Related
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
fizzle101 said:
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
Click to expand...
Click to collapse
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Can you try booting in fastboot and tell me if that is recognized?
it still doesnt recognize it in fastboot
fc_Kuro said:
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Click to expand...
Click to collapse
i have tried that and it doesnt help
fizzle101 said:
i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message
Click to expand...
Click to collapse
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
ok i will give that a try
crk23 said:
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
Click to expand...
Click to collapse
that didnt work. o well i guess i am stock with the rom i have there.
fizzle101 said:
that didnt work. o well i guess i am stock with the rom i have there.
Click to expand...
Click to collapse
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
robocik said:
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
Click to expand...
Click to collapse
i have tried everything. changed the cable, used different pc but nothing works. i think is a hardware problem, something might be broken inside or something like that
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
baklap said:
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
Click to expand...
Click to collapse
No i havent and i gave up trying because i dnt think there is a fix for it. if yours is unrooted and the warranty is still valid you should consider returning it to HTC maybe they might replace it
got the same problem. Any solution so far ??
ddotpatel said:
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
Click to expand...
Click to collapse
Did you try that?..... You need to do the reboot PC/Laptop after uninstalling ALL HTC drivers! Then when you reboot PC, plug phone back in, should say "not recognised" again,... then follow BTDAG's guide. T'is definitely a driver issue!
tried flashing 3 roms, modaco, radug and now kimera... none working.
can connect in fastboot, it shows up in device manager as android 1.0
ive tried 3 different usb cables and 4 differet pcs, still there is no response on my phone !!!
using villian rom 10.0 rite now.
okay it boots up into fastboot and fastboot usb shows up on the screen in red,
BUT when i use the "adb devices" command in adb it doesnt show the device,
it is showing as android 1.0 in devices and printers (windows 7)
You need to use....
fastboot devices
....when your are in fastboot.
What happens when you go into your recovery, select "Toggle MS/USB" with USB connected to PC?
okay
fastboot devices command shows some serial number.
then i tried adb remount, it gave an error....
enabling usb-ms with cable attached gives no response
ok i think it might be USB driver like ddotpatel said but i am not sure.
i reinstalled my whole windows 7 to 32bit now instead of the 64bit version i was using before and today i just connected my hero to my PC and windows 7 did its thing and installed the drivers and finally my hero can mount the SD card in my PC again although i kept getting this can perform faster in USB 2.0 port or something like that i didn’t care as long as i can mount my SD card again.
now went into fastboot and used the fastboot device command and i could see my hero serial no. but when i try to flash the amonra recovery i got the permission error (i cant really remember). i tried flashing using the adb method but still no luck.
so i went to market and downloaded rom manager and used it to flash clockwork recovery and now i could boot to clockwork recovery.
from this recovery i can now flash any rom i want and although there are still a few more problems i am glad now that i can flash custom roms again.
the problem i can see so far but i can deal with is
1. i don’t think fastboot commands work even if the phone is detected.
2. SD card mounts at USB 1.1 speed. (i have tried different ports and cable but still the same thing and this is the ports i use for my N1, Desire and my other android phones with USB 2.0 speed)
PS: adb commands for pushing and removing apps is working.
Hope this can be helpful to those experiencing the same problem.
Instead of re-installing your entire OS just use usbdeview to remove the failing drivers.
Also remove any old HTC Sync installs and install the latest version.
I have tried multiple times to install the USB drivers for my Optimus T (LGP509TN) running CyanogenMod 7.1 (6.5.8). I've tried installing, uninstalling - tried using the LGmobile agent to install... 5 of the 7 install fine but the LGE Android Platform USB modem and the USB Mass Storage Device fail. (see attached image called "usb installation")
When I turn on USB tethering, another USB installation routine runs and fails. (see attached image called "after turning on USB tethering". In Device Manager, I get a bunch of exclamation marks. (see attached image called "Device Manager".
USB storage actually will work - but takes a long time to kick in - and often crashes. Same with USB tethering. I've tried numerous different USB cables so that's not an issue.
Although I have an LGP509TN, I'm not sure if I should be installing LG509 drivers or LGP500 (as I'm running CyanogenMod 7.1 for LGP500). I'm not sure if there actually is a difference between the two. I've tried both and get the same issue.
Any direction would be sincerely appreciated.
Thanks,
Dave
Hi ,
I am also finding same problem. installed cyanogenmod
I took back up in ROm manager but not in recovery mod.
LGE android USB Modem fails to install.
Rest things are installing and working fine.
