I installed debian squeeze via an app just called Linux Installer. installed ICEWM and xorg via apt-get but when i run startx I get a no screens found error. How can I fix this?
Edit: sorry heres the full report but its on my phone(optimus v).
Primary device is not PCI
(EE) open /dev/fb0: no such file or directory
(EE) No devices detected
Fatal server error:
no screens found
xinit: No such file or directory (errno 2): unable to connect to X server
xinit: No such process (errno 3): Server error.
Related
Hi
I tried to install AMP(apache, mysql, php5) since I was interested on using Atrix as a web server.
Apache was success, but MySQL was failure. No MySQL, No PHP5(of course)
I tried force installing Busybox using dpkg expecting to be updated(version stayed same), removing and making directories that makes the problem, No luck.
I think it's related to my outdated Busybox(readlink?) There's too many problems here.
Lot of people just say "it's impossible" but why not? At least I want to know why it fails.
I have terminal log below. Sorry for bad, bad english.
Thanks
[email protected]:/$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
obconf leafpad lxde-common linux-libc-dev lxrandr pcmanfm lxde-core lxappearance gpicview libc6-dev lxpanel
lxde-settings-daemon xarchiver
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 120 not upgraded.
3 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up mysql-server-5.0 (5.1.30really5.0.75-0ubuntu10.5) ...
* Stopping MySQL database server mysqld [ OK ]
mkdir: cannot create directory `/var/log/mysql': No such file or directory
dpkg: error processing mysql-server-5.0 (--configure):
subprocess post-installation script returned error exit status 1
Setting up libapache2-mod-php5 (5.2.6.dfsg.1-3ubuntu4.6) ...
readlink: invalid option -- 'q'
BusyBox v1.10.2 (Ubuntu 1:1.10.2-2ubuntu7) multi-call binary
Usage: readlink [-f] FILE
Display the value of a symlink
Options:
-f Canonicalize by following all symlinks
ucf: Unable to determine The new file
dpkg: error processing libapache2-mod-php5 (--configure):
subprocess post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of php5-mysql:
php5-mysql depends on phpapi-20060613+lfs; however:
Package phpapi-20060613+lfs is not installed.
Package libapache2-mod-php5 which provides phpapi-20060613+lfs is not configured yet.
dpkg: error processing php5-mysql (--configure):
dependency problems - leaving unconfigured
No apport report written because the error message indicates its a followup error from a previous failure.
Errors were encountered while processing:
mysql-server-5.0
libapache2-mod-php5
php5-mysql
E: Sub-process /usr/bin/dpkg returned an error code (1)
Click to expand...
Click to collapse
vctshim said:
Hi
I tried to install AMP(apache, mysql, php5) since I was interested on using Atrix as a web server.
Apache was success, but MySQL was failure. No MySQL, No PHP5(of course)
I tried force installing Busybox using dpkg expecting to be updated(version stayed same), removing and making directories that makes the problem, No luck.
I think it's related to my outdated Busybox(readlink?) There's too many problems here.
Lot of people just say "it's impossible" but why not? At least I want to know why it fails.
I have terminal log below. Sorry for bad, bad english.
Thanks
Click to expand...
Click to collapse
Hi, could you solve the issue? I wan to install it too, for my work.
Thanks!
douglasroos said:
Hi, could you solve the issue? I wan to install it too, for my work.
Thanks!
Click to expand...
Click to collapse
I found out it is impossible. Many repos are dead and crucially Ubuntu in this is outdated (without LTS)
I sold the Atrix and bought ARM-based Open PCs (e.g. Raspberry Pi, Cubieboard, Beaglebone Black, Udoo, etc..)
If you want low-power web server, this might be the way to go
(Ubuntu Phone might work but I'm not sure YET)
Hi;
I have a problem.
I don't have Internet on Ubuntu. I want to set up as offline. I transferred .deb package on Ubuntu with using USB memory.
