Hi Xda forum, I just bought asus transformer prime. I was able to output Hdmi(Honeycomb) to my plasma tv in the afternoon, however after I've upgraded to ICS, my plasma tv could no longer even detect the hdmi output with my prime tablet. I replaced the cable with a new one and still nothing happens.
If I plug in nothing happens, no reaction from my tv and tablet.Please help.What should I do ?
I'm obligated to ask you to double check the input on your TV.
TF201 | XDA Premium
Yes, I did check the input on my tv. I was able to output my prime onto my tv in the afternoon (still running HC).
My experience was just the opposite. I have a Sony Bravia TV and the hdmi output was only playing through the left channel with Honeycomb, but after ICS it is partially fixed as now it plays stereo. I would like to see it be able to pass thru surround sound too (did you hear that ASUS?)
I had a similar experience except it only involves audio. HDMI out to my tv (then back into the amp) was absolutely fine under HC. Updating to ICS stopped the audio from working, although I can still see video. Not a huge issue for me as I can get audio over the headphone socket, but it is still annoying.
The cable I initially used was bought some time ago, but it works when I connect the Prime to a Sony HMZ. I'm wondering if the audio output format has changed and my tv or amp isn't recognizing it.
Can anyone confirm whether there are HDMI settings that can help myself and the OP. I *DID* see some settings once, but can't seem to find them again.
jimbob1971 said:
I had a similar experience except it only involves audio. HDMI out to my tv (then back into the amp) was absolutely fine under HC. Updating to ICS stopped the audio from working, although I can still see video. Not a huge issue for me as I can get audio over the headphone socket, but it is still annoying.
The cable I initially used was bought some time ago, but it works when I connect the Prime to a Sony HMZ. I'm wondering if the audio output format has changed and my tv or amp isn't recognizing it.
Can anyone confirm whether there are HDMI settings that can help myself and the OP. I *DID* see some settings once, but can't seem to find them again.
Click to expand...
Click to collapse
I have video with no audio as well. Didn't try on HC, only ICS.
Sent from my Galaxy Nexus using Tapatalk
Man, I was kinda looking forward to using this function. For the most part my Prime seems to be flawless. Any recommendations for a decent cable so I can give it a try and report back.
Not sure if you guys noticed but there has been an Asus rep here on our forums trying to help trouble shoot. Gary Key is his user name, maybe he could be made aware of the problem. He seems to have been extremely helpful thus far.
Sent from my Transformer Prime TF201 using Tapatalk
Mcoupe said:
Man, I was kinda looking forward to using this function. For the most part my Prime seems to be flawless. Any recommendations for a decent cable so I can give it a try and report back.
Not sure if you guys noticed but there has been an Asus rep here on our forums trying to help trouble shoot. Gary Key is his user name, maybe he could be made aware of the problem. He seems to have been extremely helpful thus far.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
Maybe he can... but I don't know how they're going to address the rounded edge issue. That being, the micro HDMI feel very loose plugged in and it seems the physical port degrades also. It means that you can't use the tablet to play Rip Tide or whatever because the cord will fall out or port gets bent. And yes, I have a serial number Mr. Key.
The issue for me right now is the fact that my pioneer plasma pdp 435hdg tv can't detect the hdmi when connected to my prime. I tried it before I updated to ICS and it worked!...Very strange. Tried changing the cable and all no problem whatsoever.
My cable actually fits in very snuggly, not loose or anything.
venkadesh3 said:
The issue for me right now is the fact that my pioneer plasma pdp 435hdg tv can't detect the hdmi when connected to my prime. I tried it before I updated to ICS and it worked!...Very strange. Tried changing the cable and all but still didn't work with ICS.
My cable actually fits in very snuggly, not loose or anything.
Click to expand...
Click to collapse
What can I do ? I've emailed to asus support team but no reply yet.
Problems
HDMI out worked flawlessly for me with HC but after the ICS update my TV also cannot detect input, tried all 3 HDMI ports just comes up with no input.....
Notes: I used one TV under HC and a different one under ICS, could change outcome
ICS also gave me the diagonal flicker, occasional reboot, and sometimes auto-orientation will stop working.
Ahh you're facing the same issue as me. May I know what Brand is your tv,bro?
