I can no longer connect my Vibrant to my PC (it doesn't pick it up). I could try using another kernel but I can't use Odin to flash to...obviously. : /
Solutions?
i am having the same exact issue. this is the second time this has happend. the first time was during the dead horse test kernels which is what i believed to have been the cause when there were mount issues going around. a warrenty exchange was done and now that this has happend again, i am beginning to think this is due to hardware failure of the phones usb port, even though the phone still charges. suggestions are openly welcomed. have tried...
swapping usb cables
switching usb ports
different computer
flashed back to latest bionix (mount & odin was working fine)
flashed back to older overstock kernel 1.4.2 (when working fine)
rebooting phone while usb connected to pc
enabling / disabling usb debugging
possible cause may be not safely removing hardware from pc? but if that was the case, i would think curruption of the sdcard(s) would have happend.
Install the Nexus S USB drivers
Thanks I'll try that when I get home from work.
Sent from my SGH-T959 using XDA App
> . > I tried installing the Nexus S drivers through the SDK manager and it's still a no go. My phone doesn't even recognize that it's connected to a PC.
Update : Had to manually install the driver. Working now. Thanks ^ . ^
Vineares said:
> . > I tried installing the Nexus S drivers through the SDK manager and it's still a no go. My phone doesn't even recognize that it's connected to a PC.
Update : Had to manually install the driver. Working now. Thanks ^ . ^
Click to expand...
Click to collapse
Where did you get the nexus S drivers? I'm having a hard time looking for it.
Just search Nexus S USB driver. Should be the first link. Download is on the top left bar. (be sure to run the SDK manager as admin on windows 7 or it won't download the driver)
After I flashed the new kernel on my phone I plugged it into my PC but windows couldn't assign the driver automatically so I had manually add the location.
C:\Program Files\Android\android-sdk\extras\google\usb_driver
The vibrant was running CM7 for a few hours until I noticed that it wouldn't charge via USB. It wouldn't charge from the wall outlet nor when plugged into a computer (the computer did recognize that it existed but didn't have the drivers for it).
I tried to recover it but then the process failed and it was stuck in boot menu. The vibrant only loads to the first splash screen. I can put it into download mode however ODIN doesn't recognize it. Nothing shows up. I've installed the Samsung Vibrant drivers and I've tried Kies Mini however Windows 7 32bit won't recognize the device. How can I install the stock ROM if Odin doesn't recognize it?
if u can get into dl mode but cant get pc to recognize ur phone use aio toolbox or get a usb jig that may help!!
or since your on CM7 ..try the Nexus S drivers and see if it recognizes it.
Could it be that maybe USB Debugging is turned off? At this point there is no way I can boot up to turn it on.
All of the drivers I install end up not being installed correctly, I get errors.
jmcghee1973 said:
or since your on CM7 ..try the Nexus S drivers and see if it recognizes it.
Click to expand...
Click to collapse
This. You can find them here.
CyanogenMod 7 for Vibrant Q&A
Just press Ctr+F and search ''Nexus S'' and you will find the instructions on how to get them.
I'm having some difficulty. I don't have a phone under my device drivers. All that's showing up is PCI Simple Communications Controller. I click on update driver and direct it to the SDK. Nothing happens.
Edit:
Downloaded the Intel ME: Management Engine Interface driver for the PCI problem. It seems to be fixed. Now my phone is showing up as unknown device. Working on it some more.
So I switched to the energy miui yesterday and it worked for like 20 minutes then wouldn't boot up anymore. for hours I kept getting "usb device not recognized" error then out of nowhere I got it to work and started to use odin to flash back. Well during that time it failed and wouldn't start up for awhile but now I can get it into download mode again but my pc won't recognize my vibrant no matter what I do.
I run win 7 x64 with 2 different cables, 2 vibrants (the other vibrant has zero problems connecting and works every time with my pc) and I've tried different usb ports. I've taken the battery out re plugged the usb several times and even tried installing all my usb hubs and nothing.
What can I do to get my computer to recognize my vibrant so I can fix it?
Usually i get "usb device not recognized" message when some stupid reason samsung drivers stop working. What i do is uninstall them, reboot and then install them again. Give it a try, also make sure you're connected to usb port on back of the computer. You can also try heimdall if odin doesn't recognize your phone. Couple of time that has worked for me also.
Try installing Samsung Kies mini, it will automatically install the drivers so that your device can hopefully be recognized, if that does not work, well just use your other vibrant.
I gave that a try but I cannot seem to get heimdall to even work. I keep getting random errors each time. 3 different ones so far. Is there any other way I can do to force my computer to recognize it? And I have the keis but it hasn't helped either. It just tells me to connect.i don't think it is the drivers when my other vibrant connects just fine without problems
If you were in MIUI, you are a going to need the Nexus S drivers for Odin to recognize your phone. You can get them here:
atinm said:
Q: Where can I get the Nexus S drivers?
