Related
I paired up my Note with my new Belkin A2Dp Car kit and found that I am not able to control the bluetooth volume for the phone/voice profile.
Voice input sounds distorted as does any voice going out to the speakers. In calls the person I am calling sounds distorted and they say I do also. Obviously voice commands are useless as the phoe cannot identify what I am saying properly due to the distortion.
It's as if the mic-boost is blasted all the way up for the voice call bluetooth profile, is this the same issue of Samsung's crap BT stack that they never seem to fix?
I tried using an App called A2DP volume to force volume settings on connect but they have no effect on the BT in call volume, even the volume rocker on the phone does nothing during a call.
I dont see any volume or mic controls on my bluetooth device as it is a car-kit.
The music audio quality over A2DP is excellent and not distorted at all.
Joel
Anyone? Surely other people are using BT headsets and car kits with their note?
Crystal clear on my jaybird freedom bt headphones
Sent from my SAMSUNG-SGH-I717 using XDA App
00mred00 said:
Crystal clear on my jaybird freedom bt headphones
Sent from my SAMSUNG-SGH-I717 using XDA App
Click to expand...
Click to collapse
Yep the A2DP profile is clear and sounds great, as I said in my post, but the phone call profile is distorted and blown out, adjusting the volume on the phone seems to have no effect on this profile.
To clarify...no issues on mine. .phone calls included
griffindodd said:
Yep the A2DP profile is clear and sounds great, as I said in my post, but the phone call profile is distorted and blown out, adjusting the volume on the phone seems to have no effect on this profile.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I717 using XDA App
I had a similar problem with a Kenwood player once. I had to update the player from the Kenwood site to fix it.
I think it's a bit outdated, but did you manage to fix it?
I have this belkin device and the same volume call issue (can't use it for calling). Tried with the phones in my signature and with an iphone 4s and get this issue with both. Only with an iphone 3g I could control volume successfully. Maybe it's only compatible with apple devices. iphone 4 doesn't work because ios5 disabled bluetooth call volume control.
It's too disappointing..
Bluetooth Distortion
Hi there. I upgraded my SGS i9000 to Jellybean JRO03L recently - latest build is excellent. However, Bluetooth call quality is distorted as per Griffindodd but ADP2, although relative quiet is very good.
Can't figure out what options I have.
Have the same issue in terms of controlling car music volume on the dashboard, but haven't noticed call quality, just got the a2dp application and will let everyone know how it works
Update: didn't work, still can't adjust volume via dash
Sent from the Jelly Way Galaxy
still nobody has any solution for this?
Sent from the Jelly Way Galaxy
figured out a work around for myself, so I found that when playing through Apollo I could control the volume on dash but not while playing Pandora and others, so what ended up working is loading both, pausing Pandora, playing Apollo to get volume control, then holding down the back button to kill Apollo(make sure this is enabled in developer options in phone settings), then Pandora should start playing again all by itself and still have volume control.
Sent from the Jelly Way Galaxy
I have the A100 HTC Car StereoClip for streaming audio to my car stereo, but only the bluetooth profile is for "Media audio."
The device works great for streaming audio - it sounds just as good as a wired connection - but, it will not work for phone calls. When a call comes in, the "media audio" stops/pauses, then the call comes through the phone's speaker. With a wired connection using the physical headphone jack, the call will go through the car stereo and use the phone's microphone.
Is it possible to force a different profile for the A100 to do the same thing as the wired connection?
junkmail9 said:
I have the A100 HTC Car StereoClip for streaming audio to my car stereo, but only the bluetooth profile is for "Media audio."
The device works great for streaming audio - it sounds just as good as a wired connection - but, it will not work for phone calls. When a call comes in, the "media audio" stops/pauses, then the call comes through the phone's speaker. With a wired connection using the physical headphone jack, the call will go through the car stereo and use the phone's microphone.
Is it possible to force a different profile for the A100 to do the same thing as the wired connection?
Click to expand...
Click to collapse
I've been searching for this same exact question, but haven't found jack. Did you ever figure this out?
h41cyon said:
I've been searching for this same exact question, but haven't found jack. Did you ever figure this out?
Click to expand...