When I use theese codes in terminal.
sudo dpkg -i packagename.deb
I'm getting the following error.
ERROR :
dpkg:dependency problems prevent configuration of git:
git depends on liberror-perl ; however
Package liberror-perl is not installed.
if you can help I'll be happy. Good Work.
I have:
1. VirtualBox 4.3.15.r95713
2. Windows 7 64bit and
3. Genymotion 2.2.2
When I try to run genymoton I get following error:
Code:
Unable to load VirtualBox engine.
---------------------------
Unable to load VirtualBox engine.<br><br>Make sure that you have installed it correctly before starting Genymotion.<br><br>For more information, refer to <a href='https://cloud.genymotion.com/page/faq/#vbox'><font color='#FFF'>https://cloud.genymotion.com/page/faq/#vbox</font></a><br><br>Genymotion logs archive has been generated in: C:/Users/Jalle/genymotion-log.zip<br><a href='https://cloud.genymotion.com/page/support/'><font color='#FFF'>For more help, contact our customer service.</font></a>
and error log shows
Code:
kol 29 09:02:36 [Genymotion] [Error] "Fail to load vboxmanage plugin from C:/Program Files/Genymobile/Genymotion/plugins/"
kol 29 09:02:36 [Genymotion] [Error] VM Engine failed to load
kol 29 09:02:36 [Genymotion] [Error] Unable to find VM Engine. Plugin loading aborted.
kol 29 09:02:36 [Genymotion] [Debug] [LogCollector] VM engine not available
also I setup VBox - NEtwork - HostOnly adapter like this:
Code:
ipv4 address: 192.168.56.1
Net mask: 255.255.255.0
DHCP
192.168.56.100
255.255.255.0
192.168.56.101
192.168.56.254
but still having same error:
So, how do i make latest VBox and Ganymotion run together ?
Genymotion gave me same error when I re-installed VirtualBox.
Turns out that the 1st time VirtualBox was installed in: C:\Program Files\Oracle VM VirtualBox and this was in registry (for genymotion VBoxPath)
and 2nd time it was installed in "C:\Program Files\Oracle\VirtualBox".
So, to fix this I had to change the path in registry at path:
HKEY_CURRENT_USER\Software\Genymobile\Genymotion\ for value "VBoxPath" to: "C:\Program Files\Oracle\VirtualBox\VBoxManage.exe"
and
HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\VirtualBox for value "InstallDir" to: "C:\Program Files\Oracle\VirtualBox"
Once I set the correct path and logged off and logged back on, it started working again.
Log off/log on or reboot is required to reload the registry.
apatsy said:
Genymotion gave me same error when I re-installed VirtualBox.
Turns out that the 1st time VirtualBox was installed in: C:\Program Files\Oracle VM VirtualBox and this was in registry (for genymotion VBoxPath)
and 2nd time it was installed in "C:\Program Files\Oracle\VirtualBox".
So, to fix this I had to change the path in registry at path:
HKEY_CURRENT_USER\Software\Genymobile\Genymotion\ for value "VBoxPath" to: "C:\Program Files\Oracle\VirtualBox\\VBoxManage.exe"
and
HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\VirtualBox for value "InstallDir" to: "C:\Program Files\Oracle\VirtualBox"
Once I set the correct path and logged off and logged back on, it started working again.
Log off/log on or reboot is required to reload the registry.
Click to expand...
Click to collapse
Why the double backslash in front of VBoxManage.exe?
eazyigz said:
Why the double backslash in front of VBoxManage.exe?
Click to expand...
Click to collapse
Sorry it was a typo. I fixed it. Thanks for pointing it out.
Hi
I'm trying to run pidgin in ubuntu touch which is installed on Nexus 5.
I did try to run it in libertine container, however it fails with the follwoing error.
