Hello, to everyone. My friend gave me his x10 mini to install miniCM7. After installing minicm7, my friend's x10 mini started rebooting 20 times per 4 hours. I tried to reflash the rom with wiping everything, but no difference. Please help.
Mrakoris/ said:
Hello, to everyone. My friend gave me his x10 mini to install miniCM7. After installing minicm7, my friend's x10 mini started rebooting 20 times per 4 hours. I tried to reflash the rom with wiping everything, but no difference. Please help.
Click to expand...
Click to collapse
Well his phone was a virgin to root and custom roms and not like yours I guess?
What rom?
Kernel?
Tried wiping dalvik cache?
Sent from my E10i using xda premium
Mrakoris/ said:
Hello, to everyone. My friend gave me his x10 mini to install miniCM7. After installing minicm7, my friend's x10 mini started rebooting 20 times per 4 hours. I tried to reflash the rom with wiping everything, but no difference. Please help.
Click to expand...
Click to collapse
Can you make sure the rom you installed its all requirement matches with your phone ? like baseband kernel version ?
Before you install any rom. make sure u understand everything........
My suggestion is now flash your phone with any Official or 3rd Party flasher to restore its original state.
All you need is here:
MiniCM7
At the moment:
* The kernel you should use (in conjuncture with flashtool) is nAa-09 (given you have a X10 mini and not a X10 mini pro) with the following Baseband: M76XX-TSNCJOLYM-53404015.
* Then install MiniCM7-2.1.7 from your SD-card (rename it update.zip).
* Remember to wipe Dalvik cache! and flash Google Apps. Don't know if you have to do a factory reset from CWM-Recovery, but i would...
Related
hello sir,
i was on stock 2.1 and did everything as per instructions in the forum and installed froyobread 023c for mini pro and i had it for more than 3 weeks.
then i thought of changing it to sonybread sp3 version.. after installing i got into sony text and it didnot go into the main screen for more than 8 hrs, then again used SEUS to got o stock 2.1, suceeded
then again i tried it installing but the problem waited for 3 hrs.. then to stock 2.1
then i planned of going to froyobread 023f installed it but again rebooting ended up in the same sony ericsson text screen..
and wen the last time i tried, this time it keept rebooting wen sony logo appears but the this time alone i was able to enter CWM but not other in the above installation
i don kno wat to do..
i hav no clue
now iam 2.1
PS : after installing, did factory reset, wipe data cache, wipe battery stats .. for each time i installed like i had installed and came to stock 2.1 for abt 8 times...
can u help me plz... i want to go to sonybread v7 sp3f mobile is u20i x10 mini pro, 2.1.1.A.0
Possible solutions :
Try redownloading the ROM you want again and install it.
Try FlashTool to flash the firmware. Search with xda's search engine the following :
2.1.1.A.0.6 GREEK .ftf
It has full guide and included all files you want.
P.S. You don't need to wipe all this, especially Battery Stats, which need wipe only for calibrating battery. Make only Factory Reset/Full wipe.
Sent from my U20i using XDA Premium App
leajian said:
Possible solutions :
Try redownloading the ROM you want again and install it.
Try FlashTool to flash the firmware. Search with xda's search engine the following :
2.1.1.A.0.6 GREEK .ftf
It has full guide and included all files you want.
P.S. You don't need to wipe all this, especially Battery Stats, which need wipe only for calibrating battery. Make only Factory Reset/Full wipe.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
iam now running in 2.1 stock... but i need answers for wat have happened... any ideas... i downloaded the ROM again and again and tried but nothing really worked
sobhan06 said:
iam now running in 2.1 stock... but i need answers for wat have happened... any ideas... i downloaded the ROM again and again and tried but nothing really worked
Click to expand...
Click to collapse
Check your baseband. If it is .................015, it is normal to have bootloops since the new roms are incompatible with other basebands.
If not, then flash with FlashTool with my guide.