TVs
The one that worked on honeycomb was a Coby....fairly cheap one
THe other on that I tried to use but failed with ICS was LG
Mine's a Pioneer plasma.It was very shocking for me because it worked an hour ago in HC and after updating to ICS it can't even detect hdmi. Certain that it isn't a HW problem just a SW prob with ICS and certain Tv's. But no answer so far from Asus/ Google worries me.
I'm pretty sure I remember reading in a Mobile tech Review article that the Prime ICS has issues outputing 5.1 audio, and that only certain channels, 2 of 5 speakers and the bass came through. So I'm guessing it's a known issue that Asus needs to fix in an update.
Updates?
Anyone else having problems??? Any information regarding this problem from Asus yet?
going into the notifications and clicking on hdmi notification made it show up on my tv
I got a replacement order on mine, my wifi is sheet, and the HDMI doesn't work. I've tested the wire with 3 TV's(Vizio,Samsung,LG) got nothing. Had my buddy test his prime with the wire and kaboom it worked.
Id get it replaced.
firmware fix
I will test this weekend if it works with the new firmware that was released on the 18th...if anyone else who had problems can test before hand please do so
Tried with the new update but still doesn't show up on my tv.
Related
Gents I bought a generic POWERED MHL cable and when I plug it into the S2 WiFi won't connect anymore to my network. What gives? I have googled a bit and seen a few issues regarding it, not sure if more have had the issue. I wonder if this is a software or hardware issue. I have 4 days to return this phone if it is a hardware issue.
Anyone else have the same issue? TV signal shows up fine.
In general section someone has this same problem. I believe they said it was a tethering issue so you might have to root
yup i saw that and posted. i called samsung. according to them when plugging in an MHL adapter it disables wifi (even though you may still see the wifi icon) so that it doesnt cause jerkiness of ur picture
Hmm... I'll need to retry. I know cell data worked fine. Will try wifi-only.
Did you get it figured out? I ordered up one last week and should have it tomorrow. I was looking forward to being able to stream netflix.
What I would like to know before I spend the money on the official Samsung one if it would do the same thing.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Wifi works fine with my MHL adapter connected. There is a small overscan issue but nothing I can't work with (my screen is 1:1 ratio so it's the adapter or the phone output). Both the laptop and the phone reported the same external ip.
Using this MHL adapter - http://www.newegg.com/Product/Product.aspx?Item=9SIA07R0608256
P.S. - I just checked (10/29 - 5pm EST) and it did 1080i output. Not 1080p like some suggest but it may not do that until an actual 1080p video is played. Mine was 1280x960 resolution. There were two other interesting observations made that I thought were good when the MHL adapter was connected.
(Inline edits below)
(Clarification: Below observations are during video playback using the Video app only!)
1) During video playback TV does output 1:1 resolution (no overscan issue)
2) TV doesn't mirror phone display. Just renders playback so you can use the phone like a remote.
3) Screen doesn't turn off automatically during TV out playback.
Now then the above are for the video app and just to put minds at ease here are for everywhere else.
1) Screen may overscan but it may be resolution or screen ration differences between phone and tv. Mine is 1920x1080 native.
2) The TV will mirror the phone display so you can play your games and what not on the TV (like in the youtube videos showing off the adapters)
(End Inline Edits)
Now then samsung's claim about studdering during MHL TV out? That sounds like bs. I checked cpu usage during the mkv decoding work and it was at 25% at the highest point and that was done by the mediaserver process. The tvoutserver used less than 2% cpu time to do it's work. I connected via adb over wireless which would of been only possible if wifi was working.
shinji257 said:
Wifi works fine with my MHL adapter connected. There is a small overscan issue but nothing I can't work with (my screen is 1:1 ratio so it's the adapter or the phone output). Both the laptop and the phone reported the same external ip.
Using this MHL adapter - http://www.newegg.com/Product/Product.aspx?Item=9SIA07R0608256
Click to expand...
Click to collapse
I think that is the same one I ordered. As soon as I get it I will report back how it works for me.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
shinji257 said:
Wifi works fine with my MHL adapter connected. There is a small overscan issue but nothing I can't work with (my screen is 1:1 ratio so it's the adapter or the phone output). Both the laptop and the phone reported the same external ip.