Help me out if you have found the soultion.
For you what i suggest is.
1. uninstall LG united drivers through control panel.
2. Re install it and turn on USB Debugging mode in your phone and connect it.
Everything will get installed. But not sure of LGE Android USB MOdem. IF you get soultion let me know even
I've tried everything that's been suggested. I've tried many different versions of drivers. Uninstalled, reinstalled.... Sometimes I'm even getting the Blue Screen of Death on my laptop when trying to connect the phone using USB. Wireless tether continues to work flawlessly. It's simply the USB connection that doesn't seem to want to cooperate.
I'm starting to think it might be a hardware issue - except that everything else with the phone works perfectly. I'm also going to buy a couple of new USB cables to try to determine if it might be a faulty cable.
1. Turn on USB Debugging mode
2. Connect USB
3. Then drivers stopped installing, turn off USB Debugging mode, but do not disconnect usb cable.
4. It will install some drivers and says all OK
5. Turn on USB Debugging mode (do not disconnect usb cable), and all drivers will be installed.
This is my method, and it worked for me.
Thanks for the instructions. The challenge I face is that the 2 devices never complete. (See screenshot.) If I close the dialogue, it tells me of the failure. When I switch on USB Debugging, it doesn't connect.
snsd said:
Thanks for the instructions. The challenge I face is that the 2 devices never complete. (See screenshot.) If I close the dialogue, it tells me of the failure. When I switch on USB Debugging, it doesn't connect.
Click to expand...
Click to collapse
Experiencing similar problems with getting the USB drivers required for native tethering installed successfully. Running Windows 7. A walkthrough of clearing any existing drivers then reinstalling the proper ones might help. I've tried uninstalling via the control panel, system, devices area, but a complete purge/deletion of the drivers might be needed. Any pointers to a proven way to do so would be appreciated.
dude this happens to me week ago
first tell me are you running .32 kernals ??
if yes then flash it once aganin
or use .35 kernals it's best for cm7 series
Hi Folks, I rooted my GN a few days ago with no problem. Now that I want to flash a Recovery to Install a ROM the computer don't recognize the phone. I have tried a few methods that I saw online with no results.
Looking for some help! Thanks in advance!
On a Windows machine go to Start/Control Panel/Windows Update. With the phone plugged directly to the PC, not a hub and click "check for updates". You might have to do this a few times and reboot, I did.
Odds are you tried this, but just in case....
USB Driver Not Being Recognized For SYNC
Following are my observations and possible steps to
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA. If it already selected to PDA, reselect it by select MODEM and then PDA again.. Only change the USB setting.. and then press back. try reconnect.
6. The Laptop will start recognizing the required drivers and install them
also Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
aj_vogtman said:
On a Windows machine go to Start/Control Panel/Windows Update. With the phone plugged directly to the PC, not a hub and click "check for updates". You might have to do this a few times and reboot, I did.
Click to expand...
Click to collapse
aj, Im installing some updates now and I will tell u then the results!
Sent from my SAMSUNG-SGH-I717 using xda premium
enjoythemusic said:
Odds are you tried this, but just in case....
USB Driver Not Being Recognized For SYNC
Following are my observations and possible steps to
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA. If it already selected to PDA, reselect it by select MODEM and then PDA again.. Only change the USB setting.. and then press back. try reconnect.
6. The Laptop will start recognizing the required drivers and install them
also Phone is not recognized by laptop when it is in USB debug mode, MyPhoneExplorer does not recognize when it is not in Debug mode
Click to expand...
Click to collapse
enjoythemusic, also I had tried this before and doesnt work for me. Thanks for your help. Im installing some updates now and will see if work if not will do this again over the updates!
Sent from my SAMSUNG-SGH-I717 using xda premium
I rooted the stock GB yesterday then flashed DAGr8's ICS rom with a ton of mods afterwards and mine is functioning fine.
I did notice a Samsung driver available as an optional install in Windows Updates. Is that the one you tried to install?
Help mee.
I have bought a s3 that is locked to Orange, need to unlock, but odin does not see the phone in recovery/dl mode.
Odin see the phone in normal mode , but each time i put into start/+vol/home odin see nothing.
I have kies updated.
Thanks
crazydiamond1970 said:
Help mee.
I have bought a s3 that is locked to Orange, need to unlock, but odin does not see the phone in recovery/dl mode.
Odin see the phone in normal mode , but each time i put into start/+vol/home odin see nothing.
I have kies updated.
Thanks
Click to expand...
