Okay so I had CM7 on my Samsung Vibrant and I wasn't satisfied because it had trouble with the GPS so I decided to go back to stock rom so I could then use a different Rom.. I flashed back with Odin ..
I'm now trying to get into clockwork recovery but whenever I'm in Rom Manager it doesn't reboot to it, the screen just freezes for a second and then doesn't do anything, just stays on the same screen.
I can't get into the DOWNLOAD mode as I've tried all the different combinations of Volume Up, Volume Down and Power button..
I really don't want to be stuck on 2.1 and feel like such a noob haha
Oh and the first screen when booting up my phone says I-9000 which I know isn't stock...soo maybe I downloaded the wrong stock in the first place? :/
That means you are on GB bootlooders. To get in to recovery, it's volume down + power button; download mode is volume up + power button. That or vice-versa, I never remember. But there is no Clockwork for 2.1.
I highly recommend this, has everything you need in one place.
DrummerDan1 said:
I can't get into the DOWNLOAD mode as I've tried all the different combinations of Volume Up, Volume Down and Power button..
Click to expand...
Click to collapse
Volume up + Volume down then plug in the USB. That's how you go to download mode.
No I've tried that..
1: Take battery out of phone.
2: Put battery back in phone.
3: Press and hold VolumeUp+Power Button at the same time. (hold until it goes into DL mode)
4: Connect to computer and Odin to JFD Stock image.
Related
I installed this kernel from Chainfire's thread: CF-Root-SGS2_XW_XEU_KH4-v4.1-CWM4.tar
However, my phone says that I have the KH7 kernel, but I figured this one ( KH4 ) would be close enough. It flashed fine, and I have root access and all, but my back button no longer works at all (not even haptic), and my Home button is acting like a back button - meaning I essentially have lost my Home button...
But now that my device is rooted, when I boot into debug mode, I get the CWM menu, meaning I can no longer use Odin correct? But because my home button is gone, I cannot select "install zip from sd card"
My question is this: Without the use of the Home button on my device, is there anyway to flash a new kernel?
Thanks to anyone who can answer this.
You just flashed cf root for the INTERNATIONAL SGS2 and NOT FOR THE ATT SGS2. That is why you lost some buttons. Make sure to use ATT SGS2 ROMS/KERNELS. There is a post about how to fix your issue in the att section to get you back to the att version of the SGS2.
Brought to you by my KICKASS CM7 AT&T SGS2
I realize I flashed the wrong version, but my question is how do I flash a different version without the use of my Home key? That is the issue.
sicvita said:
I realize I flashed the wrong version, but my question is how do I flash a different version without the use of my Home key? That is the issue.
Click to expand...
Click to collapse
You boot into Download mode and flash the right one in Odin. How hard is that.
Sent from my SAMSUNG-SGH-I777
Can I still use Odin even if I have already rooted the device? Do I just hold up vol + down vol + power to boot into download mode? I thought that was called debug mode...
From the FAQ:
How do I put my phone into Download mode so I can flash w/ Odin?
Take out the battery from the back to ensure your phone is completely off, then put the battery back in. Now hold down on both the Up and Down Volume buttons and plug the USB coming from your PC into your SGS2. Once you see a warning screen let go of the volume buttons. Hit the Up Volume button to continue into download mode.
I found that you can just click the volume down + power button to get into download mode.
I think everyone is missing the point of my question. Can I flash my phone with Odin EVEN IF I ALREADY HAVE CWR INSTALLED? I cannot use CWR to flash as I lost the use of my Home button (cannot select from the menu)
I resolved my own issue. There is a difference between RECOVERY mode and DOWNLOAD mode. To boot into recovery you hold vol up + vol down + power, to boot into download mode you JUST hold vol up + vol down, then plug into USB. I did not realize there were two different modes, sorry for wasting time and causing confusion.
Yup, you can always boot into download mode as long as you didn't flash a bootloader.
Another way of saying it is:
If the screen turns on at all, you can recover by flashing something correct in download mode.
