Sorry, but my english is bad
I full wiped my x10 mini pro to install a new ROM, I was with a 2.1 ROM
I've gone to Advanced option in xrecovery and I would like to format the Cache, but I formated the System and I rebooted the phone
Now my x10 does not pass of Sony Ericsson Logo, and I don't have Xrecovery.
The phone don't loop, just stay there on Sony Ericsson logo.
I've put the cable on PC and used the SEUS, but said that my phone has the lastest software.
I can turn on phone on flash mode, just this.
Can anyone HELP ME, PLEASEE???????????????????????
SEUS is saying you have the latest software because you do..it's just not working properly anymore.
The program says something similar to "You have the latest software and don't need to update. Are you sure you want to anyway?". Just click on "Yes" and it'll load the latest official firmware back onto your phone.
Simple.
No it didn't appear, sony won't let upgrade
After 4 hours I got,
I connected the phone on Flash Mode, I flashed and I put the 2.1 firmware, avaliable for you (XDA)
Little hard, but I got.
Now I installed CWM Recovery, and everything works fine.
Thanks for the help and thanks for you, XDA developers for doing a good joob.
Odd. Oh well, at least you got your phone back in the end.
Related
I installation xRecovery, but it does not work, boot while holding back would have been stopped at the Sony Ericsson screen, I think my installation steps are not wrong, because I have two Xperia X10, an old date is 10W28 can enter xrecovery, the new date is 10W48, can not enter xrecovery has been stopped at the Sony Ericsson screen. What is the problem? The new machine not support recovery？who can help me? Looking forward to your reply! Thank you.
PS: I am Chinese, and this post is translated by Google, I hope you can understand
Hi men! I am with same problem! I can not install xrecovery
Why is it? Nobody could understand it!
Thanks for Attention !
Try installing it using the manual method.
You are not suppose to hold back key. Just press it some times until xrecovery screen appears when you see SE logo on screen.
Ive got the same problem, Ive tried everything! To push the back button once, two times, three times, held it forever, waited more than 5 minutes, maybe 10? Still being stuck at Sony Ericsson screen.
I read somewhere, that a person erased all his files in the SD memory card, and put the files in the root of SD card.
And it worked for him. I will give that a shot when I get home, but I dont think it will solve it actually.
Ive rooted my phone, completely, installed busybox (it also confirmed that my phone was rooted), afterwards I installed xRecovery without problems.
Just the last part, being, crazy.. !!! HELP
Got the same frezze se
Igot the SAME problem over here rooted x10 xrecovery installed (bouth methods manual and auto) and when i try to restart in r-mode i only get frezze SonyEricsson screen i have to pull out the battery
Any explanation ??
Help!
just got a replacement x10 through and puting on xrecovery to et my rom back and its doing this, same xrecovery ive had on my sd card for ages that worked before. phones on orange uk fw again nowgoing to flash generic 2.1 then go back and try xrecovery, but worked fine before
Found a solution!!! I used root explorer to delete /data/local/temp/recovery folder then use the method script to load recovery and re install x recovery 2 scripts ran it in that order an got xrecovery fully functional hope can help
Sent from my X10a using XDA App
So i have tried Jit enabler v2 and bricked my SE
it freezes at Sony Ericsson logo,
what i can do is boot via xrecovery and since there i dont know how to remove Jit enabler,
Any advice?
Depending on what version of firmware you have, you need to download : http://forum.xda-developers.com/showthread.php?t=902974
and install as update.zip "*10* 2.0.A.0.*** Disable JIT.zip". That should help. If not, clear dalvik cache and reboot.
thanks, but how to put it to SD card because since its bircked i cant properly connect the phone so PC would read its SD card?
newestuser said:
thanks, but how to put it to SD card because since its bircked i cant properly connect the phone so PC would read its SD card?
Click to expand...
Click to collapse
I suppose that You don't have any card reader :/
I don't really remember if ADB works in xRecovery mode, but You can try, to unpack the "disable jit" package, and push manually files to "/system/bin", and "system/lib". The build.prop should not be a problem tho. You can do that with http://forum.xda-developers.com/showthread.php?t=868423 but, as I said, I'm not sure about working ADB in xRecovery. I figure You don't have enough time to push files on "Sony Ericsson" logo, cuz it reboots ;/
Just try.
thanks for helping out!
unfortunetly i have a reader, and only remembered after i did via xrecovery full reset (wipe data). BUT it still didnt booted, froze uppon sony ericsson logo, so im now moving files you gave a link and praying xrecovery still works
You moved to fast with wipe
I don't really know what to say to You right now.
but seems there is xrecovery backup, so in case...i think maybe i can reinstall via update service, than restore backup i made before wiping data out and installing jit disabler. Well thats by my logic should work. But im not really expierienced with phones and dont have x10 for a long time...
Unfortunately that I think is the last thing it's left to do. Just repair the phone via SEUS. I don't want to be a ****, but it's a bitter lesson for You, that if You have xRecovery, and ADB enabled theres always a way to get passed "Sony Ericsson logo reboot". Wipe was just to fast thinking. Hope You don't get in a trouble like that ever.
Yea, i tried too long time ago JiT v2 and i also bricked my phone, i also installed by accident wrong firmware ver JiT v1 and ended up, again, with a brick.
I that case, only solution to it is to Reflash whole firmware again. Trust me, i tried all possible solutions and it didnt worked. Luckily i had my contacts backed up on my g account.
I also learned my lesion hard way, and, this is 100% true.. "If you have xRec be sure to always have a backup."
