I am rooted running cwm and the stock rom. My question is... I have 2.1 ics cleanrom downloaded onto my sd card (not installed yet). Is their a way to save the ROM I am running right now onto my computer so if I dont like ics or have trouble with it, I can revert back. I would like to be able to just copy it off my phone onto my comp to save it (so I dont have to download it because I have Satellite internet and it would take me until the year 2020 to get a rom downloaded because hughes net is so slow.
Thanks in advance
USB cable, create a folder on your computer, copy and paste. Can do this with any folder or file on your phone that your computer can see. Or you can upload and store it on drop box.
Sent from my ADR6425LVW using xda premium
remmy5r said:
I am rooted running cwm and the stock rom. My question is... I have 2.1 ics cleanrom downloaded onto my sd card (not installed yet). Is their a way to save the ROM I am running right now onto my computer so if I dont like ics or have trouble with it, I can revert back. I would like to be able to just copy it off my phone onto my comp to save it (so I dont have to download it because I have Satellite internet and it would take me until the year 2020 to get a rom downloaded because hughes net is so slow.
Thanks in advance
Click to expand...
Click to collapse
Perform a nandroid before you flash. You should do that anyway, but that way you can just restore the nandroid if you don't like it. That will bring you back to how you had everything right before you flashed the new rom. You just need to make sure you flash the boot.img or kernel from the nandroid again to get everything to work.
wasabi, I am doing a nandroid right now. So if I dont like the ics I will just have to do a nandroid recovery.
Where can I find the boot.img and what kernel would need to be reflashed?
I would also recommend doing a backup right after you flash and get everything the way you want. That way if you mess up something you have a backup exactly the way you want it
Sent from my ADR6425LVW using Tapatalk
remmy5r said:
wasabi, I am doing a nandroid right now. So if I dont like the ics I will just have to do a nandroid recovery.
Where can I find the boot.img and what kernel would need to be reflashed?
Click to expand...
Click to collapse
Well, the boot.img is the kernel. So you need to find the ROM that you are using (and making a nandroid for right now) and extract the boot.img from that ROMs zip. Essentially, download that ROM again (if it's not on your computer) unzip the .zip file or copy and paste the boot.img out of it. You can then put it on your SD card and use Scrosler's Clean Flash tool to flash that boot.img. That tool is in the android development section. That should get you where you need to go.
Ok, I have this zip on my laptop "z471-VIGOR-GB-CK3-CFS-122911-2139" and "flashmeinrecovery". The z471 file has a "kernel" and boot file in there, is that the one I want?
remmy5r said:
Ok, I have this zip on my laptop "z471-VIGOR-GB-CK3-CFS-122911-2139" and "flashmeinrecovery". The z471 file has a "kernel" and boot file in there, is that the one I want?
Click to expand...
Click to collapse
That's ziggy's kernel. You don't want that yet. What ROM are you coming from?
EDIT: I have to run, but you want the boot.img that is in the ROM you are using right now, not that one. If you go back to that ROM, you can then flash ziggy's kernel after you have the ROM's kernel on your phone. What I would do is find the ROM that you are using, pull that boot.img and use it. If you are using the stock ROM, there are stock kernels posted in the android dev section so you can use those. Hope this helps, cuz I need to run. Someone else should be able to get you the rest of the way if you get stuck.
Related
this thread is open to help newbies to install the 2.1 custom rom with the simples way..
you also can discuss any problem here..
dont mess the dev thread with a dumb question...
thanks to "Perceval from Hyrule" for the original tutorial..
this is revise version for 2.1
INSTALLATION FOR 2.1 AOSP
Before attempting anything, make sure you have AT LEAST 50% of battery charge. Don't try anything with low battery, you can abort the flashing and brick your device !!!
Please make sure you're also running a 2.1 rom (Generic, nordic, official, custom...)
1st step:
make sure your computer is adb debugging ready..
in case in need for command execution..
- Download Android SDK
You don't need to save the entire archive (but you can), you just need the Tools folder (because it contains ADB, the Android Debug Bridge we need to install files).
