Updating from locked o2 stock 2.2 to 407. - Streak 5 Q&A, Help & Troubleshooting

Hi,
I've been reading around but am not satisfied with the answers given regarding this question. I've a 2nd locked Dell Streak begging for a taste of GB but I recall having read all manner of things "back in the day" about requiring a rebelsim to change recoveries etc, but can't find that info now for a definitive answer.
I want to move from o2's stock. Can I just fastboot flash the 407 recovery and update.pkg it, or are there more steps due to the fact it's locked?
Thanks in advance.
Sent from my Dell Streak

Please, don't all jump at once...
Sent from my Dell Streak

as far as im aware you would have to use fastboot , and flash the recovery, then the update.pkg, theres lots of threads and guides on here telling you how to do this, also check the wiki lots of good info there too

I saw those, but there was nothing - for me - specific to o2.
The biggest issue for me is remembering reading a requirement for a rebelsim or goldcard?
Or... am I confusing this with another device? :-/
I have read the wiki a few times while learning about Modding my unlocked phone. The locked one is new to me though.
Sent from my Dell Streak

Bayton said:
I saw those, but there was nothing - for me - specific to o2.
The biggest issue for me is remembering reading a requirement for a rebelsim or goldcard?
Or... am I confusing this with another device? :-/
I have read the wiki a few times while learning about Modding my unlocked phone. The locked one is new to me though.
Sent from my Dell Streak
Click to expand...
Click to collapse
The fact that its locked just means you can only use your o2 SIM. I don't think it has anything to do with your ROM. You just flash the amss and then the dsp1 files, flash recovery and then flash the stock package. From there you can move to custom ROMs for GB. There is still no guarantee the GB ROM will recognize your SIM... simple as that

The radio files should be included in the update package... at least it seemed to flash them when I went from 351 to 407 on my unlocked streak.
Everything else though: spot on, thanks! I will give it a go and hope for the best
Sent from my Dell Streak

UNLOCK
I have a 02 one I am almost sure you have to unlock it first which i did with unlockstreak.com it does cost $29 though but you can test first to see if it can and i paid through pay pal.If you do look in your spam folder for email with code as i didnt see it at first. The site is to down load the software and test is
www$unlockstreak£com/pages/download-dell-streak-unlock-software?ref=874b1d7212afe8cc4672f2f53d9976c12a5ea0e5
and a write up about it at www$streaksmart$com/2011/02/dell-streak-unlocker-software-unlocks-streak-in-minutes.html
as to the flashing i have done gingerstreak 244 and dsp amass streak mod recovery i didnt do a normal recovery upgrade first though so not sure if i did it right still have to look into this but it works

you deffo dont have to unlock it as mines is still o2 and im running gingerbread dsc rom, just make sure you flash the required amss and dsp1 file then recovery and rom you should be set to go

If I recall correctly, all a RebelSIM does is allow SIM cards from any carrier to be used in the device without having the device's unlock code. Thus using a RebelSIM should not affect the ability to flash ROMs. My Aria and my roommate's Inspire are both SIM locked to AT&T, yet both have custom ROMs (Cyanogenmod for the Aria, Android Revolution HD for the Inspire).

SORRY
[email protected] said:
you deffo dont have to unlock it as mines is still o2 and im running gingerbread dsc rom, just make sure you flash the required amss and dsp1 file then recovery and rom you should be set to go
Click to expand...
Click to collapse
My mistake sure i read it had to be unlocked might have confused it with my hd2.
Can you tell me if i should flash a 350 recovery or is strak mod a recovery instead.Only when i went from o2 rom to gingerstreak i did not flash a recovery.only streakmod recovery.I did streak mod then dsp amass then gingerstreak thank you

407 requires either 350 or 407 recoveries
Sent from my Dell Streak

Ok heres what i did, flashed the appropriate dsp1 and amss files for gingerbread, then f-ash streakmod recovery , then via the recovery flashed dsc rom, but some say it might be better if you flash official 2.3 first then custom rom over it, entirely upto you but i flashed dsc gingerbread rom straight over froyo 2.2
Sent from my Dell Streak using xda premium

