I installed this kernel from Chainfire's thread: CF-Root-SGS2_XW_XEU_KH4-v4.1-CWM4.tar
However, my phone says that I have the KH7 kernel, but I figured this one ( KH4 ) would be close enough. It flashed fine, and I have root access and all, but my back button no longer works at all (not even haptic), and my Home button is acting like a back button - meaning I essentially have lost my Home button...
But now that my device is rooted, when I boot into debug mode, I get the CWM menu, meaning I can no longer use Odin correct? But because my home button is gone, I cannot select "install zip from sd card"
My question is this: Without the use of the Home button on my device, is there anyway to flash a new kernel?
Thanks to anyone who can answer this.
You just flashed cf root for the INTERNATIONAL SGS2 and NOT FOR THE ATT SGS2. That is why you lost some buttons. Make sure to use ATT SGS2 ROMS/KERNELS. There is a post about how to fix your issue in the att section to get you back to the att version of the SGS2.
Brought to you by my KICKASS CM7 AT&T SGS2
I realize I flashed the wrong version, but my question is how do I flash a different version without the use of my Home key? That is the issue.
sicvita said:
I realize I flashed the wrong version, but my question is how do I flash a different version without the use of my Home key? That is the issue.
Click to expand...
Click to collapse
You boot into Download mode and flash the right one in Odin. How hard is that.
Sent from my SAMSUNG-SGH-I777
Can I still use Odin even if I have already rooted the device? Do I just hold up vol + down vol + power to boot into download mode? I thought that was called debug mode...
From the FAQ:
How do I put my phone into Download mode so I can flash w/ Odin?
Take out the battery from the back to ensure your phone is completely off, then put the battery back in. Now hold down on both the Up and Down Volume buttons and plug the USB coming from your PC into your SGS2. Once you see a warning screen let go of the volume buttons. Hit the Up Volume button to continue into download mode.
I found that you can just click the volume down + power button to get into download mode.
I think everyone is missing the point of my question. Can I flash my phone with Odin EVEN IF I ALREADY HAVE CWR INSTALLED? I cannot use CWR to flash as I lost the use of my Home button (cannot select from the menu)
I resolved my own issue. There is a difference between RECOVERY mode and DOWNLOAD mode. To boot into recovery you hold vol up + vol down + power, to boot into download mode you JUST hold vol up + vol down, then plug into USB. I did not realize there were two different modes, sorry for wasting time and causing confusion.
Yup, you can always boot into download mode as long as you didn't flash a bootloader.
Another way of saying it is:
If the screen turns on at all, you can recover by flashing something correct in download mode.
Related
Okay so I had CM7 on my Samsung Vibrant and I wasn't satisfied because it had trouble with the GPS so I decided to go back to stock rom so I could then use a different Rom.. I flashed back with Odin ..
I'm now trying to get into clockwork recovery but whenever I'm in Rom Manager it doesn't reboot to it, the screen just freezes for a second and then doesn't do anything, just stays on the same screen.
I can't get into the DOWNLOAD mode as I've tried all the different combinations of Volume Up, Volume Down and Power button..
I really don't want to be stuck on 2.1 and feel like such a noob haha
Oh and the first screen when booting up my phone says I-9000 which I know isn't stock...soo maybe I downloaded the wrong stock in the first place? :/
That means you are on GB bootlooders. To get in to recovery, it's volume down + power button; download mode is volume up + power button. That or vice-versa, I never remember. But there is no Clockwork for 2.1.
I highly recommend this, has everything you need in one place.
DrummerDan1 said:
I can't get into the DOWNLOAD mode as I've tried all the different combinations of Volume Up, Volume Down and Power button..
Click to expand...
Click to collapse
Volume up + Volume down then plug in the USB. That's how you go to download mode.
No I've tried that..
1: Take battery out of phone.
2: Put battery back in phone.
3: Press and hold VolumeUp+Power Button at the same time. (hold until it goes into DL mode)
4: Connect to computer and Odin to JFD Stock image.
I have a i9300 s3. I upgrade to 4.1.2 jb , my phone become safe mode. however i try to get out but i failed.
1. restart by press back button
2. restar by press volume up button and other also cant get out from safe mode.
downgrade to 4.0.4
I press volume down key+ home key + power to downloader mode, and downgrade to 4.0.4 by odin. after downgrade 4.0.4, i go to recovery mode, but my volume own button not working. i use odin running to cwm recovery mode, press up volume button until can wipe factory reset and reboot, it' out of safe mode. but the volume down button no working after boot. When I press volume down key+ home key + power it still can go into downloader mode.