Click to collapse
I had a similar thing when i was plugged into a usb hub
Was ok when i plugged directly into the pc
Install Samsung Kies to be able your PC to detect your phone via Odin
also check the debugging mode in the developer options
bordikun said:
Install Samsung Kies to be able your PC to detect your phone via Odin
also check the debugging mode in the developer options
Click to expand...
Click to collapse
I have Kies, also tried debugging, i need root to unlock phone
Try to use the latest Odin
Odin v3.04
bordikun said:
Try to use the latest Odin
Odin v3.04
Click to expand...
Click to collapse
I have uninstalled the older Kies, re installed the latest.
I have installed the lastest odin.
Have tried to link up with and without debugging, odin still does not see phone when in recovery mode.
Only time odin see the phone when phone is in normal mode.
Starting to get annoyed now lol, i cant cut my sim to fit phone, untill this is done
I cant see my s2 on odin either, what am i doing wrong ????
1. Reboot PC
2. Ensure KIES is not running and kill any KIES processes in PC task manager.
3. Download mode
4. Connect USB directly to PC port (no hub)
5. Wait for any drivers to instal or load on PC
6. Start Odin in administrator mode
If still no good;
a) Different USB cable
b) Different PC USB port and wait for drivers
Sent from my GT-I9300 using xda premium
Thanks . Seems that I had been pressing volume up not down.
I have another question . I used chainfire Rom to debrand the phone but keis does not recognize . How can I solve this . Could it be because the phone is rooted ?
i am having this problem at the mo, I have tried all of the above, apart from a different pc.
oden worked fine with my galaxy s2
is there any more updates on how to sort this out please?
thanks
ian
I know this is a 7 day old thread, but I feel for you having been in the same situation. Firstly, have you installed the Android SDK? If not then I advise you to do so. Do a search on how to install the SDK. There maybe smaller downloads available with a package of the binaries you need to do some testing i.e. adb. The instructions will elaborate about how to set up your Environment settings in Windows. Essentially ADB needs to be called from within any part of your Windows system....or else you will have to cd to its location each and every time you want to do something like this. So once you have done that, open command prompt and type adb and see what comes up? If it says bad command or file name it means your environment settings for the ASK are incorrect, if it displays the adb help text in command prompt you are ready to proceed.
When you plug your device in (not in DL or recovery modes) is it detected by the PC? If so then your drivers are probably fine. If not then it maybe 1 of 2 things? 1 the device is detected but the MTP drivers have not been loaded or 2. No detection what so ever and all drivers need to be installed.
To determine how to proceed you will need to do a bit of investigating.
Note the USB drivers are included as part of the Android SDK.
Check in Device manager inside of Windows to see if anything is detected when you plug it in. If so but it has a yellow exclamation ! then it would indicate you need to update your drivers (but not always?). From here you can test to see if the phone is detected and you only need MTP drivers.
If not then I would suggest uninstalling Keis all together and downloading and installing the Samsung USB drivers separately. Install the drivers. Plug in the phone. If it is not detected straight away, then reboot the PC then plug the phone into a different USB port. From here you can determine how to proceed by using adb.
plug your phone in via USB and open command prompt and type this: adb devices
You should see 1 of 2 things.
1) The words "list of devices attached" followed by a 16 digit long ID number a gap and the word "device"
2) just the words "list of devices attached" and then blank and nothing else?
If a device ID is returned then you can proceed with the following. Otherwise you need to do some additional trouble shooting
Proceed here:
Once it is detected by Windows and shows up in Explorer then unplug the phone and go into settings and developer options and check enable USB debugging. Once you have done this it should allow your device to be seen in DL and recovery modes.
Troubleshoot: If not detected try the following:
1) Reboot the PC and plug into a new USB port that you have not previously plugged into.
2) Try disabling USB debugging plugging the device in and then unplugging it and reenabling USB debugging
3) From the status bar try switching modes between MTP and PTP modes. Wait a good minute or so between to allow Windows to detect the driver change. Tip a good indication is your notification tray Icon with green USB disk with a magnifying glass swirling around....Note if you cannot see this at all you probably should drag it into the notification panel so that you CAN!
4) Open up device manager again and ensure no yellow exclamation marks !
Once all this is right and you can get List of devices attached followed by an ID number then you can for sure be able to detect your device from Odin. Make sure you are running Odin 3.04, run it as admin (not necessary but have heard that it helps?)
Good luck
James
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
rekamyenom said:
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
Click to expand...
Click to collapse
have you tried factory resetting the phone?
afasayan said:
have you tried factory resetting the phone?
