Hey ppl..
I just flashed Hyperdroid v5.5.21 on my GT-I9100 and it really worked like a charm until i flashed docs mated black surgeon over it and restarted it once.. now i cant access my internal sdcard, when i connect it to a pc with a usb cable, it does not mount anything and i also do not have any access to any of my data with my files browser.
Now everytime i flash the surgeon over the system, i do have full access on my files but as soon as i do restart my phone (regardless of which kind of restart i choose, meaningly recovery download or normal) i loose access to them.
CWM 5.0.2 also cant mount the sdcard or usb storage and comes up with a failure message about cant mount /sdcard and something about.. Unable to open ums lunfile (No such file or directory)when trying to mount the usb storage but i do not think that it is directly related to the rom..
please help me, because i really want to use that rom cus it kicks ass but if that issue continues, i will have to go back to lightening or something like it.
Ive asked the same question over at the androidmeda forum. Pongster said that the file 01efs in /system/etc/init.d should be removed. It worked! So if anyone else gets this fail.. Just remove that file.
Sent from my GT-I9100 using XDA App
Related
Phone got disconnected improperly when transferring files from my laptop in USB mode. Long story short I have tried many different files thru Odin but only Eugene_2E_JK2_Froyo.tar.md5 is the only one that allows my phone to work but I have no access to download any files as my internal card is not being recognized by phone or any computer I hook up phone with and yes I have the correct drivers and yes ADB does work.
When I go into recovery I see the message:
Moviand Checksum Conformatyion Fail
E:Can't mount /dev/block/mmcblk0p (or /dev/block/mmcblk0)
(no suc file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed
Please help and tell me some way to fix
try a different computer? or format the drive?
Need to format internal storage i believe
Sent from my MIUI.us Sensation 4G using XDA App
Not able to format the internal drive. Thru settings nothing happens and phone not recognized when i plug into pc.
You might google eugenes froyo that will not brick, I have to use it to flash from eclair to froyo almost every time, follow the op. It will take you back to recovery, then use command or battery pull to reboot. Hope this helps.
Can you even get into download mode?
Sent from my SGH-T959 using XDA App
logikism said:
Can you even get into download mode?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yes i can get into download mode. Yes I have tried to use Eugenes no brick froyo but when I then try to download to stock I am not able to get past the boot screen. I think it has to do with something with the internal drive corrupted. any ohther suggestions?
rakishaj said:
Phone got disconnected improperly when transferring files from my laptop in USB mode. Long story short I have tried many different files thru Odin but only Eugene_2E_JK2_Froyo.tar.md5 is the only one that allows my phone to work but I have no access to download any files as my internal card is not being recognized by phone or any computer I hook up phone with and yes I have the correct drivers and yes ADB does work.
When I go into recovery I see the message:
Moviand Checksum Conformatyion Fail
E:Can't mount /dev/block/mmcblk0p (or /dev/block/mmcblk0)
(no suc file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed
Please help and tell me some way to fix
Click to expand...
Click to collapse
happened to me too, i followed these steps to make it work again http://forum.xda-developers.com/showthread.php?t=1447303
Can no one in the entire community help me on this? I have a Samsung Vibrant that I can't download anything as my phone says it has no memory and I cannot flash anything as I get error messages when I go into recovery. I have no apps nothing!!! All I have is a phone that can text, make calls and surf the web. I'm stuck with a phone that has the capabilities from like 10 years ago
rakishaj said:
Can no one in the entire community help me on this? I have a Samsung Vibrant that I can't download anything as my phone says it has no memory and I cannot flash anything as I get error messages when I go into recovery. I have no apps nothing!!! All I have is a phone that can text, make calls and surf the web. I'm stuck with a phone that has the capabilities from like 10 years ago
Click to expand...
Click to collapse
I think I had the same problem and trying to follow the directions I found the XDA didn't help. I was actually able to boot using the Eugene No brick FROYO but it still showed my internal memory as being unavailable. See my thread here: http://forum.xda-developers.com/showthread.php?t=1637508
I gave up and sent it to Samsung. I just checked the status today and they had to replace the motherboard.
Check out for first post and try to format the internal memory. If you have the same problem as me and can't find the internal memory, you might be out of luck my friend.
chasin
I am unable to copy files to my internal storage. Is it a waste space which I cannot use! Please help.
Did you flash new ROM?
Can you be a bit more unspecific?
And by all means, do not tell us what happens when you try to copy a file onto the internal storage, especially keep an error message you might be getting secret, no one must know!
And most of all, never tell if you're not able to copy from the PC via USB or on the phone with a filemanager app.
It is working with FTP or using Wifi File Explorer only.
But not working with normal kies mode or usb debugging mode.