After 1 week, my phone auto download software upgarde and install to 4.1.2, but it cant cause cwm recovery mode disturb it. after that my camera no function at all. now i wanna try to go downloader mode again, but my phone volume up button also become no working at all to go downloader mode, but it working when the phone is on.
Actually whats was going on?? how can i upgrade to 4.1.2 ?? or i just can stay at 4.0.4 but now my camera no working.
Anybody looking for this problem before?? :crying::crying::crying:
That's one hell of an unlucky upgrade. I don't know mine upgraded/rooted without problem. Can't you just return to stock once you're able to enter download mode?
Fail to understand the problem be specific with current problem .
jje
sglong_noob said:
I have a i9300 s3. I upgrade to 4.1.2 jb , my phone become safe mode. however i try to get out but i failed.
1. restart by press back button
2. restar by press volume up button and other also cant get out from safe mode.
downgrade to 4.0.4
I press volume down key+ home key + power to downloader mode, and downgrade to 4.0.4 by odin. after downgrade 4.0.4, i go to recovery mode, but my volume own button not working. i use odin running to cwm recovery mode, press up volume button until can wipe factory reset and reboot, it' out of safe mode. but the volume down button no working after boot. When I press volume down key+ home key + power it still can go into downloader mode.
After 1 week, my phone auto download software upgarde and install to 4.1.2, but it cant cause cwm recovery mode disturb it. after that my camera no function at all. now i wanna try to go downloader mode again, but my phone volume up button also become no working at all to go downloader mode, but it working when the phone is on.
Actually whats was going on?? how can i upgrade to 4.1.2 ?? or i just can stay at 4.0.4 but now my camera no working.
Anybody looking for this problem before?? :crying::crying::crying:
Click to expand...
Click to collapse
First thing, and i don't pretend to be rude, write your question in the right way.
There are Forum Rules for all of US.
The second one, the download mode, is by pressing volume DOWN(not up)+HOME+POWER. The one you are choosing as far as i comprehend by you спасибоwords, leads totCWM (either stock or 3d party one).
The third, if you somehow managed to downgrade to ICS(4.0.4), just press OTA update
Cheers!
worf_1977 said:
First thing, and i don't pretend to be rude, write your question in the right way.
There are Forum Rules for all of US.
The second one, the download mode, is by pressing volume DOWN(not up)+HOME+POWER. The one you are choosing as far as i comprehend by you спасибоwords, leads totCWM (either stock or 3d party one).
The third, if you somehow managed to downgrade to ICS(4.0.4), just press OTA update
Cheers!
Click to expand...
Click to collapse
Actually when the phone boot on ICS 4.0.4 the volume up button is working and the volume down button is not working.
Ya, i know that the download mode is by pressing volume DOWN + HOME＋POWER.
I can going to page WARNING!! a custom OS --------------- after need press Volume UP to continue and Volume DOWN to cancel, but the volume up and volume down button also not working.
Maybe is because my volume DOWN button problem, so make me headache.
I know that CWM (either stock or 3d party one). But i need it to wipe my factory reset after downgrade to 4.0.4 by Odin.
sglong_noob said:
Maybe is because my volume DOWN button problem, so make me headache.
When it was JB 4.1.2, It will boot on SAFE Mode, However how many times i reboot , reboot by press back key or up volume button too.
I cant get off from SAFE mode.
At the moment, I try to downgrade to ICS 4.0.4 by Odin. I can going to download mode. after Odin pass, It stuck at the samsung logo.
I try to go to recovery mode by press VOLUME UP + HOME + POWER. I can go to recovery mode but the Volume DOWN not working and i cant go to wipe reset.
I going to download mode again and running PDA with CWM tar. I use CWM recovery mode to going to wipe reset by press VOLUME UP button only. Pls try to understand this.
Once I wipe reset, I can boot my phone on ICS 4.0.4. The moment all function ok, camera too. Just the Volume DOWN button not working.
I use it for a week, Software upgrade automatic but it failed. It stuck on CWM recovery mode. I try reboot again, the Volume UP button is WORKING, the camera not working. The big problem is I cant go to download mode again, just stuck a WARNING page, and my volume UP and DOWN also not working when i stuck a warning page.
Click to expand...
Click to collapse
Whats I going to try is tomorrow I will buy the USB JIG and force my S3 to download mode and try upgrade to JB 4.1.1 or 4.1.2 the latest Version ( March ) by Odin again. Any suggestion too??
try installing phillz touch recovery in odin using the tar file you can use touch to go up and down also try installing stock 4.1.2
Or you can just issue an ADB reboot download
Sent from Quo'nos via subspace transmission
I'm on trying to 4.1.2 version now...
