I just downloaded the İCS REMİX ROM and the next version came out a few hours later... =.= I don't really want to waste a few hours flashing the updated version and customizing the stuff all over again. Are there any ways to just 'update' it instead of flashing it after wipe? I heard something about update.zip but do I need to get that from the developer or can I turn the CWM backup into one of those?
This is the link for the rom: http://forum.xda-developers.com/showthread.php?t=1436854
Thanks!
why do not you ask at that thread if you can update w/o wiping instead of opening a new thread here.
anyway you can make a nandroid, then wipe cache and dalvik cache and then flash the updated version. if it gets stucked at any point while after flashing. you can get back to CWM and restore your Nandroid you made earlier.
Cheers.
You should be able to flash that update without wipe
Sent from my GT-I9100 using XDA App
I just made my account... so I can't post there :/
mariosraptor said:
why do not you ask at that thread if you can update w/o wiping instead of opening a new thread here.
anyway you can make a nandroid, then wipe cache and dalvik cache and then flash the updated version. if it gets stucked at any point while after flashing. you can get back to CWM and restore your Nandroid you made earlier.
Cheers.
Click to expand...
Click to collapse
That rom is just a CWM backup, so I guess you are saying that I need to use advanced recovery. So which part of the updated rom backup should I choose to recover?
Related
I have a quick question. I'm in Joelz 2.3.3 at the moment but I've been wanting to try a 2.3.4 rom. So i've been wondering, when flashing to one. What all do I have to update and how? I believe change the name to PGsomethin and let it update through hboot? Then do I delete it or keep it on the card? And when flashing back to an 2.3.3 Rom will everything be okay?
Sent from my PG86100 using XDA App
Rom's come in a zip format. Boot into recovery (use the 4 in 1 or an app such as quick boot) once in recovery wipe cache and davlik cache at a minimum. You may need to do a full wipe of data, cache and davlik. Or you can use a tool like superwipe which reformats boot, system, cache, and data partitions. Usually a wipe of cache and davlik works as long as the ROMS have a similar base. Once that is done select flash zip from sd card, then select the zip of the rom you want. Then flash that sucker. when it is done it will tell you, then go back a couple menus and reboot. Presto you're done. The first boot after a davlik and cache wipe may take a while so be patient.
Once you are done you can delete the zip from the sd card.
If you are going from 2.3.3 to 2.3.4 you may want to flash the radios from 2.3.4. the ROM thread should have this info if required or recommended.
Going back to 2.3.3 is just as easy just put the 2.3.3 ROM on the card and flash that in the same manner.
Word of advice is to always make a nandroid backup, its under backup then usually choosing the boot, data, and system partitions will suffice. This way if you do something that totally borks the phone you can volume down and power to get to recovery then restore the nandroid and you are right back where you started no harm no foul.
Good luck. Also if you check the wiki's most of this info is in there if you need more detailed instructions.
Thanks
Sent from my PG86100 using XDA App
Last night, I installed TW 4.5/TW Manager. I did a ClockworkMod backup first. I decided to restore it.
However, after restoration, the phone is in a factory state. Save for my lock pattern, which it remembered, the phone is in first-run setup mode, all my home screen layouts are gone, all my apps are not in the aop drawer except those the G2 ships with. Contents of the virtual SD card like photos are still there.
I tried restoring my only other CWM backup (a November backup that previously *restored ok* to undo a MIUI test, for example), but this, too, now boots in to the same state.
What has gone wrong here?
And is there any way of getting back the system that I assume/d is/was in the CWM backup files?
If I can't guarantee I can restore a CWM backup, it makes the world a very scary place to be.
Did you wipe before restoring? Sound to me you did not.
1. Full wipe
2. Restore again.
If that does not work, wipe again and use advanced restore.
Don't use rom manager but do everything manually from the recovery.
Wipe what?
You mean, choose Wipe Data and/or Wipe Cache?
Lennyz1988 said:
Did you wipe before restoring? Sound to me you did not.
1. Full wipe
2. Restore again.
If that does not work, wipe again and use advanced restore.