2nd step:
- On x10 :
Enable USB debugging (Setting > Applications > Development).
Root your device. easiest way by using z4root.
Download and install Busybox (from Market), make sure it says "Done!".
3rd step:
install xrecovery for recovery menu.
xrecovery a.k.a recovery menu
4th step:
option 1:
Download rom.
2.1 AOSP ROM (make sure 2.1 since this tutorial is for 2.1)
extract the rom (u will get 2 folder + 1 files)
upload the file into your sd card root(sdcard/*.zip)
rename the *.ZIP to Update.ZIP
*the 2 folder contain application which u can install if u like
option 2:
Download rom.
2.1 AOSP ROM (make sure 2.1 since this tutorial is for 2.1)
extract the rom (u will get 2 folder + 1 files)
upload the file into your sd card root(sdcard/*.zip) or in any folder u like
*the 2 folder contain application which u can install if u like
5th step:
boot into recovery menu (by restart and hit few times back button when "SONY ERICSSON" word appear)
backup your original rom(in case u want to restore next time)
hit full wipe
option 1:
hit install update.zip from SD card
option 2:
hit install custom zip
search for the custom zip in folder where u save it
hit the zip file
after reboot, u will get custom rom installed in your X10
good luck ;-)
TIPS
1-u can do like rendeiro2005 said by creating rom folder and put the rom collection in it..
so if u want to change or try other rom just choose zip file from the particular folder...
this require using step from option 2
2-another one, by creating folder which contain backup image..
u can collect your friends backup image and put in one folder..
if u want to try, just restore the particular image file using backup/restore option in recovery menu and choose the backup image file..
collection of custom rom backup file for recovery menu:
2.1 Custom ROM AOSP by jerpelea & zdzihu
2.1 Shipped ROM 002 Full by jerpelea
2.1 Shipped ROM 002 Light 002 by jerpelea
Eternity by SEMPITERNAL
Xten by rabetionline
X10 Eminence by XperiaX10iUser
[2.1 AOSP THEME] X10 AOSP Theme by rmourar
Android 2.1 Gingerbread Style by Thijs96
for testing purpose only (not fully work)
MIUI tehnical preview by jerpelea
Gingerbread 2.3 PREVIEW rom by zdzihu
p/s: anyone who want to contribute their customize custom rom using backup image and list here can either pm me or response in this thread..
for use with recovery menu only..
Hi bro,
Only two calls on your excellent tutorial:
1. No need to put the rom in the root of the sdcard. I, for example, to distinguish the roms, I`ve created a folder "Rom" in the root and put the roms in there.
2. It is not necessary to rename the *. zip file.
When we entered the xRecovery, you can go to "install Custom Zip> zip Choose Custom from sdcard>" Now in my case I a. .. "Roms >........" and I intend to choose
rendeiro2005 said:
Hi bro,
Only two calls on your excellent tutorial:
1. No need to put the rom in the root of the sdcard. I, for example, to distinguish the roms, I`ve created a folder "Rom" in the root and put the roms in there.
2. It is not necessary to rename the *. zip file.
When we entered the xRecovery, you can go to "install Custom Zip> zip Choose Custom from sdcard>" Now in my case I a. .. "Roms >........" and I intend to choose
Click to expand...
Click to collapse
thanks for the info..
i forgot we have 2 ways of installing...
reupdate..
fyzm345 said:
thanks for the info..
i forgot we have 2 ways of installing...
reupdate..
Click to expand...
Click to collapse
it`s not a different way.
i think that way would be more simple (for me at least) `couse you can have different roms puted on the same directory without, everytime that you want to install one change his name to default.zip
but...great TUT (clap your hands floks)
Since i haved installed the 2.1 AOSP, my recovery were deleted !
So i install the xrecovery.apk but it doesnt work (don't fin the SD Card), so i paste the 3 files with root explorer but nothing to do... the recovery doesn't work at all =(
Bluewall said:
Since i haved installed the 2.1 AOSP, my recovery were deleted !