4.1.2 JB version, safe mode....
Volume down button not workin:crying:. camera workin right now.
I cant go to recovery mode by press UP + VOLUME + POWER:crying:
Now i down grade to 4.1.1
omg, it stuck on samsung logo..
maybe is because of I still didnt wipe factory reset but i cant go to recovery mode too. I press volume UP + HOME + POWER , it restart and restart, cant go to recovery mode too.
Whats can I do now??
I stuck over the samsung logo, cant going recovery mode by press volume UP + HOME + POWER
I try adb reboot recovery mode but
"error : device not found"
Have any idea to recovery mode??:crying::crying::crying:
Try in a terminal from thee phone itself.
Just type "su" and then "rebbot recovery"
Sent from Quo'nos via subspace transmission
worf_1977 said:
Try in a terminal from thee phone itself.
Just type "su" and then "rebbot recovery"
Sent from Quo'nos via subspace transmission
Click to expand...
Click to collapse
Now my phone cant boot, just stuck at samsung logo. i cant go to recovery mode....:crying::crying:
same issue here
sglong_noob said:
Now my phone cant boot, just stuck at samsung logo. i cant go to recovery mode....:crying::crying:
Click to expand...
Click to collapse
I also have a button stucked, which you can easily see in the bootloader, as it scrolls automatically all the options. It is hw issue, but wanted to know if there is a kernel or someway in which I can disable the volume rocker entirely.
Is there anyway to disable safe boot when booted up into safe boot. I can install apps but they will not open due to the fact that I am in safe mode. Anything will be greatly appreciated.
fdolande said:
I also have a button stucked, which you can easily see in the bootloader, as it scrolls automatically all the options. It is hw issue, but wanted to know if there is a kernel or someway in which I can disable the volume rocker entirely.
Is there anyway to disable safe boot when booted up into safe boot. I can install apps but they will not open due to the fact that I am in safe mode. Anything will be greatly appreciated.
Click to expand...
Click to collapse
Ya, now still dont have any solution yet..
Hope someone pro can help us.
Is it possible to get rid of the safe mode tru adb?
Tusnal said:
Is it possible to get rid of the safe mode tru adb?
Click to expand...
Click to collapse
Thanks you for reply. I'm sorry that I cant get to safe mode. Now my problem is My i9300 stuck on LOGO samsung.
I CANT go to recovery mode by Press VOLUME UP + HOME + POWER.
Any solution can force my i9300 to recovery mode??
Not sure if this is the proper section for this but thought I would post this here as I'm sure it would highly assist people in development and other tasks. This is the button combinations you need to enter each mode.
ODIN/Download Mode
Make sure your device is completely off
Key(s): Volume Down
While holding this key down simultaneously press the Power button until you see a disclaimer on the screen
Then let go of both buttons and press Volume Up to accept the disclaimer
Once the green robot is visible on the screen this indicates that handset is in now ODIN/Download mode
Recovery Mode
Make sure your device is completely off
Key(s): Volume Up
While holding this key down simultaneously press the Power button
As soon as the phone vibrates, let go of the Power button but keep holding Volume Up
When you see the "Samsung Galaxy S4" logo (not just the word "Samsung"), right after that, the next screen you should see is your recovery
Don't let go of Volume Up until you see your recovery
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
mikebuck69 said:
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
Click to expand...
Click to collapse
Sorry about that, small typo on copy/paste. Has been fixed.
Thanks!
No download mode
I've been trying to get into download mode for days and can't seem to figure it out. I have the Verizon g s4 sch-i545. I've done all of the key combos and even tried some combos + plugging in the USB cable. Nothing is working for me. Any help would be nice. Thanks
I have no problem getting into recovery mode....
mikebuck69 said:
It's not necessary to hold the Home button to boot into Odin mode, the combination for recovery is correct though.
So just power/volume down for Odin and home/volume up/power for recovery
Click to expand...
Click to collapse
Home isn't necessary for recovery either. I just hold power and volume up, when the phone vibrates I let go of power and continue to hold volume up until I see the booting recovery message in the upper left.
So nothing? Nobody can offer some advice?