Don't use rom manager but do everything manually from the recovery.
Click to expand...
Click to collapse
Wiped data, Wiped cache, Restored backup - still doesn't retrieve the actual backup.
Now wiped again. In Advanced Restore, what should I do?
Lennyz1988 said:
Did you wipe before restoring? Sound to me you did not.
1. Full wipe
2. Restore again.
If that does not work, wipe again and use advanced restore.
Don't use rom manager but do everything manually from the recovery.
Click to expand...
Click to collapse
Restore the boot, system, data.
Lennyz1988 said:
Restore the boot, system, data.
Click to expand...
Click to collapse
This doesn't work either.
I had the same trouble early last month; even after a restore it was pretty much factory settings and I had to put everything back myself.
It was very irritating as I'd taken the precaution of making a backup but it still didn't work. I've pretty much recovered everything I needed to since then, though.
What excactly did you do prior to the restoring? Did you flash a new rom? If yes, what was your previous rom? Or is TW4.5 an app of some kind?
Lennyz1988 said:
What excactly did you do prior to the restoring? Did you flash a new rom? If yes, what was your previous rom? Or is TW4.5 an app of some kind?
Click to expand...
Click to collapse
I did this... http://forum.xda-developers.com/showthread.php?t=1365605
That is...
Installed TouchWiz 4.5, a modified TouchWiz launcher (left it alongside TouchWiz, set no default - home button press asked for confirmation of home screen each time)
TW4.5 comes with the TW4Manager app for controlling settings.
I downloaded the Suava theme for use with TW 4.5.
Before any of that, I made a CWM backup. Then I did the above. Now the backup (and even a backup which restored perfectly a month ago) will not restore to anything but factory new state.
And you are not getting an error message of any kind? How long does it take to restore? What is the size of the backup?
Lennyz1988 said:
And you are not getting an error message of any kind?
Click to expand...
Click to collapse
None.
Lennyz1988 said:
How long does it take to restore?
Click to expand...
Click to collapse
Seven minutes
Lennyz1988 said:
What is the size of the backup?
Click to expand...
Click to collapse
972Mb
The last thing I can think of is flashing an old stock rom and then rooting it with CF-Root. Then you have an older version of CWM.
A stock rom like KE2. Then try to restore.
If that does not work find a rom which has the latest CMW. Version 5 I believe. Then try restoring it.
Lennyz1988 said:
The last thing I can think of is flashing an old stock rom and then rooting it with CF-Root. Then you have an older version of CWM.
A stock rom like KE2. Then try to restore.
Click to expand...
Click to collapse
Hmm, are you talking about kernel?
If I'm correctly reading my rough notes from my rooting and tinkering, then my original kernel was KF3, I rooted in mid-October with an insecure equivalent (KF3) (CF-Root method), but quickly upgraded through Kies... I now have kernel XWKI4 (baseband XXKI1, build KI4).
So I moved from 2.3.3 to 2.3.4.
BUT - the backup and restore I did with CWM under the current system as recently as two weeks ago in November worked fine.
Lennyz1988 said:
If that does not work find a rom which has the latest CMW. Version 5 I believe. Then try restoring it.
Click to expand...
Click to collapse
So, you're saying there - you think a newer version of CWM might have eliminated a bug or something?
Might I find any FURTHER problems by changing the ROM and trying to restore?
Thanks for your help.
ClockworkMod - merry effing Christmas.
I really don't know. But I think it's worth the effort determining of your CWM is still functioning properly.
You can also try just flashing the KI4 CF-root kernel, then boot in recovery and then try to restore.
Make sure you have important stuff backuped of course
If you can boot to working phone backup data and copy clockwork mod folder to PC .
Then try posted below . boots to working phone root it with CWM and root copy clockwork folder back then try restore nandroid backup .#
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
JJElgan, thanks,
So let me clarify what you're essentially suggesting...
Store my ClockworkMod safely on the PC
Wipe cache, data, system and SD card in Recovery Mode
"Install correct firmware"
Then put the backup file back and try restoring
What do you mean by "correct firmware"?...
