Can I configure the XDA to connect to my office LAN using the USB connection !?!!?!??!
or is the device only capable of connecting over a wireless connection
which adapter is appropriate???
once connected, can the LAN internet connection be used by the XDA?
cheers
Jon
Absolutely. You set up 'desktop passthrough' in activesync (on the desktop). This will give you access to the LAN and internet.
ok- I have done that - and selected the "work" settings (on the desktop) do I need to configure anything on the device... if so - what?!?!
cheers
appreciate your help
No, as soo as the device connects to active sync, all the configuration is done. You should then be able to use pocket IE etc.
I can't remember exactly, but you may need to configure it as 'Internet' if you want to browse with Pocket IE etc.
Regards
Martin
cool - seems to working a treat!!!!!
cheers
disks to exlpore
can you use the screen of the xda to explore the network drives?
I may be doing something wrong. So a quick 1,2,3 would be helpful..
MmF
Unfortunately not. You need to know the path of the share you want to connect to. (ie \\Servername\sharename). You can then connect to this from file explorer
Good article on the subject
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnppc2k2/html/ppc_through.asp
I have figured out how to use Internet Sharing over WiFi, which essentially makes my Hermes an Access Point.
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (for the Hermes). It should currently be "BTPAN1".
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc")
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
And it works!
Interestingly, while IS was enabled, wifi stayed on and connected when the phone went to standby mode. Normally wifi turns off to save battery during standby. I imagine this will drain your battery in a hot minute, so bring your charger.
UPDATE (28-Oct-2007): Attached are some more beta releases of patched intshare.dll. I've created versions for most of the adapter names people have requested. By renaming this dll to intshare.dll and copying it to \Windows, Internet Sharing will use TIACXWLN1 (or whichever dll you use) when Bluetooth PAN is selected. I.e., if you use this, you will not need to make the registry changes above.
This will handle the registry part, but of course you'll still need to set up the ad-hoc network on your own.
UPDATE (03-Nov-2007): I've attached a beta version of the patched Internet Sharing app. It's in its own cab so it won't overwrite your existing IS. This app replaces Bluetooth PAN with 802.11b/g Wireless Ethernet. No registry hacking required. This app is well suited to replace the MS version on cooked ROMs.
If you use an adapter other than TIACXWLN1 then replace intshare.dll just as before.
UPDATE (08-Nov-2007): Attached is v 0.9.1 of the Internet Sharing Mod. This update addresses the 10 minute disconnect bug most people have experienced.
best,
fluxist
This is the first thing I'll try when i'm at home again!
I can't believe this! Waiting for this since i got my Hermes. Thx for this development. This is the greatest effort since Hard-SPL and WM6 upgrade.
Now I can connect my XBOX360 to the Internet without starting my PC and sharing it over PC-LAN. USB-Charger is at the Front of the XBOX360.
I hope it will work.
You said the Max-Connections can be reworked. Does this mean it will support Ad-Hoc AND WLAN-Routing to many recepients too?
This worked for me too on a Kaiser/TYTN II
I'm doing some additional experimentation to see what exactly this can do - for instance to replace a bluetooth connection to a laptop with a wifi one?
odessaranger said:
I'm doing some additional experimentation to see what exactly this can do - for instance to replace a bluetooth connection to a laptop with a wifi one?
Click to expand...
Click to collapse
not sure what you mean by replacing the connection. With ICS, obviously you cant share your connection over BT while sharing it over WIFI. and you can normally use wifi to connect to another computer by using an ad-hoc connection and manually entering a private ip on the same subnet for each computer.
this is awesome. worked perfectly for me.
After trying to stuff around with a proxy server for days and then you come along with something as simple as this....
boniestlawyer said:
this is awesome. worked perfectly for me.
After trying to stuff around with a proxy server for days and then you come along with something as simple as this....
Click to expand...
Click to collapse
Were you able to use more than one client connected?
I'll admit..when I saw this my first thought was that this was another "How can I do internet sharing via wifi" and the title was just misleading..instead I find myself very impressed with your accomplishment. Very well done! As a "hack" untill you figure out how to mod the dll which I'm sure is only a matter of time now that you have pointed everyone in the right direction, you can export the registry key for both the Bluetooth adapter and the Wifi one and "import" whichever one you want to use at a given time...it's not pretty but it should work.
Some issues of concern would be that the AP is wide open and can be connected to by anyone with no password etc...the bluetooth pairing allowed some security but using the wifi doesn't have the same shared key protection...or am I missing something obvious?
fluxist said:
I have figured out how to use Internet Sharing over WiFi, which essentially makes my Hermes an Access Point.
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
And it works!
