Mine unfortunately creeks and I think that it has to do with the back battery door.
I would like to find a new one so I don't have to put paper behind it to keep it from creeking.
If you have one from a Refurb or anything like that please PM me as I would be very grateful to purchase this.
Pretty sure I've seen them on Verizon's web site. Not terribly expensive.
...Sent from my Tab
andybones said:
Mine unfortunately creeks and I think that it has to do with the back battery door.
I would like to find a new one so I don't have to put paper behind it to keep it from creeking.
If you have one from a Refurb or anything like that please PM me as I would be very grateful to purchase this.
Click to expand...
Click to collapse
$14.99 on verizon site
Click Here
Thanks dudes, exactly what I was looking for!
$16 shipped is a great deal.
the only ones I could find were on ebay lol and are selling for 60$!
http://www.ebay.com/itm/ORIGINAL-OE...639?pt=LH_DefaultDomain_0&hash=item2318264d0f
http://www.ebay.com/itm/ORIGINAL-OE...387?pt=LH_DefaultDomain_0&hash=item519ca13083
---and it seems like by reputable ebay sellers??
hopefully this will fix the need for some paper behind the battery to stop the door from creeking.
will update when the new back door arrives!
Eventually these things will be everywhere like the inc2 as the back battery doors actually come with refurb replacements from Verizon. I myself had 3 extras for my inc2 lol.
Just got my new backdoor in this morning.
100% fixed the creeking noise on my phone!!
very happy about that, I have however kept a few small pieces of paper behind the door as there was a little gap frop the back door to the battery that i could feel, perhaps this was on purpose for cooling of battery? idk, not sure but my battery hasn't gotten any hotter than normal.
I've swapped out 2 battery doors and I still have the creaking. I'm fairly certain the only phones that don't creak are the iphone and droid razr/razr maxx.
my first rezound creaked like crazy, then i had a replacement sent out and it was fine. pretty weird issue to have lol.
Just add some papers the size of the battery behind the door, works wonders.
The back cover/door for the extended battery is a piece of crap, and creaks like a rusty hinge all the time. So annoying. I finally got it to almost entirely stop by taking some sticky notes and cutting two thin strips on the adhesive part, and sticking them on the sides of the inside of the back cover, then sticking a little bit of paper on top of the battery. For mine, at least, most of the sound was coming from where you grip it on the sides and this solved it.
@HTC: It's annoying that we have to do this, please take more care with the design of it on future super-phones. Save the cheap back covers for mid-range/low-end phones, in my opinion. Lol.
Og droid had a metal back cover and didn't creak. I had a bionic, and it creaked
Roland Deschain said:
The back cover/door for the extended battery is a piece of crap, and creaks like a rusty hinge all the time. So annoying. I finally got it to almost entirely stop by taking some sticky notes and cutting two thin strips on the adhesive part, and sticking them on the sides of the inside of the back cover, then sticking a little bit of paper on top of the battery. For mine, at least, most of the sound was coming from where you grip it on the sides and this solved it.
@HTC: It's annoying that we have to do this, please take more care with the design of it on future super-phones. Save the cheap back covers for mid-range/low-end phones, in my opinion. Lol.
Click to expand...
Click to collapse
Mine doesn't creak at all.
Are you guys using some sort of death grip or something? Don't use the extended battery often but neither it or the regular door creaks.
Via Rezound using XDA Premium
No creaking here either.
Standard door does not creek at all. The extended one does a tiny bit on the right side, if I death grip it like someone above said lol. Not annoying enough to try and fix it.
Sent from my ADR6425LVW using xda premium
Both mine creek. The extended one creeks the worse that's for sure. It doesn't matter how you hold it. Not the biggest deal though since I don't use it too often. I don't seem to get that much more life out of it to justify the size compared to the standard battery.
KORM via the beast known as the Rezound.
I have an awful creak on the left side. I am going to try a bit of gaffers tape.
My extended battery door doesn't creak but is missing the Beats logo. I noticed they didn't forget the HTC logo..
Tape didn't fix it.
Any ideas?
I have two to sell I'll sell both for 25 with shipping.
Sent from my GT-P7510 using XDA Premium HD app
Related
As the title implies, my back battery door used to creek so badly. Put some paper behind it and feels 10x better.