Click to expand...
Click to collapse
Several times
rekamyenom said:
Several times
Click to expand...
Click to collapse
You can try with minimal/no drivers i.e. uninstall kies if you have it and delete the drivers you might have installed on your own-it sounds counter productive but it has worked for me a few times.
You can also try to either install kies or the drivers separately.
Try the forum for your own phone, the people there might know better about this problem.
Also what OS are you on?
afasayan said:
You can try with minimal/no drivers i.e. uninstall kies if you have it and delete the drivers you might have installed on your own-it sounds counter productive but it has worked for me a few times.
You can also try to either install kies or the drivers separately.
Try the forum for your own phone, the people there might know better about this problem.
Also what OS are you on?
Click to expand...
Click to collapse
I will give all that a try. I'm on 4.4.2 build NH3. That's why I need Odin, to get back to build NE3
rekamyenom said:
I will give all that a try. I'm on 4.4.2 build NH3. That's why I need Odin, to get back to build NE3
Click to expand...
Click to collapse
By OS I meant the computer's OS.
afasayan said:
By OS I meant the computer's OS.
Click to expand...
Click to collapse
I have tried several computers using Windows 7 and Windows XP both 32 and 64
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
parasharenator said:
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
Click to expand...
Click to collapse
Dont worry....this time go to download mode and flash eugenes that does not brick aka Eugene_2E_JK2_Froyo with the same pit file and ur good to go brother
Similar Problem but different results.
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
david.carlton.jr38 said:
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
Click to expand...
Click to collapse
Can you explain the steps your taking when you try to get into odin
Sent from my SGH-T959 using xda app-developers app
The steps I take is put the phone into download mode by pulling the battery and then holding both the volume up and down then reinsert the battery. It shows the download screen. I then start odin and I have tried version 1.7 and the latest version of 3.0.7. Then I plug my phone into the USB port and windows pops up saying unrecognized device. I have reinstalled drivers several times. Now to describe my desktop is that it is a pentium III 550 Mhz...and old computer and running Windows XP Professional. I am able to do the mass storage when the phone is on normally so it recognizes it that way though. I have tried different USB ports on it as well so just unsure. I have rooted the phone and have superuser app access. ROM manager was supposed to have flashed the recovery mode but it never goes into the CWR mode either and its version is 2.5.1.2 which I have seen work on these phones in videos on YouTube so guess I am trying a different route so I can play with the mods to find a ROM I like. I was going to try the Avatar ROM for the vibrant but just cannot seem to get to the point where I can get the ROM flashed. Any help would be greatly appreciated.
Keep the battery in and lull up Odin. Cut off the phone and hold both volumes while inserting USB hopefully the computer will then recognize it
Sent from my GT-I9000 using xda app-developers app
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
Stay away from kies I will Brick your device as for the computer being old I don't know. I've never had this problem before. Sorry o couldn't help
Sent from my GT-I9000 using xda app-developers app
david.carlton.jr38 said:
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
ioancr said:
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
Click to expand...
Click to collapse
Do you have the link to the Heimdall one-click package or do I just google it?
david.carlton.jr38 said:
Do you have the link to the Heimdall one-click package or do I just google it?
Click to expand...
Click to collapse
I found the link:
http://d-h.st/M93
on the Repository thread: http://forum.xda-developers.com/showthread.php?t=1875966
And since only thing remaining in your case is USB cable, I would say try with a different micro USB cable, even a different vendor's will do, as it did the trick for me( see the edit in OP)
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
david.carlton.jr38 said:
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
For now, you can try any micro usb cable that fits, they all have same specifications.
Okay. Thanks!
Sent from my SGH-T959 using xda app-developers app
Stuck on cache
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Mentalmama said:
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Click to expand...
Click to collapse
Great that you could get it to the download mode.
Follow these steps:
1. Make sure that you have the correct drivers installed for your Operating System. Preferably, download the latest drivers. You can verify when your device is recognized when connected in download mode.
2. Make sure you follow this thread for Odin flashing http://forum.xda-developers.com/showthread.php?t=849028
3. If unable to flash using ODIN successfully, try with different USB ports, on same computer or a different one, say, a laptop.
4. If still unable to do so, try with different USB cables (any micro-usb should do).
In this way, you should by trying multiple alternatives at each step you should be able to eliminate the options and figure out what is really creating the problem in your flashing. Trust me my friend, this has not go anything to do with technology. just follow the steps, try alternatives and you would resolve this. Do post back on thread, if you have any queries.