Using this MHL adapter - http://www.newegg.com/Product/Product.aspx?Item=9SIA07R0608256
P.S. - I just checked (10/29 - 5pm EST) and it did 1080i output. Not 1080p like some suggest but it may not do that until an actual 1080p video is played. Mine was 1280x960 resolution. There were two other interesting observations made that I thought were good when the MHL adapter was connected.
1) During video playback TV does output 1:1 resolution (no overscan issue)
2) TV doesn't mirror phone display. Just renders playback so you can use the phone like a remote.
3) Screen doesn't turn off automatically during TV out playback.
Now then samsung's claim about studdering during MHL TV out? That sounds like bs. I checked cpu usage during the mkv decoding work and it was at 25% at the highest point and that was done by the mediaserver process. The tvoutserver used less than 2% cpu time to do it's work. I connected via adb over wireless which would of been only possible if wifi was working.
Click to expand...
Click to collapse
You can't mirror the phone's display? What if I wanted to play a game on my TV - not possible? Does the hdmi out only display video playback?
I just got mine today. It mirrors the display on the phone. It works really well. Picture is way better than the RCA hookup i had for my cappy. WiFi works too. I am watching breaking bad on netflix. Works awesome.
Here is the one I got:
http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=8675&seq=1&format=2
akira02rex said:
You can't mirror the phone's display? What if I wanted to play a game on my TV - not possible? Does the hdmi out only display video playback?
Click to expand...
Click to collapse
I was specifically referring to the video app that's included on the phone (the samsung one). It mirrored the display everywhere else including in games so everything that showed on the phone showed on the TV.
owmygulay said:
I just got mine today. It mirrors the display on the phone. It works really well. Picture is way better than the RCA hookup i had for my cappy. WiFi works too. I am watching breaking bad on netflix. Works awesome.
Click to expand...
Click to collapse
owmygulay, Can you control your phone with TV remote control (menu navigations, media transport functions, etc.)?
Thanks
kide1 said:
owmygulay, Can you control your phone with TV remote control (menu navigations, media transport functions, etc.)?
Thanks
Click to expand...
Click to collapse
Nope. None of that. Unless I an doing something wrong. It is just a larger display.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
owmygulay said:
Nope. None of that. Unless I an doing something wrong. It is just a larger display.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Click to expand...
Click to collapse
I had the same experience with other unbranded MHL adapter. The Samsung MHL adapter provides all remote control functions.
kide1 said:
The Samsung MHL adapter provides all remote control functions.
Click to expand...
Click to collapse
I didn't know that. Thats pretty sweet. You can plug the phone in, set it down and control everything with the tv remote? How does that work if you have to touch the screen to select stuff. That would be worth the extra cash for the samsung one over the cheap ones.
owmygulay said:
I didn't know that. Thats pretty sweet. You can plug the phone in, set it down and control everything with the tv remote? How does that work if you have to touch the screen to select stuff. That would be worth the extra cash for the samsung one over the cheap ones.
Click to expand...
Click to collapse
You can use navigation keys from the TV remote to navigate through the phone home pages and program list and select apps with the "Select" button on the remote, but it is impossible to select apps from the dock. It's not as fast as the touch screen , but it is manageable. My Sony TV is two years old, but works well with the Samsung MHL adapter. I borrowed one from my coworker to try, now I'm looking for a good online deal.
owmygulay said:
I just got mine today. It mirrors the display on the phone. It works really well. Picture is way better than the RCA hookup i had for my cappy. WiFi works too. I am watching breaking bad on netflix. Works awesome.
Here is the one I got:
http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=8675&seq=1&format=2
Click to expand...
Click to collapse
I'm the poster in the General forum with this issue. I have the monoprice adapter, and it disables my wifi.
That was stock, so I rooted the phone to disable any tethering app, and wifi is still disabled....did you have to do anything to get this to work?
This is really strange....maybe I should return the monoprice one and get the newegg one.
ferrocene said:
I'm the poster in the General forum with this issue. I have the monoprice adapter, and it disables my wifi.
That was stock, so I rooted the phone to disable any tethering app, and wifi is still disabled....did you have to do anything to get this to work?
This is really strange....maybe I should return the monoprice one and get the newegg one.