Okay, so I think I brainfarted and softbricked my Vibrant. I tried to get it into download mode, but pressing vol up+down only gets me a gray battery icon, not the usual download screen. When I power it up regularly, it goes into bootloop. It's never had a problem going into download mode before, so I don't know if there's a malfunction with the vol buttons or what. I'm otherwise following the instructions for getting into download mode to a T. What else can I do?
Did you pull the battery then hold both volume buttons pop the battery back in then plug the USB cable
Sent from my SGH-T959 using XDA App
Carpe Noctem said:
Okay, so I think I brainfarted and softbricked my Vibrant. I tried to get it into download mode, but pressing vol up+down only gets me a gray battery icon, not the usual download screen. When I power it up regularly, it goes into bootloop. It's never had a problem going into download mode before, so I don't know if there's a malfunction with the vol buttons or what. I'm otherwise following the instructions for getting into download mode to a T. What else can I do?
Click to expand...
Click to collapse
Do you have Froyo or Gingerbread bootloaders?
with GB bootloaders hold Volume up + Power for download mode(no need for battery pull or to be conected to usb), also Volume down+Power for recovery.
with Froyo bootloaders do what was listed in the post above.
bobshute said:
Do you have Froyo or Gingerbread bootloaders?
with GB bootloaders hold Volume up + Power for download mode(no need for battery pull or to be conected to usb), also Volume down+Power for recovery.
with Froyo bootloaders do what was listed in the post above.
Click to expand...
Click to collapse
The GB bootloaders combo worked great. This forum rocks. Thank you so much.
i have a vibrant that now shows vibrant screen then cyanogen screen then some files running and then agfain the same process.
i am afraid . it was a new phone how to recover i was flashing the ics passion.
and when i keep pressing thr volume less and power key it just flashes vibrant on screen.
Bootloop!!!!!
Directly from the NB's ICS OP
NOTE: If you get in boot loop during first install, DONT panic.
Remove battery. Hold Vol Down + Home + Power Key. You will enter new recovery mode. Flash the ROM again.
Some users (having Froyo Bootloader) need to press Vol Up Key instead of Home Key to get in Recovery.
Click to expand...
Click to collapse
should i press the keys after removing and putting the battery again?
Try a few combos. You ultimately want to get back into recovery mode to reflash.
what are the comboos please help me '
Combos to get into recovery:
1. Gingerbread Boot loader: Vol Down + Home + Power Key (That's what neo's OP says) or Volume Down + Power Button (Elsewhere I've heard that combo, so try both. Can't test myself because I have Froyo Boot loader and running MIUI)
2. Froyo Boot loader: Both Volume Keys + Power Button
Ultimately you can enter download mode and use Odin to flash to stock. You can enter download mode using Power+Vol.Up
CuraHack said:
Ultimately you can enter download mode and use Odin to flash to stock. You can enter download mode using Power+Vol.Up
Click to expand...
Click to collapse
or as soon as the loop shuts off screen and is about to start again ( black screen followed by vibrant) quickly press up and down volume and hook usb cable up...( you can be already pressing up and down) works like a charm for me....have fallen into that boot loop thing once to many times....but theres always time for once more lol...
Not sure if this is the proper section for this but thought I would post this here as I'm sure it would highly assist people in development and other tasks. This is the button combinations you need to enter each mode.
ODIN/Download Mode
Make sure your device is completely off
Key(s): Volume Down
While holding this key down simultaneously press the Power button until you see a disclaimer on the screen
Then let go of both buttons and press Volume Up to accept the disclaimer
Once the green robot is visible on the screen this indicates that handset is in now ODIN/Download mode
Recovery Mode
Make sure your device is completely off
Key(s): Volume Up
While holding this key down simultaneously press the Power button
As soon as the phone vibrates, let go of the Power button but keep holding Volume Up
When you see the "Samsung Galaxy S4" logo (not just the word "Samsung"), right after that, the next screen you should see is your recovery
Don't let go of Volume Up until you see your recovery
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
mikebuck69 said:
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
Click to expand...
Click to collapse
Sorry about that, small typo on copy/paste. Has been fixed.
Thanks!
No download mode
I've been trying to get into download mode for days and can't seem to figure it out. I have the Verizon g s4 sch-i545. I've done all of the key combos and even tried some combos + plugging in the USB cable. Nothing is working for me. Any help would be nice. Thanks
I have no problem getting into recovery mode....
mikebuck69 said:
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
Click to expand...
