Hello everyone first of all srry about my english.. I have a big problem with my phone, i think that i full bricked it. i was unlocking the BootLoader but i comited a several mistake with the msm7227 tool and my phone just turned off.. and now i cant turn the phone on. i even tried to turned on in flash mode but still not working, i dont know what to do im starting to thinking that the only solution is the JIG tool but it cost a lot for me.. PLEASE HELP ME IF U CAN..
Again sorry about my terrible english. thanks.
if your phone still under warranty u r so lucky..
if not u hae to throw your money away..
Do the same as on the picture. Try to replug your battery's cabel into phone, then power on your phone.
Mrakoris/ said:
Do the same as on the picture. Try to replug your battery's cabel into phone, then power on your phone.
Click to expand...
Click to collapse
Thank you, but ive the mini pro..
try this..
remove the batery for about 10-15 second, insert it back but DONT turn on your phone..
Put it for charge for a while (15 mins should do)
then, get one of the default 2.1 roms from this thread
Use flashtool and flash the firmware u downloaded above....
does it work?
Try flash se rom by SEUS. I had the same problem. FlashTool and others don't work for me but when I tried SEUS.. I get my Mini back
Sent from my U20i using xda premium
Related
I can't turn on my X10.When i press the on button,it's only vibrate a bit then nothing happen.No light is on even when i plug in.More over,when i plug in the press the on button,it won't even vibrate like without cable.
Please help me
Have you tried to re-flash it with the 2.1 or 1.6 FW with Bin4ry's flasher?
Which device do you have? A generic one or developer phone?
i'm having the generic one and i just update it to 2.1 this monday.
It won't seem to have any power goes in when i plug in.How i'm going to reflash it anyway? please help me
shinnie88 said:
How i'm going to reflash it anyway? please help me
Click to expand...
Click to collapse
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Thank you so much.My fone turned on again.By the way,should i change back to global generic or just leave it as nordic?
shinnie88 said:
Thank you so much.My fone turned on again.By the way,should i change back to global generic or just leave it as nordic?
Click to expand...
Click to collapse
Nice 1. It's totally up to you, I've stuck with the Nordic for now.
My phone went off again.This times also can't turn on or charge.But when i hit the on button,itz flash red 3x then went off.Anyone know what happen? please help me
X10 only vibrate
Same problem here X10 only vibrates,
i tried flashing bin4ry way it stops at around 75%
Tried even in sonyericsson update service but still no luck
It also stops around 25%, my phone is generic & my battery
Is fully charged any ideas?
Pls help
I have the same problem if I flash a firmware using FlashTool. I am stuck at 1.6 and I can't install any other firmware because I can't turn it on. Only firmware that works is the one from ROOT_F3V3 but it is a 1.6 firmware
If you find a firmware that works please post it.
Try downloading the latest Flashtool and then flash the latest firmware available; http://forum.xda-developers.com/showthread.php?t=936733
Its happened before. The phone will not boot, I waited several hours and ... it was working again, but I do not know why
Try to connect into flash mode and install SE original ?
Ok, i had to do this twice now, as i bricked it a couple of weeks ago
you'll have to reflash with sony ericsson update service here:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
Follow the instructions and press the back button before plugging in the cable.
Download the software and keep in mind that playing around with roms will result in these problems so don't go too far.
1. Take your battery out.
2. Hold the back button. Make SEUS running and ready.
3. Plug it into the computer.
4. Put your bateery back in.
Follow the instructions. Hopefully it would work and good luck
If it worked dont forget to hit thanks button.
Sent from my X10i using XDA Premium App
ty so much JingleJo, your method worked for me
XperienceD said:
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Click to expand...
Click to collapse
Man plzz help me i'm a noob in this things i have the same problem with that guy but i dont know how to reflash my phone :S where can i take the 2.1 :S i dont know nothing :S:S
---------- Post added at 10:26 AM ---------- Previous post was at 10:20 AM ----------
XperienceD said:
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Click to expand...
Click to collapse
Plzz help me i have the same problem :S but i dont know how to reflash my x10 :S i dont know where can i take the 2.1 plzz can u tell me with a video or with steep :$ like baby plzz
My xperia arc went dead after trying to upload OTA update, yeah i know i shouldn't have but i guess it too late now. however i will like any help as to how to revive my phone. the charging light even don't turn up.
Pls anyone, I'm desperate
PS:the phone was unlocked
download the generic 2.1 firmware and save as in flashtool/firmwares.
Put yout phone in flashmode and flash back to 2.1....
Sent from my SO-01C using xda premium
Pc companion to 2.3 then do ur thing..like modding and stuff
Sent from my SO-01C using xda premium
I was reboot my phone and once he do this:
Screen out (duh) screen on with ''Sony Ericsson'' then he still stay
on that, idk dont know why.
I have reinsert my battery i have used the right and left button`s.....
So, if someone can help me with a other option, please help me...