I currently have Baseband XXKI1, Kernel XWKI4, Build XWKI4. That is the firmware with which I made the backup. (I guess that's KI4?)
But the firmware I originally rooted with CWM was PDA: KF3, PHONE: KE7, CSC: KD1 (XEU). (I guess that was KF3?)
What's the aim of this here and what's the source of the info?
Thanks very much.
JJEgan said:
If you can boot to working phone backup data and copy clockwork mod folder to PC .
Then try posted below . boots to working phone root it with CWM and root copy clockwork folder back then try restore nandroid backup .#
Clean Slate for those that balls up the firmware .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware .
jje
Click to expand...
Click to collapse
You dont need to wipe before restoring. Just a quick note
Sent from my GT-I9100 using xda premium
CdTDroiD said:
You dont need to wipe before restoring. Just a quick note
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ever?
How about after?
And how about in the advice the previous correspondent gave, to reinstall kernel/firmware?
as i was searching the android dev section, i saw a 2.2 rom that caught my eye. its the Blue 2.2 Frankenstein-Fishmanmod Final. however im running Bionix 1.3.1 on a Bali kernel, can i just flash it over my rom? or i have to odin back to stock rom, then flash the new frankie-fishmanmod rom? i want to stay with 2.2's is i have given up on gb roms already.
You can just flash it. Odin to stock is cleaner
Sent from my Dell Streak 7 using xda premium
thanks man! however, i still want to retain my files and applications. what can i do aside from going back to stock? and still cleaning up the phone. is there any other way? TIA.
Use Titanium Backup to back up your files.
i already did the back-up. can i proceed to flashing?
mrlee10 said:
i already did the back-up. can i proceed to flashing?
Click to expand...
Click to collapse
yup! after you have backed up all your apps and what not. in CWM i suggest you make a backup there too just in case you have a bad flash or just to have as a back up.
after that just flash like you normally would and then reinstall titanium backup and restore your apps! have fun!
thanks a lot sir. downloading.... ^_^
what would be the things that i have to wipe? still the same as any other rom?
1. factory reset
2. wipe data/cache
3. flash the file
4. cache partition
5. wipe dalvic
mrlee10 said:
what would be the things that i have to wipe? still the same as any other rom?
1. factory reset
2. wipe data/cache
3. flash the file
4. cache partition
5. wipe dalvic
Click to expand...
Click to collapse
also try to backup your text messages with any app from market if you still need your sms
You can back up your texts and APNs in Titanium too.
Hi,
I've recently rooted my phone and installed my first ROM - Resurrection Remix - and it's notified my of an update (v3.1.3) and downloaded the zip for me. My question is how do I safely update RR?
When I first installed it I had to perform a number of steps wiping and clearing things before installing from a zip using CWM. Hopefully I don't have to do all of these as I don't want to have to completely reinstall every update, but do I have to do any of them still or do I just install from the zip in CWM without any other steps?
abc.mikey said:
Hi,
I've recently rooted my phone and installed my first ROM - Resurrection Remix - and it's notified my of an update (v3.1.3) and downloaded the zip for me. My question is how do I safely update RR?
When I first installed it I had to perform a number of steps wiping and clearing things before installing from a zip using CWM. Hopefully I don't have to do all of these as I don't want to have to completely reinstall every update, but do I have to do any of them still or do I just install from the zip in CWM without any other steps?
Click to expand...
Click to collapse
Have you read the first posts of the ROM thread?
Maybe there is a description of how to install the update.
If not, then you can just flash the update zip file in CWM recovery and try to reboot normally.
If everything works fine ... that's it.
If you have issues, boot into recovery, wipe cache and Dalvik cache and reboot normally again.
If that does not help, then you might have to wipe data (do a factory reset) in recovery.
But I think that these steps are not needed as you are already on this custom ROM.
(Usually you only have to do the complete wipe steps when coming from another / stock ROM - and the other way round.)
Good luck !
