i have rooted My xperia x10i today. But i cant boot into xrecovery.. I was thinking that my phone has not been rooted yet but when i again tried to root it with superoneclick software it said that deivce is already rooted..
I also tried to install xrecovery from market.. I installed the app and opened it and clicked the button "Install xrecovery" a message apperaed for a litle time saying permission granted to xrecovery by superuser... After that there is a cross sign on the option under that button.... I watched a video in which instead of cross mark there was a tick mark... What is this??? and y?
Download Flashtool. Links are in the dev section. It will root/install xRecovery/do everything else for you. From now on, Flashtool is your best friend.
tHANKS ALOT... I HAVE GOT XRECOVERY BOOT... HURRAY.. i AM VERY HAPPY NOW....... nOW PLZ GUIDE ME HOW TO INSTAL A CUSTOM 2.3.3 ..... i WILL PRESS THANKS BUTTON FOR U.. THANKS ALOT...
waqar_shah said:
tHANKS ALOT... I HAVE GOT XRECOVERY BOOT... HURRAY.. i AM VERY HAPPY NOW....... nOW PLZ GUIDE ME HOW TO INSTAL A CUSTOM 2.3.3 ..... i WILL PRESS THANKS BUTTON FOR U.. THANKS ALOT...
Click to expand...
Click to collapse
so again it´s in the development thread but short
Check if the desired rom need unloked bootloader if yes well there is a plugin in xda´s flashtool just use it and it will be fine
Maybe you want to backup your aps via titanium backup.
so if needed flash the desired/required Custom kernel. some roms only work with special kernel´s
Place Kernel´s wifi zip and the zip of desired rom on SD Card
Start xrecovery or cwm most custom kernel´s got both you see in rom description where to flash from.
but for both recovery´s you should wipe data(factory reset) and wipe dalvik Cach (advance settings)
if battery s full 100% it also fits that you can wipe battery stats. maybe your x10 will last 1-2 hours more
flash first the rom itselfs: Install Custum Zip/choose Zip/(Serch zip on sd) Flash
maybe there´s a need of flashing a hotfix same procedure
Flash the wifi modules zip for the kernel if needed
Reboot device (maybe on forst boot it stocks at bootscreen the just pull out the
battery and wat 1-2 minutes than put it back in and try again)
So now your on a custom rom. Many roms got the setup so of needed go thru setup procedure and welcome on your costum droid Xperia x10
After setup or after first enter on home screen reboot device first before you install anythinG it settles the rom to work better/properly
For notice most custom roms need a few hours to settle so dont be to hasty if something doesnt work right properly.
If i helped feel free to thank me
If you dont know which rom to use feel free to pm me i tried many ^^
greets darkmind
Related
hi every one first sorry for my bad english so i want to install version recent of android 2.2 or 2.3 what i can install chose for me the best fixed one (no bug for example bluetooth camera wifi etc...) and show me step by step how i can install it first how i can get the backup to can restore my phone if is endamaged
and the other step thank you ^_^
Up up up please ..??????
Firstly install recovery use quagg's AIO Automatic installation script, now boot into xrecovery by pressing back key repeatedly, in xRecovery menu use back up and restore to create backup...
for installing rom, download any rom available for mini or mini pro, select the best by checking the reviews,
Place the ''your rom.zip'' on your sdcard and boot in recovery by pressing back key repeatedly when u see sony ericsson on screen, after u got into recovery menu, select option install update.zip from sdcard , select the zip and ur done now reboot ur phone and enjoy ur froyo(2.2) or gingerbread(2.3)
ps: use volume rocker to move up or down in recovery menu and home key for selection!
Firstly install recovery use quagg's AIO Automatic installation script, now boot into xrecovery by pressing back key repeatedly, in xRecovery menu use back up and restore to create backup...
for installing rom, download any rom available for mini or mini pro, select the best by checking the reviews,
Place the ''your rom.zip'' on your sdcard and boot in recovery by pressing back key repeatedly when u see sony ericsson on screen, after u got into recovery menu, select option install update.zip from sdcard , select the zip and ur done now reboot ur phone and enjoy ur froyo(2.2) or gingerbread(2.3)
ps: use volume rocker to move up or down in recovery menu and home key for selection!
Thank you Man You Can Help Me To choose best RoM and How i can get BAck up of my phone to protect it
Thank you Man You Can Help Me To choose best RoM and How i can get BAck up of my phone to protect it
For me the best rom is SonyBread v2.0 its gingerbread 2.3.4 and looks and feels awesome and u cant get a beetter explanation than what galvic has just given on how to install a custom rom lol
Thhumbs up Galvic!