Very Thanks alot!!!...
x10i-user said:
I was reboot my phone and once he do this:
Screen out (duh) screen on with ''Sony Ericsson'' then he still stay
on that, idk dont know why.
I have reinsert my battery i have used the right and left button`s.....
So, if someone can help me with a other option, please help me...
Very Thanks alot!!!...
Click to expand...
Click to collapse
try using flashtool. directions are in the link.
U mentioned you have a x10i correct, then pick the firmware you want with the x10i with the latest baseband. if you still have questions, keep asking.
rooting is next if you go that route then, flashing ROMS, which are associated with a baseband
here is the link for flashtool: http://forum.xda-developers.com/showthread.php?t=920746
Yeah dude, use flashtool.... just flash it back... tht worked for me... i bricked my phone once.... now its rollin again....
how long did you leave it on the SE screen for?? sometimes mine takes a minute to boot through that?
im_iceman said:
how long did you leave it on the SE screen for?? sometimes mine takes a minute to boot through that?
Click to expand...
Click to collapse
ummmmh, more then 24 hours... :S
but i gonna try Flashtool right now, i hope i will work.
you could also just repair it using SEUS... depends if you want to root and install custom ROM's etc..
im_iceman said:
you could also just repair it using SEUS... depends if you want to root and install custom ROM's etc..
Click to expand...
Click to collapse
ok, i`ll try...
i can`t place my phone in Flashmode he gonna automatic to the Sony Ericsson logo...
What did i wrong?...
fire up SEUS, get to the bit where it say to connect your phone.
take the battery out for 10 seconds or so..
plug the micro USB cable into your phone only..
hold the back key (and keep it held until SEUS tells you to release it later in the process), push the battery back in
push the USB cable into your PC.
Should boot up into flash mode and SEUS will do it's thing!.
Done it before
Hi mate done it today since im new at rooting if you were trying to install a theme or rom, you might not have their firmware, if this is the case then you just from that Sony Ericsson screen keep pushing the Back or <-- key, this will boot you into xrecovery and just restore... if you havent made a back up, then you could try replace the rom you have back with the Se offical 2.1 rom which you can find in Android dev. and just launch it back with that... Hope this worked!!
hi..i did sumthing silly!! was going to flash a custom 2.2 rom but i ripped out the battery thinking that i could stop the installation process coz i forgot to wipe the caches...now the thing's stuck at the logo screen...anyone can help me???? cannot even access xrec anymore...
doggybone said:
hi..i did sumthing silly!! was going to flash a custom 2.2 rom but i ripped out the battery thinking that i could stop the installation process coz i forgot to wipe the caches...now the thing's stuck at the logo screen...anyone can help me???? cannot even access xrec anymore...
Click to expand...
Click to collapse
Plug your phone into the computer and reflash with SEUS. I believe thats your only choice now.....well that and the flashtool.
yup...trying to use the flashtool now...downloading the latest one so hopefully can use a generic rom / install the xrecovery via flashtool first...
but i am still downloading it....bloody connection is so slow here...
Thanks!
Thankfully, you can't actually brick this phone unless it has real hardware failure. All you gotta do is remove the battery (to get it to turn off), then put it back in like 30 seconds later, hold the back button while plugging in usb, then you are in flash mode to install whatever rom you'd like with seus or flashtool
it's alive!!! ahahahahaha...thanks!
so this means it is QUITE the unbrickable!!
unbrickable x10... until u stomp on it .... hahahahaha
Hi there. First of all, sorry about my english, but i'm spanish
I was reading a lot, and i cant find a solution to my phone. It sudently becomes a brick just when charging (with anothers phone charger) and the battery was lower than 10%
It doesn't work, and don't response to any of all solutions i've read (Take out SIM, SD card, remove battery and wait... ) no way... Screen never come back to iluminate again. Just, when pushing power buttom, the phone's vibrates.
So tired of the brick, i've arrived at this page. And I read this post:
http://forum.xda-developers.com/showthread.php?t=1568792
And try to become my phone back...
At least, the phone enter in flashmode, and i can flash with flashtools... but the phone never come back... just the brick
I tryed to flash with the Xperia_2011_FreeXperia_ALL.ftf file and OK
Afther that, take out the USB and flash again with one ROM i get from here:
Xperia Mini Pro (SK17i)
4.0.2.A.0.42 - http://www.mediafire.com/?hevz3x5w9pqt24q
4.1.B.0.431 - http://www.mediafire.com/?j0bdx06zz5skvzt
But the phone never works. One time afther flashing with 4.0.2.A.0.42 i noticed, that trying to power on the phone, the red led shyne 3 times, and thats supposed to be the battery. But i don't know if the battery now is charged. I've left it hours charging, and hours too to the USB...
Supposedly, i cant flash without battery in the phone, but flashtools finish correctly
So... any idea?
There is something i can do?
Thank all of you who read this!
Its probably battery empty. recharge battery or get a friends and try
Sent from my X8 using Tapatalk 2
First make sure that your battery is really fine. Try another one.
