i have?
The Ketut's OC Kernel would make wifi stop working on stock ROM, because the OC kernel is ONLY FOR CYANOGENMOD 7.
Clear? Disable SetCPU and Flash CF-Root to get wifi back.
And this should be in general section actually >_>
KcLKcL said:
The Ketut's OC Kernel would make wifi stop working on stock ROM, because the OC kernel is ONLY FOR CYANOGENMOD 7.
Clear? Disable SetCPU and Flash CF-Root to get wifi back.
And this should be in general section actually >_>
Click to expand...
Click to collapse
i know this, but can' t ketut create an oc kernel for stock rom? he' s a good developers..
AFAIK*, It's not possible in stock ROM.
AFAIK = As Far As I Know.
KcLKcL said:
The Ketut's OC Kernel would make wifi stop working on stock ROM, because the OC kernel is ONLY FOR CYANOGENMOD 7.
Clear? Disable SetCPU and Flash CF-Root to get wifi back.
And this should be in general section actually >_>
Click to expand...
Click to collapse
i know its for cm7 only but this wifi error issue just keeps on getting ignored and also the point of customisation is to mix and match roms and kernels to suit personal taste!
i like stock roms aswell as custom roms but to overclock we have no choice but to flash cm7 roms.
also i have never found an explanation to what causes the error in the first place!
somone answer please
ASHLEY117 said:
i know its for cm7 only but this wifi error issue just keeps on getting ignored and also the point of customisation is to mix and match roms and kernels to suit personal taste!
i like stock roms aswell as custom roms but to overclock we have no choice but to flash cm7 roms.
also i have never found an explanation to what causes the error in the first place!
somone answer please
Click to expand...
Click to collapse
Simple: It's just not compatible with the Samsung ROM. The modules are a bit different. And If I'm not mistaken, the Samsung's Kernel doesn't support OC.
ASHLEY117 said:
isn't wifi error on non stock kernels a developement issue?
Click to expand...
Click to collapse
Tell this to mod when get worning
90% prob related thread are related to development so if all comes here you cant find any development things lol
All question related thread related to app or themes or developmen should be in general to keep things clean
Peace
lol. ur thread title make u looks like ur posting new kernel, while its just a question. no need to create new thread just for asking question and cluttering this dev subforum.
btw its possible to create oc kernel for stock rom, its just merely editing a file in the sourcecode.
an0nym0us_ said:
btw its possible to create oc kernel for stock rom, its just merely editing a file in the sourcecode.
Click to expand...
Click to collapse
Thought it's not possible? lol
Is the Ketut's CF-Root source available? I may take a look..
thank you
thanx for all who answered, and good point nims11, if it is pos then i will just wait until stock oc kernel pops up on here,
i will now shut up and put up! (LOL)
i had a gut feeling it would be either drivers or modules so thanks for answering
an0nym0us_ said:
lol. ur thread title make u looks like ur posting new kernel, while its just a question. no need to create new thread just for asking question and cluttering this dev subforum.
btw its possible to create oc kernel for stock rom, its just merely editing a file in the sourcecode.
Click to expand...
Click to collapse
Me too..I thought there was a new kernel for SGA..Especially,the DEVS ONLY part in title got my attention,A small note to OP,this is not something only devs can figure out.
I can't make an OC kernel *cries*
Herpderp DXKPB.
Is there any OC kernel Available for stock roms
CF-ROOT b83
Herpderp Adreno + Tegra.
EmoBoiix3 said:
I can't make an OC kernel *cries*
Herpderp DXKPB.
Click to expand...
Click to collapse
Nobody is perfect
Is there some kernel for stock rom without oc, same speed and tweaks like oc b83 kernel but without bugs? Some stable kernel for everyday use with improvements?
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
CF-ROOT b83
Herpderp Adreno + Tegra.
Click to expand...
Click to collapse
Is this kernel stable?
Hi Guys,
First of all, i have used the search button to get my answer. But still couldnt find answers for all questions. So i thought i will post it here.
1. Does Darktremours a2sd comes pre-intalled with jusada's roms ? If not, can we install it separately ? If yes, where can i get it ?
2. Which is the best combination among the following ?
-- ICSSunday Final(with tweaks) with SlaidFastMod
-- ICSSunday Final(without tweaks) with SlaidFastMod
-- ICS2 with SlaidFastMod
-- Any other combo ???
3. Can we use swap partition on Ace ? What is the best swappiness value according to you ?
Wish I could help but I really haven't tried that ROM much. But at least I'll bump your question up...
Sent from my GT-S5830D using xda premium
1- dont really know. but if its not, yes u can install it manually. download script from here, put in root of sdcard, reboot into recovery, mount system partition, and flash it. finally read this for list of its commands.
2- not really sure. just try them all and stick with the one u like.
3- all of those jusada's ics u mention is based on cm7, which already had zram compcache. its similar to swap in a way. but if u use stock rom, cfroot kernel had swap function. just need to partition sdcard manually and activate it urself.
I like ics2 than ics final.
