IN NEED SOME HELP FOR MY VIEWPAD 7e - Viewsonic ViewPad 7 & Variants

Hello everybody,
At first I would like to thank you for the anwers you'll post
I'm new in that forum and i hope to find a solution for my trouble
So I installed some apk on my viewpad in order to have the market and to create a google count
But my tablet switch off suddenly and reboot continuely
I found a firware on this site F70_VSAM__ etc and I installed it in recovery mode
but there were a missing file which coundln't be installed : tmp/userdata
I want to tell when I was on recovery mode I made a reset factory but nothing change
Did I eraise all the data on my tablet
The problem is I can't send it to repair because it was rooted with gingerbreak
Have you got some solutions for me ?
I would be very glad to read your post
Thanks so much

I would try to redownload update for and try to update again. Verify file size and or checksum after downloading.
I have not done a factory reset on mine so i can not verify the outcome of a factory reset other than I would bet that all personal data has been removed. Not sure if it effects root.
Also, after you are able to update, you will have to root again using same method.

thanks so much for your answer
but I tried many times and two kind of files and it's the same every time
how could i put a file root and where could i find it ?

Which recovery mode are you in when you try to update? I know that vol up + power on is a different mode than vol down + power on. Have yet to figure what the difference is between the two are.
I have decompressed the update file that i have and there is a userdata.img file in it. Not sure how to tell it to install/update that file.
Mabye you might try different sd card if available.
Also just wondering if it is able to boot, and how far it might get during a normal boot.
Sent from my ADR6300 using XDA

so I used power + up to access the recovery mode and i don't know the difference between the two modes
i decompressed the package and i haven't got the userdata.img file in it and I think that's the trouble
the boot lasts about more than a minute, there are the picture of the birds then after it's written Viewsonic, it's loading for maybe 30s then it reboots
could you give me a copy of your userdata.img i could try to put it on the package
and the link where you find it
thanks so much

I can post up the file but I would not be until tomorrow. I am at work and have all that on my computer at home.

ok I don't mind
I will wait until tomorrow or after
take your time
thanks so much

Try this. I noticed that userdata.img was not in the root of the file but was in fact_recovery.img. Since I can not post that large of a file, and you have extracted the complete update, copy fact_recovery.img to root of sd card. Rename it update.zip and try to get the tablet to install that. With any luck all should go well. The only items in that file are userdata and userstorage, it should not effect any other parts. If you don't have that file let me know and I can post it up somewhere on the web.

i want to thank you so much for your help
yesterday i send a email to the viewsonic's website and today a guy from ups came to take the tablet
so it goes on repair
i hope they could repair it because it was rooted before the trouble
we keep in touch

Sorry for the late !
Hi please se my thread, i had the same problem and i could fix through the recovery and modded update "11252011"

thanks for your answer but I already tried but it didn't work for me
i don't know why i tried to rename in update zip but it was the same problem
wait and see

stephboubou said:
thanks for your answer but I already tried but it didn't work for me
i don't know why i tried to rename in update
zip but it was the same problem
wait and see
Click to expand...
Click to collapse
No really i had the same problem ( original update won't able to fix the loop reboot) but my new modded update is like an hard factory reset (or an format ) I do it for my tablett and fix it

could you give me the link of your thread
i can't find it
thanks so much

http://forum.xda-developers.com/showthread.php?t=1571096 this is the link

Related

How to Root/Recover/Flash Soft Bricked Phone. All-In-One Guide.

I remember when I was looking for all this info I had to jump from board to board to board and
experience tons of trial and error when I was successful with my own device then wounded up
bricking my phone or someone elses based on other factors, or OCLF/CWM not working in recovery,
all that fun stuff.
So I decided to design this guide as a way for a person to make one stop at this guide, and
find everything you need with some tips I had to learn the hardway.
First while YES you can root/flash your phone from 2.2 Froyo official Samsung it is more complicated
and you risk a LOT more. I HIGHLY recommend doing a flash BACK to 2.1 update 1 to make your phone
bone stock to the way it was when you first bought it (Or if you bought it with 2.2 the way it was at launch.
Its a MUCH easier process and almost impossible for something to go wrong in the process. These
steps will help if you have also bricked your phone (Kinda bricked anyways)or its stuck in a bootloop.
Also while rooting is great to apply some Lag Fixes and such there really is no point unless
your going to flash a new ROM (or OS if you're new to this) because you probably don't use your
phone to utilize any of this stuff anyways.
Before you start please be sure to have the drivers working for your phone on your PC.
If you are running Windows 7/Vista and User Account Control (UAC) is enabled, be sure
to right click the Odin icon and select Run as Administrator.
DISCLAIMER:This is my contribution to the wonderful android community here that has given me
a wealth of information on this subject, and had it not been for these boards and others like
it I would not be able to enjoy my phone and the contributions made here by so many hardworking
people. With that said. I AM NOT RESPONSIBLE FOR YOU DAMAGING YOUR PHONE.
1.Back up everything in either Titanium backup or to PC (PC backup can only save Pictures etc.
not your message logs/call logs/account settings/etc.) A Nandroid backup should work equally as
well.
2.Shut Down phone into Download Mode so Odin can recognize phone.
-If phone is in boot loop or bricked:
-Plug USB cable into PC
-Take out battery
-Put battery back in
-Hold Vol Up + Vol Down buttons at same time
-While holding inster USB cable into phone
-Odin should now recognize device in download mode
3.Load Files into proper fields. (.TAR into TAR,.PIT into PIT)
4.Do not check any other boxes then defaults. You only want the PIT file and .TAR files for this.
5.Click Start.
6.Phone should begin flash process
NOTE: EVERYTHING ON YOUR PHONE AT THIS POINT WILL BE ERASED! KERNEL, BASEBAND, ROOT, ETC.
YOUR PHONE WILL BECOME COMPLETELY STOCK AS THOUGH IT WAS JUST PULLED FROM THE SHELF
IN THE UNITED STATES.
7.If process completes the phone will reboot on its own. If it gets stuck in any one process
without moving, just close the program, and repeat steps. Might take a few tries.
Once stock OS of 2.1 Update 1 is applied you can install the update.zip on the SD.
NOTE:YOU DO NOT EXTRACT THE .zip! JUST SIMPLY PLACE IT ONTO THE INTERNAL SD IN NO FOLDER.
If you're running 2.2 froyo and you were just flashed back to 2.1, then you should already have
an update.zip. Thats fine, delete the old one and replace the new one.
1.Now that the update.zip is on your phone the rest is really is. You can root your phone using
this file from your phone. Go into recovery by holding the Vol Up+Vol Down+Power button at the
same time while the phone is off. Let go once the Vibrant logo appears.
2.Select reinstall packages. Phone should reboot and you are now rooted!
If from here you want to flash a ROM over your current OS its simple.
1.When the phone reboots and you see you have SuperUse permissions you are rooted.
2.Go to the market and download ROM manager.
3.Select Install ClockWork Recovery Mod for your specific phone within the ROM manager app.
Find your ROM, Drop it into your SD the same way as the update.zip
4.Shut down your phone and boot back into Recovery Console.
5.Select Reinstall Packages again. This should Install ClockWork (CWM) OVER your recovery console.
If it doesnt take the first time just do it again, it will take you to a different color
console.
6.Once in CWM select the item using the Vol Up or Down buttons and power to select on Install
Zip from SD card.
7.Then pick Choose/Select .zip to Install.
8.Find your ROM, Select it. Select Yes to install.
9.WHAMMY your device is now installing the ROM and you have a flashed and rooted super android phone
on steroids.
Hope this helped.
---Giddy Ninja
FILES
http://files.androidspin.com/downloads.php?dir=androidspin/samsung/vibrant/&file=T959UVJFD.tar<---SGH-T959 JFD Image
http://files.androidspin.com/downloads.php?dir=androidspin/samsung/vibrant/&file=s1_odin_20100512.rar<---512 PIT File
http://files.androidspin.com/downloads.php?dir=androidspin/samsung/vibrant/&file=Odin3.rar<---Odin Application
**References used to build this tutorial when I F**ked up my own device**
http://androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/
http://forum.xda-developers.com/archive/index.php/t-810442.html
http://board.teamwhiskey.com/viewtopic.php?f=29&t=636
http://androidspin.com/2010/08/04/all-about-root-for-the-samsung-vibrant/
http://forum.xda-developers.com/showthread.php?t=849028
http://forum.xda-developers.com/showthread.php?t=991267
http://forum.xda-developers.com/showthread.php?t=732458
Good guide for noobs
Sent from my SGH-T959 using XDA Premium App
Good post I have and will be linking it to some ppl with problems thought you deserved your first thanks lol
Thanks for the responses and any feedback or critique on where/how I can make this guide more accessible is appreciated (PM please)
I wanted this to help people who are new and scared. lol
The guide that s15274n has is like the bible to this. but I know sometimes that much information can be either overwhelming or confusing to some.
So hopefully this helps out some people!
Thanks for the post man. The more ways to help the better. Mine has a ton more detail, but some may not want / need that much.
s15274n said:
Thanks for the post man. The more ways to help the better. Mine has a ton more detail, but some may not want / need that much.
Click to expand...
Click to collapse
And that is EXACTLY what I was hoping to accomplish. Sadly though I didn't stumble across your thread last night when I had soft bricked my brothers phone and was doing a million google searches to find the work around on his boot loop frenzied phone (Recovery console was even corrupt).
So after what seemed like 1000 snipits from different articles I was able to mostly compile this. And then throw in some warnings for future rooters/flashers.
Had I known Samsung's own 2.2 release was going to be so AWFUL compared to 2.1 I never would have upgraded. But then again if I probably never would have flashed/rooted. haha. Oh well what can you do.
update.zip signature verification failed
the update.zip doesnt work in my DEfy
e: signature verification failed
installation aborted.
searching in xda developers i found this thread...
http://forum.xda-developers.com/showthread.php?t=995131&page=4
i dont really understand what is this update.zip for... yours is 600Kb and this one is 140Mb! this file is just to root the mobile right? I am a bit worry about to use this file... maybe i will get a Defy brick... hehe
any suggestion?
thanks a lot
jose
jacortijo said:
the update.zip doesnt work in my DEfy
e: signature verification failed
installation aborted.
searching in xda developers i found this thread...
http://forum.xda-developers.com/showthread.php?t=995131&page=4
i dont really understand what is this update.zip for... yours is 600Kb and this one is 140Mb! this file is just to root the mobile right? I am a bit worry about to use this file... maybe i will get a Defy brick... hehe
any suggestion?
thanks a lot
jose
Click to expand...
Click to collapse
You are in the vibrant forms you need to go to the xda defy fourm.
http://forum.xda-developers.com/forumdisplay.php?f=852
Yea sorry I can't help you out. As stated above this is a Vibrant forum. So don't use that update.zip. Only two things I can tell you are go to the link above, and im sorry you bought a Motorola. Lol.
Sent from my roided out Vibrant.
Sir... i have faced a problem inmy swipe konnect plus smartphone. When i try to power on my phone it automatically goes to recovery mode. Service center says that phone cannot be flash.. so i decide to flash manualy
. Plz help me.. my phone unable to open... how to root my phone .. please help me...

[Q] Need to flash back to stock recovery coby 7022

Hey guys. Got a problem here. My Coby 7022(which I have read that the hardware is known for problems) will not wake up on sleep after a period of time, so im sending it back to get an exchange. My problem is....I could uninstall superuser, but cannot find out(and ive looked everywhere) how to go back to original recovery.If someone would be kind enough to give me their stock recovery dump and explain how to do it, id greatly appreciate it.
Any help would be appreciated as I need this done ASAP
Thanks,
Zacho56
I am going to "try" to help you.
1) you want to remove Superuser...that is easy. we can do it later.
2) you say you want to go back to stock recovery? are you using CWM now? FDWN or fastoot?
I will be around most of the day today. reply back soon
http://forum.xda-developers.com/showpost.php?p=14737017&postcount=34
Download the zip at bottom of post.
move it to your /root directory of your sd card.
make sure you have no other files named"update.zip"(if you do rename it to something else.zip)
change name of downloaded file to "update.zip"
in settings/about phone or about device you should see an option to update. press that. it will install the update.zip to you device.
please report back and let me know if this worked.
more information:
the stock recovery is <3e> your CPU is a telechips tcc8803. I am not sure what you have been using for a search but insted use tcc8803 .
some useful links
http://androtab.info/cyanogenmod/telechips/
http://forum.xda-developers.com/showthread.php?t=1119778
http://kyros-tablet-zone.team-talk.net/forum
every thing I have provided here is what I think you are asking for. I am unable to test files due to not having the 7022. I am mostly know the 7015....so...use them at your own risk. I will keep digging aaround and post any thing else that i think might help.

[Q] SOOOO Much Help Needed!

I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Any pro. expert help you
danaber11 said:
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Click to expand...
Click to collapse
My Suggestion is to take back to the Huawei service centre , might they help you !
Or any expert will help you here and get you out of trouble
danaber11 said:
I find myself with a big problem. I just got a new Huawei Ascend D1 (not quad) and I am having MAJOR issues. My programing friend decided that he was going to root it for me and add the play store to it. He didn't and now now it won't boot. Near as I can tell, he did something to the system file, based on how gapps seems to be installed. Anyway, I can boot to the splash screen and put it in download mode. I can get to the bootloader, but it fails to allow me to flash the factory ROM back....something about a signature failure. I really need help. I have some knowledge of ADB, but seem to be failing. Can anyone help me?
Click to expand...
Click to collapse
I need more detailed description of actions your friend perfomed, and version of your firmware. Also, if you do not afraid of russian language, you can check this thread (to download any attachments, you must be logged in, or it give you 404).
SionGrey said:
I need more detailed description of actions your friend perfomed, and version of your firmware. Also, if you do not afraid of russian language, you can check this thread (to download any attachments, you must be logged in, or it give you 404).
Click to expand...
Click to collapse
I was able to get some info on what Z did. After rooting the phone with Root Bin4ry v18, he copied the contents of the System folder in the gapps package, using es file explorer, into the system folder of the phone. He then restarted the phone and now it goes straight to bootloader and will not flash the ROM. Unfortunately, I could not tell you what firmware was on it other than the latest one. The one bright spot in all of this is that Z made a copy of original system folder. I think I just need to get that back into the system folder on the phone and I should be all set.
danaber11 said:
I was able to get some info on what Z did. After rooting the phone with Root Bin4ry v18, he copied the contents of the System folder in the gapps package, using es file explorer, into the system folder of the phone. He then restarted the phone and now it goes straight to bootloader and will not flash the ROM. Unfortunately, I could not tell you what firmware was on it other than the latest one. The one bright spot in all of this is that Z made a copy of original system folder. I think I just need to get that back into the system folder on the phone and I should be all set.
Click to expand...
Click to collapse
have you try data wipe in recovery ?
if no so check and try wiping :good:
That was the first thing I tried.

[Q] Huawei U8860 Read-only file system

Hello Everyone,
I badly need help on my Huawei Honor U8860 phone. I have recently updated it from 2.3.6 to 4.03 over WIFI and the update went smoothly. So now here is what my phone have:
Kernel Version: 3.0.8-perf-00059-g3a757a2 [email protected] #1
Build Number: U8860IV100R001C00B923SP01
I have not rooted the phone at this time. It was working fine until 2 days ago when I started getting messages on the screen like:
"Unfortunately, 2D Home has stopped"
"Unfortunately, Google Play has stopped"
"Unfortunately, Contacts has stopped"
"Unfortunately, Settings has stopped"
"Unfortunately, Google Play Music has stopped"
"Unfortunately, Browser has stopped"
And so on, and so forth. It seems that all apps and processes have stopped when I try to use them so I literally can't use the phone. I went through several threads here just trying to restore my phone back to a
working state. I tried to do the following in order but without success:
1.) Factory data reset / erase everything - the phone boots to the recovery menu then it formats the /Data, /Cache and /HWUserData then it reboots. After reboot, the phone is back to where it was before the factory data reset with everything in it including downloaded apps.
2.) Manually uninstalled all downloaded apps. Removed screen lock (just to see if phone behavior changes). Then rebooted the phone but after reboot, all the apps are still installed and the screen lock is back as well.
3.) I tried to Force Update with the following official ROMs: B886, B919 and B923 but I always get the message "Update failed" during the update process.
4.) I downloaded the file "recovery-u8860-en.img" so I can replace the "recovery.img" file . Rebooted the phone w/ the pink screen and connected it to my PC but there is no USB mass storage device mounted.
5.) Finally, I tried to root the phone. I enabled USB debugging. I installed the ADB drivers then I downloaded the U8860 root tools and rootexplorer.apk. When I ran the "root-me.cmd", it tried to copy some files to the phone but it failed. The error was "read-only file system".
So it seems that the problem is because of the "read-only filesystem". I does not permit/allow any changes made to the phone. Can you help me restore my phone?
Please.. Can somebody help me on this?
Thanks, clint2rose
clint2rose said:
Please.. Can somebody help me on this?
Thanks, clint2rose
Click to expand...
Click to collapse
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
clint2rose said:
I still did not find any solution for my problem. I read from this thread that all ICS versions can be downgraded.
http://forum.xda-developers.com/showthread.php?t=1552038&page=232
Is there a way to downgrade from B923 to B919? I think this will solve the problem I'm facing.
Click to expand...
Click to collapse
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
kaefert said:
try to back-up some of the data form the partitions that are full on your phone and delete them, maybe afterwards the stock-rom-flashing procedure will work again.
Click to expand...
Click to collapse
thanks for the reply. it did not work. I even formatted the internal SD. Re-run the firmware update but it failed. when i boot the phone, all the contents of the internal SD remains intact. any other suggestion?
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
kaefert said:
I can remember there was some talk of "downgrade patches" to flash before official ROMs if downgrades failed
http://forum.xda-developers.com/showpost.php?p=36819830&postcount=2312
http://forum.xda-developers.com/showpost.php?p=36117718&postcount=2228
http://forum.xda-developers.com/showpost.php?p=35376103&postcount=2104
http://forum.xda-developers.com/showpost.php?p=34105274&postcount=1865
http://forum.xda-developers.com/showthread.php?p=32996711&highlight=patch#post32996711
working download linka (just tested them) -->
https://docs.google.com/file/d/0B4MkDBK_iI-gWEoyaWpEekRXT00/edit
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE5Nzg=
Click to expand...
Click to collapse
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
clint2rose said:
I downloaded the files from both links. Can you tell me how to flash my current ROM? Because when I tried to use the file like a regular ROM (I created dload folder then put UPDATE.APP in the folder, then ran firmware update.. the update failed)..
Click to expand...
Click to collapse
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
kaefert said:
what do you mean by flashing your current ROM? Just like any other stock ROM put the dload folder on the sd-card and start the update procedure either from the settings menu or via the boot-key-combination.
Yes the way you discribed is the correct one for flashing those patches, If those patches also don't work, I'm out of ideas, sorry.
Click to expand...
Click to collapse
Thank you once more for your time. Most of the thread I read regarding these patches often used the phrase" you have to flash the current version of your ROM using the patch"...
And yes I created dload folder, place the UPDATE.APP and put it on the sdcard. I turned off the phone and removed the battery. Then I pressed vol+ vol- and power on/off button. The firmware update went to about 70% installing before displaying update failed.
I guess I will have to bring my phone to a repair center. My only problem is that there is no Huawei service center at my place (I reside here in Saudi Arabia). I got the phone as a free device on a broadband package and the warranty is already expired. I'm a little worried to take the phone to the small mobile repair shops as they might screw up the phone even more. Huawei is not a popular device here unlike iPhone, HTC and Samsung Galaxy.
As I understood that your device is rooted, you should get some custom ROM and try to install it.
okty2k said:
As I understood that your device is rooted, you should get some custom ROM and try to install it.
Click to expand...
Click to collapse
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
clint2rose said:
No, my device is not rooted. I tried to root it but I get the message "failed to copy file: Read-only file system".
Click to expand...
Click to collapse
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
kaefert said:
you don't need to be rooted, you only need to have a custom recovery deployed (which you can either do with root permissions, or by using the pink screen method, but some newer stock roms (you said your on 932 or something? last non-locked working is b919) this has been locked and the device will not boot if the kernel or the recovery image has been manipulated.
I think you will have to find some (huawei-certified!) repair-center, small do-it-all phone-shops probably won't be able to take care of this problem for you.. I'm sorry but I don't see any other solution
Click to expand...
Click to collapse
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
U8860 not responding
clint2rose said:
Ok. I will try to find a repair-center experienced in Huawei devices. I have one last question if you don't mind. Is it possible to erase everything on the phone? As in completely erase or reformat after which there will not be an operating system on the phone. I read in some threads that this is possible w/ custom recovery but I want to know if it is also possible for phones without the custom recovery. I'm hoping there might be some tool or something..
Click to expand...
Click to collapse
Have you find the solution yet? I have the same problem. Somehow my phone system is "locked". I can't install or uninstall app. Some google apps keep showing not responding. Everything changes i made, keep showing up after the phone rebooted.
This was happen a few days after I upgrade to ICS B932SP01 and rooted my phone (to remove original chinese apps).
Luckily i have friend in huawei indonesia. He gave my u8860 to the technical support. But the result was no good.
They try everything, even install my phone with the original GB and always failed.
The last suggestion is change the phone machine, which is as same as buy a new phone.
I really appreciate is someone can help me here...
Thanks

Question Accidently flashed corrupted boot.img to primary section (magisk). Would like some help restoring to stock so can get ROOT again.

Hi,
I flashed a corrupted magisk patched boot.img to my pixel 6. I had removed root via uninstall magisk to update security patch but was unlucky when trying to gain root again.
It asked to factory reset which I thought id try but I think its corrupted aswell.
Right now, I have fastboot available ( but no connection to ABD) when I select "start" is says its got corrupted device and may not work. Then loads bootloader, then goes to white background with google logo and stays there. I cant seems to connect the pixel to adb on my PC here.
If I go to recovery mode I get connection but its saying the device is unauthorized. Ive tried getting access but either cant or dont know how.
I dont have a "TWRP" and it seems its corrupted boot img here too.
My plan was to flash the stock boot.img file to the first section if i could get access but no luck.
As you may see, Im a noob but can follow instuction and have some IT skills.
Ive tried for 12 hrs reading around but need direct help.
Thanks!
update: please ignore this thread as have found a solution. Thank you!
SilvaGi said:
Hi,
I flashed a corrupted magisk patched boot.img to my pixel 6. I had removed root via uninstall magisk to update security patch but was unlucky when trying to gain root again.
It asked to factory reset which I thought id try but I think its corrupted aswell.
Right now, I have fastboot available ( but no connection to ABD) when I select "start" is says its got corrupted device and may not work. Then loads bootloader, then goes to white background with google logo and stays there. I cant seems to connect the pixel to adb on my PC here.
If I go to recovery mode I get connection but its saying the device is unauthorized. Ive tried getting access but either cant or dont know how.
I dont have a "TWRP" and it seems its corrupted boot img here too.
My plan was to flash the stock boot.img file to the first section if i could get access but no luck.
As you may see, Im a noob but can follow instuction and have some IT skills.
Ive tried for 12 hrs reading around but need direct help.
Thanks!
Click to expand...
Click to collapse
Have you tried Android Flash Tool?
SilvaGi said:
update: please ignore this thread as have found a solution. Thank you!
Click to expand...
Click to collapse
Can you please tell people what the solution was so others can benefit from it? Thanks.

Categories

Resources