Hi there,
I noticed that every fortnight or so, my battery would stop charging at all. Does anyone know the reasons for this? For example, I always leave my phone charging at night when i go to sleep. Sometimes, when i wake up in the morning, i discover that the battery has not charged at all, and i am left with about 13% to last me throughout the day.
This is most often caused by the cable. The best option in such cases is to buy a new one. Don't worry, they are cheap, and many phones have the exact same cable, you may even have another one at home.
And if you don't remove the picture from your signature, a moderator will do it for you, you may even get banned.
Ianis G. Vasilev said:
This is most often caused by the cable. The best option in such cases is to buy a new one. Don't worry, they are cheap, and many phones have the exact same cable, you may even have another one at home.
And if you don't remove the picture from your signature, a moderator will do it for you, you may even get banned.
Click to expand...
Click to collapse
haha okayy. thanks for the help ^^ can small picture? ;p
PokMahPok said:
Hi there,
I noticed that every fortnight or so, my battery would stop charging at all. Does anyone know the reasons for this? For example, I always leave my phone charging at night when i go to sleep. Sometimes, when i wake up in the morning, i discover that the battery has not charged at all, and i am left with about 13% to last me throughout the day.
Click to expand...
Click to collapse
Are you using the wall charger or is the cable plugged into a computer?
Most operating systems have power saving features that will turn off USB ports when not in use (for example, when your phone isn't pushing data).
If it's a wall charger, check for any buzzing while it's plugged in. This could indicate a defective charger. Though, like the cable, the charger itself isn't all that expensive, either.
theanykey said:
Are you using the wall charger or is the cable plugged into a computer?
Most operating systems have power saving features that will turn off USB ports when not in use (for example, when your phone isn't pushing data).
If it's a wall charger, check for any buzzing while it's plugged in. This could indicate a defective charger. Though, like the cable, the charger itself isn't all that expensive, either.
Click to expand...
Click to collapse
Its a wall charger, the default one which comes with the O1
PokMahPok said:
Its a wall charger, the default one which comes with the O1
Click to expand...
Click to collapse
A healthy charger should make a high-pitched squeal when you put your ear to it. If it's defective, it'll sound like a lower-pitched buzzing or a humming.
A quick way to rule out the battery and phone would be to try charging it with another USB device and see if it charges regularly.
Luckily, the batteries for the O1 are cheap and abundant, and the charger can be had from anywhere.
Related
as i tire of hunting for hours for a thread i post. here goes...
for some unknown reason my g4 8125 wont charge. it went dead on the charger and i was thinking that my wall charger had freaked out. well after about a day of sitting i hit the power button and the lights came on! well it was a built up charge so i know the phone didn't brick. i put it on the usb cable to see if the red light would come on and no such luck.
any ideas? r they known for suddenly ignoring the charger??? any help is great!
oh and i haven't modded anything but the carrier unlock.
*i found on ebay a few that were selling with the charger port "broken" ... this a common thing? it able to be fixed if so?
rubledub said:
as i tire of hunting for hours for a thread i post. here goes...
for some unknown reason my g4 8125 wont charge. it went dead on the charger and i was thinking that my wall charger had freaked out. well after about a day of sitting i hit the power button and the lights came on! well it was a built up charge so i know the phone didn't brick. i put it on the usb cable to see if the red light would come on and no such luck.
any ideas? r they known for suddenly ignoring the charger??? any help is great!
oh and i haven't modded anything but the carrier unlock.
*i found on ebay a few that were selling with the charger port "broken" ... this a common thing? it able to be fixed if so?
Click to expand...
Click to collapse
I had a similar issue a few months back. It happens that the wizard needs a minimum charge on the battery in order to being able to charge. It´s like the charging connection is made by internal software.
Probably you drained too much the battery to a point that it no longer can sustain the cellphone on enough time so it recognizes the charger and it starts charging.
The workaround would be to jumpstart the battery.