Click to collapse
Not yet. I haven't found any app or utility that will make the A100 work like a corded link for phone calls.
I am hoping the answer lies in the /system/etc/bluetooth/audio.conf file. I haven't really looked into it because root is needed to test anything there. I plan to resume looking into this once s-off is achieved.
any solutions as of yet????
optiknerv said:
any solutions as of yet????
Click to expand...
Click to collapse
Nothing as of yet. However, the answer is not in the audio.conf file.
Can anyone tell me where the system detects the headphone jack is inserted and then redirects the audio?
Go to the bluetooth settings for your device, you will see two different options "Phone Audio" and "Media Audio". If you only see "Media Audio" your A100 does not support the required bluetooth prodiles to handle phone calls.
These are two separate bluetooth audio profiles, HFP for phone and AVRCP/A2DP for media.
When a phone call comes in, the phone pauses the AVRCP connection for the duration of the phone call, and HFP comes on to handle the call.
This is the device I used for bluetooth media/phone calls in my older model car, nothing spectacular about it but it works decently for being a $40 unit.
Connects via wire/RCA jacks to aux port and needs to be hardwired into power though.
http://www.clarion.com/us/en/produc...es/BLT370/us-en-product-pf_1259392722474.html
Reading around ive abandoned the idea of finding a way to get this working on a2dp devices. Its just so stupid. All I want is to route the audio through the speakers, the microphone in the one x is close enough to pick up my voice. This is what I used to have when I hard wired the audio to my stereo in my car, and now with blutooth I can't.
optiknerv said:
Reading around ive abandoned the idea of finding a way to get this working on a2dp devices. Its just so stupid. All I want is to route the audio through the speakers, the microphone in the one x is close enough to pick up my voice. This is what I used to have when I hard wired the audio to my stereo in my car, and now with blutooth I can't.
Click to expand...
Click to collapse
Exactly. I haven't given up yet, but I agree that information on this is few and far between. Most info seems to be focused on redirecting all audio to mono SDP. With root, it should be possible somehow by re-routing the audio. I'm even ok if the music gets blended with phone audio - it might be annoying, but not nearly as frustrating as not getting phone audio via A2DP.
Sent from my Kindle Fire using Xparent Blue Tapatalk 2
any one have anything yet?
App soundabout
Sent from my ADR6410LVW using xda app-developers app
jose51197 said:
App soundabout
Sent from my ADR6410LVW using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, even SoundAbout can't force the phone audio over AD2P-only devices. I talked (well, emailed) with the author about it last December. He was very receptive to input and he even tried a couple things, but no joy.
This solution requires root and knowledge beyond me. Or, I need to buy an adapter that supports AD2P and SCO and has a microphone.
Ok with any other phone I have owned in the past I have been able to plug it in my aux jack in my car to stream music but use my BT to make/take calls. The music would pause during the call and when the call ended it would resume playing through the headphone jack.
The S4 refuses to do this, it is extremely a special kind of retarded.
I have researched CSC feature.xml and others/xml codes and build.prop
What is needed to make this work?
I dont want to use LINK as I feel it is just another layer added to what is not needed. I just want it to work like the GNex, N4, DX, Dinc, D1, D2, Charge, and all the other android phones I have owned in the past running both stock (rooted/unrooted) and CM based roms.
Anybody have an idea on what is needed?
What exactly is it refusing to do? Pause when you get a call? What music player (the player must respect the media intents to pause/mute and that has nothing to do with the phone/ROM in that respect).
If something is plugged into the headphone jack and I have a bluetooth device paired and on. When a call comes in it goes through the headphone jack and through bluetooth. If I unplug the cable from the headphone jack then it allows me to use bluetooth to take our talk on the call.
This is the only phone I have owned that does not allow me to pay music through the headphone jack and take calls through bluetooth without having to unplug the cable from the headphone jack.
Sent from my SCH-I545 using Tapatalk 4 Beta
I have the exact same issue with my Samsung S4 and have previously used the HTC Thunderbolt without any issue in my car the same manner.
Somehow the BT audio and mic becomes disabled during calls while the headphone jack is plugged in, if there is a way to enable this and disable audio from the headphone jack that would be the solution. So far I have not found a way to do this through any of the settings, very disappointing. It may need a programmatic solution unfortunately...