Just wondering if anyone has had to do the same?
I bounce back and forth between extended and oem battery. My oem door doesn't squeak badly, rarely every really. My extended door doesn't at all.
My back door creaked but it was because I had a missing tab near the volume bar. Got a replacement from VZW and the creak is gone.
mine creaks horribly...you just put paper behind it? my left side creeks reallllllllly bad and it's getting worse.
wow very cool. i just put a thick piece of paper back there, and i don't really noitce it anymore..hmm!
haaha funny thing now, my phone doesn't lay 100% flat...it's a thin piece of paper, yet now i can sit here and spin my phone because there's a tiny added bulge to it!
Nice, I just snipped a piece and put it back there to see if it would altogether eliminate it. Good call!
Battery's get hot as they charge and discharge, this heat shortness there lifespan. I wonder if something other than paper would dissipate heat better?
Just a thought
Nope. Mine is solid. Aslo I keep a tpu case on it at all times.
Sent from my HTC Rezound!
yeah, i was wondering if paper on the battery was such a good idea because of the heat, etc as well. hmm
jayochs said:
yeah, i was wondering if paper on the battery was such a good idea because of the heat, etc as well. hmm
Click to expand...
Click to collapse
Yeah, my first thought was that sounds dangerous
Mine doesn't really creak much.
The paper isn't going to spontaneously combust. It isn't nearly hot enough. Not to mention if you had to put more than 1 piece back there you should probably just get a new back door. If anything was going to make the phone stay hot, or get hot longer it would be a TPU case, or any case for that matter.
nope. gonna spontaneously combust.
Sent from my ADR6425LVW using XDA App
I use paper on my fascinate with the extended battery. Been using it for over a year with no probs whatsoever. I needed it to stop the batt from shifting side to side. Problem solved
Sent from my SCH-I500 using xda premium
jayochs said:
nope. gonna spontaneously combust.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
lol
10charr
I have two extended battery backs, both creak some but one is worse than the other.
I don't get what the big deal is however, the creak doesn't bother me at all. I hardly notice it & figure its no big deal anyway.
~John
jmorton10 said:
I have two extended battery backs, both creak some but one is worse than the other.
I don't get what the big deal is however, the creak doesn't bother me at all. I hardly notice it & figure its no big deal anyway.
~John
Click to expand...
Click to collapse
agreed, but I also use that verizon holster case with it.
nrfitchett4 said:
agreed, but I also use that verizon holster case with it.
Click to expand...
Click to collapse
yea, I use the hard rubber HTCPedia case with the back cutout for the extended batt (I have a shiny black one & a red one).
I LOVE that case, it makes the phone feel like the extended battery is the stock setup.
~John
jmorton10 said:
I have two extended battery backs, both creak some but one is worse than the other.
I don't get what the big deal is however, the creak doesn't bother me at all. I hardly notice it & figure its no big deal anyway.
~John
Click to expand...
Click to collapse
It's nothing I wad losing sleep over lol, just something that bothered me, and adding paper resolved it just fine, very happy with the results.
creak bothered the living hell out of me because it creaked even with the TPU case on; felt like i was holding a cheap piece of plastic. now it doesn't and i couldn't be happier.
The back plate makes creaky sounds all of the time is this normal or can it be fixed
Sent from my ADR6425LVW using xda premium
Slap some electrical tape under it in different spots until it doesn't creak any more.
fenguepay said:
The back plate makes creaky sounds all of the time is this normal or can it be fixed
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
cut some paper the size of the battery, and stick them between the battery and the case. Add/take away sheets of paper till the case still closes but the creak is gone. We did this on the droid bionic, did wonders for the terrible creak of the phone. I haven't had to much creak with the rezound, but been meaning to do this with the phone.
yeah, I notice that as well with my unit. It is a little annoying. I have to say while the phone is nice, the build quaility really needs a little better.
You'll get used to it. No big deal.
The TPA case that goes only around the edges (sold on htcpedia.com) helps reduce this. It fits the regular back and OEM extended battery back. Best case I've ever had on a phone.
Sent from my ADR6425LVW using Tapatalk 2
Deron Baker said:
You'll get used to it. No big deal.
