Related
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
successfully send this cab to update 7720 to 7740. if see error message on PC don't worry, pls try many times.
warning: TouchXperience 1.6 beta won't work for 7740
EDIT: it just can be used for [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08]. Other rom can't use this method to update.
thanks for sharing
Its not good cab... After installing my phone reboots and it said SD card not working - changed or damaged :-(
Petulinek said:
Its not good cab... After installing my phone reboots and it said SD card not working - changed or damaged :-(
Click to expand...
Click to collapse
i think you didn't use [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08] this rom
joyqing said:
i think you didn't use [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08] this rom
Click to expand...
Click to collapse
Yes, this appendix wasnt in your post when i dowloaded cab :-(
What does 7740 bring you? First time I've heard of this version.
Internet Sharing
Is "internet sharing" working with this update?
Just updated, Great, not sure what any difference is but my phone is 7740 now
It fixes some of the Exchange Server issues that Build 7720 has and it also adds some improvements to the voicemail notification.
+ I guess: Internet sharing
=)
Helllo
Yhe senior member PETBEDE says that's
"Hi ALL.
HTC and SAMSUNG are PUSHING OUT UPDATE through ZUNE.
DO NOT UPDATE to that if by chance u have it cause it will CHANGE your BOOTLOADER(SPL) to 5.XX and making you not to be able to FLASH ROM.
I am using HTC HD7 the SPL is 5.10. Don't know what SAMSUNG will be but I do know u won't be ABLE to FLASH ANY ROM."
Any of you can confirm if in HD2 change number of bootloader
Thanks
Just applied this cab, no internet sharing whatsoever.
Rebooted phone and held down volume:
Code:
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
So I guess my bootloader is still intact.
updated my hd2 sucessful,
i'm on 7.10.7740.16 now. firmware revision 72250.21.40600.444, bootloader 0.96.2250.0.
internetsharing (settings-page activated with cab around here) doesn't work like before because of "wrong settings" my apn is set to web.vodafone.de
any idea what i can do to make it work??
malsehn said:
updated my hd2 sucessful,
i'm on 7.10.7740.16 now. firmware revision 72250.21.40600.444, bootloader 0.96.2250.0.
internetsharing (settings-page activated with cab around here) doesn't work like before because of "wrong settings" my apn is set to web.vodafone.de
any idea what i can do to make it work??
Click to expand...
Click to collapse
few weeks ago i have this problem with bootloader 0.96....
solution: simple turn off device. pull out battery and leave few minutes without battery. putt battery back and boot to bootloader... HSPL 2.08 must be back.... if not try without battery longer....
oh, not to get me wrong, my phone boots and runs correctly, just the internet sharing doesn't work... the bootloader info i wrote is just displayed in the phone's info page ...
[edit] ... oh, ok, you're right, it's displayed in bootloader-mode (tricolor-screen), too... will try your method now any further help with ics still appreciated..
Recently I have not been getting sms notification of voicemails.
This update seems to have fixed this issue.
Thanks
im successfully update to 7740. but there's no internet sharing setting.. any ideas? thanks
Beterry Life Anyone???
Does anybody know how well the battery performs under this new update?
tarmizizain said:
im successfully update to 7740. but there's no internet sharing setting.. any ideas? thanks
Click to expand...
Click to collapse
you can activate the ics toggle in the settings page with the xap on this thread (for instruction see the last sentence in first post)
but if switched to on, it will still pop up with a messsage
"Connecton not shared. There's a problem with the current settings" because of the lack of proper driver (firmware) updates
支持joy,感谢你的分享。。
malsehn said:
you can activate the ics toggle in the settings page with the xap on this thread (for instruction see the last sentence in first post)
but if switched to on, it will still pop up with a messsage
"Connecton not shared. There's a problem with the current settings" because of the lack of proper driver (firmware) updates
Click to expand...
Click to collapse
thanks. so, our poor HD2 will never be able to have internet sharing because of the driver.. is that it? that is sad.
Guys,
i have a Mozart branded with T-MO Germany and the latest Mango Update. All is stock, nothing tweaked.
Today I was announced that an HTC Update is due (firmware) supposedly bringing the Tethering to my device.
Unfortunately this updates does not succeed on my device... I tried every recommended thing, switched PCs, hard resetted the device, tried it over and over again.
After a little investigation I found out that my device seems to have pretty old Bootloader and Firmware versions compared to the device my colleague updates successfully this morning... I have the impression, that this might be the reason, why my device keeps failing.
Here the important information:
OS ver: 7.10.7740.16
FW ver: 2250.09.12505.111
Radio softw. ver: 5.50.09.18_22.24.50.09U
Radio hardw. ver: A.102.0.D4
Bootloader ver: 1.25.2250.5 (111337)
Any ideas what the problem could be and how I could fix it?
The error code Zune throws: 80180008 - Update unsuccessful
Thanx for your replies...
Same prob here - I am on b/l 1.32 though.
Hello,
I have the same issues. Did you guys get a result on this?
Hi All,
Just letting you know that I fixed my issue.
I ended up downloading and installing the Telstra branded ROM from this thread - http://forum.xda-developers.com/showthread.php?t=915827 then worked through all the updates and the latest HTC update worked, no error.
Not sure why but anyway I now have internet sharing on my Mozart - happy camper!
Thanks
Adam
cyber.bee said:
Unfortunately this updates does not succeed on my device
...
I found out that my device seems to have pretty old Bootloader and Firmware versions compared to the device my colleague updates successfully this morning... I have the impression, that this might be the reason, why my device keeps failing.