So i install the xrecovery.apk but it doesnt work (don't fin the SD Card), so i paste the 3 files with root explorer but nothing to do... the recovery doesn't work at all =(
Click to expand...
Click to collapse
its work actually...
try repeat the paste 3 file and make sure the file is exist..
also when paste make sure u hit the mount r/w button in root explorer..
It says make sure you are 2.1 but I'm not im 1.5...... basically I'm stock X10..... and i want to flash so does it matter if I'm 2.1 or not. Because it doesn't make since that you say make sure your 2.1 but I'm flashing to get 2.1
Tchem said:
It says make sure you are 2.1 but I'm not im 1.5...... basically I'm stock X10..... and i want to flash so does it matter if I'm 2.1 or not. Because it doesn't make since that you say make sure your 2.1 but I'm flashing to get 2.1
Click to expand...
Click to collapse
hah...
get it...
actually, to make the xrecovery works, u need to use 2.1...
u can try this flashing tool and reflash your x10 into version 2.1 1st..
http://forum.xda-developers.com/showthread.php?t=825201
after flash finish, then u follow the step at this thread...
*credit to Bin4ry for the tool and link...
Ahhhhh so that's what I'm doing wrong. But I'm already rooted so can I flash as you say even after I'm rooted and everything will work smoothly?
Tchem said:
Ahhhhh so that's what I'm doing wrong. But I'm already rooted so can I flash as you say even after I'm rooted and everything will work smoothly?
Click to expand...
Click to collapse
yeah...
lets fix it..
u already mess the guide actually...
so let start over again...
make sure u flash ur phone into 2.1...
did u already flash into 2.1??
No I have to wait till my wife gets home she has the phone with her. I'm working out the prelimerarys so when she gets home I can jump right into it.
Tchem said:
No I have to wait till my wife gets home she has the phone with her. I'm working out the prelimerarys so when she gets home I can jump right into it.
Click to expand...
Click to collapse
okay...
u need to flash it to 2.1...
after that, u can follow tutorial from this thread...
since my country is almost 2 a.m, i cant help u for this moment..
i will catch up with u tomorrow...
Just wondering
Hey guys
well i was trying to install 2.1 ASOP, but i notice that i cant do it because i have the dual boot to 2.2.1
Do you guys have a solution so i can use all 3?? or should i just reflash my phone to enjoy 2.1 ASOP or should i stay with my dual boot and play with froyo??
Marazao said:
Hey guys
well i was trying to install 2.1 ASOP, but i notice that i cant do it because i have the dual boot to 2.2.1
Do you guys have a solution so i can use all 3?? or should i just reflash my phone to enjoy 2.1 ASOP or should i stay with my dual boot and play with froyo??
Click to expand...
Click to collapse
Install all 3?! Yes you can...if you want you can install WM and iOS
Now mre seriously.
If you want to install 2.1 you have to format sdcard to one partition only. 2.1 doesn't work with more than 1.
Then you can flash...follow this guide to do so
Sent from my Xperia AOSP using XDA App
I want to recover my x10!! It stays on boot screen of Eternity build 002!!!!! PC companion dont work. Anyone that help me will have his name in my signature in big!! PLEASE!!!
PlayGunsta said:
I want to recover my x10!! It stays on boot screen of Eternity build 002!!!!! PC companion dont work. Anyone that help me will have his name in my signature in big!! PLEASE!!!
Click to expand...
Click to collapse
reinstall trhough SEUS?!
+1
thanks for the easy guide.
is there any way how to upgrade without using usb???
I have everything installed minus custom rom, I'm hesitant because I'm running different firm ware does this matter. I see most custom are .204 and mine is like .506, I'm running a Rogers x10a I do believe. Any suggestions is greatly appreciated.
Sent from my X10a using XDA App
i sold my old samsung vibrant, and i had like 200 apps on it. I just buy a new one today, and i wonder is there a way that i can have all my app from the old one to my new one...Thank you....