There´s a post on thiss matter but in order to give you a straigth answer, you will need to find a low voltage source (better of 5volts or less, DC). Many users have used the usb port on their pcs, cutting out a cable.
Then you will need to remove the battery from the phone, and find the (+) and (-) sing. Probably you will find that there are more than 2 power connections on the battery. I assumed that the + and + were the most outer ones and it worked for me.
Then you would need to "connect" the power source cables to the battery. Beware of the polarity. keep the cables there for about 5-8 minutes so the battery would have a charge on it.
I personally used as a power source, a small 4 AA NiM rechargeable battery pack that gave me 1.2 volts x 4, meaning 4.8 volts. So even when the battery is only 3.7volts, a 5 volts power supply as the USB port, would do the trick. Just be carefull not to overcharge the battery. If you feel that the battery is getting hot, then probably something went wrong and you must stop and recheck the polarity. After 5 minutes the battery shouldn´t heat up too much on a 5volts surge.
To use the USB you just need to cut out an old usb cable that you don´t use (from an old mouse, or anything similar. Find the black and the red cables (the green and white are data cables, so don´t mess with those). and use them to connect to the battery with your fingers.
Tell us how it went.
thanks as always you guys are like the boy scouts...always prepared!
at least i think that's their motto...isn't it? anyway thanks a million
Went to sleep last night with my Atrix plugged in as I normally have had all my phones, was playing with it right before I went to sleep and everything worked just fine, woke up this morning and the phone will not power on!
First tried to power it on unplugged and the green light flashed for 2 seconds, and nothing happened. Okay, weird, but I'll go with it. Plugged it in, and the green light stays on now until I press the power button! Once pressed, it flashes off, flashes on for 2 seconds and stays off. Nice. I thought the green light meant it was fully charged - when I woke up this morning, it had no green light on, but it was plugged in just fine all night - grabbed my Jawbone ERA and plugged it in to the charger I had the Atrix connected to and it started charging right away, so I know it works....
Pulled the battery, tried plugging it in and power it on without the battery. Nothing. Tried putting in the battery and plugging it in again to "jump start it" as I had done yesterday when I first got it - apparently you can't just charge the thing when connected to a laptop if the phone is off, it will power on even if you power it off again! Nothing.
What the hell happened in it's sleep? I KNOW rooting it didn't cause sleep death.... This thing doesn't have a custom ROM or any undervoltage adjustments, so why the hell is it acting up??? Damnit, right when I got EVERYTHING set up the way I wanted it too.... can't bring it in to the store and give it up with all my personal stuff on there now, I need this thing to power on to wipe it first!!! I'm leaving it connected to the laptop with the green light on for a while and will see what happens in an hour or so....
EDIT - just searched for and tried to hard reset the phone from this thread, the phone still won't even power on to get to the recovery screen!!!
UPDATE - see below and use the SUPPLIED Moto AC charger or at least one with over 5.0V - NOT a PC and NOT a USB hub!
use the charger that came with the phone. My old HTC ones won't charge the phone for some reason. I bet your battery is just dead.
Did you use the provided charger? I tried plugging my Atrix in to the charger I used for my N1, and found that it did not provide enough current. With the old charger, after the phone died, I had similar symptoms where the green light would flash but phone would not come on. Plugged it in with the Moto provided charger, and 5 minutes later all was good...
I had the same problem. Thought I was gonna have to take it back to the store. I don't know what the problem was but I took the battery out for 5 minutes. Then I plugged it into the wall charger(wouldn't work with PC). I didn't turn it on for 30 min, just left it on the charger. Then I hit the volume rocker and it showed the battery charging symbol which it didn't do before. And then I was able to power it on
Same thing here. I purposely drained my battery on the first use. Plugged the usb cable into the PC and nothing. Same blinking green light with no response. I also thought I'd have to return the phone. Then for S & Gs I plugged it into the wall charger and it came to life. Once I got the battery charged a little bit I plugged it into the PC and it started to charge again. Don't know why, but it worked.