..::XDA RocK::..
farhanino said:
For me the best rom is SonyBread v2.0 its gingerbread 2.3.4 and looks and feels awesome and u cant get a beetter explanation than what galvic has just given on how to install a custom rom lol
Thhumbs up Galvic!
..::XDA RocK::..
Click to expand...
Click to collapse
bro You can Pass Me Link Of subject Android gingerbread 2.3.4
The best roms available:
SonyBread 2.0 by paul-xxx
slade87's CM7
D4 froyocomb
I prefer slad87's CM6 v6 it has everything and my personal favourite...
You've mini or mini pro???
if have mini dont intall any of the above mentioned roms
Remember quagg's script install xRecovery flash xrecovery compatible rom, or install cwm for cwm flashable zip....
in recovery menu theres an option ''BACKUP AND RESTORE'' use it for back up... And restore..
galvic said:
Remember quagg's script install xRecovery flash xrecovery compatible rom, or install cwm for cwm flashable zip....
in recovery menu theres an option ''BACKUP AND RESTORE'' use it for back up... And restore..
Click to expand...
Click to collapse
ThanK You ^^
galvic said:
You've mini or mini pro???
if have mini dont intall any of the above mentioned roms
Click to expand...
Click to collapse
I haVE mini pro
PleasE Pass ME Link of subject Sonybread 2.0 I don T find it i find just sonybread 3.0 pre final
hey guys,
I really need your Help!
I've flashed Trips Froyo Miui 1.7 ROM.. so far so good everyting worked great. Then I wanted to flash Z's zKernel but it didn't work, so I tried FreeKernel mod 3.60, but it also didn't work.
When I wanted to reboot phone after flashing FreeKernel it didn't boot up custom Kernel and after booting up the sytem I recogniced that I don't get a signal and sd- card doesn't mount. So I rebooted phone and hoped that everyting would work, but it didn't. So I turned off phone and wanted to restore a working rom via xrecovery, but I sadly had to notice that I can't boot into recovery anymore.
So when I boot up phone it always shows "Prozess system doesn't react" or something like that.
I really don't know what I can do now, so please help me!
greez kalack
If you can, plug in your phone in with flashtool open, if it reads the phone (tells u that busybox is found) then hit ask root perms and then install recovery.
I have already tried that, but it didn't find my phone..
kalack93 said:
I have already tried that, but it didn't find my phone..
Click to expand...
Click to collapse
2 options i guess:
1. reinstall stock rom from flashtool or
2. reinstall stock rom from SEUS/PCC
OK I'll try that and I really hope it works.
Flashing stock rom via flashtool worked.
Thanks for your help!
Good evening
My x10i runs on a 2.2 by zhidzu and I want to get back to official SE and update to 2.3.
I connect to SE PC companion and when I try to update it, in preparation process I get a message saying that installation is not possible. Please can someone help me?
Thanks
Why dont u flash custom roms directly since you are already using a custom rom?
thanks for the reply!
I tried to backup phone to first setup but nothing... I have rooted it through z4root and the only 2.3 that I found is the official and some custom under development. I hate the fact that camera doesn not work normal and has only the "macro" option.
There are many good roms in the development section (http://forum.xda-developers.com/forumdisplay.php?f=617&order=desc).
I personally like Wolf's rom, as it is very stable, and has Bravia & xLoud in it.
http://forum.xda-developers.com/showthread.php?t=1192988
damn! Phone stuck at SE logo!
MAYDAY! Please help!!!
Hi, which rom did you flash? And it is normal for the phone to load a little longer (wait up to 5 minutes) for its first boot.
I put in SD wolf's rom, "install custom zip" through xRecovery, reboot, the end...
I have SE logo for 15'. Nothing happens
Wolfbreak said:
How to install this ROM?! [Fresh Install]
Reboot into xRecovery and make a back-up of your current ROM. (You'll need a working xRecovery or else it will say Device/SD Card busy).
Wipe the following in xRecovery:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
Go to install Custom Zip and choose Wolf_GB_2.3_TW_V4.zip
The following steps are only required if you don't have the new 2.3 kernel and .71 baseband, if you do have them you can reboot your phone and enjoy this ROM.
Turn off the phone by taking out your battery when ROM installation is finished
Open Flashtool and flash the FTF Bundle I made available for download. Press on Flash and follow the steps given to put your x10 into flashmode and flash the baseband and kernel.
When Flashtool is finished you can plug out the USB, turn your phone on and enjoy this ROM!
Click to expand...
Click to collapse
Did you follow the instructions here? You will need to follow ALL instructions, just installing with custom zip will not work.
FINALLY!!! I made it! My mistake was the flashing and phone was not able to read sim. Thanks a lot!!! 100000 thanks for your time and your help!