Code:
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
(EE)
Fatal server error:
(EE) Failed to connect to Mir: Failed to connect: not accepted by server
(EE)
I have also tried to run it without the container using the following desktop file
Code:
[Desktop Entry]
Name=Pidgin Internet Messenger
GenericName=Internet Messenger
Comment=Chat over IM. Supports AIM, Google Talk, Jabber/XMPP, MSN, Yahoo and more
Exec=pidgin
Icon=pidgin
StartupNotify=true
Terminal=false
Type=Application
Categories=Network;InstantMessaging;
X-MessagingMenu-UsesChatSection=true
X-Ubuntu-Touch=true
X-Ubuntu-Gettext-Domain=pidgin
X-Ubuntu-XMir-Enable=true
To run pidgin I am using the following script, launching it from phone's command line
Code:
#!/bin/bash
DISP=:1
Xmir :1 -mirSocket /var/run/mir_socket --desktop_file_hint=/home/phablet/pidgin.desktop -debug &
sleep 0.5;
DISPLAY=:1 pidgin &
However, Xmir failed with the following error.
Code:
ARM architecture: Defaulting to software mode because glamor is not stable
XMir initialized with 2 visuals:
Visual id 0x28: ff ff00 ff0000, 24 planes
Visual id 0x29: ff ff00 ff0000, 24 planes
Realize ROOT window 0xb8a6d530 id=0xea "": 1080x1920 +0+0 parent=(nil)
depth=24 redir=0 type=0 class=1 visibility=3 viewable=1
override=0 _NET_WM_WINDOW_TYPE=0()
WM_TRANSIENT_FOR=(nil)
WM_HINTS=<none>
Aborted
I checked that unity is running, and the resullt of "ps aux | grep unity" was
Code:
unity-system-compositor --disable-overlays=false --spinner=/usr/bin/unity-system-compositor-spinner --file /run/mir_socket --from-dm-fd 10 --to-dm-fd 13 --vt 1
I also checked that mir_socket is created and reachable under /var/run and /run directories
There are no errors in lightdm file
But Xorg log file shows the following error
Code:
[ 89.205] (II) No BusID or DriverName specified - opening /dev/dri/card0
directory
[ 89.205] (WW) Falling back to old probe method for fbdev
[ 89.205] (WW) Falling back to old probe method for modesetting
[ 89.206] No devices to configure. Configuration failed.
[ 89.206] (EE) Server terminated with error (2). Closing log file.
The directory /dev/dri is missing on my phone. Although libdrm2 is installed
Any ideas how to overcome this problem?
Mqhash said:
Hi
I'm trying to run pidgin in ubuntu touch which is installed on Nexus 5.
I did try to run it in libertine container, however it fails with the follwoing error.
Code:
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
(EE)
Fatal server error:
(EE) Failed to connect to Mir: Failed to connect: not accepted by server
(EE)
I have also tried to run it without the container using the following desktop file
Code:
[Desktop Entry]
Name=Pidgin Internet Messenger
GenericName=Internet Messenger
Comment=Chat over IM. Supports AIM, Google Talk, Jabber/XMPP, MSN, Yahoo and more
Exec=pidgin
Icon=pidgin
StartupNotify=true
Terminal=false
Type=Application
Categories=Network;InstantMessaging;
X-MessagingMenu-UsesChatSection=true
X-Ubuntu-Touch=true
X-Ubuntu-Gettext-Domain=pidgin
X-Ubuntu-XMir-Enable=true
To run pidgin I am using the following script, launching it from phone's command line
Code:
#!/bin/bash
DISP=:1
Xmir :1 -mirSocket /var/run/mir_socket --desktop_file_hint=/home/phablet/pidgin.desktop -debug &
sleep 0.5;
DISPLAY=:1 pidgin &
However, Xmir failed with the following error.