Thank you all for the input, I will give it a go!
You've been most helpful to me and anyone else to have the same question in the future.
Sent from my Dell Streak

sent u a pm mate

thank you
[email protected] said:
Ok heres what i did, flashed the appropriate dsp1 and amss files for gingerbread, then f-ash streakmod recovery , then via the recovery flashed dsc rom, but some say it might be better if you flash official 2.3 first then custom rom over it, entirely upto you but i flashed dsc gingerbread rom straight over froyo 2.2
Sent from my Dell Streak using xda premium
Click to expand...
Click to collapse
I see I did streakmod first then dsp amas then ginger its working ok just didnt know if i had to do the recovery or if strakmod was a recovery that you can use instead of.Thank you and im not trying to hijack this thread but i get the impression the 02 device is a bit different to do than a dell one.

Bayton, it shouldn't matter that you're on o2 but you can always e-mail o2 and they will send you an unlock code for free - I did it myself. There is a page on the o2 website where you can fill in a unlock code request. If they refuse the code tell them they must have made a mistake and that you know someone who's had theirs unlocked. This happened to me and then they sent the code.
Cheers.

Related

[Q] Want to Instal StreakDroid 1.6.0

i looking to install StreakDroid 1.6.0 for the increase in performance but have a question i can't seem to find an answer to.
my question is that in the post here at XDA it's recommended to update the BASEBAND, do i really have to and if so how do i do that. i haven't been able to found how to. i didn't post in said thread cause all the post are praise, racommendations, and far more complicated questions then mine and didn't want to take focus away from those posts.
any help would be appreciated.
i'm running a U.S. AT&T locked streak it's been rooted
running O2 2.2
Kernel Ver. 2.6.32.9-perf
Build Num. 12792
basband ver. GAUSB1A131921
Not sure if you have to with the version you have but I wouldn't at least suggest use qdl and the official update url to get the latest US release. Then update to 1.6.0. I know for a fact that from official 2.2 build 318 you don't have to update the baseband any further.
Sent from my Dell Streakdroid 1.6.0
I've heard of qdl but have no ideahow to get it or even use it (I tried to find it but couldn't)
Sent from my Dell Streak using XDA App
Google streakdroid and go to the main site. From there go to guides and you will find video guides on how to download and use QDLtool. As for changing the baseband I strongly suggest doing it so that your phone will be unlocked.
explode1991 said:
Google streakdroid and go to the main site. From there go to guides and you will find video guides on how to download and use QDLtool. As for changing the baseband I strongly suggest doing it so that your phone will be unlocked.
Click to expand...
Click to collapse
Changing baseband doesnt mean your phone is unlocked. To unlock the phone you need to input a code.
captaingohan, baseband in mentioned in the official streakdroid 1.6.0 thread. Read the thread, it will help with any problems.
stoney73 said:
Changing baseband doesnt mean your phone is unlocked. To unlock the phone you need to input a code.
captaingohan, baseband in mentioned in the official streakdroid 1.6.0 thread. Read the thread, it will help with any problems.
Click to expand...
Click to collapse
Well I meant he should change it and install the unlocked firmware. But he was going to install DJ_Steve so whatever sorry for the confusion.
don't care about phone being lock or not just wanted to know if i really have to update baseband
read the thread. it has the info you need.
just installed streakdriod 1.6 from O2 2.2 without updating the baseband eveything seems to be working fine. and got my quadrant score from 833 to 1550 now phone runs much smother
I had some trouble doing it but I started by switching to 1.5.3 and then 1.6.1 clockworks mod has to work. Phone is much faster now was 844 on quadrant now 2178 just from the swith from 2.2 to 1.6.1
wow i only got 1550 how did you get 2178
lol didn't see theres a 1.6.1. updateing noe
sweet, just did it. Now on 1.6.1 and running at 1955
Sent from my Dell Streak using XDA App
captaingohan said:
sweet, just did it. Now on 1.6.1 and running at 1955
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Sweet it is nice. No issues so far
started getting "Android.process.acore has stopped unexpectedly ( and then force closing )" some posts suggested doing a factory reset. i did that and now my phone gets stuck on the streakdroid splash screen. tried re-installing 1.6.1 and it stays stuck on the splash screen. i've tried to go back to o2 2.2 and when i try to update either it says to get the update.pkg (witch i have on my card) or it'll just stay blank
and ofcourse as soon as i post this it starts workin. i guess the 8th factory re-set is the charm
I only get those when I run quadrant and sometimes I have to clear data to get it to run. Also if I start pushing buttons when it first wakes it goes slow and I have to wait a few secs to let it catch up. But other than that its all good.
streakdroid 1.6.0 update problem
im having trouble with probably one of the simplest processes for the 1.6.0 update. im very new to modding and used qdl to update to froyo. When trying to update to streakdroid 1.6.0, im kinda lost on what steps to take to flash streakmod. There's a video from unlockr that instructs on loading custom roms. When it talks about flashing recovery it tells you to click on "install recovery.windows.bat". For streakmod there's only a recovery image file (not sure, but i think this means i need to cmd) if so, ive never done this process and would love for someone to post a "cmd for dummies" walkthough.
Im running the qdl official update (31800) version of froyo. Also, for someone who's new to the Modding scene, will i even notice a difference btw 2.2 and streakdroid 1.6? Is it worth the update?
Also. Do i need to update my baseband?
Look for the streakmod recovery forum in the streak development forum. It will have the download and install instructions for the streakmod recovery. Once that is installed then go to the streakdroid forum. Download and follow the install instructions. You do not have to flash your baseband. If you follow those two threads you should be able to get it all installed. Also check out the tutorials at streakdroid.com and streaksmart.com
Sent from my Dell Streakdroid 1.6 0