When I used it I was only able to get one client to connect, however there is a reg value, HKLM\Comm\BTPAN1\Parms\MaxConnections that may help if it is changed from 1 to 2 (or whatever). But I haven't tried.
Interestingly, while IS was enabled, wifi stayed on and connected when the phone went to standby mode. Normally wifi turns off to save battery during standby. So that's a good thing, although I imagine this will drain your battery in a hot minute, so bring your charger.
I was going to release a patched intshare.dll so that the normal Internet Sharing utility can do this, but I'm having trouble changing the section addresses in the dll to the right values after I add data. If anyone knows how to do this PM me and I'll give you the details.
best,
fluxist
Click to expand...
Click to collapse
thank you.
this work actually stemmed from my trying to share my phone's tethered connection with another client. by which i mean, my laptop is in a cafe online through my 8525 using Internet Sharing(IS) over usb. and i want to provide a connection, through wifi or ethernet, to my gfriends laptop. this actually isnt normally possible b/c WM IS and XP Internet Connection Sharing (ICS) both have 192.168.0.1 hard-coded as the gateway IP. so the phone uses that IP to give my laptop a connection, and my laptop tries to use the same IP with ICS. anyway, it fails because of this. i was able to get past that problem by going into Settings -> Wi-Fi -> Network Adapters -> Remote-NDIS and manually setting 192.168.1.1. This lead to the breakthrough with regards to wifi. prior to that id been trying all different ways to have the wifi adapter spoof the bt pan, however i could never get dhcp to assign an IP to the client. this is what it took.
and it's great that DHCP does in fact work here. it makes it dead easy for any arbitrary client to get online. just join the adhoc network as if it were an AP.
anyway, security-wise the ad-hoc network can use WEP or WPA, so security doesn't have to be a problem. the procedures for doing this are the same as normal.
and i haven't tried that reg key to enable multiple clients. but it looked like an obvious choice. i'll leave that as an exercise for the reader
fluxist
I ran into same issue with XP internet sharing. Another workaround is to have a linux machine do NAT( since you can specify the IP used there) to whatever other clients you want and have it connected via bluetooth dun or bluetooth PAND (which is the solution I use to give internet to my replaytv and a couple of laptops in the house)...my edge connection is my main internet feed..a cacheing proxy such as wwoffle, squid of my personal preference "polipo" helps alot to when using gprs/edge etc since it helps with the latency.
fluxist said:
thank you.
this work actually stemmed from my trying to share my phone's tethered connection with another client. by which i mean, my laptop is in a cafe online through my 8525 using Internet Sharing(IS) over usb. and i want to provide a connection, through wifi or ethernet, to my gfriends laptop. this actually isnt normally possible b/c WM IS and XP Internet Connection Sharing (ICS) both have 192.168.0.1 hard-coded as the gateway IP. so the phone uses that IP to give my laptop a connection, and my laptop tries to use the same IP with ICS. anyway, it fails because of this. i was able to get past that problem by going into Settings -> Wi-Fi -> Network Adapters -> Remote-NDIS and manually setting 192.168.1.1. This lead to the breakthrough with regards to wifi. prior to that id been trying all different ways to have the wifi adapter spoof the bt pan, however i could never get dhcp to assign an IP to the client. this is what it took.
and it's great that DHCP does in fact work here. it makes it dead easy for any arbitrary client to get online. just join the adhoc network as if it were an AP.
anyway, security-wise the ad-hoc network can use WEP or WPA, so security doesn't have to be a problem. the procedures for doing this are the same as normal.
and i haven't tried that reg key to enable multiple clients. but it looked like an obvious choice. i'll leave that as an exercise for the reader
fluxist
Click to expand...
Click to collapse
Impact on BT?
What a brill find. Well done.
Does it break anything with bluetooth?
Tx
can someone elaborate what this is for, maybe give a sample scenario on using this?
Is this basically allowing a computer to use the internet connection of the pda phone (ie EVDO, 1RxTT, etc.) through wifi, instead of bluetooth or USB cable? (ie tethering?)
if someone manages to get this working with xbox 360 make a tutorial plx ;D
superflysocal said:
can someone elaborate what this is for, maybe give a sample scenario on using this?
Is this basically allowing a computer to use the internet connection of the pda phone (ie EVDO, 1RxTT, etc.) through wifi, instead of bluetooth or USB cable? (ie tethering?)
Click to expand...
Click to collapse
thats what i wanna know , could i use my hsdpa connection via wifi to my psp?
I'll do a tutorial when i'm at home again. Maybe somebody with know-how can make a cab-file v1.0 for this "WLAN-Modem hack".
