I'm trying to find a way to use my Iphone 4 data plan (3G) on my Samsung Galaxy Tab 10.1 (Wi-Fi Only) through the USB cable/adapter but no luck so far.
I'm currently using the ROM Task Rom 9.0 on the tablet so Ad-Hoc is enable and I've been able to tether to the Iphone through Wi-Fi, however it drains my phone's battery pretty quickly.
I do have the Samsung USB adapter but when the Iphone is connected to the GT it only allows me to copy photos. It doesn't recognize the USB tethering.
Does anyone have any tip or advise???
I guess the same procedure could be applied to any cellphone regardless of the OS.
What app are you using on your iPhone?
delanera said:
I'm trying to find a way to use my Iphone 4 data plan (3G) on my Samsung Galaxy Tab 10.1 (Wi-Fi Only) through the USB cable/adapter but no luck so far.
I'm currently using the ROM Task Rom 9.0 on the tablet so Ad-Hoc is enable and I've been able to tether to the Iphone through Wi-Fi, however it drains my phone's battery pretty quickly.
I do have the Samsung USB adapter but when the Iphone is connected to the GT it only allows me to copy photos. It doesn't recognize the USB tethering.
Does anyone have any tip or advise???
I guess the same procedure could be applied to any cellphone regardless of the OS.
Click to expand...
Click to collapse
Usb tethering is not supported on the tab.
Sent from my GT-P7510 using Tapatalk
how about wifi hotspot through my sensation? havent tried it yet so i dont know.
ladybeefcake
who can help me with usb charging to enable with galaxy task 13.1 slim.
It is not working , have Gscript running with Superuser on.
I can not charge on usb off the laptop my Galaxy Tab 10.1 with galaxy task 13.1 slim
ladybeefcake said:
who can help me with usb charging to enable with galaxy task 13.1 slim.
It is not working , have Gscript running with Superuser on.
I can not charge on usb off the laptop my Galaxy Tab 10.1 with galaxy task 13.1 slim
Click to expand...
Click to collapse
You need the right kernel... .
---------- Post added at 04:07 PM ---------- Previous post was at 04:03 PM ----------
tony yayo said:
how about wifi hotspot through my sensation? havent tried it yet so i dont know.
Click to expand...
Click to collapse
Not that I am endorsing you tether your phone without a data plan set up for it.... but I've heard Open Garden works great - so long as your Sensation is rooted.
hey i figure its data i would be using on my phone anyway, just on a bigger screen.
Related
Hello everyone,
I have a samsung Galaxy tab 10.1! But the wifi versie.
If in buy a usb adapter from samsung and a internet usb stick from t–mobile (or whatever)
Will it work on my tablet?
Best regards,
Fariz Asruf
Edit: it willen not work i read, cause there is no driver for it. Is it treu?
No. You can't use usbmodems
Yes i read it.
Is have a rooted désiré HD i will thethering.
I'm going to a part of Japan where there's more wired internet than wireless.
Can I connect my Galaxy S3 straight to wired internet? I have an OTG USB cable with which the S3 works fine with hubs, mice, keyboards and storage. I have a Hawking USB to wired ethernet (RJ45) adapter. When I plug it all together the adapter lights up green but nothing happens. Is this a software/driver issue and is there an app which overcomes it?
I'm NOT interested in lugging a netbook with me, or any stuff about tethering, or expensive 3G. I will take my Netgear wireless travel router WGR101 "hotspot" if I have to.
Mainly I just want to connect the S3 to an ethernet cable.
Thank you.
Mod
There might be a mod out there, i know the transformer tablets support this, but it will be intresting to find out...
My tablet connects to wired internet first time using its OTG connector and the Hawking USB/RJ45 adapter. It's a 7" Eken MB702C using Allwinner Tech Boxchip ARM Cortex™-A8 1.2GHz and running Android 2.3.4. If it can do it, why can't an S3? Is it hardware or drivers and rom? Thanks.
Have you tried using the usb tethering option?
It's purely drivers. USB-OTG has backward-compatibility to standard USB2.0 so it can use any USB-device it can provide enough juice for.
However the kernel has to recognize the USB device and load/activate the corresponding drivers. Then the uerland scripts configuring the (DHCP) IP-address and other settings have to kick in.
Of course ur right d4fseeker, but now what drivers to install? My kernel is 3.0.15 and I really want the eth0 (ethernet interface from cable) in backtrack 5 on my phone... so what can I do??? I have a usb OTG connector that works perfectly with mouses and joysticks but that isnt working with any of my two ethernet to usb (the ethernet to usb shows a light but on the s3 it doesnt show anything because the kernel doesnt recognize it) How to enable the recognition of the ethernet by the kernel ? WHAT DRIVERS?! Thank you.
PS: Does anyone know how to enable monitor mode on samsung galaxy s3 ive seen this post :
bcmon.blogspot.com.au/2012/09/working-monitor-mode-on-nexus-one.html?m=1
but it didnt work for s3 ...
Sent from my GT-I9300 using xda premium
Please answer...
Sent from my GT-I9300 using xda premium
you could use the command-line dmesg in Backtrack to show which module is loaded
it's hard to find and explain it on a forum but if you've got skype et al we could try it live
Sent from my GT-I9300 using xda premium
Are you answering to the first or to the second question ? Im sorry but im lost my main vocation is cracking, not programming...
Sent from my GT-I9300 using xda premium
Take a look at the SiyahKernel (www.gokhanmoral.com). It allows you to add additional drivers to the kernel, if it has not already.
the problem is finding the proper driver and build it to specs.
Of course, thanks for the link
Sent from my GT-I9300 using xda premium
I wish someone will create a .ko file to insmod on the kernel 3.0.15 of my s3... a ko file that enables the ethernet... who can build it?
Sent from my GT-I9300 using xda premium
d4fseeker said:
you could use the command-line dmesg in Backtrack to show which module is loaded
it's hard to find and explain it on a forum but if you've got skype et al we could try it live
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I want to do it on my S3, I am from India & want to connect my office Ethernet Cable to it to access my office site.
Can we do it thru skype, will you pls help me in this regard
my Kernel version is : 3.0.31 - 488302
I'm keen to see this progress too - but i wouldnt know where to start with compiling it into the kernel or inserting the mods. The drivers are present in the tablet builds - for example I have it working on the nexus 7 - so porting shouldnt be too hard. Just hope that one of the kernel dev teams has the time and interest to look at this......
gingerneil said:
I'm keen to see this progress too - but i wouldnt know where to start with compiling it into the kernel or inserting the mods. The drivers are present in the tablet builds - for example I have it working on the nexus 7 - so porting shouldnt be too hard. Just hope that one of the kernel dev teams has the time and interest to look at this......
Click to expand...
Click to collapse
Yes exactly..
kingofcracking said:
Yes exactly..
Click to expand...
Click to collapse
Any kernel devs out there willing to give this a go and compile the common android tablet Ethernet drivers into an S3 kernel?
gingerneil said:
Any kernel devs out there willing to give this a go and compile the common android tablet Ethernet drivers into an S3 kernel?
Click to expand...
Click to collapse
Yeah
You can buy an adapter on eBay, it is about the size of a pack of cards / cigarette pack. Plug the ethernet cable from the hotel into the unit and it then makes the adapter a wireless access point. I bought one about a year ago for exactly a similar reason - traveling to hotels where there is only wireless in the lobby, not the rooms. Unit cost be £15 / $22 - the link in my eBay account has now expired, but search away on eBay.
Jeff
Here is a similar device - even cheaper than I paid - on eBay UK.
Item number: 200795424968
jthspace said:
You can buy an adapter on eBay, it is about the size of a pack of cards / cigarette pack. Plug the ethernet cable from the hotel into the unit and it then makes the adapter a wireless access point. I bought one about a year ago for exactly a similar reason - traveling to hotels where there is only wireless in the lobby, not the rooms. Unit cost be £15 / $22 - the link in my eBay account has now expired, but search away on eBay.
Jeff
Here is a similar device - even cheaper than I paid - on eBay UK.
Item number: 200795424968
Click to expand...
Click to collapse
Thanks for the reply, but I want to be able to use Ethernet directly to my s3 for speed and reliability when streaming and transferring large files.
gingerneil said:
Thanks for the reply, but I want to be able to use Ethernet directly to my s3 for speed and reliability when streaming and transferring large files.
Click to expand...
Click to collapse
any updates? i am interested too in wired ethernet for the s3...
Is it possible to connect 3g data-cards in tab 2 7.0 wi-fi tablets @ stock rom !
i tried but the tab is not detecting !!
Ppp widget but need to be rooted etc and a few other things
AND it's not guaranteed to work
https://play.google.com/store/apps/details?id=de.draisberghof.pppwidget
Sent from my C6603 using Tapatalk 2
New possible working 3g dongle
Maybe i have good news, but i need someone to help me.
I found this 3g usb dongle
http://www.benchmark.pl/aktualnosci/modecom-freenet-mc-3ghs21-modem-3g-kompatybilny-aero2-cena.html (trasnlate to english)
http://www.amazon.de/dp/B00DN1D6DQ
and it has build in drivers for android 4! So, is it possible to work for our Samsung galaxy tab 2? Any ideas?
This is an article for this 3g dongle
http://www.elitek.be/elitek/product_info.php?products_id=42501
3g USB Dongle
Kill_bill said:
Maybe i have good news, but i need someone to help me.
I found this 3g usb dongle
http://www.benchmark.pl/aktualnosci/modecom-freenet-mc-3ghs21-modem-3g-kompatybilny-aero2-cena.html (trasnlate to english)
http://www.amazon.de/dp/B00DN1D6DQ
and it has build in drivers for android 4! So, is it possible to work for our Samsung galaxy tab 2? Any ideas?
This is an article for this 3g dongle
http://www.elitek.be/elitek/product_info.php?products_id=42501
Click to expand...
Click to collapse
wote about it in this thread using ppp_widget:
http://forum.xda-developers.com/showthread.php?p=44107687&postcount=42
Hi
Hi
I install the ppp widget but I can't connect the tablet (P3110) in the internet via usb
The usb stick blinks a blue light
HELP
Hi all,
Just received my Nexus 9, it got updated to stock Android 5.0.1.
Unfortunately, Ethernet isn't working via USB OTG cable. Does anyone know how to enable it or do I have to install CyanogenMod for Ethernet support?
Thanks!
temuri said:
Hi all,
Just received my Nexus 9, it got updated to stock Android 5.0.1.
Unfortunately, Ethernet isn't working via USB OTG cable. Does anyone know how to enable it or do I have to install CyanogenMod for Ethernet support?
Thanks!
Click to expand...
Click to collapse
has this ever been possible? i have never heard of any android device being able to accept internet though an OTG and usb\ethernet adapter...
Not sure about stock Android, but CyanogenMod 4.4.4 works on Ethernet via OTG on my Nexus 7.
https://play.google.com/store/apps/details?id=xda.usbhost.test
That should work. My Ethernet adapter is being used on my nexus player or I would test for you.
Does it have linux driver?
zawata said:
has this ever been possible? i have never heard of any android device being able to accept internet though an OTG and usb\ethernet adapter...
Click to expand...
Click to collapse
I've not tried the script, but it's been reported to work elsewhere, also. It doesn't "just work" on my rooted stock N5 with KK. It does, however, work on my rooted stock N7 FHD (L 5.0.1)--"just works." I have the BobjGear Ethernet Adapter for Android that I purchased years ago for my former Toshiba Thrive. The OTG is run-of-the mill Amazon Asian import variety. It worked on my Nexus 7 2012.
I just tried it on my old Galaxy Nexus, and it also "just works." It may have worked on the N4, but I gave it to my son so can't test it.
I would think that it'd be possible... I have a 1Gb/s connection at my house so whenn I have a large file such as an HD movie I need to download right before I go somewhere I plug my Micro USB-to-USB into my Cisco USB 3.0-to-Gig Ethernet and then into my Nexus 7 (2013), running stock 5.0 FYI. I then turn WiFi off, then wait about 20 seconds. Although it does not show that you are connected via Ethernet you are. I ran a simple speed test using Ookla.
With WiFi I was getting up to about 80Mb/s, with my Ethernet setup I was getting around +900Mb/s.
lukkypuggy said:
I would think that it'd be possible... I have a 1Gb/s connection at my house so whenn I have a large file such as an HD movie I need to download right before I go somewhere I plug my Micro USB-to-USB into my Cisco USB 3.0-to-Gig Ethernet and then into my Nexus 7 (2013), running stock 5.0 FYI. I then turn WiFi off, then wait about 20 seconds. Although it does not show that you are connected via Ethernet you are. I ran a simple speed test using Ookla.
With WiFi I was getting up to about 80Mb/s, with my Ethernet setup I was getting around +900Mb/s.
Click to expand...
Click to collapse
How is 900 meg even possible? Nexus 7 only supports USB 2.0. Even with a gigabit connection, you should not get faster than 480 Mbps.
androidvillage said:
Does it have linux driver?
Click to expand...
Click to collapse
H
Nop it uses the Ethernet driver in the kernel
---------- Post added at 09:56 PM ---------- Previous post was at 09:53 PM ----------
Boblank said:
https://play.google.com/store/apps/details?id=xda.usbhost.test
That should work. My Ethernet adapter is being used on my nexus player or I would test for you.
Click to expand...
Click to collapse
This app won't work on our nexus 9
Because of 64bit
And
Tasker did not fix the root bug on 64bit
Go here for the script to enable it
http://forum.xda-developers.com/showthread.php?t=2703977
---------- Post added at 09:57 PM ---------- Previous post was at 09:56 PM ----------
zawata said:
has this ever been possible? i have never heard of any android device being able to accept internet though an OTG and usb\ethernet adapter...
Click to expand...
Click to collapse
Now you know its possible
Hehe
Hi there! Just wanted to chime in to note that USB Ethernet works fine on Android 5.0 running on an unmodified Nexus 9. I'm actually sending this through the Ethernet connection I yet have to update to 5.0.1 though and see if it works there as well :fingers-crossed:
Hi together,
I am using a Nexus 9 with Simple AOSP (Android 5.1.1).
For using my ethernet connection I bought this adapter: DONZO® micro USB 2.0 A Stecker auf RJ45 Ethernet Adapter 10/100 Mbit.
When I plug it into the tablet it begins to light up. So I think the tablet recognizes the adapter. (When plugging it into my Nexus 4 it does not light up.)
Now my problem: Nothing happens... If I disable Wifi I get no connection with Chrome.
When looking into netcfg i don't see an eth0 interface.
Also the app "Ethernet" from xda (USBhost) does not work, unfortunatelly... (Nor it works with any of the scripts provided here at xda.)
Anyone knows what could be the problem?
I'd really like to use the tablet with ethernet instead of Wifi at the moment.
Thanks!
Works for me on 5.1.1, unrooted Nexus 9
Possible of interest, I have an UNROOTED Nexus 9, using the factory 5.1.1 image, and I just plugged in an OTA cable, plugged a USB to Ethernet adapter into it, turned off my Wi-Fi, and still have connectivity.
Thus, my tiny little corner of the world is currently a VERY happy place. Thought I'd share my joyousness around the forum.
Which adapter ?
mikecole79 said:
Possible of interest, I have an UNROOTED Nexus 9, using the factory 5.1.1 image, and I just plugged in an OTA cable, plugged a USB to Ethernet adapter into it, turned off my Wi-Fi, and still have connectivity.
Thus, my tiny little corner of the world is currently a VERY happy place. Thought I'd share my joyousness around the forum.
Click to expand...
Click to collapse
Hello Mikecole,
I have a nexus 9 with android 5.1.1 as well
I am looking for the right ethernet adapter to buy, and I am thinking of the bobjgear usb 2.0
Could you please tell me which adapter you are using ?
Thank you
Cheers
Hello,
Is it possible to use a USB to Ethernet adapter on the Galaxy View, such as the ET-UP900 from Samsung?
Thank you in advance.
amundsen said:
Hello,
Is it possible to use a USB to Ethernet adapter on the Galaxy View, such as the ET-UP900 from Samsung?
Thank you in advance.
Click to expand...
Click to collapse
maybe this help http://www.bobjgear.com/which-tablets-support-ethernet.html you can also try this https://goo.gl/i2gvSN for for 14$ instead of ET-UP900 is like 67$
---------- Post added at 07:51 PM ---------- Previous post was at 07:36 PM ----------
Thanks for the information, but the question was not about existing products (which I knew actually) but whether the Galaxy View can use them successfully. According to one answer on Amazon.com about the Samsung model, it seems to work. So I have ordered it.
Hi, i ve just bought it and it doesn't work. i ve got bobjgear adaptator... I m so disapointed.
elphilb said:
Hi, i ve just bought it and it doesn't work. i ve got bobjgear adaptator... I m so disapointed.
Click to expand...
Click to collapse
I got the Samsung Original LAN USB HUB Adapter (ET-UP900) for Galaxy Note Pro /Tab Pro and it works fine.
I also have a keyboard and mouse working via the 2 USB ports provided. Looks like USB devices that demand more power than the View can provide can also be charged separately over a USB3 connector - very good adapter.
Does it work?
Does the Samsung LAN/USB hub (model ET-UP900) that you bought work for the Samsung Galaxy View 18.4" big tablet (SM-T670)?? How do you set it up on the 18.4" tablet?? Thanks.
---------- Post added at 02:08 AM ---------- Previous post was at 02:07 AM ----------
Does the Samsung LAN/USB hub (model ET-UP900) that you bought work for the Samsung Galaxy View 18.4" big tablet (SM-T670)?? How do you set it up on the 18.4" tablet?? Thanks.
Yes it works, just plug it in and it works. Typing this from a Galaxy view with Mac keyboard attached (brightness, media transport, volume function keys work, numpad numbers don't work, but arithmetic keys work), mouse attached (scroll wheel works), and ethernet all attached to ET-UP900.
paulinelam95 said:
Does the Samsung LAN/USB hub (model ET-UP900) that you bought work for the Samsung Galaxy View 18.4" big tablet (SM-T670)?? How do you set it up on the 18.4" tablet?? Thanks.
---------- Post added at 02:08 AM ---------- Previous post was at 02:07 AM ----------
Does the Samsung LAN/USB hub (model ET-UP900) that you bought work for the Samsung Galaxy View 18.4" big tablet (SM-T670)?? How do you set it up on the 18.4" tablet?? Thanks.
Click to expand...
Click to collapse
Galaxy View
My friend, thank you so much for letting me know. :highfive: Do you think Samsung will provide Galaxy View with an update to Android Marshmallow 6.0 ? I bought a Samsung stylus (from this site
fonejoy.com/genuine-samsung-t365-galaxy-tab-active-stylus-pen-gh98-34603a.html ) with the intention of using it on the Galaxy View. However, it doesn't work on Galaxy View. It's mind boggling because this stylus comes with the Samsung Galaxy Tab Active and is supposedly an ordinary capacitive stylus (source: sammobile.com/2014/09/25/samsung-galaxy-tab-active-hands-on ) . Does a capacitive stylus work on the Galaxy View???
I really hope they will update to Android 6.0. I bought it when it was reduced in price because I had an Amazon gift card, and the Lenovo PB2-690N that is same size was announced but not available yet. I hope that when it is out Samsung will finally release a 6.0 update.
A capacitive stylus really should work with this touchscreen.
Galaxy View 18.4 & Marshmallow
Yeah, that galaxy tab active stylus pen gh98-34603a doesn't work for View. Do you know of a way to make it work? Sigh. Blew quite a lot of money on a useless stylus. I sure hope Samsung gives Android 6.0 to the View. Is your View buggy due to the Android 5 Lollipop? Mine doesn't work well.
kcoul said:
I got the Samsung Original LAN USB HUB Adapter (ET-UP900) for Galaxy Note Pro /Tab Pro and it works fine.
I also have a keyboard and mouse working via the 2 USB ports provided. Looks like USB devices that demand more power than the View can provide can also be charged separately over a USB3 connector - very good adapter.
Click to expand...
Click to collapse
Hi,
because of this statement I brought the ET-UP900 Lan USB Hub Adapter, but it doesn't work on my Samsung Galaxy View device.
Did you Configured something or just Plug an play?
What are you trying to plug in? It might be the hub is working but your device is not.
puni**** said:
Hi,
because of this statement I brought the ET-UP900 Lan USB Hub Adapter, but it doesn't work on my Samsung Galaxy View device.
Did you Configured something or just Plug an play?
Click to expand...
Click to collapse
Hmm, maybe you can try going to The Ethernet tab on the Other Networks page. Is it grayed out? Heavens, I am planning to buy that ethernet adapter for my Galaxy View humungous 19 inch tablet althought the adapter is still quite expensive .... selling for USD80 on ebay the last time i checked.
kcoul said:
What are you trying to plug in? It might be the hub is working but your device is not.
Click to expand...
Click to collapse
I just want to use the Ethernet Device, the USB Connections are not interesting for me.
I can't find any option to enable Ethernet.
kcoul said:
What are you trying to plug in? It might be the hub is working but your device is not.
Click to expand...
Click to collapse
do you only use the usb hub or really use the ethernet device with disabled wifi?
I used everything, mouse, keyboard and Ethernet. All worked. PaulineLam95 is right. More options. It was not grayed out for me. I had en0 connection
kcoul said:
I used everything, mouse, keyboard and Ethernet. All worked. PaulineLam95 is right. More options. It was not grayed out for me. I had en0 connection
Click to expand...
Click to collapse
I can't believe, on the more connection setting I only have the Options: Printing an VPN.
Ethernet does not work! A Mouse on the Hub works.
See my Attachment.
puni**** said:
I can't believe, on the more connection setting I only have the Options: Printing an VPN.
Ethernet does not work! A Mouse on the Hub works.
See my Attachment.
Click to expand...
Click to collapse
Is your Galaxy View a Verizon (SM-T677VZKBVZW) or AT&T (SM-T677AZKBATT) variant with the 64GB storage? Those versions probably have ethernet option disabled.
paulinelam95 said:
Is your Galaxy View a Verizon (SM-T677VZKBVZW) or AT&T (SM-T677AZKBATT) variant with the 64GB storage? Those versions probably have ethernet option disabled.
Click to expand...
Click to collapse
I got the Model: SM-T670 with 32GB Storage, brought on Amazon.it.
Android Patch 2015-11-01 (No newer Update available)
So if there is no solution I will return the Lan Adapater tomorrow.
the ET-UP900 is is $150, wth??? i picked up this guy for $14.99 shipped and it works great for ethernet, plus it has 3 usb ports you can use for a wireless mouse/keyboard, usb audio out, connect external storage, etc., etc
https://www.amazon.com/gp/product/B00L32UUJK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1