Sent from my U20i using XDA Premium App
Hi guys,
I have my sisters SE x10 mini. I have rooted and it is 2.1 android and also installed xrecovery. When I install any custom ROM like GingerDX or MiniCM7 and then reboot, i go into a looping of the SONY ERICSSON logo and never go into the ROM. But lucky i have taken a back up of the previous stock ROM and I am able to enter the xrecovery and restore back. I have tried several ROMS like SROM too and same result. Please help.
When you installed them, do a factory reset in xrecovery then reboot
Sent from my U20i using xda premium
abinavcs said:
Hi guys,
I have my sisters SE x10 mini. I have rooted and it is 2.1 android and also installed xrecovery. When I install any custom ROM like GingerDX or MiniCM7 and then reboot, i go into a looping of the SONY ERICSSON logo and never go into the ROM. But lucky i have taken a back up of the previous stock ROM and I am able to enter the xrecovery and restore back. I have tried several ROMS like SROM too and same result. Please help.
Click to expand...
Click to collapse
To install ROM GinggerDX you have to install it through CMW Recovery, not Xrecovery.
to install MiniCM7, you must unlock bootloader and flash kernel nAa before instal the ROM.
for more details please read the installation instructions on thread ROM.
sorry for my bad English
HI evryone,
I am just a beginner using android for few months... My device is Xperia X10 Mini pro U20i..
I tried to upgrade to MIniCM9 3.0.1 from CM7 (CM7 was working wel, i just wanted to upgrade)..
I downloaded MiniCM9-3.0.1 [5/5/12]ICS 4.0.4/CM9 from http://forum.xda-developers.com/showthread.php?t=1636501
I wiped cache, user data and dalvik cache n tried to install CM9 rom.. It installed successfully, but I received a warning message. 'Should have kernel flashed to atleast ics-nAa 01' like dat...
But when i rebooted, it didnt go beyond d Sony Ericsson logo.. I went back to stock 2.1 using SEUS..
Then I rooted mobile using SuperOneClick 1.6.5 n rooted successfully. But wen i flashed the kernel 'U20_nAa-ics_01_2.6.29.6-nAa-ics-01.ftf' or 'U20_nAa-ics_01_2.6.29.6-nAa-ics-02.ftf' from http://forum.xda-developers.com/showthread.php?t=1636504, it couldnt flash.. I get an error ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"..
I tried flashing with flashtool 0.2.9.1 and with flashtool 0.7.1.0 but i couldnt get it done..
Can anyone help me with dis? Why do i receive dat error message? How can I upgrade to CM9??
While upgrading to CM7, I never flashed my device. I just rooted it, installed xrecovery n cleared factory data, disk cache, dalvik cache n installed d rom... So, is there any similar way to install CM9 also without using flashtool?
Thanks..
You need a custom kernel for MiniCM9, and the reason you can not flash this kernel is because your bootloader is locked. In the kernel thread there is a link to the tutorial on unlocking your bootloader, but please be careful, it doesn't work for everyone
Thanks for dat...
Is there a way we can install CM9 on U20i without unlocking bootloader?
Also, plz tell, does SEUS work after unlocking bootloader?
No you can't install MiniCM9 on anything other than the nAa-ICS kernel, and for that you need an unlocked bootloader
Yes, seus or pc companion will still work with an unlocked bootloader. the worst that can happen when unlocking the bootloader is that you will lose the ability to use your phone as a phone (disabled radio-capabilities). Check if it still works before flashing a kernel and custom rom, if it doesn't relock the bootloader and stay on stock kernel.
How to relock Bootloader? Link for U20i Stock Kernel..
Oh. Thanks a lot..
How to relock bootloader? I saw in a forum somewhere that there s no way to relock bootloader..
Also I tried to download the stock kernel for U20i from this page: http://forum.xda-developers.com/showthread.php?t=1254225... They have given the link for downloading the stock kernel as http://db.tt/ukt80PBn
But the link doesnt work. I have searched many times but could neither open it nor find alternative link.. Can u plz tell any alternative link for it?
Thanks so much for ur responses..