Repairtool stupid question.

In the repairtool tutorial it says to hold the volume up button ( button closest to the headphone jack). The volume up button on my Streak is the button beside it to the right. Is my phone backwards or something? Am I just not reading it properly?
Its the one closest to the headphone jack. Technically backwards until you flash 2.2. Then it'll be correct.
Sent from my Dell Streak using XDA App
GiRARDsays said:
Its the one closest to the headphone jack. Technically backwards until you flash 2.2. Then it'll be correct.
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Thanks. I'm a real noob at this. Now that I have been able to complete clockwork recovery I think I'm ready to try to do this. Still reading to try and find out which method I have to use now.
I agree wit you
i posted this in another thread, there really isnt any thinking involved when deciding which method to use i believe. qdl is by far the easiest method, heres the info you will need
rptw said:
i found that THIS thread helped me with what i needed to install on my computer to be able to update
then i used the main tutorial HERE to get to a prerelease version of froyo
from there you can use the "next steps" guide in the above link to get you to either an official release of 2.2 or to dj_steves froyo 1.6.1 which u can find in the development thread
happy modding
Click to expand...
Click to collapse
None of the tutorials shows rogers 7921 to anything.i found one post showing that I can go to 309 recovery and then direct to 318 update rom.i have gotten as far as trying to install the update rom from my sd card but the screen just stays blank.i don't know how long I am suppose to leave it to install or what it should look like when it is installing.
rogers 7921 build
Rooted
Clockwork recovery
Adb drivers installed
fastboot recovery complete
318 on sd card
Any advise welcome.
Sent from my Dell Streak using XDA App
Sorry used wrong term. Tried to upgrade to 318. It is also unlocked.
Sent from my Dell Streak using XDA App
rptw said:
i posted this in another thread, there really isnt any thinking involved when deciding which method to use i believe. qdl is by far the easiest method, heres the info you will need
Click to expand...
Click to collapse
Thanks, I gave it another try. I was having issues with the ADB driver to get the QDL to work. My other steps before got the right driver installed and the QDL worked this time. i'm on 2.2 Baseband 00-US Build 10688. Might try Stevies later but right now I just want to check this out.
you should go beyond the qdl version of froyo because that is pre-release version from what i understand. if you want stock froyo, go to http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg and download and install that. thats the rom that unlocked streaks have gotten from dell
rptw said:
you should go beyond the qdl version of froyo because that is pre-release version from what i understand. if you want stock froyo, go to http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg and download and install that. thats the rom that unlocked streaks have gotten from dell
Click to expand...
Click to collapse
Thanks again. I updated to the official rom for now. I had to to get my Slingplayer app back. I'll have to research that if I'm going to go to Steves version.