Isn't it possible to browse the external SD card from a PC (connected USB) while the phone is in Recovery mode?
When I mount /sdcard via CWM and connect my PC, I get a "Found New Hardware Wizard" dialog box on my PC. I have the Samsung drivers installed and they work properly when the phone is booted but when I enter Recovery mode via CWM, my PC starts asking about installation CDs...
I also tried mounting the USB storage but I get "Unable to open ums lunfile (No such file or directory)
I never came across that option in cwm, and coming from among ra it was disappointing.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
First and last bump
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I never got any form of mounting working in CWM.
TWRP on the other hand works like a champ.
Even without USB mounting, TWRP beats CWM for me.
I also could never get my phone to mount correctly in CWM recovery. Tried USB, sd card, and emmc in every combination. Most likely this is why you never got a response because nobody has it working.
Hey,
I've flashed Omega 33.2 and Siyah 1.8 kernel.
I used 5.5.0.4 CWM recovery (didn't change the recovery, just flashed Omega and right after Siyah).
I then flashed something from Omega kitchen that I guess made some problems with the ROM, so I got in a bootloop. Not a problem - I will just flash the rom again and everything will be ok, but unfortunately I deleted the rom from my phone memory. In those situations I just go inside recovery and mount the sdcard, so I went into mounts and storage -> mount /sdcard, I connected to my computer (windows 7) but nothing happened. So I tried to install kies, but it didn't help too. I also tried the same in Ubuntu (maybe it's mass storage and not MTP because from what I know linux doesn't support MTP), but it didn't worked.
I end up taking my external sd card, putting the rom on it, and flashed the zip from the external sd card.
I don't want to do it every time I want to put something in my phone through recovery. How can I fix this problem? (Yes, I tried more than one USB slot and cable).
Thanks in advance!
TRY
http://forum.xda-developers.com/showthread.php?t=1943592
jje
JJEgan said:
TRY
http://forum.xda-developers.com/showthread.php?t=1943592
jje
Click to expand...
Click to collapse
Thanks for your reply.
Tried TWRP, CWM touch 6, but it didn't work. I tried to mount external sd card and it didn't work also. Tried windows7, ubuntu (I think it's mass storage so it should work), and another computer with windows7, but didn't work in neither of them.
Also, tried 'adb devices' when the phone is plugged in in recovery and it didn't see the device too. Does adb suppose to work when I'm in recovery? (I'm developing Android apps so I'm sure that adb is 100% working when the phone is on).
In CWM 6, I press mount /sdcard and after I press the text is still mount /sdcard (doesn't change to unmount), and when I press mount /ex-sdcard it change to unmount /ex-sdcard but doesn't appear on the computer also.
Does anybody else is facing the same problem? very annoying :S
Nobody faces this problem too..? :/
same issue here!!! trying to get some help as I don't have an SD card available right now
I've recently flashed my phone with Nemesis kernel using Flashtool, and installed "MoonBreaker 3.5". Unfortunately it is horribly, horribly broken so I have tried to do a full wipe and reinstall. This also failed to work, and somehow wiped my internal storage, so now I have no kernels or roms available on this phone.
The phone boots, but the market doesn't work, downloads app doesn't work, there is no file explorer and no network connection. The phone will not mount as usb storage when booted, or when in CWM recovery. When booted it gives me an "MTP USB Device - Failed" message after attempting to install drivers (win7 and winxp). When in CWM it does nothing at all.
Therefore my question is, how on earth do I get files onto my phone now?
idbx said:
I've recently flashed my phone with Nemesis kernel using Flashtool, and installed "MoonBreaker 3.5". Unfortunately it is horribly, horribly broken so I have tried to do a full wipe and reinstall. This also failed to work, and somehow wiped my internal storage, so now I have no kernels or roms available on this phone.
The phone boots, but the market doesn't work, downloads app doesn't work, there is no file explorer and no network connection. The phone will not mount as usb storage when booted, or when in CWM recovery. When booted it gives me an "MTP USB Device - Failed" message after attempting to install drivers (win7 and winxp). When in CWM it does nothing at all.
Therefore my question is, how on earth do I get files onto my phone now?
Click to expand...
Click to collapse
What model of phone do you have? I had the same problem with the Sola (I insanely forgot copy .zip on sdcard before flashing bootloader) and i solved copying the archive on external SD then with CWM selecting Install zip from external sd. Of course this method is not valid if you have Xperia U. In this case or in another case where you haven't any external SD slot try reading this guide.
I have an Xperia P, sorry the forum denied my edit for some reason. Thanks for your ideas!
I've had some success booting into fastboot then, while it's connected, switching to flash mode. Stock kernel reinstalled! Thanks for your help!!
idbx said:
Thanks for your help!!
Click to expand...
Click to collapse
YaW