I have a quick question. I'm in Joelz 2.3.3 at the moment but I've been wanting to try a 2.3.4 rom. So i've been wondering, when flashing to one. What all do I have to update and how? I believe change the name to PGsomethin and let it update through hboot? Then do I delete it or keep it on the card? And when flashing back to an 2.3.3 Rom will everything be okay?
Sent from my PG86100 using XDA App
Rom's come in a zip format. Boot into recovery (use the 4 in 1 or an app such as quick boot) once in recovery wipe cache and davlik cache at a minimum. You may need to do a full wipe of data, cache and davlik. Or you can use a tool like superwipe which reformats boot, system, cache, and data partitions. Usually a wipe of cache and davlik works as long as the ROMS have a similar base. Once that is done select flash zip from sd card, then select the zip of the rom you want. Then flash that sucker. when it is done it will tell you, then go back a couple menus and reboot. Presto you're done. The first boot after a davlik and cache wipe may take a while so be patient.
Once you are done you can delete the zip from the sd card.
If you are going from 2.3.3 to 2.3.4 you may want to flash the radios from 2.3.4. the ROM thread should have this info if required or recommended.
Going back to 2.3.3 is just as easy just put the 2.3.3 ROM on the card and flash that in the same manner.
Word of advice is to always make a nandroid backup, its under backup then usually choosing the boot, data, and system partitions will suffice. This way if you do something that totally borks the phone you can volume down and power to get to recovery then restore the nandroid and you are right back where you started no harm no foul.
Good luck. Also if you check the wiki's most of this info is in there if you need more detailed instructions.
Thanks
Sent from my PG86100 using XDA App
Related
I have installed numerous ROMS from Z, T and J and am curious as to whether or not when I flash a new rom there will be residual apk's and crap left behind.
Is there anyway to completely wipe my phone of all roms but keep Xrecovery on so I can flash a new ROM Zip onto the phone. Is the reset phone to factory defaults the same as a complete wipe?
You could format all your partitions in xRecovery and then reflash with a PC and FlashTool.
I have the same problem. Want to wipe everything and instal a new rom. How to? What flastool we need?
Sent from my X10i using XDA App
http://forum.xda-developers.com/showthread.php?t=825675
try this.
Its safe to format System with xrecovery? we can flash with flashtool or seus after wipe system??
just do a full flash using Bin4ary's flasher from the post 2 up. This will effectivly format the phone at start from scratch.
You will need to re-root, reinstall xRecovery (if required), etc. it is a fresh phone, no customisations at all.
Thanks for the Quick Replies gents, I wiped all partitions via xRecovery, dalvik cache, battery stats, and did the factory reset option all at once in the same xrecovery session then without reboot then loaded the FreeX10 2.2 rom and rebooted. Not sure if that got the job done. I've flashed new roms so often that I figure there are still some residual files left behind. An app that completely wipes the phone then loads a ROM would be great. I have a suspicion that Xrecovery does that itself but I'd like to be sure.
"just do a full flash using Bin4ary's flasher from the post 2 up. This will effectivly format the phone at start from scratch.
You will need to re-root, reinstall xRecovery (if required), etc. it is a fresh phone, no customisations at all." -mrtim123
Didn't read that before posting but that sounds like it would solve my problem. I've just been trying to keep up with all the mods for this phone since switching from a BB Bold 9000 and I think it may have a toll on the phone. I'll give that a shot, thnx.
Hello guys,
My question is what the usefull solution for backup and restore the rom? CWM backup / restore seems not really working well. Xda and custom rom's dev always remind to make a backup, but when u face a problem after flashing rom, you cannot access CWM if you got bootloop, then how to restore? And if you dont like the custom rom that you just flashed for some reason, you might want to restore back to your 'fav' rom.. but unfortunately it's not work as you thought. Sometimes restore failed. Im looking the solution for this..
-restore / backup anywhere without using pc.
-not reflash the rom, this will need to customize it again.. Hassle.
-any android app or android system ability to handle this. If CWM can handle this, then tell me how to restore when u got bootloop and cannot access the recovery mod.
-if there's any other app or method, please suggest them to me.
Any help or idea will be appreciated. Thanks.
Sent from my GT-I9100 using xda premium
When ever Ive made a backup Ive always booted to recovery,"backup and restore" and then "backup".That gives me a full Nandroid backup.As far as the bootloop goes Ive never had a problem to boot to recovery with the 3 button combo.If the 3 button combo works,and its never failed for me then select "backup and restore","restore".Ive also read that reflashing your kernel can solve the problem.I know a simple factory reset can,but not always.
nandroid backup is the best
You can always restore the rom when you can access the recovery mod. If you are a flasholic, you cant escape from bootloop and no recovery mod. My odin binary counter now up to 539.. Nandroid backup sometimes got problem.. Let say i made a backup a checkrom, the i flashed miui, suddenly miui got problem, and i get into recoverymod to restore back my checkrom.. When u done restoring, you will be in checkrom but this time its got many problems. Flashing compatible kernel will not solve the problem. The only solution fot me is to reflash it again.