Click to collapse
Home isn't necessary for recovery either. I just hold power and volume up, when the phone vibrates I let go of power and continue to hold volume up until I see the booting recovery message in the upper left.
So nothing? Nobody can offer some advice?
Moto not working
So I'm having no success with this. I went through all the steps including flashing the pre-release tar ball (MD2). All this went without fail, however once I launched Motochop and pressed enter to root. I get line Daemon not on. run port 5873. Daemon connected or on and then thats it. I don't get a notification at any point prior to me pressing enter or afterwords that I need to accept. It just stops and I get "you should reboot" from the notification bar. Have I done something wrong? I went through all the prior steps several times and I keep getting this error message.
SonicJoe said:
Home isn't necessary for recovery either. I just hold power and volume up, when the phone vibrates I let go of power and continue to hold volume up until I see the booting recovery message in the upper left.
Click to expand...
Click to collapse
Agreed. Volume up and power for recovery. Volume down and power for odin.
Sent from my SCH-I545 using Tapatalk 4 Beta
Nice summary. Im getting my S4 any day now.
Sent from my Nexus 7 using Tapatalk 2
Well I have pushed volume down and power over and over and my phone will not enter odin.
thanks you !
Bdubois100 said:
Well I have pushed volume down and power over and over and my phone will not enter odin.
Click to expand...
Click to collapse
Don't just push them. You need to hold both until you feel the phone vibrate. Then you can let go of the power button, but keep holding volume down until download mode starts.
SonicJoe said:
Don't just push them. You need to hold both until you feel the phone vibrate. Then you can let go of the power button, but keep holding volume down until download mode starts.
Click to expand...
Click to collapse
When someone offers a debloat script that's in a Zip file and says "flash it to your device" do you think they mean flash it in Odin mode or flash using TWRP??
onearmsysiphus said:
When someone offers a debloat script that's in a Zip file and says "flash it to your device" do you think they mean flash it in Odin mode or flash using TWRP??
Click to expand...
Click to collapse
Flash it in recovery
Thanks SonicJoe. Starting to figure *some of this stuff out haha.
Issue
alrigth i got it to work. is there any way to move cwm backups to the sd card?
Odin Error
I am having one heck of a time flashing to the GS4 with Odin. I follow all of the steps to a "t" but cannot get the custom kernal onto the device. I'm having no problem getting to download mode and all the setting look to be correct, however when I start the Odin process I end up with a "fail" every time. I have been looking around the web for a few days for an answer, but so far this looks like the best thread to get help.
Make sure the kernel you are trying to flash is compatible with the Odin method. A lot of kernels can be flashed via custom recovery. The first thing I would do is uninstall and then reinstall the Samsung drivers. Make sure you have the latest and it is compatible with your computer OS. You would be surprised how often drivers can screw up Odin.
Sent from my SCH-I545 using xda app-developers app
my s4 is getting into download mode itself..
i got my s4 i9500 frm bangkok but now not accepting the network ...so tried to get in download mode n root it n then 2 chg the rom n try but its not getting into download mode itself wen i use (vol down+power+main btn) ... but its going in recovery mode alone wat can b done to dis??? can any one pls help it out>????
Recently did factory reset for my i9100, downloaded reboot manager and rebooted into recovery from that app.
Now I can't get out of recovery mode since power button doesnt work in there and my middle button is broken too.
VolUp and VolDwn work everywhere and I can turn phone on by power button.
Any help? I'm on 2.2.3
edit/ i also rooted the phone recently with kingroot via pc
Hi @noupls,
To get out of recovery mode, you need to take out your phone battery.
Once your phone is off, reinsert the battery. Then go into download mode (press and hold volume down + power button + home).
Once in download mode, flash stock ROM via ODIN (if you've already download the firmware files).
Saber.
With broken buttons, you're pretty much stuffed whatever you do with the device. You NEED to get them repaired/replaced ASAP.
In recovery, there should be an option
REBOOT SYSTEM (NOW)
With your broken buttons I'm pretty sure that'll be the only thing that works.