New Streaker!!!!!

Allo Allo!!
After jumping ship from the Samsung Captivate world... I found myself the proud new owner of a Dell Streak!!
I was happy to find a development forum for the device, and SUPER pumped getting to know my new toy!! Hehehe..
When I got the Streak.. it was used, and already had a Streakdroid 1.9.1 custom ROM installed on it,
Great ROM as far as I can tell, and will likely end up back on the ROM.
But... I am inclined to start from the ground up with the device.
I have been poking around the Streak forums looking for a definitive method to return the device back to its original state.
Any help or direction would be AWESOME!!! I learned my lesson bricking a couple of Cappys, to ask first instead of trusting sometimes conflicting methods posted.
I want to take my Dell Streak 5, running Streakdroid 1.9.1 ... and return it to the factory ROM, newest firmware.
Anybody?
Start reading:
Streak Wiki at xda-developers.com – includes DL links for ROMS and a ROM reference, lots of good info. Start here!
Radimus’s Universal Guide to Flashing a ROM – MUST READ if you want to flash a ROM or upgrade
Dell Streak – The Complete Guide – thread at XDA that includes a somewhat dated PDF with Streak hacking basics. Fastboot section a must read. Read the thread for follow-up!
And check out the links in my signature for more Streak related stuff.
Welcome.
Perfect!!
Thank you very much!!
Seems I have hit my first bump...
marvin02 said:
Start reading:
Streak Wiki at xda-developers.com – includes DL links for ROMS and a ROM reference, lots of good info. Start here!
Radimus’s Universal Guide to Flashing a ROM – MUST READ if you want to flash a ROM or upgrade
Dell Streak – The Complete Guide – thread at XDA that includes a somewhat dated PDF with Streak hacking basics. Fastboot section a must read. Read the thread for follow-up!
And check out the links in my signature for more Streak related stuff.
Welcome.
Click to expand...
Click to collapse
Thanks again for the great links....
I had already discovered the Wiki and pdf... some AWESOME info..
But...
After feeling confident enough to flash... I went ahead with the instructions from http://forum.pocketables.net/showthread.php?t=9694
Reached step #11 - "Software upgrade via Update.pkg on SD Card" ... And find myself staring at a screen on my Streak with the Dell logo with a triangle/exclamation mark.
This does not seem right... lil' help before I touch anything?
B.B.
sikstiks said:
. . .
Reached step #11 - "Software upgrade via Update.pkg on SD Card" ... And find myself staring at a screen on my Streak with the Dell logo with a triangle/exclamation mark.
This does not seem right... lil' help before I touch anything?
B.B.
Click to expand...
Click to collapse
This sounds like you are using a custom recovery to flash a stock rom.
Stock recoveries flash .pkg files, the custom recoveries flash .zip files.
It sounds like you need to flash a stock recovery for the rom you are trying to install.
Read this and this. The first link is to a part of a longer article on modding basics.
Edit: If you are trying to install a .zip at that screen just hit the power button to get past it.
marvin02 said:
This sounds like you are using a custom recovery to flash a stock rom.
Stock recoveries flash .pkg files, the custom recoveries flash .zip files.
It sounds like you need to flash a stock recovery for the rom you are trying to install.
Read this and this. The first link is to a part of a longer article on modding basics.
Edit: If you are trying to install a .zip at that screen just hit the power button to get past it.
Click to expand...
Click to collapse
Perfect assessment,
I am unsure how I ended up with the custom recover image... sorted and flashing properly.
Than you
sikstiks said:
Perfect assessment,
I am unsure how I ended up with the custom recover image... sorted and flashing properly.
Than you
Click to expand...
Click to collapse
The previous owner probably put it on to install Streakdroid. Glad you got it sorted out.
sikstiks said:
Allo Allo!!
After jumping ship from the Samsung Captivate world... I found myself the proud new owner of a Dell Streak!!
I was happy to find a development forum for the device, and SUPER pumped getting to know my new toy!! Hehehe..
When I got the Streak.. it was used, and already had a Streakdroid 1.9.1 custom ROM installed on it,
Great ROM as far as I can tell, and will likely end up back on the ROM.
But... I am inclined to start from the ground up with the device.
I have been poking around the Streak forums looking for a definitive method to return the device back to its original state.
Any help or direction would be AWESOME!!! I learned my lesson bricking a couple of Cappys, to ask first instead of trusting sometimes conflicting methods posted.
I want to take my Dell Streak 5, running Streakdroid 1.9.1 ... and return it to the factory ROM, newest firmware.
Anybody?
Click to expand...
Click to collapse
Welcome aboard fellow Streaker