The sound quality from aux to bluetooth is minimal....why not just use bluetooth? Your making more work for yourself. You'll get calls...the audio will mute...then resume when calls end. I do this in my car...sounds and works just fine.
Sent from my SCH-I545 using Tapatalk 2
chrishoyt2012 said:
The sound quality from aux to bluetooth is minimal....why not just use bluetooth? Your making more work for yourself. You'll get calls...the audio will mute...then resume when calls end. I do this in my car...sounds and works just fine.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Guessing they don't have Bluetooth built into their cars. They are using a headset for calls and an aux jack for music.
Sent from my SCH-I545 using xda premium
Exactly... If u wanted my calls to route through my car I would not mind this. I take my calls privately and thus why I do it this way. I know I can setup multiple bluetooth devices and disable phone on one of them. But I have not found a bluetooth adapter to my liking yet.
Sent from my SCH-I545 using Tapatalk 4 Beta
Bluetooth not working correctly
This is definitely a bug on the s4. In the car I have Bluetooth and an aux Jack. The phone connects fine to Bluetooth and works as long as I'm not using the aux to play music in the car. If I'm listening to music through the aux/headphone jack and I get a call. Bluetooth recognizes the call, music on the phone stops playing, but when I answer, I cannot hear anything. If I unplug the headphone jack I can hear the call. This has been tested on different cars, different roms including stock, and always worked fine on previous phones. Can anyone help? It's easy to reproduce, not sure why more people haven't noticed.
Unfortunately, from what I read somewhere, this isn't a bug, it was intentional by Samsung.
I'm in the same boat, I use BT for my calls in the car, but the headphone jack for music out. If there's a cable plugged in, you can't even manually force a BT connection, it's grayed out and unavailable. Unplug the jack, and BT kicks in and picks up the call. Very inconvenient to say the least.
Any way around this?
I also have a question about how the Samsung will work with this in mind. In the past I have used a Motorola cable that has a micro usb plug on the phone end, and a full size usb and a 3.5mm aux out jack on the other. It allowed me to charge the phone and take the music out when docked in the car. Would this work with this phone? Has anyone tried it yet?
Here is a link to the cable I'm talking about.....
http://www.ebay.com/itm/Motorola-Ca...c-3-4-Atrix-Photon-Q-/360549195891#vi-content
MonkeyTime said:
Unfortunately, from what I read somewhere, this isn't a bug, it was intentional by Samsung.
I'm in the same boat, I use BT for my calls in the car, but the headphone jack for music out. If there's a cable plugged in, you can't even manually force a BT connection, it's grayed out and unavailable. Unplug the jack, and BT kicks in and picks up the call. Very inconvenient to say the least.
Any way around this?
I also have a question about how the Samsung will work with this in mind. In the past I have used a Motorola cable that has a micro usb plug on the phone end, and a full size usb and a 3.5mm aux out jack on the other. It allowed me to charge the phone and take the music out when docked in the car. Would this work with this phone? Has anyone tried it yet?
Here is a link to the cable I'm talking about.....
Sorry,I haven't tried that cable. Do you know why Samsung is doing that? I've had multiple phone including the galaxy nexus by Samsung abd never had this issue.
Click to expand...
Click to collapse
Can't just deselect the "media" (a2dp) profile for your vehicle?
Sent from my device that can send.
I just noticed the same issue with my aux plugged in for music and BT for phone and received a call but could not hear anything. Could make and end calls but no sound in my car.
Seems like both get disabled when a call comes in and the phone is paired. Unplug the aux and BT works for calls fine.
I did some research and ending up purchasing Sound About Pro from the market for $2.99 and it solved the problem. It lets you force the calls to BT or AUX for that matter.
And yes, it still pauses the music and resumes when call is done.
$2.99 to fix a Samsung problem stinks but it works now
NilsP said:
I just noticed the same issue with my aux plugged in for music and BT for phone and received a call but could not hear anything. Could make and end calls but no sound in my car.
Seems like both get disabled when a call comes in and the phone is paired. Unplug the aux and BT works for calls fine.
I did some research and ending up purchasing Sound About Pro from the market for $2.99 and it solved the problem. It lets you force the calls to BT or AUX for that matter.