Click to expand...
Click to collapse
I didn't do anything special. Just plugged it in. They had a couple different ones on monoprice. Did you get the same one I linked? It is the only one that says it will work with the sgs2. Mine works great and the picture quality is pretty good. I would try and just exchange it.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
owmygulay said:
I didn't do anything special. Just plugged it in. They had a couple different ones on monoprice. Did you get the same one I linked? It is the only one that says it will work with the sgs2. Mine works great and the picture quality is pretty good. I would try and just exchange it.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Click to expand...
Click to collapse
Yeah, same one, item # 8675. Will try an exchange.
What ROM are you running? I tried both bare stock and Serendipity.
ferrocene said:
Yeah, same one, item # 8675. Will try an exchange.
What ROM are you running? I tried both bare stock and Serendipity.
Click to expand...
Click to collapse
I am running unnamed. I think I used it when I was stock though. I can't remember.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
I'm chasing an issue with HDMI sync across several different displays and i wanted to see if anyone else can replicate what i'm seeing.
I have attached my prime to 5 different displays with my Monoprice 10ft HDMI cable. This cable works flawlessly on several other devices, so i'm taking that out of the equation right now.
The issue i'm having is that on 3 of the 5 displays i have used, the prime will not maintain HDMI sync, the image and audio jump back and forth between the display and the prime accompanied by lines and green artifacting. This does not seem related to the media, as i can reproduce this with Bluray rips (mkv) as well as 1080p video recorded from the prime.
I'm using the stock video player as well as BS Player in HW decode mode.
I'm leaning towards an audio decoding/sync issue between the prime and the display. Connected to a problematic display, i can play an Mkv with the stock player with no issue, but of course there is no sound. If i play it with BS Player, i get sound, but an extremely unstable link and ultimately a failure of the HDMI connection.
Playing a prime-sourced 1080p vid with stock player and BS player on a problematic display yields the same results...i get audio, but stuttering and ultimately a failure of the HDMI link (tablet shows disconnected) occurs.
Displays (all used with the same cable.)
55inch Panasonic 1080p LCD - Works flawlessly, i can't get it to put a foot wrong.
42inch 720p Panasonic Plasma - artifacts on homescreen, all other screens, and unstable HDMI link.
37inch 1080p Vizio LCD - No issues, same as 55" panasonic
27inch Hanns-G 1080p LCD (~1 year old) - Clear home screens, but HDMI instability while playing back any 1080p content
28inch Hanns-G 1080p LCD (brand new, different model) - exact same behavior as the other hannsG monitor.
If anyone has experienced this, or NOT experienced this, please chime in with the details of your setup. I can't imagine this is an isolated incident.
I don't have my TP (yet), so I can't give you a yes I see it/no I don't, but from a general troubleshooting perspective have you given thought to it being a bad connector on the prime itself?
With the testing you've done so far it seems pretty likely that the issue is with the prime, but personally I think that sounds a lot like an intermittent physical disconnect problem more than a software one.
Edit: you can test for this, too, wiggle the connector in its slot and see if that causes the issues and conversely if holding the connector firmly in place stops it.
I didn't get my HDMI cable yet, but I've had problems with the stock video player on the tablet. Download MXPlayer and give it a shot. It's fixed all of my issues. I believe there's a free version available.
Sent from my Transformer Prime TF201 using Tapatalk
beavertank said:
I don't have my TP (yet), so I can't give you a yes I see it/no I don't, but from a general troubleshooting perspective have you given thought to it being a bad connector on the prime itself?
With the testing you've done so far it seems pretty likely that the issue is with the prime, but personally I think that sounds a lot like an intermittent physical disconnect problem more than a software one.
Edit: you can test for this, too, wiggle the connector in its slot and see if that causes the issues and conversely if holding the connector firmly in place stops it.
Click to expand...
Click to collapse
Thanks for the response. That is something i forgot to include in the OP...i can't find any correlation to the connector either. I wanted to believe the issue was as simple as that, but after lots of wiggling and hours of playing riptide with the cable in, i've mostly ruled that out as well.