help to update dell streak 5

Hello guys,i am a complete novice to dell and have a dell streak 5 that is running android version
2.2.2
base band version GAUSB1A135100-EU.
kernel version
2.6.32.9-dj_steve-BFS-CFQ-KGSL2D-Vol-OC
oem version
190
build number
StreakDroid 1.9.0 from a DJ steve (on device when i purchased) and has basically ground to a Holt
I do not have much of an idea but i know that it needs updating.having read the forums about the updates my head is all over the place.
i ask please for a link to the correct firmware i need to flash.. and what i need to flash with the easiest way
Hope you can help me and point me in the right direction..I have took the time to read the forums but i still have no idea what i need for this device
as i have just received it.
Many many thanks in advance
Rather open-ended question because the correct firmware is going to vary depending on what you want to do. For instance, do you wish to revert to a stock ROM? Do you want to be as up to date as possible? Are certain features important to you?
I personally don't recommend going back to stock, but to go forward and get a custom gingerbread ROM. Check the development forum for four good ones: Longhorn 2.9.1, DSC 1.2, Cyanogenmod 7, and MIUI.
Strephon Alkhalikoi said:
Rather open-ended question because the correct firmware is going to vary depending on what you want to do. For instance, do you wish to revert to a stock ROM? Do you want to be as up to date as possible? Are certain features important to you?
I personally don't recommend going back to stock, but to go forward and get a custom gingerbread ROM. Check the development forum for four good ones: Longhorn 2.9.1, DSC 1.2, Cyanogenmod 7, and MIUI.
Click to expand...
Click to collapse
Hi and thanks for taking time to reply,I am going to go back to stock to keep it as simple as possible to move device on,if its running stock there can be no hassles for new owner,i have the dell stock gingerbread update.
I will do a factory reset prior to flash and then put update on root of sd then boot to recovery and install IS THAT CORRECT?
many thanks
sas007 said:
Hi and thanks for taking time to reply,I am going to go back to stock to keep it as simple as possible to move device on,if its running stock there can be no hassles for new owner,i have the dell stock gingerbread update.
I will do a factory reset prior to flash and then put update on root of sd then boot to recovery and install IS THAT CORRECT?
many thanks
Click to expand...
Click to collapse
no need to revert to stock then... streakdroid 1.9 is the best for 2.2.2... so whats the point on going back to stock...? all stock are not optimized at all and have many hidden and useless application in it...
last time i tried using the deodexed stock but still it is not enough and does drain the battery too... custom rom is way better...
but if you insist on going stock.. i am not stopping you.. do what ever you want.. also updating to stock gingerbread such as olleh 407 has its own problem too...
deysmacro said:
no need to revert to stock then... streakdroid 1.9 is the best for 2.2.2... so whats the point on going back to stock...? all stock are not optimized at all and have many hidden and useless application in it...
last time i tried using the deodexed stock but still it is not enough and does drain the battery too... custom rom is way better...
but if you insist on going stock.. i am not stopping you.. do what ever you want.. also updating to stock gingerbread such as olleh 407 has its own problem too...
Click to expand...
Click to collapse
Thanks for your help...if possible could you point me to the correct1.9 as i have no clue as so many roms and how do i apply it..I have read the threads and i am dizzy and to what i have to do as i have never been near a dell streak,never even knew they existed
so i will take that advice as i know your right i just thought stock would be easy to apply less hassle as i just want to get device up and running and stable.
again thank you for your help
sas007 said:
Thanks for your help...if possible could you point me to the correct1.9 as i have no clue as so many roms and how do i apply it..I have read the threads and i am dizzy and to what i have to do as i have never been near a dell streak,never even knew they existed
so i will take that advice as i know your right i just thought stock would be easy to apply less hassle as i just want to get device up and running and stable.
again thank you for your help
Click to expand...
Click to collapse