The TPA case that goes only around the edges (sold on htcpedia.com) helps reduce this. It fits the regular back and OEM extended battery back. Best case I've ever had on a phone.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Can you post or PM me a link to the "TPA edge-only" case? I couldn't find it on that site. Thanks!
nosympathy said:
cut some paper the size of the battery, and stick them between the battery and the case. Add/take away sheets of paper till the case still closes but the creak is gone. We did this on the droid bionic, did wonders for the terrible creak of the phone. I haven't had to much creak with the rezound, but been meaning to do this with the phone.
Click to expand...
Click to collapse
This! Just got a couple Post Its...folded them up and placed them on the back of the battery. Profit.
ogarlen said:
Can you post or PM me a link to the "TPA edge-only" case? I couldn't find it on that site. Thanks!
Click to expand...
Click to collapse
I use this one with my extended batteries, works super:
http://shop.htcpedia.com/htc-rezound-extended-battery-tpu-case-hard-rubber.html
Deron Baker said:
You'll get used to it. No big deal.
The TPA case that goes only around the edges (sold on htcpedia.com) helps reduce this. It fits the regular back and OEM extended battery back. Best case I've ever had on a phone.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I bought the extended battery and back and that TPA case that goes around the edges but leaves the back exposed does a great job of squeezing the back and phone together and eliminating the squeeks. I like the regular size battery but with the TPU case, I use the extended battery all the time.
solution is too buy a 3rd party case.
My original Rezound didnt creak, but my replacement one does a bit. I notice it most when I'm cleaning the screen, cause that seems to put the most pressure on it. Sticking a bandaid on the battery seems to have helped it a lot though..
i put a thin piece there to stop the creaks, which it did..it's funny though, now my rezound easily spins in circles on a table hahah..that THIN piece of paper was enough to bulge the middle of teh back cover out to make it spinny!
Don't forget that paper is an insulator. That's why homeless people use newspaper as a blanket. Your phone will retain more heat, longer with paper shoved inside it.
yeah, we voiced those concerns back wehn this topic came out like the week the phone came out haha..was always a problem..but most of us never really noticed any higher temps than normal..my phone never goes over like 42 degrees C, which is what, around 100 degrees F?
I'm pretty nit picky about my phone creaking and I've had a lot of time on my hands so recently I've given this topic way to much thought.....
The creaking is due to the plastic not fitting perfectly and the friction created when the battery door slightly moves around.
I sat down with a bottle cap, a q-tip, and a can of WD-40 (I know, I know, call me crazy if you must )
I filled up the bottle cap with WD-40 and dipped the q-tip in it. I carefully LIGHTLY applied it on all the connecting tabs on the battery door. Voila! Be careful to avoid all the antenna metal stuff so you don't mess up your reception.
Sent from my ADR6425LVW using XDA
Umm, so on the left spine of my phone about halfway up my phone if i push in, the plastic frame flexes, and every time I pick it up, im like WTF is this?
Is this on every rezound?
Its not a huge flex.. but its noticeable that some part is not fitting tight... and this phone is 5 days old, never been dropped..
The only thing i can think is to put a case on it, and it will tighten up that flex....
Anyone else..
feel around the exterior of your phone and see if you get any creaks.
Relax the Kung Fu Grip, and you'll be happier with it (and it will be happier, too).
:good:
I think it's just the way the phone is. I actually got VZW to send me a free replacement cover because of all the insane creaking and it fixed it for like a month now the replacement cover is creaking like mad too. I also bought a 2nd used rezound that came with an extended battery so I now have 3 original back covers and 1 extended. All of them creak like crazy on both rezounds.
But... I always have the phone in a case so I can't actually squeeze it hard enough for it to creak so I've let it slide. This may explain why the back isn't removable on the One series heh.
Thanks for confirming that its not just my phone...
Im gonna slap the verizon high gloss silicone case on it and call it a day.. That should sturdy it up.
I know it made a difference on my DINC.
Thanks!
Gorilla* said:
Thanks for confirming that its not just my phone...
Im gonna slap the verizon high gloss silicone case on it and call it a day.. That should sturdy it up.
I know it made a difference on my DINC.
Thanks!
Click to expand...
Click to collapse
No buy a cruzerlite case
Sent from my ADR6425LVW using Tapatalk 2
Cruzerlite? Link..
I have always been partial to verizons versions..