Thanks for the suggestion on MX video player, i will give that a shot.
i found a solution here for the no sound issue - that worked for me
http://www.transformerforums.com/forum/transformer-prime-help/13216-hdmi-no-sound.html#post114045
you have to fiddle with the volume controls on the side above the HDMI connector and eventually it worked for me
no factory or hard reset needed
it may not work for every one - so don't flame me if it does not
I am on the latest version of ICS released yesterday
I'll have to try tonight and see if this works for me. Will report back later.
Sent from my GalaxyNexus using Tapatalk
I just plugged my prime into my Samsung HDMI port and got sound. Guess I don't have that issue.
Might have to do with HDMI version or HDCP...
mine seems to work for every tv in the house aside from the one in my bedroom, but i can't really figure out why. :\
I got my mhl addapter but it is not working correctly. I hook the addapter to the hdmi cable then hook the power using the cable and power supply that came with the phone and finally connect to the phone. I do hear a beep and see the phone charging so i know the power connection is good. Most of the time i dont get anything at all in the monitor, sometimes all i get is a flashing of the screen as if a signal is coming and going and in a handful of instances it had work but it would play video very chopy at both the hdtv and the phone screen, like a frame every 3 seconds. I try my larger hdtv and exibit the same behavior execpt that i never got it to work. I realize the addapter migth be defective but in the other hand i might be doing something wrong. The videos i tried both works fine in the phone by itself. One is off youtube and one is a movie saved in the sd card.
Thanks!
Fernandq said:
I got my mhl addapter but it is not working correctly. I hook the addapter to the hdmi cable then hook the power using the cable and power supply that came with the phone and finally connect to the phone. I do hear a beep and see the phone charging so i know the power connection is good. Most of the time i dont get anything at all in the monitor, sometimes all i get is a flashing of the screen as if a signal is coming and going and in a handful of instances it had work but it would play video very chopy at both the hdtv and the phone screen, like a frame every 3 seconds. I try my larger hdtv and exibit the same behavior execpt that i never got it to work. I realize the addapter migth be defective but in the other hand i might be doing something wrong. The videos i tried both works fine in the phone by itself. One is off youtube and one is a movie saved in the sd card.
Thanks!
Click to expand...
Click to collapse
I have trouble getting mine to connect to my monitor. It takes me many tries but when I finally get it to work I don't have choppy video like you are talking about...everything runs smooth.
You have debugging off, correct? Other than that it may be your adapter as mine has yet to give me a problem on any TV
The debugging set to on was causijg the lag in the video. Thanks. After i got that out of the way i played with it more and realized the reason i dont get video has to do with the usb cable. I can play with it and if i put pressure in an upward direction it works. So i know i do have a defective addapter. I will try other usb cables but this is a good working cable and brand new. Another issue worth to mention is how horrible the video quality is. It looks like real redish, no sharp at all. It reminds me the old time when we only had over the air tv signal and you were getting a signal from a distant station. Is this normal? I wasnt expecting 1080 full hd signal but if this is the way it is supposed to work then maybe i dont need this addapter after all. Anyone care to coment on their video quality?
I tried at work on my pc monitor with a hdmi to dvi adapter. I had no problem getting the adapter to work continuously but video got choppy again even without debuging on... I will do some more testing later...
hate to bump this but if anyone using mhl can chime in and let me know how good/bad is their video quality on a 32 inch (or higher) hd tv I will appreciate it much. If what I saw in mine is the way it is supposed to look then I might as well save my money and watch whatever I am watching in the phone itself....
Thanks!
I'm having the same issues, too. Would like to know if anybody knows how to resolve this.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Fernandq said:
hate to bump this but if anyone using mhl can chime in and let me know how good/bad is their video quality on a 32 inch (or higher) hd tv I will appreciate it much. If what I saw in mine is the way it is supposed to look then I might as well save my money and watch whatever I am watching in the phone itself....
Thanks!
Click to expand...
Click to collapse
I hook mine up to my 55in LCD every once in a while and the videos play at almost the exact quality as what's on the note's screen. The only difference I've noticed is the picture on my TV isn't as bright as on the note when playing videos.