First of all, you can relock your bootloader using S1Tool (by pressing the restore button), but if it is succesfully unlocked there is no need to relock it at all, unless you need to take it back to the shop for repairs under warranty.
(I can't remember where i got the latest version of S1tool from, i'll search for it later if you need it)
as far as the stock kernel is concerned, just do a repair with pc companion or maybe seus, i usually use pc companion. it won't relock your bootloader but will install a fresh stock kernel and rom. After that you can root, install recovery or cwm whatever you used and restore the backup you hopefully made of your MiniCM7 rom.
Mind you: At this moment Minicm9 is not an upgrade yet in the sense that it will make your phone work better or easier, it's still very early in development and not that easy to get working well, if you need your phone on a day-to-day basis, stick with MiniCM7 for now.
Thanks a lot for that info..
I hav no complaints wid CM7. I just wanted to upgrade to ICS since it is out there.
I'll try unlocking bootloader n cm9. I'll go back to cm7 if it doesnt work or if it isnt suited for day-to-day operations..
Thanks so mch for ur help.. I ve understood a lot.. Thanx again.. :-D
If u find d link for S1tool, kindly post it..
Sent from my U20i using XDA
S1Tool with Restore button
Good luck, i hope everything works fine for you
I unlocked d bootloader, flashed n installed d MiniCM9 rom...
It works fine.. ICS is awesome..
Thank u 4 all ur help
Happy days then Have fun...
x10 mini pro 2.1 to Gingerbread (MiniCM7)
sjoedanny said:
I unlocked d bootloader, flashed n installed d MiniCM9 rom...
It works fine.. ICS is awesome..
Thank u 4 all ur help
Click to expand...
Click to collapse
hi
I was checking xda forum for upgrading my x10 mini pro to gingerbread version and I am really confused with the whole process. At present I rooted my phone with superone click and confused with next steps. do i need to unlock bootloader ? do i need to flash with Naa kernel ? Some guides instructing to install minicm7 without unlock bootloader and kernel flash.which correct or good ? I dont know what to do and I dont want to brick my phone too. Please help me and thank you very much for ur time
shane64 said:
hi
I was checking xda forum for upgrading my x10 mini pro to gingerbread version and I am really confused with the whole process. At present I rooted my phone with superone click and confused with next steps. do i need to unlock bootloader ? do i need to flash with Naa kernel ? Some guides instructing to install minicm7 without unlock bootloader and kernel flash.which correct or good ? I dont know what to do and I dont want to brick my phone too. Please help me and thank you very much for ur time
Click to expand...
Click to collapse
If you want to run MiniCM7, by nAa, you need to unlock your bootloader and flash the nAa GB kernel (currently at version 13).
If you want to run MiniCM7Pro, you can run it without a custom kernel and without unlocking your bootloader.
They are two different ROMS with almost the same name, i can understand why that can be a bit confusing
MiniCM7Pro
Thank you very much SmG67, for your fast and valuable reply. Am a newbie here and I am trying to learn the things.Your information is really cleared my fear about bricking. I have few doubts to share with you sir,
What is the main difference between minicm7 and minicm7pro ?
If I opt minicm7pro now, then Can I upgrade or install minicm9 later ?
Minicm7pro by Bpaul is not giving any instruction for how to install it. So where can I get the instructions
SmG67 said:
If you want to run MiniCM7, by nAa, you need to unlock your bootloader and flash the nAa GB kernel (currently at version 13).
If you want to run MiniCM7Pro, you can run it without a custom kernel and without unlocking your bootloader.
They are two different ROMS with almost the same name, i can understand why that can be a bit confusing
Click to expand...
Click to collapse
shane64 said:
Thank you very much SmG67, for your fast and valuable reply. Am a newbie here and I am trying to learn the things.Your information is really cleared my fear about bricking. I have few doubts to share with you sir,
What is the main difference between minicm7 and minicm7pro ?
If I opt minicm7pro now, then Can I upgrade or install minicm9 later ?
Minicm7pro by Bpaul is giving any instruction for how to install it. So where can I get the instructions
Click to expand...
Click to collapse
Minicm7Pro was a port to the x10mini-pro from early MiniCM7 for the x10-mini, but it got updated to the latest Gingerbread, while still working with the stock kernel, minicm7 was released later and moved to the nAa-custom kernel, which gave it some performance benefits.
If you can unlock your bootloader, you can flash any kernel and rom you like that is available for your phone, but MiniCM7Pro or ArcMini Nxt (which runs on just about any kernel) are good places to start anyway.
for installing MiniCM7Pro you need:
2.1.1.A.0.6 firmware with *4015 baseband (check Settings - About Phone, the baseband should end in 4015)
Rooted phone
ClockWorkMod Recovery
Copy the MiniCM7Pro zip to your sd-card
Boot into CWM (press back-button on the kernel-logo)
Do a backup
Install the ROM
Wipe factory-data/reset
Wipe Cache
Wipe Dalvik-Cache (in CWM advanced)
Wipe Batttery Stats (in CWM advanced)
Reboot and enjoy
MiniCM7Pro
Thank you very much, and I am now looking into how to install it on my device.Because minicm7pro thread is not giving any step by step instruction to install it. I am really appreciating your help. Good day
@ SmG67
Thank you very much for your advice's and I upgraded my x10 mini pro to android 2.3.7 ( cm7 pro) . I really appreciating your help on this regard. I was out of station for a while,and that's the reason for this late reply.My phone is working without any problem except wifi hotspot, It will show turning on and continue that status without actually turning it on when I am trying to enable it.Although its not a big headache or function for me.so its okay.Once agin thanks.Good day
MiniCM 7 pro to ICS
@ SmG67
hi... My x10 mini pro running on Minicm7 pro by paul and stock kernel.I installed it according to your advice and I appreciating your helping words. Now I would like to move to ICS rom and nAa kernel. I have few doubts regarding installation.
1. Do I need to go back to old 2.1 factory ROM before flashing ics and ics nAa kernel ?
2. If yes, How can I install old SE rom ?
3. Can I install MiniCm9 over JB nAa kernel ? because it will reduce my job when am moving to ics to JB rom
Thx
shane64 said:
@ SmG67
Thank you very much for your advice's and I upgraded my x10 mini pro to android 2.3.7 ( cm7 pro) . I really appreciating your help on this regard. I was out of station for a while,and that's the reason for this late reply.My phone is working without any problem except wifi hotspot, It will show turning on and continue that status without actually turning it on when I am trying to enable it.Although its not a big headache or function for me.so its okay.Once agin thanks.Good day
Click to expand...
Click to collapse
shane64 said:
@ SmG67
hi... My x10 mini pro running on Minicm7 pro by paul and stock kernel.I installed it according to your advice and I appreciating your helping words. Now I would like to move to ICS rom and nAa kernel. I have few doubts regarding installation.
1. Do I need to go back to old 2.1 factory ROM before flashing ics and ics nAa kernel ?
2. If yes, How can I install old SE rom ?
3. Can I install MiniCm9 over JB nAa kernel ? because it will reduce my job when am moving to ics to JB rom
Thx
Click to expand...
Click to collapse
1. No
2. 1 was a no, so no need for that
3. No, it won't work.
For 2011 devices line, be sure you are not in MTP mode
Thank you SmG67....I checked my device with s1tool and found " SEMC SIMLOCK CERTFICATE " then forwarded to flash tool. But I faced an issue and my flashing halted. When I am connecting my phone it will detect and showing INFO : For 2011 devices line, be sure you are not in MTP mode ....then going to charging mode....Dont know whats the reason ? :crying:
For your info : I installed all x10,x8,x10 mini pro ADB drivers, fastboot drivers, Flashmode drivers etc. USB debugging is ON, unknown sources is enable......my flashtool version was 0.6.8.0 .
SmG67 said:
1. No
2. 1 was a no, so no need for that
3. No, it won't work.
Click to expand...
Click to collapse
shane64 said:
Thank you SmG67....I checked my device with s1tool and found " SEMC SIMLOCK CERTFICATE " then forwarded to flash tool. But I faced an issue and my flashing halted. When I am connecting my phone it will detect and showing INFO : For 2011 devices line, be sure you are not in MTP mode ....then going to charging mode....Dont know whats the reason ? :crying:
For your info : I installed all x10,x8,x10 mini pro ADB drivers, fastboot drivers, Flashmode drivers etc. USB debugging is ON, unknown sources is enable......my flashtool version was 0.6.8.0 .
Click to expand...
Click to collapse
Our phone is 2010 device so don't worry about the mtp mode thingy
Your lfashing halted because you didn't unlock your bootloader yet.
Connect your phone to flashtool
Choose Únlock bootloader' in the plugins menu
Follow Instructions
Flash the kernel
You should be fine
I recently installed LWW rom on my mini by mistake, now its touchscreen is not responding. wat do?
How about flashing a custom kernel with cwm (flash again if you already have one) , remove memory card, don't try to boot into the Rom! Just boot into cwm wipe everything! (cache/dalvik/data/system/batterystats) literally wipe everything you could wipe . Then flash the generic firmware for your phone. I think that should do the trick.
If it didn't work the below thread might give you some idea
http://forum.xda-developers.com/showthread.php?t=1927058
hit thanks if I've helped!
sent from my smultron
you can do this to fix your touch....
flash an stock 2.3.4 firmware..
flash a "ported rom"on your device
flash stock firmware again
metalrawk said:
I recently installed LWW rom on my mini by mistake, now its touchscreen is not responding. wat do?
Click to expand...
Click to collapse
hey are that 'shapshifter' guy from se-nse right...
as i told follow that tut...
the same problem happened to my friend 'shprakash' he followed every thing in that tut..but it didnt work..
finally ended up replacing the digitizer ...which is around 2000INR
hi! I have x10 mini e10i and want to install custom rom even if its just running on 2.2 or 2.3.
My phone is 2.1-update 1, rooted, cwm installed but locked bootloader.
I can see some post that you can install custom rom on locked bootloader and stock kernel
Can someone make a "NEW" tutorial on how to install custom rom on locked bootloader on x10 mini e10i (not pro).
Thanks.
jhun12 said:
hi! I have x10 mini e10i and want to install rom. My phone is 2.1-update 1, rooted, cwm installed but locked bootloader.
I can see some post that you can install custom rom on locked bootloader and stock kernel
Can someone make a "NEW" tutorial on how to install custom rom on locked bootloader on x10 mini e10i (not pro).
Thanks.
Click to expand...
Click to collapse
Please use SE tweaker tool to root and install CWM Recovery. SE Tweaker tool (also works on X10 mini): http://forum.xda-developers.com/showthread.php?t=1462278
Then restart your phone and press the back button repeatedly to boot into CWM Recovery. Wipe data/factory reset then flash the ROM that you want.
reply
rootdefyxt320 said:
Please use SE tweaker tool to root and install CWM Recovery. SE Tweaker tool (also works on X10 mini): http://forum.xda-developers.com/showthread.php?t=1462278
Then restart your phone and press the back button repeatedly to boot into CWM Recovery. Wipe data/factory reset then flash the ROM that you want.
Click to expand...
Click to collapse
but im already rooted and have cwm recovery installed. Is that is another way of installing custom rom on locked bootloader?
jhun12 said:
but im already rooted and have cwm recovery installed. Is that is another way of installing custom rom on locked bootloader?
Click to expand...
Click to collapse
You have to use a ROM that supports the stock kernel. So all you do is download a ROM zip and flash CWM Recovery. An example is http://forum.xda-developers.com/showthread.php?t=1201116 It should work on X10 Mini BTW.
reply
I finally installed cm6 on my phone. But i still have problem. It always restarting after the sony ericsson text (not the logo) but sometimes it can open 'til the homescreen but still it will shut down automatically.