No problem.
You can use wotanserver
I installed Wolf's rom but I do not see the Bravia engine option. Can you help me a bit?
Just flash this with xRecovery.
http://forum.xda-developers.com/showpost.php?p=17030090&postcount=9349
Hai guys...
Im using Xperria mini pro..
My phone is rooted and i want to have cwm in it..
I use the method of se tweek installer.
When my phone boots i pressed volume down key for many times, but it freeze in the white sony ericsson logo..
I cant get into cwm..
Any idea pls...
Try to have a look at this guide
http://wiki.cyanogenmod.com/wiki/Sony_Ericsson_Xperia_Mini_Pro:_Full_Update_Guide
your phone stuck in boot loop? or what?
how about you try this method..
if i am rooted instaled cmw recovery it is any costumized rom to install or all req bootunlock ?
gigel87 said:
if i am rooted instaled cmw recovery it is any costumized rom to install or all req bootunlock ?
Click to expand...
Click to collapse
all u need to install custom rom and kernel is unlocked bootloder.
cant get still
im getting freeze on se logo if i press volume down button else my phone boots properly.. any idea guys...
create acc on wotanserver (google) download that aplication from there open aplication , power off the phone and atach usb cable then remove and put the batery and only read what wotan say there on app (select language , your oficial rom and wait to donwload & to install after u only read there on app "disconect and power the phone on"
sry for my enghlish
im having no problem with booting and working of my phone.. My phone works perfectly..
The only thing s that i cant enter in cwm mode... when i try then it freezes in se logo...
http://forum.xda-developers.com/showthread.php?t=1345741 read it is work don`t hurry when u do this ...
up i ask a q but didn`t say corectly my phone it is loked by operator (dont want to unlock) my bootloader it is locked (i do the test point but it works only if i unlock the phone) so any costum rom to instal if i have cwm recovery + root ? my phone don`t enter to fast boot mode to install kernels
still negative
i tried it bro.. but still it freezes at se logo..
gigel87 said:
http://forum.xda-developers.com/showthread.php?t=1345741 read it is work don`t hurry when u do this ...
up i ask a q but didn`t say corectly my phone it is loked by operator (dont want to unlock) my bootloader it is locked (i do the test point but it works only if i unlock the phone) so any costum rom to instal if i have cwm recovery + root ? my phone don`t enter to fast boot mode to install kernels
Click to expand...
Click to collapse
I have applied this method for my mini pro & it worked for me well, backup of rom works with wipe data & dalvik cache as well, though didn't tried yet to install any zip file from it
not working guys,,,
Same problem here...
Guys i tried se tweek installer, install cwm.bat, and also manual method. but nothing works. it always freezes if i press volume down key.
Is there any other method to install cwm or any alternative to cwm to install mods..?
There are different kernels available that are compatible with the stock rom and include CWM recovery and various mods for overclocking or TUN/TAP, ...
But those kernel needs unlocked boot loader man.. I want cwm in locked bootloader.
could anyone just post an stock kernel with cwm installed.
As ftf format so that i can flash it with flash tool.
Hey guys, so I downloaded cm9 and tried to install it on my phone.
I got it from this link and also followed the video tutorial there: http://forum.xda-developers.com/showthread.php?t=1500234
I had rooted my phone and had CWM recovery v5.0.2.6
Now when I try to reboot, there is just an blue screen.
I did exactly like in the video, I tried 2 times. Still it didn`t work. Please help. Could someone provide any step by step instructions other than the video?
Thanks.
I think you needed to use with CWM 5+
Try to get back into CWM and root your old ROM.
I am very bad at this... So I dont really know how to do that... could you provide any steps or an tutorial?
Edit:well I tried to format sd card and system but nothing. Could someone provide a link to gingerbread 2.3.5 and a way Icould put it on my phone? Also, could I do anything with samsung kies?
Kritosein said:
I am very bad at this... So I dont really know how to do that... could you provide any steps or an tutorial?
Edit:well I tried to format sd card and system but nothing. Could someone provide a link to gingerbread 2.3.5 and a way Icould put it on my phone? Also, could I do anything with samsung kies?
Click to expand...
Click to collapse
NO NO. Don't use kies. Kies sucks a lot. Search the developer forum for "clockworkmod 5" flash it normally (I suppose you already know how-to since you have CWM4) after getting CWM5, flash ICS/CM9 Normally. no need to flash GB
Here is cwm 5
http://forum.xda-developers.com/showthread.php?t=1291327
Sent from my GT-S5830 using Tapatalk 2 Beta-5
Thanks guys, okey I have everything ready for next try ( After I get my phone to work again) Right now I am looking for Cooper ops file, so I can flash to 2.3.5 (france version but I guess it works) so could anyone give me a link to cooper ops file so I get my phone working?