if your streak is currently working right now... dont try to do something.. ask someone who really knows instead... i mean physically...
here is the list of all available custom roms...
http://forum.xda-developers.com/wiki/Dell_Streak/ROMs
and stock roms...
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak#Official
be sure to use search next time... because everything that you wanted to know is already been answered numerous times ...
get to know this forum.. browse through it... read everything.... dont skip... no shortcut...
deysmacro said:
if your streak is currently working right now... dont try to do something.. ask someone who really knows instead... i mean physically...
here is the list of all available custom roms...
http://forum.xda-developers.com/wiki/Dell_Streak/ROMs
and stock roms...
http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak#Official
be sure to use search next time... because everything that you wanted to know is already been answered numerous times ...
get to know this forum.. browse through it... read everything.... dont skip... no shortcut...
Click to expand...
Click to collapse
First thanks for you help and taking time to reply'second I have searched and read and as I said it is totally confusing for me as new to dell'some folks need to read why Xda started and about the journey'why do some folks get upset when others ask for help,not everyone is at the same level of android knowledge as others and therfore need a little help,I have helped many users on xda and never even thought are you stupid or what,can you not read...I have given it gladly as I was there once...
Help should be given willingly and without knowledge bias or you should not bother being on the site'just because you know more about a certain piece of kit does not give anyone the right to be all high and mighty...you know this thread inside out I do not so I asked for help.
Some folks need to take a look back at when thier journey into android started...did you ask for help??.have you never asked for help??
Again thanks
Sent from my ONDA MID using xda premium
sas007 said:
First thanks for you help and taking time to reply'second I have searched and read and as I said it is totally confusing for me as new to dell'some folks need to read why Xda started and about the journey'why do some folks get upset when others ask for help,not everyone is at the same level of android knowledge as others and therfore need a little help,I have helped many users on xda and never even thought are you stupid or what,can you not read...I have given it gladly as I was there once...
Help should be given willingly and without knowledge bias or you should not bother being on the site'just because you know more about a certain piece of kit does not give anyone the right to be all high and mighty...you know this thread inside out I do not so I asked for help.
Some folks need to take a look back at when thier journey into android started...did you ask for help??.have you never asked for help??
Again thanks
Sent from my ONDA MID using xda premium
Click to expand...
Click to collapse
to be honest... i dont know this thread inside out... i also use search you know... i dont bother asking for help.. because all the information is here... doing homework and it will get through one way or another...
sas007 said:
Hi and thanks for taking time to reply,I am going to go back to stock to keep it as simple as possible to move device on,if its running stock there can be no hassles for new owner,i have the dell stock gingerbread update.
I will do a factory reset prior to flash and then put update on root of sd then boot to recovery and install IS THAT CORRECT?
many thanks
Click to expand...
Click to collapse
I see from other posts that you are going to put 407 on the device and with this post why you're going that route is clear. Factory reset isn't required prior to flashing because flashing the ROM itself will wipe everything. What is required is that the stock recovery image for 407 be placed on the device before attempting to flash the ROM. Otherwise it won't work. I'm not going to go into detail on how to change the recovery image because there are sticky posts galore that have all the relevant info. A good thread to look at is in Streak 5 Android Development, titled "Everything you always wanted to know about the Streak but were too busy bricking it".
Strephon Alkhalikoi said:
I see from other posts that you are going to put 407 on the device and with this post why you're going that route is clear. Factory reset isn't required prior to flashing because flashing the ROM itself will wipe everything. What is required is that the stock recovery image for 407 be placed on the device before attempting to flash the ROM. Otherwise it won't work. I'm not going to go into detail on how to change the recovery image because there are sticky posts galore that have all the relevant info. A good thread to look at is in Streak 5 Android Development, titled "Everything you always wanted to know about the Streak but were too busy bricking it".
Click to expand...
Click to collapse
Hi mate thank you for your kind help,yes I have the stock recovery to flash first.the download contained both recovery and rom image.
I think I am about there with what to do...flash recovery with flashboot then boot to that recovery and install firmware from sd card having changed to update 'what I am still a little perplexed about is the region I think the firmware is 00,what do I need for U.K.
Thankyou again
Sent from my ONDA MID using xda premium
deysmacro said:
to be honest... i dont know this thread inside out... i also use search you know... i dont bother asking for help.. because all the information is here... doing homework and it will get through one way or another...
Click to expand...
Click to collapse
I get all that but I needed to ask...and folks should not be made to feel bad just because they have asked for help... I had no idea as to what to search for as I have never even seen a dell before,I assumed it would be as other androids get a stock rom and just flash but was hit with so many differant roms...ones for each region etc.l could not find a post that said LATEST STOCK ROM FOR U.K DELL STREAK 5 or anything like it,and it was a hell of a lot more complicated than I imagined so I was stuck and asked for help.Thankfully with the snippets of help I have been given I am more knowledgable now and even capable of flashing the device properly I hope...and if for some reason someone else needs to know the same I will pass on what I have learnt from you guys gladly to help a android user
Once again thank you for your help and infomation
Sent from my ONDA MID using xda premium
I just got an unlocked UK Dell streak and it was running the 351 firmware so I'm guessing that's the standard one
Sent from my GT-I9100 using xda app-developers app
Hayth said:
I just got an unlocked UK Dell streak and it was running the 351 firmware so I'm guessing that's the standard one
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
They are a lot of official roms, take a look here. Custom roms can be found here.
Hayth said:
I just got an unlocked UK Dell streak and it was running the 351 firmware so I'm guessing that's the standard one
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
That's what I needed to know "351 firmware"cheers guys...
Thanks for replying...
Sent from my ONDA MID using xda premium
sas007 said:
what I am still a little perplexed about is the region I think the firmware is 00, what do I need for U.K.
Click to expand...
Click to collapse
The country you are in and the carrier you are using do not matter when it comes to flashing a Streak ROM. All that matters is whether the region of the recovery matches the region of the ROM you are installing. Thus, for 407, you would need a region 14 recovery as 407 is a region 14 ROM. Unlocked Streaks purchased direct from Dell had their own region, 00. To flash one of those ROMs, e.g. 360, you would need a region 00 recovery.
I hope that clears things up.
I bought my streak from india and it has has rom 357
I want to ask tha can I install any rom on it or first I have to match region code or any thing else....please help
Sent from my Dell Streak using xda premium
all information gathered together
sas007 said:
Hello guys,i am a complete novice to dell and have a dell streak 5 that is running android version
2.2.2
base band version GAUSB1A135100-EU.
kernel version
2.6.32.9-dj_steve-BFS-CFQ-KGSL2D-Vol-OC
oem version
190
build number
StreakDroid 1.9.0 from a DJ steve (on device when i purchased) and has basically ground to a Holt
I do not have much of an idea but i know that it needs updating.having read the forums about the updates my head is all over the place.
i ask please for a link to the correct firmware i need to flash.. and what i need to flash with the easiest way
Hope you can help me and point me in the right direction..I have took the time to read the forums but i still have no idea what i need for this device
as i have just received it.
Many many thanks in advance
Click to expand...
Click to collapse
follow the link to the article that should help you : http://forum.xda-developers.com/showthread.php?t=1836662