...
The error code Zune throws: 80180008 - Update unsuccessful
Click to expand...
Click to collapse
Unfortunatly zune does not really tell us whats the problem underneath and the error code does not get us anywhere. Even not the suggested use of WPRestoreToolv2 (4.8.2345) gets us out of the problem.
For what i have found out the reason for the latest HTC OEM Update to actually fail is that its signature can't be verified by the installer on the device and thus the update is not getting installed. The failing signature check itself is caused by the fact that at least one of the previous HTC OEM updates were not installed. This can be verified indirectly by looking for example at the bootloader version.
The solution is quite simple: use cab sender to install the 1st HTC OEM Update and then you can successfully install the second HTC OEM Update, either by using cab sender again or via zune.
Hello bleh815,
I am getting the same issue (error 80180008), and you are suggesting:
[The solution is quite simple: use cab sender to install the 1st HTC OEM Update and then you can successfully install the second HTC OEM Update, either by using cab sender again or via zune.]
Any idea, where I can obtain the 1st and 2nd HTC OEM updates?
ZUNE only finds the 7740.16, but fails to install. I can install the cabs, if I can get hold of the OEM cabs of HTC.
Thanks
mvita said:
Any idea, where I can obtain the 1st and 2nd HTC OEM updates?
Click to expand...
Click to collapse
Read here
10chars
I believe this is the Lumia 800 RM 801 Tango OEM update:
http://download.windowsupdate.com/m..._bd1d7e1563c72dea541aeabdefc5ca074fd907d1.cab
Found with Wireshark -> Updated to 8773 via cab sender then let Zune update this..
Sorry for bute what is the difference between this cab and the other from Navifirm?
Didn't work for me. Gave me an error after showing the "completing the update" message or something like this.
So tried using the cab sender method with this from 7.10.8107.79 and it failed. Don't suppose you snagged the link to the intermediate update as well?
Someone else already had ->
http://forum.xda-developers.com/showpost.php?p=27960331&postcount=929
Is for RM 801 - and must do the 2 cab updates in the thread above first!!!
Guys you scare me so much !! Why there are 2 links for every update in the thread you mentioned??? What should i do with those 2 files under the "OS:" line?? Should i install them one by one or what???
EDIT: Hey guys.. i tried sending the first .cab to my phone and it kept saying "Installing updates............" but nothing happened then i did the totally stupid thing of unpluging my phone. Now i don't know what to do. If i turn it on it keeps showing me the photo with the clear statement "do not unplung the device" sort of photo. Im so stupid what shall i do now??
EDIT 2: After staying like this ( with that picture telling me not to unplug the device ) and after many manual restarts it just booted up and said Update succesfull. Huh..
My unlocked Lumia received 3 updates... Just saying
chessdragon136 said:
Someone else already had ->
http://forum.xda-developers.com/showpost.php?p=27960331&postcount=929
Is for RM 801 - and must do the 2 cab updates in the thread above first!!!
Click to expand...
Click to collapse
No, you mustn't. You will mess up your phone if you deploy those two only. You should also deploy language packs for all languages currently supported by your phone, and in European Lumias it usually means all 22 of them.
So, once you installed all 24 "diff-7.10.8107.79-7.10.8112.7" cabs you can continue with all 24 "diff-7.10.8112.7-7.10.8773.98" cabs bringing your OS up to Tango version. Then you can safely deploy the OEM update cab containing the .122220 firmware, which requires OS version 7.10.8773.9 - it fails to install on phone running the 8107 OS.
ChrisKringel said:
My unlocked Lumia received 3 updates... Just saying
Click to expand...
Click to collapse
Everybody does
1. The OS 8112 build
2. The OS 8773 build
3. The OEM update
_Madmatt said:
Everybody does
1. The OS 8112 build
2. The OS 8773 build
3. The OEM update
Click to expand...
Click to collapse
Sorry but what are the difference between then?
xpc21 said:
Sorry but what are the difference between then?
Click to expand...
Click to collapse
Differences between what?
The OEM firmware .122220 in RM-801 gives you internet sharing and ringtone flip-to-silence. And it requires your OS to be 8773.9, otherwise the deployment fails.
OS 8773 gives you Tango - new MMS features, new wallpapers and some under-the-hood secret improvements.
OS 8112 gives you the ability to upgrade to Tango, because the 8873 update is not cummulative but a differential update requiring you to be on 8112.
And that's pretty much it. If that's what you asked.
I received an update from Windowsphone connector that seems the tango update for Lumia800. I attempted to update it but failed. No matter whether using windowsphone connector or Zune, it returns only one feedback that is the error 80180048.
Unbranded HK,Black,22 installed languages
Anyone who has the idea about that?
thanks
Click to expand...
Click to collapse
The missing language pack when you upgrade from 7740 to 8107 may lead to this problem.
The method is to flash all the missing language packs to your phone.
Steps:
1,drag all .cab files into your cab sender folder and press "s" to flash
2,process to your normal upgrade
Download link
http://sdrv.ms/N21MZi
eamars said:
I received an update from Windowsphone connector that seems the tango update for Lumia800. I attempted to update it but failed. No matter whether using windowsphone connector or Zune, it returns only one feedback that is the error 80180048.
Unbranded HK,Black,22 installed languages
Anyone who has the idea about that?
thanks
Click to expand...
Click to collapse
Anything useful here? http://support.microsoft.com/kb/2530409