P.S.: Always create a nandroid backup before flashing. So you are able to "go back" if needed.
tetakpatak said:
Please quote my post and copy&paste whole text into some help thread for your phone, it is better idea as we are now getting off topic here. I'll try to help you there.
Format /system is done in recovery mode under "mount and storage" then after that you can restore your nandroid if it is done with the same recovery you use now. If you're on PhilZ 6, it usually can restore also CWM 6 backups.
Click to expand...
Click to collapse
What does format system do? And please help me load sentinel rom. That's the one I was gonna do.
Okay now for the question... I was running stock 4.1.2 with siyah kernel 6.0 b5. Then I decided to install philz kernel, but ended up in bootloop. Then I tried flashing dorimanx but still in bootloop. All the while I wiped everything before flashing.
Now im stuck as I can boot into recovery via any kernel but ultimately phone is stuck.
What to do?
And can anyone give me steps to install sentinel rom from this stage?
Sent from my Nexus 4 using xda app-developers app
AndroidReborn said:
What does format system do? And please help me load sentinel rom. That's the one I was gonna do.
Okay now for the question... I was running stock 4.1.2 with siyah kernel 6.0 b5. Then I decided to install philz kernel, but ended up in bootloop. Then I tried flashing dorimanx but still in bootloop. All the while I wiped everything before flashing.
Now im stuck as I can boot into recovery via any kernel but ultimately phone is stuck.
What to do?
And can anyone give me steps to install sentinel rom from this stage?
Click to expand...
Click to collapse
Mate, sorry for waiting, I was out of home. We will get your ROM back as soon as the phone boots again.
Don't worry, it doesn't sound serious so far. We have recovery and download mode (so topic name "nothing works" isn't really correct)
Formatting /system wipes all data from the system partition (so your system will be gone then) and it is important to do before installing new ROMs (essencially important for KitKat). It can't do any harm. As you have tried to install other kernels and didn't work we should check first what did you try to flash so far and it didn't boot? Is that what you wrote all what you have tried?
Now let me know please which recovery do you have now and is it the same version like when you have created your nandroid backup? If the recovery is the same, I would indeed try to restore nandroid backup right after wiping /system. Before you wipe the system just let me know: can you use ADB? If yes, check do you have ADB connection in the recovery mode?
tetakpatak said:
Mate, sorry for waiting, I was out of home. We will get your ROM back as soon as the phone boots again.
Don't worry, it doesn't sound serious so far. We have recovery and download mode (so topic name "nothing works" isn't really correct)
Formatting /system wipes all data from the system partition (so your system will be gone then) and it is important to do before installing new ROMs (essencially important for KitKat). It can't do any harm. As you have tried to install other kernels and didn't work we should check first what did you try to flash so far and it didn't boot? Is that what you wrote all what you have tried?
Now let me know please which recovery do you have now and is it the same version like when you have created your nandroid backup? If the recovery is the same, I would indeed try to restore nandroid backup right after wiping /system. Before you wipe the system just let me know: can you use ADB? If yes, check do you have ADB connection in the recovery mode?
Click to expand...
Click to collapse
Will it wipe the internal memory? Or the rom in the phone?
I have cwm based recovery v. 6.0.1.2. Yes I used it to make the backup.
Checking for adb.. How do I do it? .
Sent from my Nexus 4 using xda app-developers app
AndroidReborn said:
Will it wipe the internal memory? Or the rom in the phone?
I have cwm based recovery v. 6.0.1.2. Yes I used it to make the backup.
Checking for adb.. How do I do it?
Click to expand...
Click to collapse
Hi! Internal memory usually shouldn't get wiped by formatting /system, as it is "storage", not part of the system. I would give a try, wipe all: data/factory reset, cache, dalvik cache (advanced) and format /system (mounts and storage). Then back to the main menu --> backup & restore --> restore from (internal or external memory where your nandroid is saved) and choose your backup. It should reboot normally then.
tetakpatak said:
Hi! Internal memory usually shouldn't get wiped by formatting /system, as it is "storage", not part of the system. I would give a try, wipe all: data/factory reset, cache, dalvik cache (advanced) and format /system (mounts and storage). Then back to the main menu --> backup & restore --> restore from (internal or external memory where your nandroid is saved) and choose your backup. It should reboot normally then.