[Q] 1.6 firmware build no 3883 - System updates not working?

Hello to ANYONE who can help me....
I bought a Dell Streak 5 and Im slowly going insane. I've tried system updates, manually downloading a file here and there, trying to upgrade the operating system in any which way I can. But its not working.
I'm sorry but im your worst nightmare - Someone with very basic skills...Im ok with pc's but mobile phone operating systems are another story!
Ok heres what I have in the 'About device' section:
Firmware version: 1.6
Baseband version: GAUSB1A110421-EU
Kernal version: 2.6.29-perf
OEM version: GAUSB1A110421
Build no: 3883
Im in the UK, its locked to 02.
What do I do?
Here's my silly questions:
DO I need the SD card in the phone for the software update?
I've notices DJ Steve done something that has no files anywhere with the links still on the info on websites?
When I click to system update on the phone, it goes to DELL and i go through the clicking, to then get a '404 - file or directory not found' ?
Any help would be appreciated x
K-inkz x
Is there a one-stop-shop that can do it all for me (less headaches & stress)
To answer your last question first, no.
DJ Steve's info is dead and buried, along with Dell's OTA system for the Streak. The current custom ROMs are in the Development forum.
In general, you want to upgrade you need to start reading the info given in the wiki and in various posts on these forums. I can tell you that this thread gives general comments on the hoops you have to go through to upgrade from 1.6 to 2.3.3.
If I remember correctly, I used the QDL tool to update 1.6 to 2.3 prior to it being officially released by Dell. Is that not an option?
By his own admission he isn't tech savvy so that could cause more problems for him than it solves. Having never used the QDL Tool myself, you would know more than I in that regard as to what's involved.
Strephon Alkhalikoi said:
By his own admission he isn't tech savvy so that could cause more problems for him than it solves. Having never used the QDL Tool myself, you would know more than I in that regard as to what's involved.
Click to expand...
Click to collapse
Understood. Just to put this out there, I do have the QDL tool and tutorials in both word document and shock-wave player that walks you through the process. Just let me know and I can provide a link via PM to the files.
TheManii still has a link to the QDL tool on his dev-host account. But those tutorials could be very useful.
Here is what I have;
View attachment 2522228
View attachment qdltool-tutorial.zip
Strephon Alkhalikoi said:
TheManii still has a link to the QDL tool on his dev-host account. But those tutorials could be very useful.
Click to expand...
Click to collapse
Thanks guys, this is very helpful. I'm also trying to update my Streak 5 (unlocked) running 1.6 but after I download the 2.2 software update from Dell and reboot/install it just hangs at the Dell logo screen. I also tried flashing a custom recovery via fastboot. It says write successful but when I try to boot into the recovery I just get a blank screen. I've tried CWM, TeamWin and StreakMod all with the same result. I was thinking there was an issue with installing those on 1.6 so figured I'd update the firmware first. Looks like I need to do some more research.
Thanks
Thanks for info!
Strephon Alkhalikoi said:
To answer your last question first, no.
DJ Steve's info is dead and buried, along with Dell's OTA system for the Streak. The current custom ROMs are in the Development forum.
In general, you want to upgrade you need to start reading the info given in the wiki and in various posts on these forums. I can tell you that this thread gives general comments on the hoops you have to go through to upgrade from 1.6 to 2.3.3.
Click to expand...
Click to collapse
Thanks mister, I shall go read and try and understand all this flashing, rooting stuff! haha x
rsfinsrq said:
Here is what I have;
Streak Upgrade Guide.docx
qdltool-tutorial.zip
Click to expand...
Click to collapse
K-inkz said:
Thanks mister, I shall go read and try and understand all this flashing, rooting stuff! haha x
Click to expand...
Click to collapse
No need to root at all before hand. Following the QDLTool and Streak Upgrade guide tutorial's and getting the drivers and everything setup, all I did was run QDLTool to factory reset from Android 1.6 to 2.2. Once I did that it's as easy as flashing a recovery with Fastboot and then throwing a custom ROM on your SD card to flash.
I'm running StreakMod recovery with the Traveler DSC ROM.
Thanks all for info x
IA-32e said:
No need to root at all before hand. Following the QDLTool and Streak Upgrade guide tutorial's and getting the drivers and everything setup, all I did was run QDLTool to factory reset from Android 1.6 to 2.2. Once I did that it's as easy as flashing a recovery with Fastboot and then throwing a custom ROM on your SD card to flash.
I'm running StreakMod recovery with the Traveler DSC ROM.
Click to expand...
Click to collapse
OK, Thanks for your advice, Im gonna have a go in the morning as I have a headache right now...
Thanks all for the input/advice. I appreciate it.
PS: Someone thought I was a guy hehe, Sorry to correct but im definitely a girl! x
Without evidence to the contrary, it's messy to say "he/she/it".

Categories

Resources