Have been running around the house trying to find valid outlets, and that does indeed appear to be the problem. I found it out the hard way though, should have kept an eye on the thread - used a power outlet instead of a PC USB connection and the screen fired right up! Yes, the phone showed the battery with 0% in it, but at least the screen finally came on!
How I have my phone set up normally is connected to my charging valet on my dresser, connected with a 15 foot USB cable that plugs directly into my desktop. Since the extension is good for just one USB connection, I have that connected to a USB hub and then a MicroUSB cable connects my phone from there. The Captivate, and all the other phones I've ever used, not to mention my Zune and Jawbone ERA, all eat that up and have no issues since the USB hub is powered not by the computer (seven USB cables is just too many for a single PC connection) but by the power outlet in the charging valet. I wonder if the hub is distributing the power requirement for each device and the Atrix needs more than others.
I also figured out that the Moto charger has a 5.1V output on it, as does my Jawbone AC charger. Now I need to start making sure that my each one of my chargers in the cars I own has that same type amount of juice too! You go up 29% in battery capacity and so do the requirements to charge it, huh?
Thanks for all the help, marking this SOLVED....
I used the charger in my bedroom that I've used for the Captivate and others before it and it didn't provide enough juice to charge the Atrix. It quickly switched between charging and not charging. I still had 40% battery showing when I woke up though which was nice. It had been off of charge since 10am yesterday.
Plugged it into an HTC charger and it's fine. The one that didn't work is not a modular charger so the power cord is hard wired to the plug.
Alright, a quick update.... Got the phone charged to 100% while it was off and plugged into the AC outlet with the Moto charger. Put my SIM card back in it - couldn't be without a phone all day! - and fired up the Atrix. Went to Battery Info to see what the status is and while plugged into my USB hub, it says
Battery Status: Discharging
Power plug: USB
....
Battery Voltage: 4124 mV (or 4.124V)
Click to expand...
Click to collapse
What the hell? Then I went right after that and plugged it into the Moto AC charger, it says:
Battery Status: Full
Power plug: AC
....
Battery Voltage: 4207 mV (or 4.207V)
Click to expand...
Click to collapse
Why are POWERED USB hubs and PCs not strong enough to charge the phone? I tried ALL my outlets in my vehicles just now and they ALL show full battery status and plugged into AC! Who screwed this up????
GarciaM25 said:
Why are POWERED USB hubs and PCs not strong enough to charge the phone? I tried ALL my outlets in my vehicles just now and they ALL show full battery status and plugged into AC! Who screwed this up????
Click to expand...
Click to collapse
Did you download the PC Charging Drivers that Motorola requires you to have in order to charge via PC and USB cable? If not, look here.
Battleship said:
Did you download the PC Charging Drivers that Motorola requires you to have in order to charge via PC and USB cable? If not, look here.
Click to expand...
Click to collapse
Wait, you have to have specific drivers on the PC so that the phone will allow a power cable (let's not even worry about it being a USB cable for a second) to charge the phone properly? I have the Motorola Media Link software installed, and that has a ton of drivers on it, that wasn't enough? MORE drivers are required to charge a cell phone? This is madness!
Sorry about the necromancy, but had this problem myself but it is NOT due to a lack of voltage. Thought I'd actually solve this, the problem is CURRENT.
USB2 ports will only ever supply 500ma which simply isn't enough to charge the atrix when it's dead. USB2 powered hubs won't supply any more than this either to meet the USB2 spec. The fact that the AC adapter works is because they tend to have a higher output current in the region of 1-2 amps (you may notice the phone, or any other device for that matter, charges faster with AC adapters for this reason).
On a similar note, cheap car chargers only output 500ma. I know with my desire I can have it plugged in and it charges, but if I use GPS it actually draws more current than it can charge at resulting in the battery draining (albeit, slowly).
So, make sure you have a higher current AC/Car charger, or alternatively, plug it into a USB3 port to charge as USB3 spec allows 900ma (some mobos output up to 1A) which is enough to charge the Atrix.
