Related
I just got a g-tab. Its great!
My problem is when I try and download an app, my g-tab is not recognized. The site sees my phone and another tablet I have, but not the g-tab.
I tried to download Google maps, and it says its already installed. It is installed on my cell phone, but not on the g-tab. Same story with other apps. It askes which device I want to download too, but the g-tab is not one of the choices.
The g-tab is as it came out of the box.
Any advice will be appreciated.
Thanks...
A stock gtab doesn't have google market access. I think viewsonic includes a useless "market" app. Your best bet is to use the Amazon marketplace, which can be side loaded.
I didn't spend any time on stock, but I'm certain there is a marketplace hack around here somewhere.
Also any of the available alternate roms will have market access (with the standard market fix).
Go to my site how to section. Link in my signature.
Still Lost
goodintentions said:
Go to my site how to section. Link in my signature.
Click to expand...
Click to collapse
I started at your website about 9:00am. Its now 5:00pm. I got the bluetooth antenna to work, but am unable to get the copilot software to work. I download it for free, but get error messages.
I went back to your website, but am unable to "link in my signature." Sorry, I do not know what that means.
Is it possible to use my cell phone to download it to a sd card. Put the sd card in the gtab and install it that way?
Thanks...
(1) On my website in the How-To page there's a section that tells you how to use the gps.
(2) Co-pilot is not a free app. You have to buy it. You downloaded an illegal version, which gives you errors.
(3) Everything you need to know and to download for turning the gtab into a 10 inch gps is on that How-To page.
(4) Link to my website is in my signature. But just in case, here it is.
(5) There's also instructions to do market fix on the How-To page. The menu in the How-To page to find the various how-to's are on the right hand side.
http://viewsonic-gtablet-for-dummies.webs.com/apps/blog/
Thanks for your help and patience...
goodintentions said:
(1) On my website in the How-To page there's a section that tells you how to use the gps.
(2) Co-pilot is not a free app. You have to buy it. You downloaded an illegal version, which gives you errors.
(3) Everything you need to know and to download for turning the gtab into a 10 inch gps is on that How-To page.
(4) Link to my website is in my signature. But just in case, here it is.
(5) There's also instructions to do market fix on the How-To page. The menu in the How-To page to find the various how-to's are on the right hand side.
http://viewsonic-gtablet-for-dummies.webs.com/apps/blog/
Click to expand...
Click to collapse
Thanks.
Poking around on the ASUS FTP site,
ftp://ftp.asus.com.tw/pub/ASUS/EeePAD/TF201/
ran across this - US_epad-user-8.8.3.29.zip date 12/9/11...
Update firmware you think? I'm assuming it's not ICS, but includes "updater-script" and large "blob" file..
Any clues?
So I got a B&N Nook Tablet for Christmas. My family sent it to me from the States, but after playing around with it, it seems the only way this thing is going to be very useful for me is if I can install my VPN on it. As there's no native way to do this, I have been trying to root it following instructions I found on a blog.
Which led me here. I have managed to restore to 1.4.0 (after going through a couple Micro SD cards), but I can't download and/or install the hidden settings app. At first I couldn't access the multiupload site without a VPN (I guess it's blocked here in China), but I then set up my laptop as a wireless access point in the apartment with connection through the VPN, so I can access the site on my Nook, but maybe it's because the connection is so slow, I cannot download anything to the Nook from that site. It simply won't start downloading.
Is there any way around this???
Have you tried downloading to your laptop and transferring the file by usb to the Nook?
Bill
have you tried the sd card method? check my signature. One package, all files you need are there. Just need to access the internet once.
Sorry, I should have mentioned in the original post that I did try to download it on my PC, load it to a Micro SD card, then put the card on the Nook and try to open it. That didn't work, either. The Nook didn't recognize it as a file type that could be read.
bbs.imp3.net
hi,you can go there and find everything you want in china
Rooting may have issues in china, due to the pollution etc.
straydog13 said:
Sorry, I should have mentioned in the original post that I did try to download it on my PC, load it to a Micro SD card, then put the card on the Nook and try to open it. That didn't work, either. The Nook didn't recognize it as a file type that could be read.
Click to expand...
Click to collapse
This is because the security flaw that allows access to install non-market apps must be accessed through the browser.
Sent from my SCH-I500 using Tapatalk
have you tried changing your DNS addresses i use google DNS 8.8.8.8 8.8.4.4 which have even help to open pages that with normal ISP DNS didn't like game sites that my boyfriend plays lol. There is Open DNS too use the one that works better for you.
~Veronica
edwardxi said:
bbs.imp3.net
hi,you can go there and find everything you want in china
Click to expand...
Click to collapse
Thanks for the link, but I'd rather get this thing working than have to buy some new hardware.
lavero.burgos said:
have you tried changing your DNS addresses i use google DNS 8.8.8.8 8.8.4.4 which have even help to open pages that with normal ISP DNS didn't like game sites that my boyfriend plays lol. There is Open DNS too use the one that works better for you.
~Veronica
Click to expand...
Click to collapse
I don't think there's a way to access and change the DNS address on the Nook without rooting it, which gets back to the original problem...
straydog13 said:
I don't think there's a way to access and change the DNS address on the Nook without rooting it, which gets back to the original problem...
Click to expand...
Click to collapse
It can be done if he changes the DNS directly in the router so all the devices that get connected to that router will automatically use the new DNS addresses
~ Veronica
lavero.burgos said:
It can be done if he changes the DNS directly in the router so all the devices that get connected to that router will automatically use the new DNS addresses
~ Veronica
Click to expand...
Click to collapse
I'm using my laptop as a router and my laptop is on a VPN, so when I connect to the network on the Nook, it's through the VPN, so accessing the site is not the problem. It's just how unbearably slow it is. The download never begins!
Oh, and FWIW, yes, I have been using Google's open DNS...
Can you "download" it from your computer through the browser?
Sent from my SCH-I500 using Tapatalk
Quick question:
- are you rooted? If not, you don't need the hidden apps, you can use appmenu.
Try using your nook browser to download/install appmenu.apk from this link:
http://suipre.com/a68291 - courtesy of spoland from this thread
http://forum.xda-developers.com/showthread.php?t=1353040
- Use your nook browser, type in the url of the app link and after it downloads select the little icon in the lower left corner of your nook and select the apk and select package installer.
Then try rooting w/ this method.
http://forum.xda-developers.com/showthread.php?t=1354487
download the .zip files to your laptop and follow the directions
A nice post. Well, i'm NOT Chinese but right now living in China. I got NOOK Tablet with 1.4.0. As mentioned at the top, its hard to download these apps here in China. These are blocked. and worst thing is that i don't have VPN either. So i have to stuck with available resources. I'm using connectify through my laptop to connect internet with my tablet. However two days ago it stopped and every time when i try to connect, i get the same error DHCP error (Wi-Fi Error 103). I asked one of my lab fellow to root it using local resources and he did it but while exploring it somewhere i pressed some wrong button and it is reset to factory settings. Now it is showing 1.4.1.
I am NOT a geek and specially in China, i am totally helpless without knowing chinese language and without able to access the required stuff from other places. Can someone help me to download these stuff from other place? and can use SD Card to root it by myself without asking chinese friends to help?
i can use limited (within chinese govt. censorship) internet on laptop but certainly now i can't access internet on NOOK Tablet directly. So, can i root it with internet access only on laptop but not directly on tablet? or any way to solve this DHCP issue? as i do used connectify and accessed internet on NOOK Tablet through laptop. Oh and i do bought 32GB (Class 10) SD Card specially for this tablet.
Thanks a lot.
uflibra said:
A nice post. Well, i'm NOT Chinese but right now living in China. I got NOOK Tablet with 1.4.0. As mentioned at the top, its hard to download these apps here in China. These are blocked. and worst thing is that i don't have VPN either. So i have to stuck with available resources. I'm using connectify through my laptop to connect internet with my tablet. However two days ago it stopped and every time when i try to connect, i get the same error DHCP error (Wi-Fi Error 103). I asked one of my lab fellow to root it using local resources and he did it but while exploring it somewhere i pressed some wrong button and it is reset to factory settings. Now it is showing 1.4.1.
I am NOT a geek and specially in China, i am totally helpless without knowing chinese language and without able to access the required stuff from other places. Can someone help me to download these stuff from other place? and can use SD Card to root it by myself without asking chinese friends to help?
i can use limited (within chinese govt. censorship) internet on laptop but certainly now i can't access internet on NOOK Tablet directly. So, can i root it with internet access only on laptop but not directly on tablet? or any way to solve this DHCP issue? as i do used connectify and accessed internet on NOOK Tablet through laptop. Oh and i do bought 32GB (Class 10) SD Card specially for this tablet.
Thanks a lot.
Click to expand...
Click to collapse
-Hello first of all as you got the 1.4.1 update you need to download the acclaim_update.zip to go back to 1.4.0 from AdamOutler's thread in developing section because you just can't root in 1.4.1. The file is hosted XDA so i think you should not have problem downloading it, once you're done the ∩ button won't work so you need to follow these steps in order to bring it to life.
- Once in 1.4.0 next step will be to root by using Indirect's(recommended) or cfoesch's methods for that you just need internet 1 time to download tgps_launcher.apk the rest you do it in your laptop plugged to your nook. If you fall into issues with drivers or anything check my FAQ (link is in my signature)
I will post 2 video links follow them in order:
1. Bypass registration of Nook Tablet by Albert Wertz
2. FREE How To Root Nook Tablet Step by Step by Albert Wertz of Tabletroms
PS: try if possible in the app or your laptop that you share internet to your tablet somewhere to change the DNS addresses to 8.8.8.8 and 8.8.4.4 because you need the tgps_launcher
~ Veronica
Hi Veronica, thanks for detailed reply.
First of all, i solved the issues of my router. so, now i can connect the NOOK Tablet with internet through router. But again, can't access youtube & some other websites (by default). I've also downloaded acclaim_update.zip & downgraded it to 1.4.0. After successful setup, i immediately disconnected/turn off wifi from the device. But further going to root by using Indirect's method, i again need usbdrivers.zip, tgps_lancher.apk and Nook&Zergy.zip which are not accessible inside china. so again i'm stuck here. is there any other alternative place from where i can download these files? or i can provide shared space on my NAS for that and if you can upload there? (with bundle of thanks)...
uflibra said:
Hi Veronica, thanks for detailed reply.
First of all, i solved the issues of my router. so, now i can connect the NOOK Tablet with internet through router. But again, can't access youtube & some other websites (by default). I've also downloaded acclaim_update.zip & downgraded it to 1.4.0. After successful setup, i immediately disconnected/turn off wifi from the device. But further going to root by using Indirect's method, i again need usbdrivers.zip, tgps_lancher.apk and Nook&Zergy.zip which are not accessible inside china. so again i'm stuck here. is there any other alternative place from where i can download these files? or i can provide shared space on my NAS for that and if you can upload there? (with bundle of thanks)...
Click to expand...
Click to collapse
Sure just PM me where you want me to upload them, maybe other servers work have you tried minus.com?, anyway whatever its better for you i can upload the files you need.
~ Veronica
lavero.burgos said:
Sure just PM me where you want me to upload them, maybe other servers work have you tried minus.com?, anyway whatever its better for you i can upload the files you need.
~ Veronica
Click to expand...
Click to collapse
Thanks again.
i have sent u the info regarding uploading...
uflibra said:
Thanks again.
i have sent u the info regarding uploading...
Click to expand...
Click to collapse
Done I uploaded Nook&Zergy.zip, tgps_launcher.apk, unzipme-to-block-OTA.zip and RootME-mod wich is a modified version of Nook&Zergy i created and added other apps, modified build.prop and removed homecatcher. Enjoy.
Will upload latest version of Snowball aswell and maybe is better if share this so other users can use it too?
~ Veronica
Get a torrent file going I think it would be faster.
The KIII I got is now working very well. Hardware is good but the remote control is very week. I use an Air Keyboard anyway (pic below).
My main use is Kodi Video. I use Netflix and Amazon Prime Video too. I sideloaded each of those. The Kodi Version 15.2 installed with the box is 'special' and steers you to pay services and removes and limits some addons. A sideload of Kodi Jarvis 16.x failed and you have to uninstall Kodi 15.2 first. If you want to clone a different box, make an XBMC backup and restore. Were I to do it again, I would likely install SPMC Kodi Forkhttp://spmc.semperpax.com/ You can keep the stock 15.2 and run SPMC at the same time.
I didn't like the launcher and chose Nova Prime. Long press on the left mouse key or menu button will behave like screen press on phone.
Without a recovery or recovery image, I am reluctant to make many changes to /system. If I make a mistake, I don't know how to recover and vendor has not been responsive to pointing me to recovery image.
The Settings App is a pain. I used Quick ShortShortCutMaker https://play.google.com/store/apps/details?id=com.sika524.android.quickshortcut to make shortcut to the AOSP settings app.
I didn't like the unknown to me Supersu installed. I installed a more standard Supersu and then I was able to get to the settings and permissions for Supersu. Were I to do it again, I'd try QuickShortCutMaker to find a shortcut to the installed SuperSu.
Some apps, i.e. Titanium Backup did not fit the screen properly and the overflow menu was not accessible. Menu on remote works. Editing build.prop and putting qemu.hw.mainkeys=0 in the last line solved the menu over flow problems.
You can reboot into stock recovery with ADB over WiFi.
KIII S905 2GB/16GB Android v5.1.1 TV Box from ebay
I bought a KIII S905 2GB/16GB Android v5.1.1 TV Box from ebay also. It is working okay for the most part but I don't like the watered down settings app menus that came installed with it. I too am looking for a backup firmware image that will work on this box should it ever get corrupted and I have to reload from scratch. The specs on this box I have seem impressive for the $67 I paid for it on ebay (from China seller)... but there are no firmware update instructions or availability that I am aware of. It has an online OTA update app but it always times out and says failed to connect to server or some such message. I don't know if there will be future support on future OS updates or not for these boxes... so starting to research other alternative firmwares that can load on these boxes and work just in case of emergency should I ever corrupt the system and have to rebuild from scratch. I am surprised that there is no interest in these KIII boxes on the forums so far. Is it too new to catch on?
Mine has dual Wi-Fi antennas on it and supports 802.11AC Wi-Fi plus has gigabit LAN, 2GB and 16GB RAM and storage, S905 CPU. 4 USB ports, 1 TF card slot. Optical output jack, and all the standard goodies on most boxes. Seems loaded and a good buy for about $67. It is working just fine but trying to find out if these boxes have support from alternative sources.
exists2wonder said:
I bought a KIII S905 2GB/16GB Android v5.1.1 TV Box from ebay also. It is working okay for the most part but I don't like the watered down settings app menus that came installed with it. I too am looking for a backup firmware image that will work on this box should it ever get corrupted and I have to reload from scratch. The specs on this box I have seem impressive for the $67 I paid for it on ebay (from China seller)... but there are no firmware update instructions or availability that I am aware of. It has an online OTA update app but it always times out and says failed to connect to server or some such message. I don't know if there will be future support on future OS updates or not for these boxes... so starting to research other alternative firmwares that can load on these boxes and work just in case of emergency should I ever corrupt the system and have to rebuild from scratch. I am surprised that there is no interest in these KIII boxes on the forums so far. Is it too new to catch on?
Mine has dual Wi-Fi antennas on it and supports 802.11AC Wi-Fi plus has gigabit LAN, 2GB and 16GB RAM and storage, S905 CPU. 4 USB ports, 1 TF card slot. Optical output jack, and all the standard goodies on most boxes. Seems loaded and a good buy for about $67. It is working just fine but trying to find out if these boxes have support from alternative sources.
Click to expand...
Click to collapse
I just wanted to point out that the above previous post was from me, infobits... I don't know why the XDA forums forced me to login with a google account id when trying to use Internet Explorer 11... the XDA forum pages do not display properly on IE11 and are all whacky. They display fine using the new MS Edge browser and Chrome... but not IE11. So I could not logon with my long time member userid of infobits. I wound up logging in as a new member with my Google userid. oh well.
Please help
Thanks for the info.
I got this box 3 days ago and it's been a real pain to deal with.
When I begin to use the box somehow I got plenty of "Unfortunately, Google Play services as stopped" errors. When I say plenty it's like 1 error in every 5 seconds or so.
I tried to update the firmware (that seller gave me) but I'm getting this error:
Code:
"This package is for "p20x" devices; this is a "p20x" ddrsize=".
(Status 7)
I start looking around and I found out that my build.prop in system directory doesn't have this getprop("ro.platform.ddrsize") == "2G" that the "updater-script" file in the firmware requires.
What should I do?
Thanks in advance!
exists2wonder said:
I bought a KIII S905 2GB/16GB Android v5.1.1 TV Box from ebay also. It is working okay for the most part but I don't like the watered down settings app menus that came installed with it. I too am looking for a backup firmware image that will work on this box should it ever get corrupted and I have to reload from scratch. The specs on this box I have seem impressive for the $67 I paid for it on ebay (from China seller)... but there are no firmware update instructions or availability that I am aware of. It has an online OTA update app but it always times out and says failed to connect to server or some such message. I don't know if there will be future support on future OS updates or not for these boxes... so starting to research other alternative firmwares that can load on these boxes and work just in case of emergency should I ever corrupt the system and have to rebuild from scratch. I am surprised that there is no interest in these KIII boxes on the forums so far. Is it too new to catch on?
Mine has dual Wi-Fi antennas on it and supports 802.11AC Wi-Fi plus has gigabit LAN, 2GB and 16GB RAM and storage, S905 CPU. 4 USB ports, 1 TF card slot. Optical output jack, and all the standard goodies on most boxes. Seems loaded and a good buy for about $67. It is working just fine but trying to find out if these boxes have support from alternative sources.
Click to expand...
Click to collapse
There appears to be several manufacturers of this KIII S905 TV Box. I found at least three of them listed in their corresponding websites: Acemax, Venztech and Videostrong. When inquired, each claimed they are the OEM. I hope they have similar board design (but perhaps with different eMMC and RAM chip manufacturers). I hope to receive my KIII soon and when I do, I will try to open and examine the board and post the hardware info here.
You can download stock firmware for Acemax KIII: http://chinagadgetsreviews.com/down...-1-1-stock-firmware-acemax-kiii-tv-box-2.html. One OEM sent me the link to the latest firmware but I have not been successful in downloading it as the instructions are in Chinese and it kept getting aborted from download errors.
Kraka said:
There appears to be several manufacturers of this KIII S905 TV Box. I found at least three of them listed in their corresponding websites: Acemax, Venztech and Videostrong. When inquired, each claimed they are the OEM. I expect they have identical design but perhaps with different eMMC and DDR3 DRAM chip manufacturers. I haven't yet received my KIII, but when I do, I will try to open and examine the board and post the hardware info here.
You can download stock firmware for KIII from Acemax from China Gadget Review: http://chinagadgetsreviews.com/down...-1-stock-firmware-for-acemax-kiii-tv-box.html. One OEM sent me the link to the latest firmware but I have not been successful in downloading it the instructions are in Chinese and it kept getting aborted from download errors.
Click to expand...
Click to collapse
Hi, I was able to download the firmware file using FireFox browser. I first tried to download it using IE11 but it failed near the end saying the file was too large and to try using another browser like Chrome or FireFox. FireFox worked for me. And I don't see any Chinese language instructions... it was all in English. So you may want to try the download again. I am saving this firmware in case I ever corrupt my KIII box and will only try to load it then. I am just saving it as a backup measure for now. So I don't know if it will load on my no-name KIII box successfully or not at this time as I am not trying it.
Infobits said:
Hi, I was able to download the firmware file using FireFox browser. I first tried to download it using IE11 but it failed near the end saying the file was too large and to try using another browser like Chrome or FireFox. FireFox worked for me. And I don't see any Chinese language instructions... it was all in English. So you may want to try the download again. I am saving this firmware in case I ever corrupt my KIII box and will only try to load it then. I am just saving it as a backup measure for now. So I don't know if it will load on my no-name KIII box successfully or not at this time as I am not trying it.
Click to expand...
Click to collapse
Sorry, I was in the process of updating the link to the latest KIII-ota-20160317.164729.V1031P2.zip firmware when I saw your post. In case you didn't catch it, you can try the updated link to get the March 17 2016 version. Yes, I did download both versions from the link I posted. As for the Chinese language instructions site, it wasn't from the same OEM. It was from another manufacturer whom I had requested and had in turn gave me a link to some Chinese cloud storage place. I think the one from Acemax should be ok as it is for the same KIII S905 with 2G/16G and 802.11ac wifi.
Have you been able to save the nandroid and flash the latest fw?
Kraka said:
Sorry, I was in the process of updating the link to the latest KIII-ota-20160317.164729.V1031P2.zip firmware when I saw your post. In case you didn't catch it, you can try the updated link to get the March 17 2016 version. Yes, I did download both versions from the link I posted. As for the Chinese language instructions site, it wasn't from the same OEM. It was from another manufacturer whom I had requested and had in turn gave me a link to some Chinese cloud storage place. I think the one from Acemax should be ok as it is for the same KIII S905 with 2G/16G and 802.11ac wifi.
Have you been able to save the nandroid and flash the latest fw?
Click to expand...
Click to collapse
No, I have not done anything to load the firmware I downloaded as I don't need to at this time.
What link are you talking about for the latest KIII-ota-20160317.164729.V1031P2.zip firmware? I don't see any link to download it.
I just searched for it and got it from here:
http://chinagadgetsreviews.com/down...-1-1-stock-firmware-acemax-kiii-tv-box-2.html
I am not sure if we can trust these downloads... I looked at the contents of the .zip files and all the files seem to be dated from year 2008. That does not seem to jive with being the latest Android version files now does it?
Infobits said:
No, I have not done anything to load the firmware I downloaded as I don't need to at this time.
What link are you talking about for the latest KIII-ota-20160317.164729.V1031P2.zip firmware? I don't see any link to download it.
I just searched for it and got it from here:
http://chinagadgetsreviews.com/down...-1-1-stock-firmware-acemax-kiii-tv-box-2.html
I am not sure if we can trust these downloads... I looked at the contents of the .zip files and all the files seem to be dated from year 2008. That does not seem to jive with being the latest Android version files now does it?
Click to expand...
Click to collapse
Yup, that's the same one I put in edited post #5. Perhaps I should have created a new one instead of just editing it.
You're right, the files are dated 2008, but one of the files contain reference to 20160317 (March 17, 2016). Also it's signed so I'm sure it's legit.
BTW are you also experiencing the same Google Play has stopped issue reported by @Polido-PT?
Kraka said:
Yup, that's the same one I put in edited post #5. Perhaps I should have created a new one instead of just editing it.
You're right, the files are dated 2008, but one of the files contain reference to 20160317 (March 17, 2016). Also it's signed so I'm sure it's legit.
BTW are you also experiencing the same Google Play has stopped issue reported by @Polido-PT?
Click to expand...
Click to collapse
No, I have not experienced the Google Play has stopped on my KIII. However, I cannot navigate the Google Play store using the provided KIII remote control buttons. I have to use an external USB wireless keyboard with touchpad or air-mouse in order to move around and select things. That's the only issue I have with that. I have not tried downloading many apps using the play store though so I don't know if it might one day stop on me also.
I run Plex, Kodi 16.0, Amazon Prime Video, SiriusXM Radio apps on mine just fine. Some of the apps require the use of the external USB keyboard to navigate. So having a USB keyboard with touch-pad or air-mouse is a requirement for some apps.
BTW, my KIII seems to be rooted already out of the box as provided. I don't know if all KIII's come rooted or not but figure its worth mentioning it.
I am disappointed that the performance on the 5GHz network is very poor. Speedtest only achieved 3 to 4 Mbps compared to 33 Mbps on the 24GHz network, the same speed as via ethernet and on my PC on the same 5GHz network, essentially my ISP subscription speed. Is anyone else experiencing the same issue?
If you are looking for a TWRP recovery for KIII, try Abdul's TWRP 3.0.2 http://www.freak-tab.de/abdul_pt/aml/TW3_KIII_.img.
Today I decided to replace the original factory recovery on my KIII. What I did was:
1. Copy the recovery file to the root directory of a PC formatted FAT32 uSD card, at least 16GB so it can hold a full nandroid backup.
2. Rename it to recovery.img and it must be in the root directory. The card may contain other folders and files.
3. Hold the reset button using a paper clip thru a tiny hole at the bottom of the device then plug the power in.
4. Wait until the S905 logo appears before releasing the reset.
5. Within several seconds, you should see the TWRP 3.0.2.
6. You can use it to wipe or flash from the external SDcard while preserving the original recovery, or replace the factory recovery with TWRP's recovery.img file.
I had successfully performed full nandroid backup with this TWRP and I can confirm that the restore function works. Next step to test is to do a wipe and perform a clean install.
---------- Post added at 10:53 PM ---------- Previous post was at 10:45 PM ----------
Polido-PT said:
Thanks for the info.
I got this box 3 days ago and it's been a real pain to deal with.
When I begin to use the box somehow I got plenty of "Unfortunately, Google Play services as stopped" errors. When I say plenty it's like 1 error in every 5 seconds or so.
I tried to update the firmware (that seller gave me) but I'm getting this error:
Code:
"This package is for "p20x" devices; this is a "p20x" ddrsize=".
(Status 7)
I start looking around and I found out that my build.prop in system directory doesn't have this getprop("ro.platform.ddrsize") == "2G" that the "updater-script" file in the firmware requires.
What should I do?
Thanks in advance!
Click to expand...
Click to collapse
Try creating a bootable microSD card using the Amlogic BootcardMaker http://chinagadgetsreviews.com/how-...-bootable-magic-micro-sd-card-in-minutes.html and flash the firmware with it.
Look Inside!
I don't know if anyone has opened theirs up and looked inside and found what I have but when I did I found only 1 of the 2 antennas hooked up, or with a cable for that matter.
mthomp9561 said:
I don't know if anyone has opened theirs up and looked inside and found what I have but when I did I found only 1 of the 2 antennas hooked up, or with a cable for that matter.
Click to expand...
Click to collapse
Yes all theses KIII box's have only one antenna wired up & working its a real shame It seems the other is just there for looks.
blinkone said:
Yes all theses KIII box's have only one antenna wired up & working its a real shame It seems the other is just there for looks.
Click to expand...
Click to collapse
Probably they initially designed it to use a WiFi chip that supports dual antenna, but then decided to go with a cheaper chip and put a dummy antenna since the plastic case mold has already been released, to beat time-to-market deadline.
One of the reasons I bought KIII was the dual band 802.11ac WiFi, but alas I got only 4 Mbps out of the 5GHz band! The box was practically next to my router, so it's not an antenna issue. I hope there'll be a firmware fix soon. Anyone else got the same issue?
USB HDD
Hello!
I use KIII tv box as a torrentbox with ttorrent app.
Also have the servers ultimate app running with a ddns update and local network ftp servers.
Problem is that the usb hdd i attached is getting unmounted after a day...
Is has no seperate power suply cable, only connetsc to the box's usb port with a data cable.
Is there any option to kill this automatic unmont?
mount files from local NAS using CIFS
It would be great to be able to mount network shares to the local file system using CIFS with the KIII . It would basically give your device unlimited storage capacity while connected to your home network.
Has anybody try to mount network shares to the local file system using CIFS with the KIII??
Does the Kernel support CIFs??
Thank you in advance
David
I just received this box, I usually like to download torrents while watching youtube or kodi. The problem I have with this box is it closes my torrent app as soon as I leave it to go to another app.
I went into developer settings and unchecked "kill apps",but it still kills the app when I switch to another.
Is there a setting I'm missing or is this standard of the KIII tv box?
Sent from my SM-G935V using XDA-Developers mobile app
kiii : stops video playback
Hello. I also have just got a kiii box.
I met troubles. The video playback stops after few minutes. This is true for xbmc and MX player....
The firmware is a kernel version built on 2016 mars 17th.
I requested an updated version but seems not easy....
Any idea?
Regards
Hello is there someone succeed to install xbmc 16.1.
Regards
---------- Post added at 07:10 AM ---------- Previous post was at 06:29 AM ----------
Infobits said:
No, I have not experienced the Google Play has stopped on my KIII. However, I cannot navigate the Google Play store using the provided KIII remote control buttons. I have to use an external USB wireless keyboard with touchpad or air-mouse in order to move around and select things. That's the only issue I have with that. I have not tried downloading many apps using the play store though so I don't know if it might one day stop on me also.
I run Plex, Kodi 16.0, Amazon Prime Video, SiriusXM Radio apps on mine just fine. Some of the apps require the use of the external USB keyboard to navigate. So having a USB keyboard with touch-pad or air-mouse is a requirement for some apps.
BTW, my KIII seems to be rooted already out of the box as provided. I don't know if all KIII's come rooted or not but figure its worth mentioning it.
Click to expand...
Click to collapse
Hello infobit.
It seems that you are using xbmc 16.1. To do it, I had to uninstall first xbmc and then install the new version. Now, but I don't know if it is the consequence or not, the video play back stops after few minutes (15 minutes). Do you meet similar problems?
Regards.
Infobits said:
my KIII seems to be rooted already out of the box as provided. I don't know if all KIII's come rooted or not but figure its worth mentioning it.
Click to expand...
Click to collapse
Both the KII and KIII have a "compromised" SUD that will grant root permissions to any app that requests them.