Did you save a copy of titanium backup on your pc?
if not, no. Your paid apps, yes.
i think i didnt, but i had titanium back up on my old phone before...and can u pls show me how to copy the titatinum back up to my pc.
connect via usb
mount
browse on pc to find sdcard/titaniumbackup
move folder to desktop so you have a copy.
s15274n said:
connect via usb
mount
browse on pc to find sdcard/titaniumbackup
move folder to desktop so you have a copy.
Click to expand...
Click to collapse
Will this method work if you get a different device? Say downgrading from a Vibrant to a MT4G?
Sent from my SGH-T959 using XDA App
I've never tried with my other phones, see no reason why not though.
Thank you so much...
by the way, i forgot how to flask a custom rom at the first time...i got my phone rooted, and downloaded the rom manager...downloaded the custom rom zip file to sd card, then go to rom manager to flash it but it didnt work...Do i have to rename that zip file to update.zip????
ali129 said:
by the way, i forgot how to flask a custom rom at the first time...i got my phone rooted, and downloaded the rom manager...downloaded the custom rom zip file to sd card, then go to rom manager to flash it but it didnt work...Do i have to rename that zip file to update.zip????
Click to expand...
Click to collapse
From rommanager flash clock work recovery then boot into recovery and find the zip and flash
Sent from my SGH-T959 using XDA App
Yes rename the zip file to update.zip but that should have already been done when you rooted your phone.
^ no. you never rename a rom.
Flash cwr
Reboot into cwr
Install zip from sd
Check out the noob guide (signature) for much more detail and steps.
You can do it from rom manager, but cwr still needs to be flashed.
So, I've used Revolutionary to S-off and root, but now there's a system update (I assume for the security vulnerability that was found a week or two ago). I'd like to install this update, but it just fails when I try... Does anyone know how to turn it into a flashable zip, or will I have to un-s-off/root, update, then re-s-off/root?
A hotfix for the vulnerability is not out yet - you tought HTC is that fast But if you can find it you can remove /system/app/HtcLoggers.apk from your rooted Flyer (with an app like File Expert that can mount partitions like /system).
Since you are still stock you might have been offered an incremental update, but I guess soon you will want to flash a custom ROM that already includes it anyway.
Lucas0511 said:
A hotfix for the vulnerability is not out yet - you tought HTC is that fast But if you can find it you can remove /system/app/HtcLoggers.apk from your rooted Flyer (with an app like File Expert that can mount partitions like /system).
Since you are still stock you might have been offered an incremental update, but I guess soon you will want to flash a custom ROM that already includes it anyway.
Click to expand...
Click to collapse
It appears there's a new update today, and it's only about 4.5 megs - I think HTC may actually be that fast
I really don't want to install a ROM, I just want stock with root (to help with development)... Any suggestions appreciated!
To answer my own question, I downloaded the OTA on the device, then I used adb to copy it to my computer (it's in /sdcard/downloads/). I edited the zip so that it wouldn't flash the recovery (there's a recovery.img in firmware.zip inside the OTA zip - remove it), copied it to the external SD card, then flashed it via ClockworkMod (it won't update via the HTC updater).
Something to make sure of, you MUST be running stock - it patches files rather than reinstalls them, so this will fail if there are any differences. This includes build.prop. You can make any changes you like after flashing of course.
Don't forget to backup before doing anything of course! Another warning, ClockworkMod fails silently if your SD card doesn't have enough room for the backup, so make sure you have plenty of space beforehand too!
Hope this helps someone.
Cwiiis said:
To answer my own question, I downloaded the OTA on the device, then I used adb to copy it to my computer (it's in /sdcard/downloads/). I edited the zip so that it wouldn't flash the recovery (there's a recovery.img in firmware.zip inside the OTA zip - remove it), copied it to the external SD card, then flashed it via ClockworkMod (it won't update via the HTC updater).
Something to make sure of, you MUST be running stock - it patches files rather than reinstalls them, so this will fail if there are any differences. This includes build.prop. You can make any changes you like after flashing of course.
Don't forget to backup before doing anything of course! Another warning, ClockworkMod fails silently if your SD card doesn't have enough room for the backup, so make sure you have plenty of space beforehand too!