I know a TPU is a TPU,, but in my experience, my DINC case stayed solid and tight for the year I had it..
I dont mind paying 15.00 for quality.
I just looked up Cruzerlite... they have 2 patterns... I dont want a pattern on my case...
Gorilla* said:
Cruzerlite? Link..
I have always been partial to verizons versions..
I know a TPU is a TPU,, but in my experience, my DINC case stayed solid and tight for the year I had it..
I dont mind paying 15.00 for quality.
Click to expand...
Click to collapse
cruzerlite.com
I have four cases all really nice plus they have ones with androids on the back the only problem is volume buttons are hard to press but you can cut it out with a razor
Sent from my ADR6425LVW using Tapatalk 2
LOL, no im ok with not modding my case for 5.00
Thanks tho
I just received my replacement case from Otterbox today. May I say "WOW", much improved over the launch case. The new case seems to have shaved the slightest bit of plastic from the sides to make it a kind of struggle to clip together. I don't know about you guys (or the ladies), but I like a case that holds my phone firmly. That's not all though, I noticed that the foam pieces they adhere to the back plate are a little thicker than the original as well. Now for the shell, this thing is wicked hard to get off the plastic now (may cause the power and headphone port flaps to break a little quicker). It feels a little more "plasticy", but it is a huge improvement over the former almost elastic rubber. Just figured I'd let you guys know, Otterbox is finally getting things right.
Sent from my EVO using xda app-developers app
jthein1989 said:
I just received my replacement case from Otterbox today. May I say "WOW", much improved over the launch case. The new case seems to have shaved the slightest bit of plastic from the sides to make it a kind of struggle to clip together. I don't know about you guys (or the ladies), but I like a case that holds my phone firmly. That's not all though, I noticed that the foam pieces they adhere to the back plate are a little thicker than the original as well. Now for the shell, this thing is wicked hard to get off the plastic now (may cause the power and headphone port flaps to break a little quicker). It feels a little more "plasticy", but it is a huge improvement over the former almost elastic rubber. Just figured I'd let you guys know, Otterbox is finally getting things right.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Is it possible to post up close pics? I'm about to call them for the 20th time and get another silicon shell. Its all stretched out and the flap to the charging port is soon to come off. I have had problems with what I already said as well as the little clip lip breaking off what snaps the phone in. What was your complaint to get a replacement? Did you get a full replacement?
Sent from my EVO using xda premium
I will try to get some pics tomorrow. I've had a pretty busy week. The plastic case broke right at some of the clips, and that didn't bother me until I tried to put it in my holster and the holster snapped, because it didn't fit right with the broken clips (I honestly never thought that would happen). Anyway, when I broke the holster, I inadvertently pushed my phone to the ground and broke the screen (landed just right on the top right corner). They ended up sending me a full replacement, and apologized profusely about my phone. I was honestly going to get a different case, but when I received my replacement, I was more than happy with the improvements in quality.
Sent from my EVO using xda app-developers app
jthein1989 said:
I will try to get some pics tomorrow. I've had a pretty busy week. The plastic case broke right at some of the clips, and that didn't bother me until I tried to put it in my holster and the holster snapped, because it didn't fit right with the broken clips (I honestly never thought that would happen). Anyway, when I broke the holster, I inadvertently pushed my phone to the ground and broke the screen (landed just right on the top right corner). They ended up sending me a full replacement, and apologized profusely about my phone. I was honestly going to get a different case, but when I received my replacement, I was more than happy with the improvements in quality.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Cool. I called them yesterday and they are also sending me a complete replacement. I told them I heard they have a new design and said its quite possible they are always upgrading due to complaints. I won't get the case until 2 weeks so if you could get pics that'd be awesome thanks man I understand your busy as am I with this crazy Christmas mess.
Sent from my EVO using xda premium
i highly doubt they changed anything around. my original plastic part of the case broke one of its clips and they sent me a new complete case and it seemed like the old case, just newer. Id imagine its just a new case to you, and can be worn in just like the old one
Sonin66 said:
i highly doubt they changed anything around. my original plastic part of the case broke one of its clips and they sent me a new complete case and it seemed like the old case, just newer. Id imagine its just a new case to you, and can be worn in just like the old one
Click to expand...
Click to collapse
I see the grinch has showed his face on Christmas!