Code:
ARM architecture: Defaulting to software mode because glamor is not stable
XMir initialized with 2 visuals:
Visual id 0x28: ff ff00 ff0000, 24 planes
Visual id 0x29: ff ff00 ff0000, 24 planes
Realize ROOT window 0xb8a6d530 id=0xea "": 1080x1920 +0+0 parent=(nil)
depth=24 redir=0 type=0 class=1 visibility=3 viewable=1
override=0 _NET_WM_WINDOW_TYPE=0()
WM_TRANSIENT_FOR=(nil)
WM_HINTS=<none>
Aborted
I checked that unity is running, and the resullt of "ps aux | grep unity" was
Code:
unity-system-compositor --disable-overlays=false --spinner=/usr/bin/unity-system-compositor-spinner --file /run/mir_socket --from-dm-fd 10 --to-dm-fd 13 --vt 1
I also checked that mir_socket is created and reachable under /var/run and /run directories
There are no errors in lightdm file
But Xorg log file shows the following error
Code:
[ 89.205] (II) No BusID or DriverName specified - opening /dev/dri/card0
directory
[ 89.205] (WW) Falling back to old probe method for fbdev
[ 89.205] (WW) Falling back to old probe method for modesetting
[ 89.206] No devices to configure. Configuration failed.
[ 89.206] (EE) Server terminated with error (2). Closing log file.
The directory /dev/dri is missing on my phone. Although libdrm2 is installed
Any ideas how to overcome this problem?
Click to expand...
Click to collapse
Unfortunately, the only real good method of running X11 applications on Ubuntu Touch is via Libertine. That's odd that it won't connect to Mir. /dev/dri should indeed be missing from your phone, most phones do not expose DRM/DRI to the OS as they don't always have native support for it (for example, Qualcomm devices require the msm_kgsl_drm kernel module, however that module doesn't compile properly on newer kernels.)
On Android devices, an abstraction layer known as Libhybris is used for handling graphics and hardware by wrapping the native Android drivers and using them.
The only thing I could suggest is possibly creating a new empty libertine container and install only pidgin on it to see if it could possibly be an issue with your container, last time I used Ubuntu Touch, Pidgin worked out of the box in Libertine.
Thank you for your reply
ShadowEO said:
The only thing I could suggest is possibly creating a new empty libertine container and install only pidgin on it to see if it could possibly be an issue with your container.
Click to expand...
Click to collapse
Unfortunately, I did try to create a new container but same error. No change . I even tried to run firefox but same error
ShadowEO said:
last time I used Ubuntu Touch, Pidgin worked out of the box in Libertine.
Click to expand...
Click to collapse
What phone were you running ubuntu touch on?
Mqhash said:
Hi
I'm trying to run pidgin in ubuntu touch which is installed on Nexus 5.
I did try to run it in libertine container, however it fails with the follwoing error.
Code:
_XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running
(EE)
Fatal server error:
(EE) Failed to connect to Mir: Failed to connect: not accepted by server
(EE)
Click to expand...
Click to collapse
How exactly did you get to this point? Which UT image? Was libertine included? The scope? The app? Did you install parts of it via apt? How did you run it? Where/how do you read the error?
I have also tried to run it without the container using the following desktop file
Click to expand...
Click to collapse
When you say without the container what exactly do you mean? If you only make the desktop file yourself, then there still is only one pidgin executable and that is the one in the container, right ... I don't know how to connect the two.
Code:
[Desktop Entry]
Name=Pidgin Internet Messenger
GenericName=Internet Messenger
Comment=Chat over IM. Supports AIM, Google Talk, Jabber/XMPP, MSN, Yahoo and more
Exec=pidgin
Icon=pidgin
StartupNotify=true
Terminal=false
Type=Application
Categories=Network;InstantMessaging;
X-MessagingMenu-UsesChatSection=true
X-Ubuntu-Touch=true
X-Ubuntu-Gettext-Domain=pidgin
X-Ubuntu-XMir-Enable=true
To run pidgin I am using the following script, launching it from phone's command line
Code:
#!/bin/bash
DISP=:1
Xmir :1 -mirSocket /var/run/mir_socket --desktop_file_hint=/home/phablet/pidgin.desktop -debug &
sleep 0.5;
DISPLAY=:1 pidgin &
However, Xmir failed with the following error.