Moto not working
So I'm having no success with this. I went through all the steps including flashing the pre-release tar ball (MD2). All this went without fail, however once I launched Motochop and pressed enter to root. I get line Daemon not on. run port 5873. Daemon connected or on and then thats it. I don't get a notification at any point prior to me pressing enter or afterwords that I need to accept. It just stops and I get "you should reboot" from the notification bar. Have I done something wrong? I went through all the prior steps several times and I keep getting this error message.
SonicJoe said:
Home isn't necessary for recovery either. I just hold power and volume up, when the phone vibrates I let go of power and continue to hold volume up until I see the booting recovery message in the upper left.
Click to expand...
Click to collapse
Agreed. Volume up and power for recovery. Volume down and power for odin.
Sent from my SCH-I545 using Tapatalk 4 Beta
Nice summary. Im getting my S4 any day now.
Sent from my Nexus 7 using Tapatalk 2
Well I have pushed volume down and power over and over and my phone will not enter odin.
thanks you !
Bdubois100 said:
Well I have pushed volume down and power over and over and my phone will not enter odin.
Click to expand...
Click to collapse
Don't just push them. You need to hold both until you feel the phone vibrate. Then you can let go of the power button, but keep holding volume down until download mode starts.
SonicJoe said:
Don't just push them. You need to hold both until you feel the phone vibrate. Then you can let go of the power button, but keep holding volume down until download mode starts.
Click to expand...
Click to collapse
When someone offers a debloat script that's in a Zip file and says "flash it to your device" do you think they mean flash it in Odin mode or flash using TWRP??
onearmsysiphus said:
When someone offers a debloat script that's in a Zip file and says "flash it to your device" do you think they mean flash it in Odin mode or flash using TWRP??
Click to expand...
Click to collapse
Flash it in recovery
Thanks SonicJoe. Starting to figure *some of this stuff out haha.
Issue
alrigth i got it to work. is there any way to move cwm backups to the sd card?
Odin Error
I am having one heck of a time flashing to the GS4 with Odin. I follow all of the steps to a "t" but cannot get the custom kernal onto the device. I'm having no problem getting to download mode and all the setting look to be correct, however when I start the Odin process I end up with a "fail" every time. I have been looking around the web for a few days for an answer, but so far this looks like the best thread to get help.
Make sure the kernel you are trying to flash is compatible with the Odin method. A lot of kernels can be flashed via custom recovery. The first thing I would do is uninstall and then reinstall the Samsung drivers. Make sure you have the latest and it is compatible with your computer OS. You would be surprised how often drivers can screw up Odin.
Sent from my SCH-I545 using xda app-developers app
my s4 is getting into download mode itself..
i got my s4 i9500 frm bangkok but now not accepting the network ...so tried to get in download mode n root it n then 2 chg the rom n try but its not getting into download mode itself wen i use (vol down+power+main btn) ... but its going in recovery mode alone wat can b done to dis??? can any one pls help it out>????
Please help. My s3 can only boot into twrp logo and stays there while flickering every few seconds. I have tried the volume up, power button and home button thing and still it does nothing but reboot to the same place. In short, I cannot enter recovery mode to re-flash my phone.
What about download mode? Volume down Power and Home button?
savor_savvy said:
Please help. My s3 can only boot into twrp logo and stays there while flickering every few seconds. I have tried the volume up, power button and home button thing and still it does nothing but reboot to the same place. In short, I cannot enter recovery mode to re-flash my phone.
Click to expand...
Click to collapse
What about entering download mode ? As it was stated above ? Then you can download last stock firmware for your region and flash it via Odin. Good source of original firmware is //samsung-updates.com/. Odin is available at many sites. If you run Win7 (or higher) on your PC you do not need any additional software, if not - proper drivers to see your mobile will be required. Then, if you do not want to stay with stock ROM, you can flash custom recovery and finally custom ROM chosen from dozens of them...
Recently did factory reset for my i9100, downloaded reboot manager and rebooted into recovery from that app.
Now I can't get out of recovery mode since power button doesnt work in there and my middle button is broken too.
VolUp and VolDwn work everywhere and I can turn phone on by power button.
Any help? I'm on 2.2.3
edit/ i also rooted the phone recently with kingroot via pc
Hi @noupls,
To get out of recovery mode, you need to take out your phone battery.
Once your phone is off, reinsert the battery. Then go into download mode (press and hold volume down + power button + home).
Once in download mode, flash stock ROM via ODIN (if you've already download the firmware files).
Saber.
With broken buttons, you're pretty much stuffed whatever you do with the device. You NEED to get them repaired/replaced ASAP.
In recovery, there should be an option
REBOOT SYSTEM (NOW)
With your broken buttons I'm pretty sure that'll be the only thing that works.