If that fails, see if you can get your device into flash mode?(Switched off+Vol Down + USB cable)
If yes, try flashing a custom ROM. For example, download CyanogenMod from here, use Flashtool (guide) to flash the kernel provided in the downloaded ROM's ZIP file. Then, boot again into Clockword Mod Recovery(Keep pressing Vol DOwn button while boot or google for how to enter recovery for your phone). Copy the downloaded Cyanogenmod ZIP to SD card and install it via ClockwordMod recovery.
See if the above works.
bandarigoda123 said:
Its probably battery empty. recharge battery or get a friends and try
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Milven said:
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Click to expand...
Click to collapse
Try booting up your phone with the USB connector plugged in the PC (maybe it will charge the battery then)
Milven said:
But, if it was problem of battery, i suppose, that i can't finish flashing with flashtoolts. Not?
Click to expand...
Click to collapse
At least my phone (LWW WT19i does not work without the battery with Flashtool. I'm not sure about your device.
Anyway try flashing a custom ROM like I said. Try unlocking bootloader first though from here
U said that red light show when try to on the phone.
Just try another battery.. It should work
Sent from my X8 using Tapatalk 2
You said LED blinks 3 times so if the color of LED is RED then it indicates empty battery..
Hey, my problem wasnt the same as yours, but it helped for me when i got only service logo on screen.
On this link you find a "Play_v1.01_TA brick fix UPDATE" zip.
Download, unpack and flash it.
http://forum.xda-developers.com/showthread.php?t=1126358&page=10
I hope it will help u.
Milven said:
Hi there. First of all, sorry about my english, but i'm spanish
I was reading a lot, and i cant find a solution to my phone. It sudently becomes a brick just when charging (with anothers phone charger) and the battery was lower than 10%
It doesn't work, and don't response to any of all solutions i've read (Take out SIM, SD card, remove battery and wait... ) no way... Screen never come back to iluminate again. Just, when pushing power buttom, the phone's vibrates.
So tired of the brick, i've arrived at this page. And I read this post:
http://forum.xda-developers.com/showthread.php?t=1568792
And try to become my phone back...
At least, the phone enter in flashmode, and i can flash with flashtools... but the phone never come back... just the brick
I tryed to flash with the Xperia_2011_FreeXperia_ALL.ftf file and OK
Afther that, take out the USB and flash again with one ROM i get from here:
Xperia Mini Pro (SK17i)
4.0.2.A.0.42 - http://www.mediafire.com/?hevz3x5w9pqt24q
4.1.B.0.431 - http://www.mediafire.com/?j0bdx06zz5skvzt
But the phone never works. One time afther flashing with 4.0.2.A.0.42 i noticed, that trying to power on the phone, the red led shyne 3 times, and thats supposed to be the battery. But i don't know if the battery now is charged. I've left it hours charging, and hours too to the USB...
Supposedly, i cant flash without battery in the phone, but flashtools finish correctly
So... any idea?
There is something i can do?
Thank all of you who read this!
Click to expand...
Click to collapse
Hi Milven,
I got the same problem with you yesterday. Few hours sitting in front of my PC and hopeless.
I tried everything same as yours, finally I found and solve the case.
Install this http://www.sonymobile.com/global-en/tools/update-service/
And let it update your phone.
Done. It's back to brand new.
Hope you read this.
frdnoer said:
Hi Milven,
I got the same problem with you yesterday. Few hours sitting in front of my PC and hopeless.
I tried everything same as yours, finally I found and solve the case.
Install this http://www.sonymobile.com/global-en/tools/update-service/
And let it update your phone.
Done. It's back to brand new.
Hope you read this.
Click to expand...
Click to collapse
That's true. Try fixing it by using sony repairment. I did it and it worked for my phone. I hope it does for you
Sent from my Xperia, Asri Aisyah El Zahra
i've the same problem as you. charge your battery with desktop charger. not too long, i put the battery and flash firmware in flashtool. and it work. when the flashing done and the device on, my battery just 3% lol. flashing with flashtool only takes a few minutes
Hey i Need Help! :crying:
I Hard Bricked My xperia mini pro,
I Change the imei number on the phone (i know its iligal) with octopus, i turned it on and was working great, but after 15 minutes it started turning off every minute. I tried reflashing it but after 5 times trying to flash it now i cant get "flash mode" (green led) to work, when i connect to pc i dont get nothing no even "unknow device" all i can get is test point is there any way to get it back working
PD: The bootloader wasnt unlocked its locked, i already tryed unlocking it but no luck! :crying:
sorry my english is bad
Changing IMEI will always have a great big risk...my only supposed answer for your problem is to send it back to service
Sent from my LT28h using xda premium
Change imei? Why did you do that?What for?
UchihaDareNial said:
Changing IMEI will always have a great big risk...my only supposed answer for your problem is to send it back to service
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
Use Sony PC Companion 2.1 for flashing & updating rom originaly
I hear so many times about restarting every 15 minute, and the problem is IC power brick, u need to change u'r phone I guess :crying: