These seem to be the stock Korean SII firmware for the two main carriers:
For SHW-M250K (KTF firmware) http://matpclub.com/s/pxeboard31/2706591
For SHW-M250S (SKT firmware) http://matpclub.com/s/pxeboard31/2698765
It's a torrent? It's just been uploaded (as in, just then, lol) so no seeds, give it some time I guess. Time for me to go back to the stock firmware maybe.
Anyone more experienced willing to grab them and go over them?
Update:
http://www.megaupload.com/?d=UYYWHYOY
http://www.megaupload.com/?d=T8Y80YBG
http://www.megaupload.com/?d=32NTASOW
M250K.EE31
http://www.megaupload.com/?d=4J24QBTK
anyone find call recording in there?
I desperately need the SHW-M250K (KTF firmware) but I can´t work out how to get the torrent file and the megaupload links seem to be dead (at least they can´t be opened in China).
Whenever o try to download HOME_M250K.EE05.0315_CL186865_REV02_user_low_ship.tar.torrent , I just get another page in korean and can´t get through it
You need to sign up for an account to download the torrent file.
I've attached them anyway, there seems to be two EE05 torrents, dunno what's going on there.
Thanks a lot
I was trying to root a SHW-M250K with XWKDD_insecure but something went wrong, so i think now the best thing to do is re-flash the firmware and try again. Which torrent is for the (KTF firmware)?
Did you root yours?
XWKDD_insecure will work, it'll root fine but you'll be stuck in a boot loop. Just need to reflash the stock kernel afterwards.
Mine's rooted and purring along nicely. I'm using the latest M250K.EE19 with the overclock kernel from here: http://matpclub.com/s/?mid=pxeboard10&category=1191749&document_srl=2804608
I used the S2 ED24 rooting kernel (from here?) to root it first. Again, it did a boot loop but the root worked fine, just flashed the OC kernel afterwards.
For EE05 just flash the rooting kernel, root it and reflash the stock kernel. Done.
I suggest you sign up for http://matpclub.com/s/matcl
Considering you have the Korean model it's almost a necessity.
sorry for all the question but I just want to know If I got this straight.
So all I have to do to is to use Odin to flash the file KT_GalaxyS2_EE05_rooting.zip and then get it back in download mode and re-flash T_GalaxyS2_EE05_stock_kernel.zip
If you're on EE05 firmware, all you have to do is:
1. Go into download mode.
2. Flash the EE05 'rooting' kernel
3. Run superoneclick and root the phone. It'll tell you if it's successful.
4. Go back into download mode and flash the stock EE05 kernel back.
I ran Odin but when i click on the PDA it doesnt allow me to choose the .zip files.
How do I flash with these .zip files?
Uh, you need to extract the tarball from the zip file. Odin will flash using the .tar file.
After a weekend of worrying about the damn phone finally your method worked like a charm, thanks so much!
I still need to figure out how to unlock it but all in due time.
I looked at http://matpclub.com/s/matcl as you mentioned but I can´t read any Korean
But thanks again for taking the time to help me, if you ever need anything from China let me know, I owe you big time .
No worries. They'll be opening up an English section of the site in a few months.
Does anyone know what the difference between the EE05 Kernal and the EE31 Kernal is? Do I want to make sure I'm at the latest version?
when I do *#1234# I get
PDA : M250k.EE31.1419
Phone : M250k.EE17.1456.KT
MOVINAND : EE05
Any idea what that means?
could you upload a Gyroscope driver from your Korean phone for my ke7 rom? i use the m250k ,but i want to flash the ke7````thx~!
thanks for the info.
Actually, I am kind of a newbie in android, now I've got SHW-M250K in my hand.
Basically, the latest firmware of my SGS2 is PDA:EE31/PHONE:EE17, and actually KIES said it is the latest firmware.
I can't understand korean language so well, so I can't understand the link that you show to us. I am still living in Korea now, but actually I am Indonesian
My SGS2 is not rooted, and I don't really familiar with "ROOT", However, could someone help me about how to root and what is the latest firmware of this phone?
Could you please make the "how-to" in a simple way that can be followed by newbie like me?
thanks in advance
I want to root my phone and I'm new this this. Can anyone post a step by step with download links? Can't navigate Korean sites. Are there risks to this?
Model number: SHW-250S
Firmware version: 2.3.4
Baseband version: 250S.EG06.0603.ST
Kernel version: 2.6.35.7-M250S.EG14.1208-CL380592
Build Number: GINGERBREAD.EG14
PDA: M250S.EG14.1208
PHONE: M250S.EG06.0603.ST
MOVINAND: EE31
Lucky for you:
http://matpclub.com/?document_srl=3685482
If you follow the third link in that post, you'll end up at a site where you can download:
[Root]HOME_M250S.EG14.1208_CL380592_REV02_user_low_ship.zip
This is a pre-rooted stock firmware.
Download it, then:
Enable debug mode in your phone's applications>Development settings.
Turn the phone off.
Enter download mode. Hold down 'vol. down+Home+power' in that order. Press 'vol up' for yes.
Run odin 1.8.5 then plug your phone into your computer. Odin should light up, if not then reinstall your phone's drivers. Find them on the samsung site or install Kies.
Open 'PDA' and direct it to the .tar file you get when you extract "[Root]HOME_M250S.EG14.1208_CL380592_REV02_user_low_ship.zip"
Don't touch anything else, press Start.
It'll take a few minutes and your phone should restart at the end. If it takes longer than 5 minutes press the home button or restart your phone.
Done.
Sticks02 said:
Lucky for you:
If you follow the third link in that post, you'll end up at a site where you can download:
[Root]HOME_M250S.EG14.1208_CL380592_REV02_user_low_ship.zip
This is a pre-rooted stock firmware.
Download it, then:
Enable debug mode in your phone's applications>Development settings.
Turn the phone off.
Enter download mode. Hold down 'vol. down+Home+power' in that order. Press 'vol up' for yes.
Run odin 1.8.5 then plug your phone into your computer. Odin should light up, if not then reinstall your phone's drivers. Find them on the samsung site or install Kies.
Open 'PDA' and direct it to the .tar file you get when you extract "[Root]HOME_M250S.EG14.1208_CL380592_REV02_user_low_ship.zip"
Don't touch anything else, press Start.
It'll take a few minutes and your phone should restart at the end. If it takes longer than 5 minutes press the home button or restart your phone.
Done.
Click to expand...
Click to collapse
Thanks! Got root.
can you upload torrent file m250s i cant download need log from forum korea i dont undertstand reg..
so none of the links for the three files you need to odin back to stock are working, i've found odin somehwere else but cant find the other two files, anyone know where i can find them?
Keep on googling
Fast Dont Lie
My signature.. you didn't look hard.
(back to stock)
If you are still having trouble with s15274n's links check my sig for an alternate. I highly recommend checking his links as he also has a guide on how to use everything
Hello everybody,
At first I would like to thank you for the anwers you'll post
I'm new in that forum and i hope to find a solution for my trouble
So I installed some apk on my viewpad in order to have the market and to create a google count
But my tablet switch off suddenly and reboot continuely
I found a firware on this site F70_VSAM__ etc and I installed it in recovery mode
but there were a missing file which coundln't be installed : tmp/userdata
I want to tell when I was on recovery mode I made a reset factory but nothing change
Did I eraise all the data on my tablet
The problem is I can't send it to repair because it was rooted with gingerbreak
Have you got some solutions for me ?
I would be very glad to read your post
Thanks so much
I would try to redownload update for and try to update again. Verify file size and or checksum after downloading.
I have not done a factory reset on mine so i can not verify the outcome of a factory reset other than I would bet that all personal data has been removed. Not sure if it effects root.
Also, after you are able to update, you will have to root again using same method.
thanks so much for your answer
but I tried many times and two kind of files and it's the same every time
how could i put a file root and where could i find it ?
Which recovery mode are you in when you try to update? I know that vol up + power on is a different mode than vol down + power on. Have yet to figure what the difference is between the two are.
I have decompressed the update file that i have and there is a userdata.img file in it. Not sure how to tell it to install/update that file.
Mabye you might try different sd card if available.
Also just wondering if it is able to boot, and how far it might get during a normal boot.
Sent from my ADR6300 using XDA
so I used power + up to access the recovery mode and i don't know the difference between the two modes
i decompressed the package and i haven't got the userdata.img file in it and I think that's the trouble
the boot lasts about more than a minute, there are the picture of the birds then after it's written Viewsonic, it's loading for maybe 30s then it reboots
could you give me a copy of your userdata.img i could try to put it on the package
and the link where you find it
thanks so much
I can post up the file but I would not be until tomorrow. I am at work and have all that on my computer at home.
ok I don't mind
I will wait until tomorrow or after
take your time
thanks so much
Try this. I noticed that userdata.img was not in the root of the file but was in fact_recovery.img. Since I can not post that large of a file, and you have extracted the complete update, copy fact_recovery.img to root of sd card. Rename it update.zip and try to get the tablet to install that. With any luck all should go well. The only items in that file are userdata and userstorage, it should not effect any other parts. If you don't have that file let me know and I can post it up somewhere on the web.
i want to thank you so much for your help
yesterday i send a email to the viewsonic's website and today a guy from ups came to take the tablet
so it goes on repair
i hope they could repair it because it was rooted before the trouble
we keep in touch
Sorry for the late !
Hi please se my thread, i had the same problem and i could fix through the recovery and modded update "11252011"
thanks for your answer but I already tried but it didn't work for me
i don't know why i tried to rename in update zip but it was the same problem
wait and see
stephboubou said:
thanks for your answer but I already tried but it didn't work for me
i don't know why i tried to rename in update
zip but it was the same problem
wait and see
Click to expand...
Click to collapse
No really i had the same problem ( original update won't able to fix the loop reboot) but my new modded update is like an hard factory reset (or an format ) I do it for my tablett and fix it
could you give me the link of your thread
i can't find it
thanks so much
http://forum.xda-developers.com/showthread.php?t=1571096 this is the link
EDIT: I found a place to download a zip of Rom Manager Recovery and flashed it. so this can be deleted. Sorry!
Hi, When I try to download Rom Manager from my phone, I can't find it anywhere on the android market at all. and when I go to the play store on my computer and download it to my phone it says it isn't compatible with this phone? I'm confused and don't know how to get it on here? I've already rooted the phone I just want to put a new rom on there. First time I've ever come across this issue with any phone. weird.
nvflash_gtablet_2010110500.zip
I have been trying to get my Gtab up and running. It's caught in a loop and looking in the forums here I gather that one of the files that I need to flash it is nvflash_gtablet_2010110500.zip. The link that I found to a drop box location is dead. Google takes me to the same drop box.
I also read that nvflash_gtablet_2010110500.zip can be referred to as bekit version 1105. Is this correct? I've searched for that file also with no result.
Anyone know where I might be able to obtain this file? Any help would be appreciated.
Don
i'm also looking for these old nvflash files
does anyone have them stashed away somewhere?
Checkout here on the last page. There should be a OneDrive zip download that has the NVFLASH files for bootloader 1.1 and 1.2. It also comes with APX drivers (the android_tegra_froyo_20101105.msi file). Hopefully this is what you where looking for.