Stewge said:
Sorry about the necromancy, but had this problem myself but it is NOT due to a lack of voltage. Thought I'd actually solve this, the problem is CURRENT.
Click to expand...
Click to collapse
Hey, no problem, if there's something I misstated, then please, correct it!
Stewge said:
So, make sure you have a higher current AC/Car charger, or alternatively, plug it into a USB3 port to charge as USB3 spec allows 900ma (some mobos output up to 1A) which is enough to charge the Atrix.
Click to expand...
Click to collapse
Not sure about this..... It's been about a year since I got all my USB3.0 gear, and I was super excited about it because I thought that my phone would charge ridiculously fast because of the added output, but I remember reading that 3.0 uses extra pins and those pins account for the added voltage and bandwidth of the cable - we don't have those extra pins when you step down from 3.0 to 2.0, so we lose the ability to charge devices faster as a result. I don't know if I actually proved that theory, but after I read up enough on it, I thought I just didn't have to with that knowledge..... again, correct me if I'm wrong, I've got a lot of 3.0 gear here!!!
GarciaM25 said:
Not sure about this..... It's been about a year since I got all my USB3.0 gear, and I was super excited about it because I thought that my phone would charge ridiculously fast because of the added output, but I remember reading that 3.0 uses extra pins and those pins account for the added voltage and bandwidth of the cable - we don't have those extra pins when you step down from 3.0 to 2.0, so we lose the ability to charge devices faster as a result. I don't know if I actually proved that theory, but after I read up enough on it, I thought I just didn't have to with that knowledge..... again, correct me if I'm wrong, I've got a lot of 3.0 gear here!!!
Click to expand...
Click to collapse
There are indeed extra pins in the USB3 standard but these are to transmit data only. The original USB2 data pins are only there for legacy support and USB3 transmissions use the extra lines. There's still only the 1 VBUS pin which supplies the +5V power. There's also no harm in offering higher current on the connection as a device will only ever draw as much current as it needs until it tops out the supplier, not the other way round
EDIT: Another solution could be to use a splitter cable (common with 2.5" drives)so you can draw from 2 ports, but with a micro connector. I've never actually seen one with USB micro but a quick look on ebay says they do exist
nsaia said:
Same thing here. I purposely drained my battery on the first use. Plugged the usb cable into the PC and nothing. Same blinking green light with no response. I also thought I'd have to return the phone. Then for S & Gs I plugged it into the wall charger and it came to life. Once I got the battery charged a little bit I plugged it into the PC and it started to charge again. Don't know why, but it worked.
Click to expand...
Click to collapse
Hi, can I know that when you plug it into the wall charger, is there any light on? Mine has no light on when plug to wall charger. But I can get the light green when plug into PC USB. Can you share that?
cscmf99 said:
Hi, can I know that when you plug it into the wall charger, is there any light on? Mine has no light on when plug to wall charger. But I can get the light green when plug into PC USB. Can you share that?
Click to expand...
Click to collapse
This is the exact same issue that I am facing now. Did you ever manage to find a solution for this problem?
atrix 4g not coming on
Is there any real fix to this issue i have search high and low and all i am seeing people talking about the battery id dead ... i have two battery that is fully charger and the phone still not coming up.
Hi all, sorry that im posting after two years ago but i am facing exactly the same problem, but i plugged it in my USB port, wich i think its a usb2, and i got the screen on but the cellphone did not say charging instead of that was connect your charger, and it was lower than 3% then it turned off. What can it be a solution??
None of the avobe solutions worked?
Which rom/kernel are you using?
I too have this same issue. My Atrix won't come on. I have 2 of the same phone. I tried the charger and cable from both phones. Neither work. When I first plug it it, the green light comes on for a few seconds then it goes out. I even opened the phone and removed the battery. Used a voltage tested and found my battery has 3.7 volts. Thats almost 100% charge. So it not a problem of power. I plugged the phone to my computer and same green light for a few seconds then gone. Won't do anything. No battery display or anything. I even did the simulated battery removal procedure. Didn't work. Is there anything else I can try? Can't get to recovery mode without display unless someone has a fix for that?