Thanks.
EDIT: wooohooo found cooper ops, atm odin is downloading the files. I see what I can do after that. Thanks for all the help.
Kritosein said:
Thanks guys, okey I have everything ready for next try ( After I get my phone to work again) Right now I am looking for Cooper ops file, so I can flash to 2.3.5 (france version but I guess it works) so could anyone give me a link to cooper ops file so I get my phone working?
Thanks.
EDIT: wooohooo found cooper ops, atm odin is downloading the files. I see what I can do after that. Thanks for all the help.
Click to expand...
Click to collapse
Glad we could help, be carefull next time. Always try to use newest software.
Ughh I forgot to root my phone right after flashing. So I installed CWM before rooting.. how do I root now? And also I think it is still not working. The phone has been blue for about 2 minutes now. I followed the video exactly like it was.
EDIT: damn... so after getting the blue screen again I thought of going back to normal ver and maybe some other custom ROM... but guess what.... It doesnt work anymore... I did just like before.Went into download, used ODIN to download 2.3.5 french ver to my phone, odin says PASS. But last time It had booted correctly by 4:40 or so. This time like 10 minutes have passed and still rebooting. What to do now?
EDIT2: Am I allowed to make a new thread since the problem is not with cm9 anymore?
here, check this out:
http://forum.xda-developers.com/showthread.php?t=1291327
download it and flash it through stock recovery
i dont think you need to root it before flashing this (i didnt)
i just flashed this over the stock rom (non rooted) and then flashed cm7.2
i too had such problems but dont worry flash some stock rom with odin then it wont boot so remove your battery and place it again.now go to stock recovery wipe data/factory reset and wipe cache partition then reboot.then use cwm 5 to flash cm 9.
noobdroid_90 said:
here, check this out:
http://forum.xda-developers.com/showthread.php?t=1291327
download it and flash it through stock recovery
i dont think you need to root it before flashing this (i didnt)
i just flashed this over the stock rom (non rooted) and then flashed cm7.2
Click to expand...
Click to collapse
I have that, and I am trying to flash cm9.
So.. I`m kinda at the beginning again... I tried some other roms, but non were as good looking as that cm9 ICS beta 6.
Could anyone give me step by step tutorial? Because I did EXACTLY like in the video. 2 times. And it still didnt work. Please help.
Well here what have done for flash th rom for the first time:
-I was on gingerbread 2.3.6 XWKS2 (my device was root by super one click and i flash CWM 5 via recovery)
-Then i put the rom in my sdcard, reboot in recovery (press home and power button)
'
-Into recovery i wipe cache partition and wipe data, go in advanced and wipe dalvik cache go back to the main menu and select install zip from sdcad choose the file you have(here it's cm_ace-ota-eng.01042012) then press yes wait a while (the rom are installing) then when it's done select reboot system now.
-The first boot take a while (and i have the blue screen too you just have to wait but if it's exceed 5-10 minute try to reflash the rom)
I do that will all rom i have install and i don't have any problem. Hope i help you
*Sorry if my english is bad
Danceslas said:
Well here what have done for flash th rom for the first time:
-I was on gingerbread 2.3.6 XWKS2 (my device was root by super one click and i flash CWM 5 via recovery)
-Then i put the rom in my sdcard, reboot in recovery (press home and power button)
'
-Into recovery i wipe cache partition and wipe data, go in advanced and wipe dalvik cache go back to the main menu and select install zip from sdcad choose the file you have(here it's cm_ace-ota-eng.01042012) then press yes wait a while (the rom are installing) then when it's done select reboot system now.
-The first boot take a while (and i have the blue screen too you just have to wait but if it's exceed 5-10 minute try to reflash the rom)
I do that will all rom i have install and i don't have any problem. Hope i help you
*Sorry if my english is bad
Click to expand...
Click to collapse
Hey, this is exactly like in the video, I tried that. But this time I am going to first use odin to put XWKS2 2.3.5 on my phone, and then root using SuperOneClick (Last time I used udp1 or something like that) and then try again.
Kritosein said:
Hey, this is exactly like in the video, I tried that. But this time I am going to first use odin to put XWKS2 2.3.5 on my phone, and then root using SuperOneClick (Last time I used udp1 or something like that) and then try again.
Click to expand...
Click to collapse
Ow sorry then but i just tell you the method i use i do not remark that
But it's strange your device do not flash propely and i saw you've try a lot of thing I'm speechless for the moment just tell us if you succeed to flash cm9.