A: Download and install the Android SDK here then download "Google USB Driver package, revision 4"
Once downloaded, right click on "Computer", "Manage", "Device Manager", "Nexus S", "Update Driver Software", and point it to wherever you isntalled the SDK.
Click to expand...
Click to collapse
I am completely new to this so bear with me. I am trying to root my samsung fascinate. What are the steps i need to take to do so?
http://forum.xda-developers.com/showthread.php?t=1238070
Refer to section 5
http://bit.ly/uLiskn
Use guide by Droidstyle......nuff said
Sent from my SCH-I500 using XDA App
I have been able to do this on my wife's phone pretty easy and all I do it find a copy if CWM recovery (often called CWM all), a copy of update.zip, and the latest version if Odin. Use your factory USB cord and plug your phone into your PC. Let it install all the drivers. Once I stalled open your phone and mount the SD card so you can see it as a hard drive. Place the update.zip file on the SD card, but not in any folder. From there unhook your phone and power it down. Remove the battery and start Odin. Plug your USB part of the phone cord into the PC (don't connect it to the phone yet). Hold down the volume down button and power button while connecting the phone cord to the phone. You will see a yellow triangle and Droid on the screen. From there click the PDA button and find the CWM file you downloaded. Click start and let it do its thing. The phone will power down and you can then replace the battery and start your phone. I usually let my phone power up and then power it down again. After it is off you will then need to hold the volume up, volume down, and power button to boot into recovery. Once in Recovery you can choose the option to install update.zip. Let it do its thing and then reboot the phone. You should be good to go.
icemanwbs said:
Use guide by Droidstyle......nuff said
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Sent from my SCH-I500 using XDA App
zander78 said:
http://bit.ly/uLiskn
Click to expand...
Click to collapse
LMAO... you crack me up man.
millwood said:
I have been able to do this on my wife's phone pretty easy and all I do it find a copy if CWM recovery (often called CWM all), a copy of update.zip, and the latest version if Odin. Use your factory USB cord and plug your phone into your PC. Let it install all the drivers. Once I stalled open your phone and mount the SD card so you can see it as a hard drive. Place the update.zip file on the SD card, but not in any folder. From there unhook your phone and power it down. Remove the battery and start Odin. Plug your USB part of the phone cord into the PC (don't connect it to the phone yet). Hold down the volume down button and power button while connecting the phone cord to the phone. You will see a yellow triangle and Droid on the screen. From there click the PDA button and find the CWM file you downloaded. Click start and let it do its thing. The phone will power down and you can then replace the battery and start your phone. I usually let my phone power up and then power it down again. After it is off you will then need to hold the volume up, volume down, and power button to boot into recovery. Once in Recovery you can choose the option to install update.zip. Let it do its thing and then reboot the phone. You should be good to go.
Click to expand...
Click to collapse
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
stevebanks said:
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
Click to expand...
Click to collapse
no...you need odin to flash cwm recovery so you can three finger into that recovery to flash the superuser.zip
Try another Pc!
stevebanks said:
Hi Guys-
I'm having a problem with my Samsung Fascinate as well. Its currently running Gingerbread 2.3.5 build EH03. I had my phone flashed to MetroPCS a couple of days ago with Talk/Text only. Now I'm trying to root my phone using Odin. I want to install CyanogenMod, because I ran it on my old HTC Hero and was satisfied with it.
The problem is that my phone will not mount as a USB Storage. I'm using a Mac, however I have Parallels running Windows XP SP3. I have installed the Samsung drivers from the Samsung website and the drivers do show up in the device manager, but it still doesn't mount as a USB storage device in Windows. On the phone I receive the notification that its USB Connected - select to copy files to/from your computer. But, again nothing happens when I select it.
Whenever I plug my phone in the USB port Odin recognizes it, but when I put the phone into download mode it doesn't show up in Odin. I've also tried to see if it shows up using ADB from the Android SDK. Its not listed as a device when I run the command adb devices.
Is there anyway to root the phone if its not showing up in Odin when its download mode?
Click to expand...