This surely will be a great app.
yes, your xbox and your psp should be able to connect just fine, as long as they support ad-hoc wireless (which i imagine they must). this hack will allow the phone to act like any normal wifi access point. the only difference is the client has to be seraching for ad-hoc networks in addition to normal APs.
the difficulty with creating a cab file at this point is that the registry setting is not persistent. that is, it must be set each time you enable IS. the setting is lost every time IS starts. this is why i am trying to patch the dll - so wifi will work as a normal, additional option in Internet Sharing (and hopefully this should be ready soon).
fluxist
when you say click "IEEE 802.11b/g Compatible Wi-Fi" do you mean the wifi network adapters in my case would be "tiacxwln compatible wireless ethernet"? im trying it on a 6700 WM5
I would LOVE to get this working on my TMO WM6 Wing, but I'm having issues:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
Got it - except on my device it's Programs -> accessories -> IS
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
Check - but is the T1ACXWLN1 device specific? If so, how can I find the interface ID on my device?
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
For me it's settings -> connections -> network cards, but I don't have an IEEE 802.11 listed. I connected to an existing AP, and found that my 'SDIO WLAN Wireless Adapter' does receive a DHCP address, so I tried changing it to 192.168.1.1...
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
Found this and set up my WING-FI network.
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
The client PC connects to WING-FI, but never receives an IP address...
What could I be doing wrong? Is it the hardware ID in the registry? I've created the network with WPA, then after the connection problems, with no security - but still no change.
Thanks!!
Ryan
neonstorm said:
I would LOVE to get this working on my TMO WM6 Wing, but I'm having issues...
Click to expand...
Click to collapse
Very likely the string TIACXWLN1 needs to be something different. Check HKLM\Software\WZCSV\Parameters\Interfaces\
There should be a key there with the name of your wireless adapter. It should end in "1".
And if not there, it should also be visible under HKLM\Comm\
Let us know how it works out.
EDIT: I just noticed you typed T1ACXWLN1. The string must be TIACXWLN1. That's "i" not one.
fluxist
I own a PPC6700 as well and I was able to get it working no problem other than the fact that our wireless adapter is not the same as the one mentioned. The reg edit is the same it's just the first network adapter in the list when you create the network settings.
fluxist said:
yes, your xbox and your psp should be able to connect just fine, as long as they support ad-hoc wireless (which i imagine they must). this hack will allow the phone to act like any normal wifi access point. the only difference is the client has to be seraching for ad-hoc networks in addition to normal APs.
the difficulty with creating a cab file at this point is that the registry setting is not persistent. that is, it must be set each time you enable IS. the setting is lost every time IS starts. this is why i am trying to patch the dll - so wifi will work as a normal, additional option in Internet Sharing (and hopefully this should be ready soon).
fluxist
Click to expand...
Click to collapse
If you send me the dll I could look into it.
i have some experience with editing dlls.
good work man
as it shows on the title,is it possible to connect my android based device to my PC via wifi hotspot and control it from my phone,its like teamviewer but without having to connect to the internet ,i.e the connection would be between the pc and cellphone directly.
i hope my point is clear.
Sometime like RDP will work over a LAN, but having never used a wifi hotspot I'm not exactly sure if the connection would be correct. Connected to the same router a phone would be able to use RDP to connect to the local IP (usually 192.168.x.x) without ever going through the internet.
If I tether my Droid 3 and the Windows 7 laptop with bluetooth this method works with any app that supports Microsoft RDP. You would also need to be using a Windows version with RDP host support to get this to work.
thanks for your reply
I'm looking for a remote desktop app for the Android that uses (or is able to use) a bluetooth connection to connect. Or if that's not possible, a local wifi connection, ie: direct from my droid to my computer's wireless card, using only my local area connection.
Does anyone know an app that will do this?
It needs to give me the full screen of my computer, so nothing like Gmote or any remotes used for media centers will work for this project. I'd also like it to keep my screen on the computer while I use it, instead of locking it up.
Basically PhonemyPC but without having to use the internet to do so.
My reasons? I'm trying to connect to and control my Carputer running Centrafuse in my Eclipse. So that I can leave the car running, go outside of it, and pull up the full screen to push buttons and control the car's media center (and more) or even from the back seat. You know.. for the ladies Without having to send every command over 3g to verizon's servers, back out to a tower, and back into my carputer, slowing things waaay down. Thanks!
Well you could use Microsoft RDP (Remote Desktop Protocol) if your carputer is running Windows XP Pro or 7 Pro/Ultimate. Bluetooth support is better on Windows 7 as it has a newer stack. RDP host functionality is not included in home edition versions of Windows. The biggest advantage of Microsoft RDP is it doesn't require any extra software on the Windows host and is relatively easy to connect to. For the Android device, just search the market for your any remote desktop program that supports RDP. A disadvantage to RDP is that it sends the host system back to the Windows login screen when a remote session starts. This is a security feature so others can't see what you are doing and I don't think it can be disabled.