Sent from my EVO using xda premium
xbmoyx said:
I see the grinch has showed his face on Christmas!
Sent from my EVO using xda premium
Click to expand...
Click to collapse
In the same boat fellas - on my second replacement case after the originals charger port broke off. Judging by the look of the port now, the same thing is going to happen AGAIN.
The replacements we recieved haven't been revised - the rubber intially felt diffferent but over time as it wears and oils from the hands or other substances are transferred it took on the same feel as my older case.
To be sure I followed up with the Otter rep that handled my replacement. This is the response I recieved back from Otterbox:
"Hi Marcus,
Your welcome! At this time the silicone has not changed from the originally one that you had. We are however constantly looking at ways to improve on all of our products and the silicone issue has been brought to our attention from loving customers like you. Hopefully in the future we will have this problem fixed up.
Have an Otterific week,
Brittney
Customer Service Representative
P: (855) 688-7269
F: (970) 493-1755
www.otterbox.com"
Technics0891 said:
In the same boat fellas - on my second replacement case after the originals charger port broke off. Judging by the look of the port now, the same thing is going to happen AGAIN.
The replacements we recieved haven't been revised - the rubber intially felt diffferent but over time as it wears and oils from the hands or other substances are transferred it took on the same feel as my older case.
To be sure I followed up with the Otter rep that handled my replacement. This is the response I recieved back from Otterbox:
"Hi Marcus,
Your welcome! At this time the silicone has not changed from the originally one that you had. We are however constantly looking at ways to improve on all of our products and the silicone issue has been brought to our attention from loving customers like you. Hopefully in the future we will have this problem fixed up.
Have an Otterific week,
Brittney
Customer Service Representative
P: (855) 688-7269
F: (970) 493-1755
www.otterbox.com"
Click to expand...
Click to collapse
Oh well at least they have a warranty & good customer service. I have probably had pushing 10 claims by now with no problem. Imagine if there was no warranty
Sent from my EVO using xda premium
Technics0891 said:
In the same boat fellas - on my second replacement case after the originals charger port broke off. Judging by the look of the port now, the same thing is going to happen AGAIN.
The replacements we recieved haven't been revised - the rubber intially felt diffferent but over time as it wears and oils from the hands or other substances are transferred it took on the same feel as my older case.
To be sure I followed up with the Otter rep that handled my replacement. This is the response I recieved back from Otterbox:
"Hi Marcus,
Your welcome! At this time the silicone has not changed from the originally one that you had. We are however constantly looking at ways to improve on all of our products and the silicone issue has been brought to our attention from loving customers like you. Hopefully in the future we will have this problem fixed up.
Have an Otterific week,
Brittney
Customer Service Representative
P: (855) 688-7269
F: (970) 493-1755
www.otterbox.com"
Click to expand...
Click to collapse
The real question is did you have an otterific week? On a serious note any suggestions on getting the case replaced mine isn't broken but has a lot of dirt stuck to it.
Sent from my EVO using xda app-developers app
jthein1989 said:
I just received my replacement case from Otterbox today. May I say "WOW", much improved over the launch case. The new case seems to have shaved the slightest bit of plastic from the sides to make it a kind of struggle to clip together. I don't know about you guys (or the ladies), but I like a case that holds my phone firmly. That's not all though, I noticed that the foam pieces they adhere to the back plate are a little thicker than the original as well. Now for the shell, this thing is wicked hard to get off the plastic now (may cause the power and headphone port flaps to break a little quicker). It feels a little more "plasticy", but it is a huge improvement over the former almost elastic rubber. Just figured I'd let you guys know, Otterbox is finally getting things right.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
I just got my replacement in the mail and its 100% exactly the same except the silicone isn't all stretched out because its new. Gotta love that new smell
Sent from my EVO using xda premium
Yeah just received my third replacement since launch. One thing I will say is they stand behind their warranty. After the first complaint they sent me 2 silicone replacements, then after both of those suffered from the same problem as the original, they just sent me a whole new case. Hard shell and all. It sucks that they don't work like they are supposed to, but as long as they keep replacing them free of charge I guess I can't complain too much.
klbjr said:
Yeah just received my third replacement since launch. One thing I will say is they stand behind their warranty. After the first complaint they sent me 2 silicone replacements, then after both of those suffered from the same problem as the original, they just sent me a whole new case. Hard shell and all. It sucks that they don't work like they are supposed to, but as long as they keep replacing them free of charge I guess I can't complain too much.