Hope this helps someone.
Click to expand...
Click to collapse
Removing the recovery.img? I've rezipped everything and it's only 510kb now, surely that cant be it?
Recovery.img's are large files it was just a minor updat to probably fix a couple internal things nothing major. It was a small file at 4mb already.
Hy
Can you please upload the edit-update?
Thanks
ric242 said:
Hy
Can you please upload the edit-update?
Thanks
Click to expand...
Click to collapse
Will do once i'm home!
adaimespechip said:
Will do once i'm home!
Click to expand...
Click to collapse
Thanks! Might be able to make it into a flash able zip.
Cwiiis said:
To answer my own question, I downloaded the OTA on the device, then I used adb to copy it to my computer (it's in /sdcard/downloads/). I edited the zip so that it wouldn't flash the recovery (there's a recovery.img in firmware.zip inside the OTA zip - remove it), copied it to the external SD card, then flashed it via ClockworkMod (it won't update via the HTC updater).
Something to make sure of, you MUST be running stock - it patches files rather than reinstalls them, so this will fail if there are any differences. This includes build.prop. You can make any changes you like after flashing of course.
Don't forget to backup before doing anything of course! Another warning, ClockworkMod fails silently if your SD card doesn't have enough room for the backup, so make sure you have plenty of space beforehand too!
Hope this helps someone.
Click to expand...
Click to collapse
Thanks for the helpful guidelines...
Just a quick question and pardon me since I am a newcomer to Android universe. What do You mean when You say stock?
Thanks again...
BTY
HTC_Flyer / Revolutionary / CWM
My buddy rooted my phone last year and flashed cyanogenmod 7.1.1. My bluetooth piece will not connect to my phone and I'm thinking I need to flash a new rom.
I have no idea how to do this. I tried to read up on stuff like adb and sdk.
I could really use some serious guidance on how to update my rom.
I'm running Android 2.3.7 with Cyanogenmod 7.1.1.
Can I install any type of mod, now? Like Sense?
I hope I am posting this in the proper place.
Thank you
This needs to be moved to q and a. Anyhow, you can now flash other roms. There is a guide posted somewhere im sure. Just google thunderbolt Rom flashing guide or something like that.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
This needs to be moved to q and a. Anyhow, you can now flash other roms. There is a guide posted somewhere im sure. Just google thunderbolt Rom flashing guide or something like that.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
How do I move this to Q and A?
And I can run any other type of ROM? Would I have to re-download rom manager and all that? I've been reading up on titanium backup. So I really just download the file to my SD card then delete data/dalvik then reboot to recovery and install new rom there? There redownload titanium and do a restore?
Kdeli said:
How do I move this to Q and A?
And I can run any other type of ROM? Would I have to re-download rom manager and all that? I've been reading up on titanium backup. So I really just download the file to my SD card then delete data/dalvik then reboot to recovery and install new rom there? There redownload titanium and do a restore?
Click to expand...
Click to collapse
http://rootzwiki.com/index.php?/topic/4405-[FAQ]v1.4-Thunderbolt-Noob-Starter-Guide/How-To/OC-guide-(updated-9/21)
Sent from my ThunderBolt using Tapatalk 2
0dBu said:
http://rootzwiki.com/index.php?/topic/4405-[FAQ]v1.4-Thunderbolt-Noob-Starter-Guide/How-To/OC-guide-(updated-9/21)
Sent from my ThunderBolt using Tapatalk 2
Click to expand...
Click to collapse
Thank you much. I will read, then re-read this, then ask any questions I may have.
Have a great Monday!
What I really need is the ability to use my blue tooth headsest. Do I have to flash a whole new ROM for this? Or should I flash a radio?
I've been reading up on flashing a new rom but am still confused. Do I need to flash the rom THEN flash an RUU (radio?). How about kernels?
I'm worried that I would have issues with the small things...like clearing/formatting my data/dalvik.
Also, how do I add my Radio/RUU to the "Root" of my SD card?
And can anyone clarify how to verify M5sum? I have a program downloaded for it, but don't know how to use it.