And yes, it still pauses the music and resumes when call is done.
$2.99 to fix a Samsung problem stinks but it works now
Click to expand...
Click to collapse
i know this is an old thread but i first want to say THANK YOU! ive been looking for a solution for this issue for a long time..
if you dont mind...could you tell me what your settings are?
i got it playing through bluetooth with headphones plugged in but sometimes, later on when plugging head phones in again, it will play through speaker unless i turn soundabout off via its widget
djcyph said:
i know this is an old thread but i first want to say THANK YOU! ive been looking for a solution for this issue for a long time..
if you dont mind...could you tell me what your settings are?
i got it playing through bluetooth with headphones plugged in but sometimes, later on when plugging head phones in again, it will play through speaker unless i turn soundabout off via its widget
Click to expand...
Click to collapse
I took all the defaults and just turned off A2DP
NilsP said:
I took all the defaults and just turned off A2DP
Click to expand...
Click to collapse
so with the defaults and A2DP turned off you can make your calls without unplugging cable...and do you use widget to turn it on and off or does everything else work normally with it on as well? i had phone call audio set to force bluetooth and sometimes after unplugging aux cable then going to headphones it would play through speaker until i switched widget off...will try with defaults when in car again, just curious how it works with you..
thanks
djcyph said:
so with the defaults and A2DP turned off you can make your calls without unplugging cable...and do you use widget to turn it on and off or does everything else work normally with it on as well? i had phone call audio set to force bluetooth and sometimes after unplugging aux cable then going to headphones it would play through speaker until i switched widget off...will try with defaults when in car again, just curious how it works with you..
thanks
Click to expand...
Click to collapse
Correct. All works like it should until you force something. As a matter of fact just try it without changing anything. I let app decide
NilsP said:
Correct. All works like it should until you force something. As a matter of fact just try it without changing anything. I let app decide
Click to expand...
Click to collapse
thanks bud...will try
update...seems to be working great with default settings...didn't even have to purchase premium, think i might just because i was about to buy a bluetooth transmitter to fix this
I tried sound about and one problem I'm having is when using headphone jack for music and bluetooth for calls it won't play audio for voice dialing through bluetooth but once you make the call it goes to bluetooth. I use Google for voice dialing much faster than svoice. Seems like the first time it works then later after playing music it doesn't. Any setting I should change in sound about
Sent from my SCH-I545 using Tapatalk
I updated to oc1 with nk4 boot loader and now the headphone jack doesn't disable Bluetooth. Sweet.
Sent from S4 using the better than it was then they jacked it again Tapatalk
I am currently running cm11(12/17) and am using an LG Tone+ bluetooth headset. Is there a way or am app that will let me customize the bluetooth settings so my phone's speaker will ring so well as the headset? Currently it will only ring on the headset. Also, I would like media to automatically play out of headset jack instead of bluetooth (I hook my car stereo to the headset jack and have to manually disable media in the bluetooth settings for this to work). If I could just be pointed in the right direction I can probably figure it out.
Sent from my EVO using Tapatalk
I got some new true wireless earbuds and the audio quality is great for music, and the microphone quality is actually great when recording something like a voice note. But as soon as you use both the audio and mic at the same time, both suck.
So is it possible to use the headset in stereo just for the audio and the phone's regular microphone during calls? I've been looking around for the last hour or so and can't seem to find anything. No apps, no settings, no developer options. As soon as I turn off calls on the device it just uses the phone's speakers and mic.
ScottyDoesKnow said:
I got some new true wireless earbuds and the audio quality is great for music, and the microphone quality is actually great when recording something like a voice note. But as soon as you use both the audio and mic at the same time, both suck.
So is it possible to use the headset in stereo just for the audio and the phone's regular microphone during calls? I've been looking around for the last hour or so and can't seem to find anything. No apps, no settings, no developer options. As soon as I turn off calls on the device it just uses the phone's speakers and mic.
Click to expand...
Click to collapse
To be honest ... IDK.
On some devices, you can set another audio device for a special app.
Settings - Sound and vibration - Separate app sound
I just tried it with bluetooth speakers and the phone app, but was not successful. Maybe it works for you.