Mine is good from time to time on a 42" screen, but the sound cuts out sometimes, and occasionally static goes across the screen.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
So I should see good quality... Tonight I tried my work monitor. I hooked a hdmi to dvi adapter to the monitor, hook the hdmi cable to it, then hook the cable to the mhl adapter, hook the power, then hook to the phone... It worked great, the audio was coming out of the phone which I was expecting to have to bluetooth to my pc to use it for audio as you loose your audio feed when going hdmi to dvi. Videos were looking great, no lag in audio, no skipping or anything. I played youtube videos off dolphin, stock browser and the youtube application with no problem. Played different videos just to make sure it was not the content. Then played some of the movies on my sd card. All great. The only issues I would have is at times I lost all video for several seconds (total back screen) and sometimes when I loose video I would get snow. I rearranged my monitor set up since I use dual monitors at work and wanted to have use the dvi connection on the secondary monitor instead of the first. Then I tried one more time to make sure it was all the same before heading and trying at home... It started failing the same way as at my home. Video will play a frame every 2 or 3 seconds, no audio and sometimes not video at all...
I am going to change this adapter, any of you that is having success care to share who did you bought yours from?
Thanks!
OK, no vodeo for me, checking why not.
Applications, settings, location and security, scrool down to find "Disable USB debugging Mode", make sure it is selected.
Fernandq said:
Applications, settings, location and security, scrool down to find "Disable USB debugging Mode", make sure it is selected.
Click to expand...
Click to collapse
Figured it out prolly while u were typing. LOL
Got video and good sound, works with AnyNET+
Im happy for you. Where did you got yours from? I am expecting anoter adapter tomorrow from a different company and it is also supposed to work with anynet+. The seller that sold me this one just returned my money and told me I did not have to return it so I still have it. Pending if the other adapter does the same or not...
Got the new one today, it does work on both of the hdtvs at home with no problems. Anynet does not seems to work on the 20 some inches tv but It does work for my camcorder. At work it didnt work right until I turn off/on the phone, then it stopped working when I tried again after the phone went idle and I switched the monitor to the pc while I was working a trouble. Now it wont work at work even after a reboot. I get that one frame per every2 seconds problem. I am going from a hdmi cable to a dvi connector but it did worked fine before..
Hello,
I'll be hooking up my tab in the car and I'm looking for a cable that will charge over USB and provide audio out in one.
I found this guy on Amazon but it only says it works with the original Tab.
www.amazon.com/gp/product/B0054MV84Q/ref=ox_sc_act_title_1?ie=UTF8&smid=A36WKB83D3HR47
The video out is mirrored so I would just leave that part unplugged.
Does anyone have experience with this or something similar with the Tab 2?
Thanks!
I just ordered one. I'll give it a whirl and report back!
Be interesting to see how you get on, I'm in the process of mounting my P5110 in the car as well. I don't think the video would work anyway, but the audio should...
What bracket are you planning on using if you don't mind me asking?
I actually ended up making my own, a TV mount coupled with a gel case.
TV mount: http://www.amazon.com/gp/product/B0044YMQIW/ref=oh_details_o05_s00_i00
Gel case: http://www.amazon.com/gp/product/B009L7OMVG/ref=oh_details_o02_s00_i00
With a little modification, it worked out quite well.
I like this setup because I can easily reach the tablet to control Pandora, Stitcher, Maps, etc, and still swing it over for a passenger to watch Netflix or browse the web. If I can get this cord to work, I'll be set!
More pictures here:
http://imgur.com/a/az78q
Has anyone had success with this on 10.1?
Sent from my ADR6425LVW using xda premium
Got the cable in the mail today. I hooked it up and everything works as expected.
I can't speak for the video plug, but the audio works perfectly and the usb charges as expected. I couldn't be happier!
elypsar said:
Got the cable in the mail today. I hooked it up and everything works as expected.
I can't speak for the video plug, but the audio works perfectly and the usb charges as expected. I couldn't be happier!
Click to expand...
Click to collapse
Very nice setup, and with the minimum of cables hanging out of the Tab.
I must order the same cable now that you confirmed that it works, and post a pic once I have it mounted in my car.
Currently my trusty i9000 handles all my in car android needs with Navigon etc.. time to upgrade.
I still need a way to attach the cable to the mount without it looking like junk, but since it splits close to the usb/av end of the cable, this shouldn't be too hard.
Definitely post some pics once you have yours set up.
Since this is mainly going to stay in the car, I also set up Tasker to perform a few tasks when the device gets power.