I tried pc companion but when i try to connect my phone, its just restarting all over. I thought if I would install a custom rom, it will repair the phone.
What's the difference between flashing the phone via pc companion and installing custom rom via cwm recovery?
jhun12 said:
I finally installed cm6 on my phone. But i still have problem. It always restarting after the sony ericsson text (not the logo) but sometimes it can open 'til the homescreen but still it will shut down automatically.
I tried pc companion but when i try to connect my phone, its just restarting all over. I thought if I would install a custom rom, it will repair the phone.
What's the difference between flashing the phone via pc companion and installing custom rom via cwm recovery?
Click to expand...
Click to collapse
PC companion flashes stock ROM while CWM is used for flashing custom ROMs. I suggest you to use flashtool to flash a stock ROM
reply
i thought if i will replace the old system, it will be fixed.
jhun12 said:
i thought if i will replace the old system, it will be fixed.
Click to expand...
Click to collapse
Flashing the 2.1 FTF with flashtool will reset your whole phone and it should fix your problem. If it doesn't, it means that you have a hardware problem.
can you give me a link of 2.1.1.A.0.6 tft for e10i?
jhun12 said:
can you give me a link of 2.1.1.A.0.6 tft for e10i?
Click to expand...
Click to collapse
Sorry I can't find one. All of them have seem to be deleted
EDIT: Found one: http://www.4shared.com/file/MBqMiM6W/E10i_android_21_updae_1_sridro.html
Just make a random account and you don't need to validate your email address at all.
thanks
me too, i can't find one. thanks for the link.
How about flashtool for x10 mini?
Hope it will fix.
jhun12 said:
me too, i can't find one. thanks for the link.
How about flashtool for x10 mini?
Hope it will fix.
Click to expand...
Click to collapse
Flashtool: https://unrestrict.li/flashtool
reps
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
jhun12 said:
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
Click to expand...
Click to collapse
I can't find one anymore. Just use the one I gave you on 4shared.
jhun12 said:
can you help me to find a flashable stock 2.1.1.A.0.6 for e10i. Thanks again.
Click to expand...
Click to collapse
Here
reps
SmG67 said:
Here
Click to expand...
Click to collapse
uhm, do you have a link of stock 2.1.1.A.0.6.zip rom which i can use on cwm recovery. or can i use 2.1.1.C.0.0 rom on 2.1.1.A.0.6. I just want to try if it will be fix my phone.
rootdefyxt320 said:
I can't find one anymore. Just use the one I gave you on 4shared.
Click to expand...
Click to collapse
i tried to search there but no luck.
jhun12 said:
uhm, do you have a link of stock 2.1.1.A.0.6.zip rom which i can use on cwm recovery. or can i use 2.1.1.C.0.0 rom on 2.1.1.A.0.6. I just want to try if it will be fix my phone.
Click to expand...
Click to collapse
You can use the 2.1.1.C.0.0 ROM. It was an update for the x10 mini pro in certain areas, but it will run on the x10 mini too, since there is no hardware specific stuff in the ROM itself. You will probably lose root and cwm though when you flash it.
I've got an 'undressed' 2.1.1.A.0.6 I made for myself in zip-format which includes root and cwm, but i took out all the google stuff, so there's no market in it.
If you want to know if your phone is ok, just wipe everything and install the 2.1.1.C.0.0.
SmG67 said:
You can use the 2.1.1.C.0.0 ROM. It was an update for the x10 mini pro in certain areas, but it will run on the x10 mini too, since there is no hardware specific stuff in the ROM itself. You will probably lose root and cwm though when you flash it.
I've got an 'undressed' 2.1.1.A.0.6 I made for myself in zip-format which includes root and cwm, but i took out all the google stuff, so there's no market in it.
If you want to know if your phone is ok, just wipe everything and install the 2.1.1.C.0.0.
Click to expand...
Click to collapse
can you upload it?
2.1.1.A.0.6
Can't find the 2.1.1.C.0.0 anymore