Code:
ARM architecture: Defaulting to software mode because glamor is not stable
XMir initialized with 2 visuals:
Visual id 0x28: ff ff00 ff0000, 24 planes
Visual id 0x29: ff ff00 ff0000, 24 planes
Realize ROOT window 0xb8a6d530 id=0xea "": 1080x1920 +0+0 parent=(nil)
depth=24 redir=0 type=0 class=1 visibility=3 viewable=1
override=0 _NET_WM_WINDOW_TYPE=0()
WM_TRANSIENT_FOR=(nil)
WM_HINTS=<none>
Aborted
Click to expand...
Click to collapse
So, firstly, I think libertine should work, so I'd focus on that first. Secondly, if you want to explore an alternative route, I had things working in the past with:
* install via apt
* write a shell script like yours (search the internet for that desktop_file_hint, it seems to have some magical hidden meaning, you do not want to set it to pidgin, but I think to some uhm, whatdidtheycallit, "unconfined" app I think)
* write a desktop file and point it to shell script, and launch it by tapping on the display
[APKMULTITOOL] Error when signing (sign apk with android market 13 & 7 zip, sign, in)
Hello folks, I have stumbled upon a small problem using APKMultiTool ...
When I try to sign my apk (It's a unity apk meaning I only edited 1 of the dll files.) It fails.
The error it gives me, even in log (26) is useless.
Code:
--------------------------------------------------------------------------
|26-07-2018 -- 13:55:05,73|
--------------------------------------------------------------------------
java version "10.0.2" 2018-07-17
Java(TM) SE Runtime Environment 18.3 (build 10.0.2+13)
Java HotSpot(TM) 64-Bit Server VM 18.3 (build 10.0.2+13, mixed mode)
Press any key to continue . . .
I do have the environment path for system, directed to my JDK java path.
The APKMultiTool is opened with Administrator and it's at root(c:\APKMultiTool) <
Heres the code it gives me at the end of option 7: (zip, sign & install)
Code:
Compressing res\layout\com_facebook_placepickerfragment_list_row.xml
Compressing res\layout\com_facebook_search_bar_layout.xml
Compressing res\layout\com_facebook_tooltip_bubble.xml
Compressing res\layout\com_facebook_usersettingsfragment.xml
Everything is Ok
Signing Apk
Usage: signapk [-w] publickey.x509[.pem] privatekey.pk8 input.jar output.jar
"An Error Occurred, Please Check The Log (option 26)"
The error afterwards in the log file and when using 26, is still the same.
Now I'm going to just try to sign the unsigned apk. First the one that was just zipped.
I do this with option 13: Sign apk with android market
Code:
Please make your decision:13
*Notice this option requires you to have the Java JDK installed before this option will function*
*Notice you need to go into your Environment Variables and set the path to your JAVA_HOME*
*For example define it as C:\Program Files\Java\jdk1.6.0_43 as a system variables slot not the User Variables*
Press any key to continue . . .
Signing Apk
Only one alias can be specified
Please type jarsigner -help for usage
"An Error Occurred, Please Check The Log (option 26)"
I am unable to type jarsigner -help, in CMD it does not exist as a command, and in APKMT it closes the prompt. The log file and 26 gives me the same error text so far, meaning it was not even updated.
(Note: I open ALL prompts as Administator, also APKMT)
I am at a complete loss...
Would be really grateful for input :3 thanks a lot.
-EDIT-
Am unable to install unsigned apk on rooted bluestacks 3n device. :3
... I found out that if I used the new tool
https://forum.xda-developers.com/an...tool-apk-easy-tool-v1-02-windows-gui-t3333960
APK Easy Tool, everything became more organized and much easier to work with. I got it working and are happy to say that my first mod was succesful, yay.
Happy modding everyone
For reference, the apk I modded was Galactic Rush for Android