On power connect:
- Turn screen on (I believe this happens anyway though)
- Set brightness to auto
- Set screen timeout to 24hrs (There is also a function to keep the screen from turning off, but it still dims the screen close to the devices set timeout, which I find annoying)
- Play audio (if paused)
On power disconnect:
- Pause audio
- Set screen timeout to 2min
- Lock screen
Just some food for thought.
Looks great!
Sent from my SCH-I915 using xda premium
So we can get audio out thru the 30-pin connector? hows the sound quality vs. the headphone jack? i assume since it works for the 10.1 tab 2 it should work on the 7.0, would love for a nice single connection setup like that when I work out a way to do an in-dash setup once i figure out a way to relocate the AC controls.
edit: 500th post :highfive:
has anyone got this working on a galaxy tab 2 7.0 (p3110 pref)
ive bought 2 diffrent cables and neither has routed audio out via dock,
is there something i should be doing within android to enable dock mode or route audio out via the connector or will it do that automatically?
i really need audio to come out via the dock connector so i can charge and play audio out of the one cable.
daniel644 said:
So we can get audio out thru the 30-pin connector? hows the sound quality vs. the headphone jack? i assume since it works for the 10.1 tab 2 it should work on the 7.0, would love for a nice single connection setup like that when I work out a way to do an in-dash setup once i figure out a way to relocate the AC controls.
edit: 500th post :highfive:
Click to expand...
Click to collapse
The audio on the 30 pin is the same audio on the headphone jack....... its audio.
The only difference between the 10 and the 7 is that the 7 has no video on the 30 pin
I bought a similar cable as yours But I cant get it to work the audio wont out through the cable only on the device. Any setting that I should do? Could you please show me your set up? Thanks you.
elypsar said:
Got the cable in the mail today. I hooked it up and everything works as expected.
I can't speak for the video plug, but the audio works perfectly and the usb charges as expected. I couldn't be happier!
Click to expand...
Click to collapse
Do you happen to know someone with the tab 2 7.0 that you can test that cable with? I'm thinking about ordering one but would like confirmation that it works. Not interested in video, just audio and charging.
the_buzz_man
Sent from my GT-P3113 using xda premium
the_buzz_man said:
Do you happen to know someone with the tab 2 7.0 that you can test that cable with? I'm thinking about ordering one but would like confirmation that it works. Not interested in video, just audio and charging.
the_buzz_man
Sent from my GT-P3113 using xda premium
Click to expand...
Click to collapse
If it works on the p-51xx it will work the same on the P31xx except no video on 31xx 2.7.0 tabs
the pinouts are exactly the same.
So, will this cable bring video out from p5100?
Did anybody tried it on p5100?
Thanks
Sent from my GT-P5100 using xda app-developers app
ibrahimnie said:
So, will this cable bring video out from p5100?
Did anybody tried it on p5100?
Thanks
Sent from my GT-P5100 using xda app-developers app
Click to expand...
Click to collapse
CHeck the Samsung accessories page for the adapter, if it says its compatible it is, if its doesn't list your model its not.
Just curious here...I've been long considering taking my Galaxy Tab 2 7 inch apart and somehow fashioning a Double Din head unit out of it. But I'm a little skeptical now because:
If I'm reading this right, you guys are saying that only audio comes out of the USB connector thing? But that doesn't make sense to me because why wouldn't the audio sound, and video sound be handled the same way? It just seems like to me they would be essentially the same thing, but then again I'm not very tech on the software side so idk
mswilson2007 said:
Just curious here...I've been long considering taking my Galaxy Tab 2 7 inch apart and somehow fashioning a Double Din head unit out of it. But I'm a little skeptical now because:
If I'm reading this right, you guys are saying that only audio comes out of the USB connector thing? But that doesn't make sense to me because why wouldn't the audio sound, and video sound be handled the same way? It just seems like to me they would be essentially the same thing, but then again I'm not very tech on the software side so idk
Click to expand...
Click to collapse
From what I gather, your audio in whatever form will be carried through the 30-pin connection on the GTab7.0. The only difference in the pin connector from the GTab10.1 and GTab7.0 is that Samsung, in their infinite wisdom, omitted the video pin on the GTab7.0.