Now if you want to choose then choose ics without tweaks it is better than ics with tweaks.I have tried both.
If I helped you In any means hit thanks button.....
Hi,
I like Icsunday final (without tweeks) and LagfreeV1 script. Additionally set CPU govenor to “smartass“ and minimum CPU frequency to 245 to avoid the unlock lag.
I am absolutely happy with these settings
Gesendet von meinem GT-S5830 mit Tapatalk
Thanks a ton Guys,
Here is what i did.
I tried both ICS final without tweaks and ICS2. I didnt like the look of ICS2. So i switched to ICS final without tweaks.
I installed a2sd as described by an0nym0us_. Works flawlessly. Moved the dalvik cache to sdcard set zipalign on boot.
Installed lagfreeV1 script.
Tried Chainfire3D. It screwed my phone. So had to repeat the above steps again
P.S. Now i have taken Nandroid backup
Now planning to use SetCpu instead of OC options in CM CPU governor.. Because when i tried to set OC using CM, my phone rebooted randomly.
Anybody tried to use swapping on Ace ? Did you use A2SDGUI or any other app to activate swap ? I have swap partition in my droid and I used it when i had FirstUA1.2 ROM.
EDIT: Guys. Just found out the problem for random restarts was not ChainFire . It was a2sd !! Trying link2sd. Will let you know how it goes.
I tried swapping before ICSunday - with swapper 2 on cm7.1. But I was not happy with that.
I never knew why, but my phone is much faster now without swapper.
Sent from my GT-S5830 using Tapatalk
*************************
ICSunday Final
Lagfree V1
Hi gang,
Is there any stable bug free oc kernel available for our galaxy ace running on cm7.1?
I tried blackhawk kernel last night. However had issues with superuser, wifi and ext4 partitions.
Please help with links if u know of any such kernel.
Many thanks in advance.
-Nisha
Try cm7.1 OC kernel from ketut...
nishantmnit said:
Hi gang,
Is there any stable bug free oc kernel available for our galaxy ace running on cm7.1?
I tried blackhawk kernel last night. However had issues with superuser, wifi and ext4 partitions.
Please help with links if u know of any such kernel.
Many thanks in advance.
-Nisha
Click to expand...
Click to collapse
Hi @Nisha...
I have used both of @ketuts OC kernels without issue... "Blackhawk" kernel is reported to be the most stable, however I find that I get the same stable environment using the original OC kernel & a higher clock speed (check my sig for details).
Here is the link for the Original OC Kernel (@[email protected]) : http://www.mediafire.com/?yb4g7mzgysc36bw
Flash this using CWM5 preferably & vital if you are running CM7.2 builds or you may encounter issues after flashing...
The changes in the new "Blackhawk" kernel are quite extensive. They involve a complete Backport of the GPU driver to a better performing driver, Framework modifications & a complete re-write of the kernel source code... The down side of this new kernel is that @ketut has now limited the OC frequencies to a max of 902mhz... This is one of the reasons why I am still using the original kernel over the new one... I have got 921mhz stable which is higher than the new kernel will allow, so using the new kernel would be counter productive from my perspective...
Give this kernel a run & see how you go...
FYI : Make sure that you update CWM to v5. Contrary to a few reports, this CWM is stable... I have used it for the last 3 months, all options & functions work correctly & I have had absolutely "No" issues... It is also needed to correctly flash the new roms (7.2 etc.)
Stay Breezy n Be Lucky...
Pe"ACE"...
Thanks reaper, can u plz help me with two more things
1) link to stable blackhawk kernel. I am currently using zimage kernel. And no offence to developer but it sucks sometimes. Cant really see any cpu freq being used between min and max cpu freq.
2)link to cwm5.
Many thanks in advance dear.
-Nisha
ReaperXL2 said:
Hi @Nisha...
I have used both of @ketuts OC kernels without issue... "Blackhawk" kernel is reported to be the most stable, however I find that I get the same stable environment using the original OC kernel & a higher clock speed (check my sig for details).
Here is the link for the Original OC Kernel (@[email protected]) : http://www.mediafire.com/?yb4g7mzgysc36bw
Flash this using CWM5 preferably & vital if you are running CM7.2 builds or you may encounter issues after flashing...
The changes in the new "Blackhawk" kernel are quite extensive. They involve a complete Backport of the GPU driver to a better performing driver, Framework modifications & a complete re-write of the kernel source code... The down side of this new kernel is that @ketut has now limited the OC frequencies to a max of 902mhz... This is one of the reasons why I am still using the original kernel over the new one... I have got 921mhz stable which is higher than the new kernel will allow, so using the new kernel would be counter productive from my perspective...
Give this kernel a run & see how you go...
FYI : Make sure that you update CWM to v5. Contrary to a few reports, this CWM is stable... I have used it for the last 3 months, all options & functions work correctly & I have had absolutely "No" issues... It is also needed to correctly flash the new roms (7.2 etc.)
Stay Breezy n Be Lucky...
Pe"ACE"...
Click to expand...
Click to collapse
Wifi is not working after flashing this.please advise reaper.
-Nisha