Click to expand...
Click to collapse
Thanks for helping, but I ended up downloading the stock rom and flashing it. Everything was normal. Then I installed cm10.2 so everything's great now. Thanks!
Sent from my Nexus 4 using xda app-developers app
Cool, @AndroidReborn! Now you can install your old ROM again and restore nandroid. Keep that stock FW saved on your PC, so if your phone gets ever again soft-bricked, no problem to revive it again.
I am wondering how nobody here responsed your help prompt, we have in i9000 help threads always handfull people of experience and skills who are ready to help in need. And there are double amount of the SGS2 units sold around the world.... strange.
tetakpatak said:
Cool, @AndroidReborn! Now you can install your old ROM again and restore nandroid. Keep that stock FW saved on your PC, so if your phone gets ever again soft-bricked, no problem to revive it again.
I am wondering how nobody here responsed your help prompt, we have in i9000 help threads always handfull people of experience and skills who are ready to help in need. And there are double amount of the SGS2 units sold around the world.... strange.
Click to expand...
Click to collapse
No idea. The people seem pretty 'busy'. Thanks for helping. Just one teeny tiny last question.. How do I install cm11 or any kitkat rom over this? Cwm is 6.0.4.5 so it's compatible...
Sent from my Nexus 4 using xda app-developers app
If you want to flash kitkat, the first thing you need to do is flash a kitkat compatible CWM (v6.0.4.7). If you try to flash KK with an 'older' CWM, you'll get 'installation aborted....error status 7' or something similar........
I'm currently running @infected_s KK build, and in the OP, you will find download links for the correct CWM, ROM and GApps files.......
Sent from my Infected KitKat bar.....
keithross39 said:
If you want to flash kitkat, the first thing you need to do is flash a kitkat compatible CWM (v6.0.4.7). If you try to flash KK with an 'older' CWM, you'll get 'installation aborted....error status 7' or something similar........
I'm currently running @infected_s KK build, and in the OP, you will find download links for the correct CWM, ROM and GApps files.......
Sent from my Infected KitKat bar.....
Click to expand...
Click to collapse
6.0.4.5 is compatible? I think so ......
Sent from my Nexus 4 using xda app-developers app
I've always read....not.....
In any case, probably best not to risk it......
6.0.4.7 is DEFINITELY KK compatible.... and it'd take a couple of seconds to flash.........
Sent from my Infected KitKat bar.....
AndroidReborn said:
No idea. The people seem pretty 'busy'. Thanks for helping. Just one teeny tiny last question.. How do I install cm11 or any kitkat rom over this? Cwm is 6.0.4.5 so it's compatible...
Click to expand...
Click to collapse
Yes, mate, CWM 6.0.4.5 is capable of flashing KitKat.
It is usually always the same:
download your ROM zip and compatible Gapps
check in the phone (or PC) if the zips are corrupted through download (if they open after clicking them, they are fine)
move the zips to the folder you will flash it from (if you use PC to flash zips with ADB sideload, put them in the sdk/platform-tools folder)
make nandroid backup of your presently used ROM
wipe data/factory reset
wipe cache
wipe dalvik cache (advanced)
format /system (under mount and storage)
flash ROM.zip
flash Gapps
reboot
It is in general always good to read in the development thread of the ROM you attend to flash in the opening post which Gapps are recommended, or if there is some unusual order of flashing (sometimes, developers recommend reboot system after flashing ROM, and after that going to recovery and flash Gapps zip.
Some KitKat ROMs struggle with root access by using Superuser, so SuperSU should be flashed. If SuperSU app from Play Store gives errors by updating binary, you should uninstall SuperSU app then, find in the Chainfire's thread the compatible UPDATE-SuperSu.zip (version for your phone), flash its zip in the recovery, install SuperSU app, update binary (either "normal" or "through CWM/TWRP")