Click to expand...
Click to collapse
I just filled out the warranty for my third replacement as well. The usb flap last a few weeks before it starts to tear and by about two months the rubber is very loose.
Otterbox is GREAT about their warranty!! I've had multiple replacements on multiple devices! They never question you or give you any problems. I bought a used black Commuter on ebay just because I knew I could get a new one directly from Otterbox in exchange for the used one! Saved me some money in exchange for a little wait time. Got a new case for less than half price, actually MUCH less than half of the retail price!!
Sent from my White Evo LTE running MeanBean, using XDA Premium
i'm about to get my 3rd silicone slip cover..... like all of you they begin to warp near the upper right hand corner of the phone. After this happened the first time, I was extremely careful whenever I grabbed the phone from my pocket, or whenever I pressed the volume rocker in an effort to extend the life of the slip cover... and it did last 2 months longer than the original slip cover did.... but still it eventually warped. I realize the 3rd slip cover is going to be no different.... but why not get one more slip cover before my warranty expires?
honestly, I dont care that the charging port flap breaks, frankly it's annoying having that flap so I like it when it finally breaks off.
I'm really tempted to just ditch the otterbox case and take my chances with the bare phone (this phone is one of the better looking phones out there).... but then every couple of weeks I'll drop the phone and remember that's why I bought an otterbox case.
Trident case Kraken. That is my next one after I run out of slip covers. I love popping out the plastic and using Zagg hd shields though.
Sent from my Evo fulla VeNum!
The plastic charging door broke on my phone, and Verizon wants me to ship my device back for this instead of sending me the little piece of plastic, with a possible $200 charge for abuse? The battery life is not great on the device I use it all day so I have to charge it often, I can't stand when MFG's put these little covers on but the phone looks like crap without it.
Anyone else have this and a better way to get the little charging door or a case recommendation so I can't see it? I love the otterbox stuff but both cases are too bulky for the DNA in my opinion.
Most people ripped of that little flap. If you get a new one it will probably come off again, so just keep your phone.
As far as cases, idk. I keep my phone naked.
orangechoochoo said:
Most people ripped of that little flap. If you get a new one it will probably come off again, so just keep your phone.
As far as cases, idk. I keep my phone naked.
Click to expand...
Click to collapse
Agreed, I prefer it naked as well, but this thing looks bad without the door, the phone has such clean lines!
When and if mine comes off or falls apart, I will be making another one that's completely removable, basically like a rubber plug fabricated to fit snugly into the slot when I'm not charging carefully formed to prevent damage or binding.
My rezound didn't have a cover, and I take good care of my devices but in my home and work environment I'm surrounded by dust and dirt. My DNA inside would get lots of stuff like dust and even tiny pieces of hay.
My OCD would get the best of me, and every time I would connect the charger I would think of dust and airborne particles being abrasive to the micro USB port.
It can be annoying to have to use a tool each time I remove the cover but I'm really glad its there. I realize how frustrating it can be though.
Sent from my DNA... S-Off like a baws
Can u just buy a wireless charger? VZ has the Nokia (with discount) for under $40.
You ship your phone and they will send you back a refurbished phone.
the_passenger said:
Can u just buy a wireless charger? VZ has the Nokia (with discount) for under $40.
You ship your phone and they will send you back a refurbished phone.
Click to expand...
Click to collapse
Duh. That is a really good idea, I feel retarded for not thinking about that when it broke!:good: Do you have a link, all the ones I see are $59.99 and up? It's still a go at this price, but if I can get for under $40 even better!
CharliesTheMan said:
When and if mine comes off or falls apart, I will be making another one that's completely removable, basically like a rubber plug fabricated to fit snugly into the slot when I'm not charging carefully formed to prevent damage or binding.
My rezound didn't have a cover, and I take good care of my devices but in my home and work environment I'm surrounded by dust and dirt. My DNA inside would get lots of stuff like dust and even tiny pieces of hay.
My OCD would get the best of me, and every time I would connect the charger I would think of dust and airborne particles being abrasive to the micro USB port.
It can be annoying to have to use a tool each time I remove the cover but I'm really glad its there. I realize how frustrating it can be though.