I have a ton of micro-USB chargers that I've used with my GNex and Evo3D with no issue. The only consideration I take into account is Amperage, and I toss the ones below 800 mAh. Last night I plugged into one thats around 850 mAh and left my phone to charge all night (at around 5%). When I woke up, the phone had completely discharged without any sort of recharge.
Since this isn't a Nexus phone, am I locked in to only using verizon branded chargers? Is there a way to defeat that with root?
I haven't had any issues with that as I use all different types. Maybe just try another or maybe it wasn't plugged in all the way.
What voltage is it rated at? It could be that or that the charger is bad somehow. I charge mine nightly with a .7A charger and it's always been full when I wake up (about 30-50% when I go to sleep).
I have the sprint note 2 but they are essentially the same phone so here is what Igot for you:
there is no "smart" element to any chargers in the market, so your phone shouldn't know the difference between Verizon brand and the devil's own brand
if you look at the stock charger it outputs 2 amps...the phone needs this and in my experience it needs at least 1 amp in order to charge instead of discharging slower
also there is a known issue with all note 2s that the cable will not sit snugly inside the port causing it to be a bad connection... just make sure you put it in hard (no pun intended) and it shouldn't be a problem
Sent from my SPH-L900 using xda app-developers app
Sent from my SPH-L900 using xda app-developers app
Yeah, if you take a close look at the micro-usb port, it is recessed a bit. Make sure you plug the cable in firmly.
reinaldistic said:
also there is a known issue with all note 2s that the cable will not sit snugly inside the port causing it to be a bad connection... just make sure you put it in hard (no pun intended) and it shouldn't be a problem
Click to expand...
Click to collapse
I think this was likely the issue. The charger is rated at 1 Amp, and I tried it out again last night and it appeared to work for the few seconds I had it plugged in, so I must not have had it in there snugly.
So I just tested with the same charger, and when I plug it in, it beeps every half second and flashes between the charging/discharging symbol, and does not charge...
apols said:
So I just tested with the same charger, and when I plug it in, it beeps every half second and flashes between the charging/discharging symbol, and does not charge...
Click to expand...
Click to collapse
I don't remember where, but I remember reading about someone with this issue where they were using their phone as a gps while charging it and it died. Someone commented saying that the culprit was probably a faulty charger. Sounds like they were right.
apols said:
So I just tested with the same charger, and when I plug it in, it beeps every half second and flashes between the charging/discharging symbol, and does not charge...
Click to expand...
Click to collapse
I have seen this same thing with two Droid X's plugged into the same 2A charger. One phone would charge and the other would do exactly as you describe. It didn't do it all the time, it just depended on how low the battery levels were on each device. How much battery life do you have left when it does this? You may just need to use a higher amperage charger.
I have not received my Note II yet, but it sucks that I will most likely not be able to charge it while tethered (USB) to my laptop.
Based on the info I could find (kernel driver), the phone will accept up to 650mA of power, so anything over that should charge the phone at the same rate. Voltage shouldn't be an issue as it is charging via USB, which is 5V (+/- 5%). Unless someone has an amp probe to put on it, we can't tell if it is actually pulling more or less than what the driver specifies. And, as someone else stated, the phone can't tell if you're using a genuine Samsung cable and charger, or a $1.00 made in China cable/charger, as long as they both output the same voltage/amperage, the phone will never know the difference.
Based on what you said though, if the phone is constantly seeing the charger connect/disconnect, that would drain the battery even faster.
Hi,
I plugged my charger in backwards and I fried my battery last year. There are names, numbers and texts I need to see for legal reasons. Can anyone help me power up the phone, I don't care if I can't use again. I'm just looking to download to my computer through the USB link, but I need the circuits to fire up. Thanks.