P.S. Dont worry, mini/pro dont die that easily.. Its just get hardly wounded, it will always recover, but sometimes with memory loss (since u didnt had a backup)
When i first time bricked my phone it was a day old, i freaked out, but manage to get a grip and searched forum a bit. Since i like experimenting with my software i manager to brick my phone 10+ times per day..
And.. guess what phone im using now? x10 mini
Well, yea often flashes are not a big problem, but i don't wish that to anybody, cuz as you said, and all know it's a pain in the ass to get back settings, and all the data.
"Bricking" is defiantly to strong word. Boot loops, or hanging on SE logo is far from bricking, we always have a chance to "repair" our devices by ourself, so no problem here. The real problem can be in the future, when boot loader get fully cracked, and for example we interrupt his flashing process - situation well known for other android phones users. Phone gets bricked, and theres **** we can do about it, cuz recovery is obviously not working.
I did learned something else back then (5 years ago) when flashing my phone with with a desktop PC and suddenly power failure.. bricked my phone which not even got any bootloader to start with. Since that moment I always use my laptop to flash my phone as it has battery to continue the flashing process in case power failure happen again.
farsight73 said:
Since that moment I always use my laptop to flash my phone as it has battery to continue the flashing process in case power failure happen again.
Click to expand...
Click to collapse
Amen to that.
Today I finally got around to try and flash my X10 phone that AT&T refuses to update. I really went into this not really knowing what i was doing, so basically I was throwing this at wall here not knowing what'll happen. So I got a firmware .ftf file and a baseband file put it into my firmware folder and the flashtool said everything was alright. So now my X10 just goes through an endless loops of the boot logo for Sony Ericsson and then goes black screen and a blue LED (supposedly this is the Push-to-Talk LED) shows up. So now I'm wondering.. how exactly do I restore factory default on it without being able to go into the phone itself?
Just want to put this out there, I did use the search function but got no results, probably my internet giving me trouble
Thanks in advance for any help!
Use SEUS to restore to AT&T 1.6 first,
then go to the flashtool post to find a 2.1 global generic firmware to flash into your phone.
I think there are youtube tutorial vids showing you how to do so.
Hi guys, I've had a look around for this, but I can only find the solution for bootloaders that are unlocked. I suspect my Ray WASN'T unlocked. I accepted the OTA 2.3.4 update, thinking it would be fine. But the phone now shows the exclamation mark. I can get into both the recovery and fastboot modes (green/blue LED).
None of the recovery solutions are working for me. Is there a way for me to fix this, or will the phone have to go to a Sony Ericsson shop.
The official PC software from SE won't restore it either.
it is wise to go to sony shop , they will fix it
Not sure if this will solve your problem, but it solved mine:
The problem was with the bootloader. So I tried FlashTool_0.2.9.1_FOTAUnbrick which brings a small firmware information to reset the bootloader.
The problem I was having was to be able to correctly connect the phone to the flash tool. My phone's USB connection was constantly going up and down. So I decided to uninstall all the tools and drivers and install them from scratch.
In short, here's what I did.
Installed Update_Service_Setup-2.11.10.7.exe from sony ericcsson in order to get the USB drivers to work.
Followed the instructions of the Update_Service and flashed the latest update available for my phone (2.3.4). This didn't solve the startup problem, just installed the latest update.
I ran the Update_Service again and restarted the process has if I was going to flash again, but after the Update_Service detected the phone I canceled the installation. (I did this just to make sure the phone was connected in FlashBoot)
Then I installed FlashTool_0.2.9.1_FOTAUnbrick.exe, opened the folder of the application and ran X10FlashTool.exe
Hit Flash button and the program opens a Firmware Selection window with a preloaded firmware with two reseting contents (loader.sin, preset.ta). Hit OK button and waited until the program indicated the flash process was finished. The process of flashing takes a few minutes and we need to be patient. It might even seem like it's doing nothing but we just have to wait.
After finishing the flash process the program invited me to disconnect the phone and turn it on. I did so and the phone took probably a minute or so to startup. At first I thought it didn't solve the problem, because it was taking so long to start, but it did solve! So I waited patiently and the Sony Ericsson logo showed up giving me a new hope. After that I had to wait another 4 or 5 minutes for the phone to finish applying the new firmware mentioned in point 2. (There's no visual information of the conclusion process so you might wonder the phone might have hung.) Just waited and everything got back to normal with the benefits of the new firmware 2.3.4 (instead of the previous 2.3.3).
I hope it helps someone having the same issue.
xperia ray said:
it is wise to go to sony shop , they will fix it
Click to expand...
Click to collapse
Might not fall under warranty.
http://forum.xda-developers.com/showthread.php?t=1568792, check my tutorial, there is a guide to unbricking.
Yes, I'm an X10 mini n00b.
I'm sorry to post this, but I've been mucking around the net for over two days trying to find a solution, this is my last hope.
To the point:
I've an X10 min - e10i.
I had firmware 2.1.1.a.0.6 on it, and did all the steps towards installing a custom firmware.
I installed recovery, and it worked, so I created a NANDROID backup, then I rooted it, I hacked the bootloader. Everything was fine.
Then I came to put the minicm7.2, and everything stopped working.
The phone would not boot anymore past the Sony Ericsson logo wouldn't even go into recovery.
I mucked around a bit with flashtool, s1tool and others and got to the final position I'm in right now -
Phone boots, but the model now is e15i (no idea how that got there), and the buttons won't work, the sim and sdcard are unrecognized.
How do I fix this? I can't find the generic firmware for the A.0.6 anywhere, and non of the ftf's I downloaded were any help.
Tried to flash the E10i_2.1.1.A.0.6_Sony Ericsson.ftf one (220mb) and it shows me the unplug/plug your phone dialog.
Neither Pc Companion nor SEUS were any help.
Plz help...