Sent from my DNA... S-Off like a baws
Click to expand...
Click to collapse
If you make one of those, make me one too!! I'll send ya a few bucks!
My door broke off as well, and I only remove it to charge while on the road away from my wireless charger. I just happened to snap it off while taking the door off, so I still have it, but it has come away from the phone's body.
A monumentally stupid design choice that was clearly done to induce the purchase of wireless chargers.
Fastlivin said:
My door broke off as well, and I only remove it to charge while on the road away from my wireless charger. I just happened to snap it off while taking the door off, so I still have it, but it has come away from the phone's body.
A monumentally stupid design choice that was clearly done to induce the purchase of wireless chargers.
Click to expand...
Click to collapse
I think the funny/sad thing here is the immediate claim from Verizon to me on the phone that it's probably abuse. I asked the support rep if he had seen the plastic hinge before. Abuse, total crap when it breaks in a month... if it had a little stronger battery it probably would have taken me two months for it to wear out!!!
Mine broke off so know I just stick it in. Can't help but wonder if its necessary to meat the IPX-5 water protection?
DROIDESP said:
I think the funny/sad thing here is the immediate claim from Verizon to me on the phone that it's probably abuse. I asked the support rep if he had seen the plastic hinge before. Abuse, total crap when it breaks in a month... if it had a little stronger battery it probably would have taken me two months for it to wear out!!!
Click to expand...
Click to collapse
What an idiot. Lol. Mine came off after a few weeks too and I rarely used the charging port since I have a wireless charger.
Sent from my Limited Edition HTC6435LVW
DROIDESP said:
The plastic charging door broke on my phone, and Verizon wants me to ship my device back for this instead of sending me the little piece of plastic, with a possible $200 charge for abuse? The battery life is not great on the device I use it all day so I have to charge it often, I can't stand when MFG's put these little covers on but the phone looks like crap without it.
Anyone else have this and a better way to get the little charging door or a case recommendation so I can't see it? I love the otterbox stuff but both cases are too bulky for the DNA in my opinion.
Click to expand...
Click to collapse
Same thing happened to me with the plastic cover. I called Verizon told them it fell off while trying to open it to charge the phone they sent me one and said I wouldn't get charged the fee for damage. I received the new one and have not been charged any fee and its been a few months so don't worry about them charging you if you replace it.
Sent from my HTC6435LVW using Tapatalk 2
For people having poor battery performance - make sure you check your usage statistics! For example, there is a bug with Latitude where it will constantly ping for location, so Maps will take up a huge amount of battery life. Check and make sure there aren't any programs or servicing taking up an unusual amount of battery life. For me, battery life has been amazing once I fixed the Maps issue (there is a thread somewhere if anyone has any specific questions on that).
I've had my DNA for less than 24 hours and my battery door came off already haha. It's okay though, doesn't look that bad without it and I work in an office so I don't see any immediate danger to the device. Love it.
DROIDESP said:
The plastic charging door broke on my phone, and Verizon wants me to ship my device back for this instead of sending me the little piece of plastic, with a possible $200 charge for abuse? The battery life is not great on the device I use it all day so I have to charge it often, I can't stand when MFG's put these little covers on but the phone looks like crap without it.
Anyone else have this and a better way to get the little charging door or a case recommendation so I can't see it? I love the otterbox stuff but both cases are too bulky for the DNA in my opinion.
Click to expand...
Click to collapse
Sounds like maybe you should take it back and get an iPhone? Seriously, I have the DNA as well. Any phone that has the rubber door flap is going to break, period. Just leave it off. You can resolve battery life by rooting it, and loading a ROM/Kernel that has better battery support.
Lastly, in re: the way it looks, the case, etc. Sounds like you're just unhappy. Try getting a phone you like better? They provide a 15 day return period for folks just like you.
DROIDESP said:
Duh. That is a really good idea, I feel retarded for not thinking about that when it broke!:good: Do you have a link, all the ones I see are $59.99 and up? It's still a go at this price, but if I can get for under $40 even better!
Click to expand...
Click to collapse
you have to have corp discount to see it for $37.
other wise Microsoft store has it for $49. http://www.microsoftstore.com/store...0-Wireless-Charging-Plate/productID.259027800