Click to collapse
I think you can root the phone without having to flash CWM recovery, but it does require ADB so I don't know if that would be any help. FWIW, I have a mac too, and haven't had any luck using heimdall (it doesn't recognize the device), although I haven't tried any sort of VM or anything like crossover to use odin on it. I've just accepted using a windows machine when odin is required
Does your ADB work with other devices? For whatever reason, I couldn't get it working with the fascinate, then I tried it a few days ago and it worked all of a sudden. Another workaround is to use the wirelessADB app from the market. If you search for "galaxy s mac" you'll see that you're unfortunately definitely not alone in having connectivity issues with OSX.
k_nivesout said:
I think you can root the phone without having to flash CWM recovery, but it does require ADB so I don't know if that would be any help. FWIW, I have a mac too, and haven't had any luck using heimdall (it doesn't recognize the device), although I haven't tried any sort of VM or anything like crossover to use odin on it. I've just accepted using a windows machine when odin is required
Does your ADB work with other devices? For whatever reason, I couldn't get it working with the fascinate, then I tried it a few days ago and it worked all of a sudden. Another workaround is to use the wirelessADB app from the market. If you search for "galaxy s mac" you'll see that you're unfortunately definitely not alone in having connectivity issues with OSX.
Click to expand...
Click to collapse
very true...ADB is another option to root, but I never recomend it because most folks will have trouble using it....dont mean the in a condescending way, just sayin.
For sure, just thought I would throw it out there. Looks fairly simple actually from the guide nitsuj17 posted in the OP of the EH03 odin/heimdall package, well maybe straightforward would be a better word, just since it's laid out step-by-step.
I actually had problems using cwm... it failed to flash the su.zip properly. So I used the latest version of GeeWiz recovery on stock EH03. Worked fine. Roots every time. #hopethathelps
Sent from my SCH-I500 using xda premium
There is a thread with a stock root with voodoo lag fix and ROM manager. Step by step instructions as well.
Sent from my SGH-T959P using xda premium
cant install roms
Hi, guys new to rooting and custom roms but ive hit a snag.
I have acheived root by using section 5 here (http://forum.xda-developers.com/showthread.php?t=1238070)
but i cannot install any roms all i get when i select the zip file is a screen that shows the unpacking then it goes to a triangle with an exclamation point. then reboots into normal android loosing everything i had installed. i made a backup using rom manager but it has dissapeared so now i have nothing to lose. can anyoone help.
all i want to be able to do is put ics with very few apps and overclock my cpu
Any help would be great
Samsung fascinate running android2.3.5 with superuser
thx
1. You don't need to be root first before flashing roms.
2. It sounds like you're possibly booting into the stock recovery.
If you want to flash ICS, just follow the steps in that section 3 of the guide you've already been using.
I tried but it failed on step 9/10
So you're saying that it fails after you press start in odin (flashing the stock EH03 package)? What error are you getting and when exactly is it happening?
If you're not on any rom and just on stock EH03, I'd think you should be able to just odin the CWM recovery and install ICS from there.
not sure what the exact message was but yes after i hit start it initalized did nothing for about 3 minutes of the five and got a fail message
And you're sure you're using the correct files and selecting the right things in odin? Make sure the stock EH03 rom is in the PDA section, the atlas 2.2 file for PIT, and repartition is checked. Could possibly be a bad download too, I'd maybe try redownloading the files and trying again. Also, are you using Odin 1.3 that was linked in the guide?
Alternatively, you could just try flashing the CWM4 fixed for CM7 in odin, then three-finger into recovery and flash ICS from there.
Oh and just making sure you're getting into download mode the right way, I personally pull the battery, that way it doesn't reboot after you flash whatever it is you're flashing. If none of that works, I'd try a different USB port/cable. Is odin recognizing the device properly?
I just plugged my S3 into my PC to copy some files over, and all of a sudden i got this error from windows saying USB Device not recognized and this USB device has malfunctioned. I heard its a known problem on android phones, but never really found a solution for it. Can someone help?
cr0wnest said:
I just plugged my S3 into my PC to copy some files over, and all of a sudden i got this error from windows saying USB Device not recognized and this USB device has malfunctioned. I heard its a known problem on android phones, but never really found a solution for it. Can someone help?
Click to expand...
Click to collapse
I had the same problem.Make a back up of your phone
and do a factory reset.
tried installing usb drivers sgain ??
Sent from my GT-I9300 using xda premium
try installing Kies?
Its ok i got it to work. Went into download mode and plugged into my PC and windows installed some drivers, Odin detected the phone just fine. Then i booted up into android like normal but switched to PTP mode, windows then installed the MTP drivers (though it was already installed) then after that all worked well again
Please help...
Im having the same problem. But nothing seems to work for me. Tried everything possible. Re-installed drivers, connected in download mode, installed Kies, reset to factory setting..ALL TO NO AVAIL. I keep getting 'USB device attached to this computer has malfunctioned...' message...
The solution isnt always the same for all users.. Fortunately mine was fixed by a simple driver install. I remember browsing the internet and found out that there is a way to fix it but it requires simple adb commands and the Android SDK.