Im not looking for this way, reflash the rom is hassle, sometimes u got bootloop and cant access recovery, then u need to get back home to use computer with odin to flash only kernel.
What else backup method other than nandroid backup.
Sent from my GT-I9100 using xda premium
cooza said:
When ever Ive made a backup Ive always booted to recovery,"backup and restore" and then "backup".That gives me a full Nandroid backup.As far as the bootloop goes Ive never had a problem to boot to recovery with the 3 button combo.If the 3 button combo works,and its never failed for me then select "backup and restore","restore".Ive also read that reflashing your kernel can solve the problem.I know a simple factory reset can,but not always.
Click to expand...
Click to collapse
How if 3button combo no longer work as it always? When theres no recovery mod for you, what will you do then?
Sent from my GT-I9100 using xda premium
neobirdrio said:
How if 3button combo no longer work as it always? When theres no recovery mod for you, what will you do then?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Normally when I flash a ROM over top of another and I know,from other threads,that they are not compatable in terms of insalation and basic use(FCs)then I always do a full wipe (format system/data/cache,battery stats and fact. reset) prior to instalation.With Titanium it only takes a few minutes to reinstall my apps and during instalation there is no conflicting data between the old and new ROM which would cause a major failer to occur.Thats why if something happens the 3 button combo always works cos nothing major has happened.A factory reset and Im done,althought very rare and the nandroid backup is still in the SD if needed.The problem is when there is to many ROMs cluttering the devices system.Ive read that flashing over top of CM7,Lightning and Miui can sometimes be problamatic.
cooza said:
Normally when I flash a ROM over top of another and I know,from other threads,that they are not compatable in terms of insalation and basic use(FCs)then I always do a full wipe (format system/data/cache,battery stats and fact. reset) prior to instalation.With Titanium it only takes a few minutes to reinstall my apps and during instalation there is no conflicting data between the old and new ROM which would cause a major failer to occur.Thats why if something happens the 3 button combo always works cos nothing major has happened.A factory reset and Im done,althought very rare and the nandroid backup is still in the SD if needed.The problem is when there is to many ROMs cluttering the devices system.Ive read that flashing over top of CM7,Lightning and Miui can sometimes be problamatic.
Click to expand...
Click to collapse
Ahaaa! Your description attract me, i think you're right, base on the way you explained about full wipe does make sense to me. The real interpretation of 'full wipe' is including formatting the system?
Maybe I'm doing it wrong here, flashing another rom on top of another. What usually i did is 'full wipe'... This is my step :
1 - clear data/factory reset
2 - clear cache
3 - advance > clear dalvik cache
4 - flash new rom
This is what i did, i didn't format anything as you mentioned above. Is your full wipe method lead to 'fresh install'? Well buddy, could you please note down your full wipe method step by step including format the system? Which step should i do 1st and what step next? Could you?
Thanks, highly appreciated.
Sent from my GT-I9100 using xda premium
Cool.The thing is not all ROMs are compatablie and therefore can cause problems between each other.Your phone holds data from the previous ROM and also your battery collects info and data from each ROM.All this data and info if not cleaned up (and if from various non-compatablie ROMs) will most likely always result in problems.A full wipe,that I will write below is like installing your ROM on a completely clean devive.First of all a nandroid and titanium backup which i explained ealier,I think?
1.Pass the new ROM to internal-SD
2.boot to recovery and wipe cache partition,dalvik cache,battery stats(go back)
3.select "mounts and storage"
4.format cache,system and data (go back)
5.now wipe data/factory reset and your phone is now completely clean
6.now just install your ROM from the internal-SD as normal and I also do another factory reset to avoid possible bootloops and reboot device but if you get one pull the battery or use the 3 button combo to do one.
this full wipe will clean up all system data but will not touch your SD card so your titanium and nandroid backups will not be touched if you should choose to use them.Once I reinstall all my apps again with titanium its a good idea to reboot to recovery and wipe cache partition and dalvik cache then reboot phone.This will help avoid market connetion problems.
cooza said:
Cool.The thing is not all ROMs are compatablie and therefore can cause problems between each other.Your phone holds data from the previous ROM and also your battery collects info and data from each ROM.All this data and info if not cleaned up (and if from various non-compatablie ROMs) will most likely always result in problems.A full wipe,that I will write below is like installing your ROM on a completely clean devive.First of all a nandroid and titanium backup which i explained ealier,I think?