First off radios and ruus are two different things. The radio does need to be on the root of the sd card to be flashed. It doesn't really matter if you flash the radio before or after because that won't change between flashes. I find the best way to do it is just download the radio using the phone. Browse with a root file explorer like es file explorer to the download folder, rename the file to PG05IMG.zip, copy, paste it one folder back (that's the root directory). After you flash it in the bootloader browse to the file and rename it.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
First off radios and ruus are two different things. The radio does need to be on the root of the sd card to be flashed. It doesn't really matter if you flash the radio before or after because that won't change between flashes. I find the best way to do it is just download the radio using the phone. Browse with a root file explorer like es file explorer to the download folder, rename the file to PG05IMG.zip, copy, paste it one folder back (that's the root directory). After you flash it in the bootloader browse to the file and rename it.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the reply. I'll download a root file explorer. How should I download a radio on my phone?
Do you think the radio is the issue with my bluetooth not working?
Thanks again.
I have an 8gb nook tablet that I rooted probably 2 and a half years ago and haven't changed anything on it since. I am wanting to undo and update to current root and flash a 4.4 rom like on my phone. What is the best way to go about this? I know how to unroot, I just need to know the best way to root currently. Thanks.
Custom ROMs like CM comes with built-in root capability, and moreover once installed replaces completely the existing ROM currently in place (be it stock ROM, rooted stock ROM, or another custom ROM). As such, there is no need to root (or re-root) prior to flashing a custom ROM. See http://forum.xda-developers.com/showthread.php?t=2575489 for more background info and pointers.
Cool, thanks for the reply and links. I have some reading to do.
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Will your guide for Installing CM10.1 Internally on Nook Tablet work for the 8gb model also? Will it work for CM11 also?
ryknow27 said:
Will your guide for Installing CM10.1 Internally on Nook Tablet work for the 8gb model also?
Click to expand...
Click to collapse
Yes.
Will it work for CM11 also?
Click to expand...
Click to collapse
It should work (with the usual caveat YMMV). Flashing CM11 requires CWM version 6.0.4.5 or later, or TWRP version 2.6.3.0 or later (in step 2(b) of http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123); you can find the SD version of TWRP 2.6.3.x at http://techerrata.com/browse/twrp2/acclaim. You also need a recent Gapps version corresponding to the CM11.
Alternatively, if your NT is already on CM10.x (as my NT was), you can:
download CM11 ROM and the corresponding Gapps zip files onto your NT (user content media partition).
use SD based recovery to flash a flashable emmc CWM zip (http://forum.xda-developers.com/showpost.php?p=48855275&postcount=2) or flashable emmc TWRP zip (http://forum.xda-developers.com/showpost.php?p=49111924&postcount=8) into emmc.
remove SD then boot onto emmc recovery (which is installed in step 2) and use it to install the ROM and Gapps zip files downloaded in step 1.
Remember to use SD based recovery to backup your current ROM before flashing CM.
I need help once again. In step 2a. of Installing CM10.1 Internally on Nook Tablet, I do not see the boot.zip with the 3 files needed and I am not sure how to extract them from the .img file from the pre-made SDcard images. I've only used linux like once and that was to root my Droid DNA. Thank you for your patience with me.
Nevermind...I found a Linux Reader program that let me extract them.
Thanks again.
ryknow27 said:
I need help once again. In step 2a. of Installing CM10.1 Internally on Nook Tablet, I do not see the boot.zip with the 3 files needed and I am not sure how to extract them from the .img file from the pre-made SDcard images. I've only used linux like once and that was to root my Droid DNA. Thank you for your patience with me.
Nevermind...I found a Linux Reader program that let me extract them.
Thanks again.
Click to expand...
Click to collapse
For future reference, you can use 7-zip (which is available for windows) to open .img files and extract its content.
digixmax said:
For future reference, you can use 7-zip (which is available for windows) to open .img files and extract its content.
Click to expand...
Click to collapse
I did try 7-zip first and it didn't work. I may have just done something wrong. I'll try it again. Thanks for all the help.