PS. I have an adjustable power supply, both Voltage and Amperage.
dberladyn said:
Hi,
I plugged my charger in backwards and I fried my battery last year. There are names, numbers and texts I need to see for legal reasons. Can anyone help me power up the phone, I don't care if I can't use again. I'm just looking to download to my computer through the USB link, but I need the circuits to fire up. Thanks.
PS. I have an adjustable power supply, both Voltage and Amperage.
Click to expand...
Click to collapse
I took it apart and tried applying 3.8 volts to the disconnected battery terminals. Nothing, not even an amp draw.
dberladyn said:
I took it apart and tried applying 3.8 volts to the disconnected battery terminals. Nothing, not even an amp draw.
Click to expand...
Click to collapse
You can try with a battery from a different phone. Just make sure to connect the third wire(sense pin) so the phone knows there is something it the battery. It should work this way.
Thanks, I bought a ten dollar replacement battery. I will wait until it arrives. I am ever going to be upset if it's all I needed last year., but then I likely couldn't have waited a month until it arrived here. By the way, I didn't realize that there was a "sense" pin. That must be the metal tab holding the battery in.
Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
CosMiiK said:
Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
Click to expand...
Click to collapse
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Thank you! Just ordered one.
What is the point of using that thing are you guys saying you keep it plugged into the phone all day long? Wouldn't that get in the way or be annoying?
Swimguy14 said:
What is the point of using that thing are you guys saying you keep it plugged into the phone all day long? Wouldn't that get in the way or be annoying?
Click to expand...
Click to collapse
This phone can pretty much be charged once a day with the way most of us are using it. Having it slowly charge over night with wireless charging may be less straining in the battery. I'm tempted but so far I just charge to around 80% at night before bed and unplug overnight.
I was looking at that one on Amazon. Seems like the gold one on there may be better?
My question is, if you have to plug the wireless charging card into your USB C port anyway, does that defeat the entire purpose? Not dissing it or anything, that's very subjective, but.....
H4X0R46 said:
My question is, if you have to plug the wireless charging card into your USB C port anyway, does that defeat the entire purpose? Not dissing it or anything, that's very subjective, but.....
Click to expand...
Click to collapse
That's what I was thinking
Swimguy14 said:
That's what I was thinking
Click to expand...
Click to collapse
Just remove cable. No big deal I have done this. Plus I don't use the dongle only Bluetooth headphones.
The reason that I use a wireless charging receiver pad plugged into my usb-c is because I've seen more than one of them go bad on other phones.
Besides the power button, the next most likely part of a phone to fail is its charge port. Likely because of sheer mechanical wear and tear on both these components. Which is why I use gestures to turn on and off my display, and that wireless receiver.
However, it's not without drawbacks:
- I'm not sure that having something perpetually plugged in doesn't stress the port much less than taking something in and out. But I figure it does.
- It's a pain to use the port for anything else, like otg drives or wired headphones or adb
- dash charging is WAY faster than wireless
CosMiiK said:
Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
Click to expand...
Click to collapse
Why would you like to have a wireless charger? The cable charging is amazing is so fast. I normally charge round at 30 percent and I went to play battlefield 5 two games my phone will be fully charged is so fast. Not worth it to get a wireless charger. But is your phone do what you want I'm just here to give you a opinion lol
CosMiiK said:
Thank you! Just ordered one.
Click to expand...
Click to collapse
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic for Edu Birdy website. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Thanks. This battery fixed my problem.
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Does it work if I have the terminal with the original red case?
Lack of wireless charging is my only real gripe with the 6T. This sounds like a good solution if you never plan to use the USB port. I like the quick wired charging but having the option for wireless would be a good feature. How hard could it have been for OnePlus to add? Is the back case metal? It looks like glass to me.
Just easier for me to plug in my USB-C slow charger. Not sure what the advantage is to doing this. If you put it between the back of the phone and a case, I get it. Just plugging it into a USB-C wireless receiver seems like a waste of 15 -20 bucks for zero gain. At least for me.
I bought this one so I can still charge it if needed. https://www.amazon.com/gp/product/B07QNW32V4/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1