You could also try VNC, its similar to RDP and will work on other OSes, home versions of Windows, Linux, etc.
Either bluetooth or wifi tether (which is basically ad-hoc) should work. If the computer can surf the internet from the phone then it must be getting a local IP assigned.
Thanks for your suggestion.
However, this doesn't seem to apply yo what I need as A. It's for a mac (I have a PC) B. it doesn't seem to be an actual live streaming remote PC type of program, more like a monitoring program that sends you screenshots and data every few minutes, and finally.. from what I can tell their app is for ipod only, no android.
Maybe I'm mistaken, but thanks anyways
have you tried 2x client rdp/remote desktop?
EDIT:
after reading more of what you are trying to do...if you just want a media center remote, use myremote donate. it gives you keyboard and mouse control, as well as a full media center remote. works off wifi. you would need to download the server app for your puter off their website, and their client app connects to the server app to allow control of the computer. I use it all the time as a media center remote control. works awesome!
Try gPad, it's awesome. I hope that's what you're looking for. =)
Team,
I would have thought that this was easy but the more I look into it, the more complicated it seems. Simply, I want to be able to stream from my Android device to a TV. Specifically, I wan't to be able to access my SkyGo account and stream it to a hotel TV. I bought the EZcast dongle and this seems to work it should but once you select it as the AP, of course, the main WiFi connection is lost and so is the stream. Is there another way of looking at this to achieve my goals or is it a lost cause?
Thanks
pdes said:
Team,
I would have thought that this was easy but the more I look into it, the more complicated it seems. Simply, I want to be able to stream from my Android device to a TV. Specifically, I wan't to be able to access my SkyGo account and stream it to a hotel TV. I bought the EZcast dongle and this seems to work it should but once you select it as the AP, of course, the main WiFi connection is lost and so is the stream. Is there another way of looking at this to achieve my goals or is it a lost cause?
Thanks
Click to expand...
Click to collapse
Once you are connected to the EZCast AP, in theory you should then via the device's settings menu be able to tell it to connect to the hotel wifi to restore your internet connectivity (and so be able to stream from the net again). From a quick look on the net you should be able to select the "wifi network" option in the EZCast app and then use that to make the connection onward (to bridge the EZCast wifi to the hotel one).
Alternatively you may be able to set things up by doing a direct browser connection to the EZCast via your web-browser of choice and the IP address of the device as displayed on the TV once you are connected to it (if it has a web interface - I don't have one here at hand to confirm).
DarrenHill said:
Once you are connected to the EZCast AP, in theory you should then via the device's settings menu be able to tell it to connect to the hotel wifi to restore your internet connectivity (and so be able to stream from the net again). From a quick look on the net you should be able to select the "wifi network" option in the EZCast app and then use that to make the connection onward (to bridge the EZCast wifi to the hotel one).
Alternatively you may be able to set things up by doing a direct browser connection to the EZCast via your web-browser of choice and the IP address of the device as displayed on the TV once you are connected to it (if it has a web interface - I don't have one here at hand to confirm).
Click to expand...
Click to collapse
Thanks for this. It's a few weeks since I gave up on the "dream" but your note has given me a shove to have another look.
I'll report back.
Cheers
Did you check Google Chromecast key?
I don't know if it's compatible with the app you use but this could do the trick
www.google.com/chromecast
Sideness said:
Did you check Google Chromecast key?
I don't know if it's compatible with the app you use but this could do the trick
www.google.com/chromecast
Click to expand...
Click to collapse
Not yet but will be back soon.
Cheers
Hi,
I found some tutorials on how to mount external hard disk (connected to my Asus router USB) as local storage/folder on my android box (t95z) but I have troubles figuring out what is the correct share path. I also tried with googles Android samba client (and cifsmanager from the tutorial) but I can't get the right path to work. I can access the HD from Solid Explorer or kodi and all I have to do is write the local ip 192.168.1.1 but for above mentioned apps it doesnt work. nor does smb://192.168.1.1/ or smb://192.168.1.1/Transcend or just /192.168.1.1/
I need this primarily so that some apps that don't have network access can access my hard disk
It is a common problem with routers and shared storage
I had to go trough all sorts of hurdles every time I got a new router.
Best option would be to check Google for your router model and to look for things like acces problem for media drive, hard drive access, authorisation.
In many cases the router will provide the connected storage only if you log on to the IP of the router.
This is not only confusing but also a problem as not in all cases the client requesting can provide the required details to make this drive accessible.
Quite often the real path the has to follow after the IP or an inter webaddress for it is required for "general access" - this can often be found through a detailed Google search if you use the right terms and have some time.