1.Pass the new ROM to internal-SD
2.boot to recovery and wipe cache partition,dalvik cache,battery stats(go back)
3.select "mounts and storage"
4.format cache,system and data (go back)
5.now wipe data/factory reset and your phone is now completely clean
6.now just install your ROM from the internal-SD as normal and I also do another factory reset to avoid possible bootloops and reboot device but if you get one pull the battery or use the 3 button combo to do one.
this full wipe will clean up all system data but will not touch your SD card so your titanium and nandroid backups will not be touched if you should choose to use them.Once I reinstall all my apps again with titanium its a good idea to reboot to recovery and wipe cache partition and dalvik cache then reboot phone.This will help avoid market connetion problems.
Click to expand...
Click to collapse
Omg! I thought you not gonna reply me anymore. Dude, i even copy and paste the whole texts in my note app as my reference on the future. I highly appreciated for your efforts into this. Thanks for those details.
Check your PM.
Sent from my GT-I9100 using xda premium
Wasnt going to leave out in the cold mate,was just a bit busy.Thanks for the PM.Glad I could help
as i was searching the android dev section, i saw a 2.2 rom that caught my eye. its the Blue 2.2 Frankenstein-Fishmanmod Final. however im running Bionix 1.3.1 on a Bali kernel, can i just flash it over my rom? or i have to odin back to stock rom, then flash the new frankie-fishmanmod rom? i want to stay with 2.2's is i have given up on gb roms already.
You can just flash it. Odin to stock is cleaner
Sent from my Dell Streak 7 using xda premium
thanks man! however, i still want to retain my files and applications. what can i do aside from going back to stock? and still cleaning up the phone. is there any other way? TIA.
Use Titanium Backup to back up your files.
i already did the back-up. can i proceed to flashing?
mrlee10 said:
i already did the back-up. can i proceed to flashing?
Click to expand...
Click to collapse
yup! after you have backed up all your apps and what not. in CWM i suggest you make a backup there too just in case you have a bad flash or just to have as a back up.
after that just flash like you normally would and then reinstall titanium backup and restore your apps! have fun!
thanks a lot sir. downloading.... ^_^
what would be the things that i have to wipe? still the same as any other rom?
1. factory reset
2. wipe data/cache
3. flash the file
4. cache partition
5. wipe dalvic
mrlee10 said:
what would be the things that i have to wipe? still the same as any other rom?
1. factory reset
2. wipe data/cache
3. flash the file
4. cache partition
5. wipe dalvic
Click to expand...
Click to collapse
also try to backup your text messages with any app from market if you still need your sms
You can back up your texts and APNs in Titanium too.
I have a P7500 with Overcome v2.3.1 installed, and I want to install the Stock ICS rom from this topic.
What is the better way to install it? Can I just flash it over my current rom with recovery? Or do I have to flash it with Odin? If possible, post a link with the better procedure.
Thanks!
Just flash it in recovery.
Make sure to wipe completely. Such as cache, dalvick, factory reset.
The typical procedures when installing a new ROM.
Installation Instructions
Download ROM and put on SD Card (Obvious but it must be said)
Boot into CWM Recovery and perform a FULL WIPE!!! (Wipe data factory reset, wipe cache, and then wipe dalvik cache!!!)
IMPORTANT!!! YOU MUST PERFORM THE WIPE PROCESS BEFORE FLASHING THIS ROM!!!
Flash ROM
Reboot!!! Done!!!
Credits to Task650
I'm not responsible for anything that happens if you choose to listen to me, including if you tab comes to life, grows fifty feet, and takes over your neighborhood.
Sent from my GT-P7510 using XDA Premium HD app
Yeah I realize this is probably a noob question, but I'm proud (kinda anyway) to admit I am one.
Before jumping head first into flashing a different ROM (currently rooted w/ CWM & ViperXL) I want to make sure I don't end up with a paperweight or at least hours of unexpected work. My reason is just because I want to check out what other Roms have to offer. So its more than possible I may end up back on Viper at some point. Having read some semi-related threads it sounds like this is as simple backing up (nandroid, apps, system data) then flashing from recovery followed with a restore of apps and sys data.
Is there anything I'm missing? Do you need to do a cache and Dalvik wipe? Do I need to load a new boot.img, kernel or anything else? Am I thinking too much and making it seem harder than it really is?
Sent from my HTC EVARE_UL using xda app-developers app
It's pretty simple, just back everything up, wipe system, data, and the cache + dalvik-cache. Then install the ROM, and flash the kernel. Then, you can restore data if you want.
Sent from my One X+ using xda premium
Just to be clear in CWM its the following wipes ONLY!
Main screen
- wipe data/factory reset
- wipe cache partition
Advanced menu >
- wipe dalvik cache
remember (and please someone correct me if I'm wrong) flash the kernel first then jump to recovery.
Oh and ALWAYS have a rom.zip on your phone even if you dont require it, that way you could always reflash your way out of trouble should you forget to put that new rom on to try