Related
hey guys, been here since the launch of evo. rooting, flashing, everything.
today i wanted to switch roms. so i went about my normal process...
d/l new ROM
backup current ROM
backup apps
wipe cache and dalvic
flash new ROM
i got stuck on the last step. i went to flash the new ROM (nocturnal 1.3)
it said something along the lines of blah blah is already unmounted. i didnt pay too much attention to it because i was going to restart and try again. long story short, it will only boot to htc white screen and nothing else.
can anyone help me out?
p.s. im on clockwork recovery
PLEASE CLOSE
did you not wipe system and data? I am not super skilled, but maybe it tried to stick the entire ROM into the left over space of the last ROM that is still on there?
It won't boot to recovery? It should boot to recovery
weezymagic said:
hey guys, been here since the launch of evo. rooting, flashing, everything.
today i wanted to switch roms. so i went about my normal process...
d/l new ROM
backup current ROM
backup apps
wipe cache and dalvic
flash new ROM
i got stuck on the last step. i went to flash the new ROM (nocturnal 1.3)
it said something along the lines of blah blah is already unmounted. i didnt pay too much attention to it because i was going to restart and try again. long story short, it will only boot to htc white screen and nothing else.
can anyone help me out?
p.s. im on clockwork recovery
Click to expand...
Click to collapse
The error message you received is going to be the key to understanding the issue that occured. When it says unmounted, it is referring to a specific partition, either /data or /system most likely.
For starters, when it hangs on the htc white screen, this is usually either a kernel or ramdisk issue. If the kernel is known to be good, then it is probably a ramdisk issue. most ramdisk issues relate to a mismatch/incompatibility between the loaded kernel and the ROM.
First suggestion would be to reflash the ROM, clearing /cache and /data.
Second suggestion would be to restore a backup. This will confirm there is nothing wrong with your device hardware wise and you'll know it is a specific issue with the ROM you wanted to load.
Third suggestion, find the exact error, word for word, which occured in recovery and post up in the ROM thread asking if other users of that ROM also encountered, how they handled. Also feel free to post back up here.
When writing the programming behind a custom recovery, the error messages are added in there to help allow users and developers better knowledge of the exact issue so they can work to resolve them. Without the exact error message, it is similar to going to a car shop and saying, some light came on my dash, but I don't know what it was and now the car doesn't work. Fix it? Another words, it is very vague.
Hope the suggestions and tips help! Good luck!
my first instinct was to reflash the backup or new rom again but it wont boot to any rom, recovery or bootloader. it just hangs on the htc white screen
idk what happened but i got into the bootloader through battery pull, power+vol down. i know ive tried that in the past but this time it worked. now im restoring a nandroid from yesterday
weezymagic said:
idk what happened but i got into the bootloader through battery pull, power+vol down. i know ive tried that in the past but this time it worked. now im restoring a nandroid from yesterday
Click to expand...
Click to collapse
are you on twrp 1.0.x ? There is s charging issue where it won't restart right because it thinks It's already in recovery
sent from my EVO 3D via XDA app
weezymagic said:
hey guys, been here since the launch of evo. rooting, flashing, everything.
today i wanted to switch roms. so i went about my normal process...
d/l new ROM
backup current ROM
backup apps
wipe cache and dalvic
flash new ROM
i got stuck on the last step. i went to flash the new ROM (nocturnal 1.3)
it said something along the lines of blah blah is already unmounted. i didnt pay too much attention to it because i was going to restart and try again. long story short, it will only boot to htc white screen and nothing else.
can anyone help me out?
p.s. im on clockwork recovery
PLEASE CLOSE
Click to expand...
Click to collapse
You missed a step. After you wipe dalvik and cache, you ALWAYS need to wipe /system and /data, do a factory reset to make sure, or download a superwipe tool. The ONLY time you don't need to wipe completely is when you're updating your ROM, but even then it is recommended to wipe everything.
Twolazyg said:
You missed a step. After you wipe dalvik and cache, you ALWAYS need to wipe /system and /data, do a factory reset to make sure, or download a superwipe tool. The ONLY time you don't need to wipe completely is when you're updating your ROM, but even then it is recommended to wipe everything.
Click to expand...
Click to collapse
Agreed^^^^^
Hello to everyone, I hope someone can help me... I dont know what else to do.
I have SGS2 with
Android 2.3.4
Base Band I9100XXKI1
Kernel 2.6.35.7-I9100XWKI4
Gingerbread.XWKI4
I rooted the phone one week ago, any problem during the process.. Root was fine, I could intall Titanium Backup, Superuser, adfree... etc... NO PROBLEM WITH ROOT
The 2 days ago, screen gone OFF suddenly, then back ON, with full of FC's, and a message with something like "inconsistent Data, full wipe needed"...
Finally phone came normal mode.. I didnt try any wipe because it was working normal... but then I saw that any installation or uninstallation, was back when the phone was rebooted, any change in whatsapp, was gone in the same way...
During the phone is ON, it works fine, but at the moment I reboot, any change has gone.
I tried to do a FULL WIPE, and when I reboot in Recovery Mode (original one, the CWM I didn't Installed) I got this message
Unable to Access /system/csc/FOP/system
I try a wipe, and the phone says WIPE DONE, but when I restart the phone, anything is done... all my programs are there, any change made.
I tried to reinstall CSC "CSC_I9100FOPKG5_HTCMANIA.tar.md5" with Odin, and for Odin everything is perfect, no errors, but it continues all the same.
And *#272#IMEI# But no FOP's listed and I got the message "Must Be THREE Chars"
It's like the "memory phone" is R/O and no change are possible....
It's not saving even call list... ANYTHING
If I delete a file, from the "internal_SD", when I reboot is still there...
I don't know what else to do...
I'll appreciate any kind of help...
Thanks again
Flashing the csc alone won't much. You should reflash the entire ROM.
Sleepycat3 said:
Flashing the csc alone won't much. You should reflash the entire ROM.
Click to expand...
Click to collapse
Finally is the mother board. I sent if, to Samsung SAT
Sent from my HTC Desire using Forum Runner
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Thanks for the reply!
I didn't check the MD5 last night but I did just now and it matches.
I did a cache wipe the first time but not a system wipe. Then I started getting more desperate and tried reinstalling w/ system wipes and factory resets, but it didn't change anything.
No, I didn't change the ROM. Doing the Bootloader unlock exploit was about the absolute maximum of my technical abilities! The only thing I know I did wrong was that I didn't downgrade to the old boot version the first time (mainly because the wifi thing sounded inconsequential and I didn't want to learn the procedure if I didn't have to).
Anyway, I just tried Ultimate KangBang and it seems to work--no error messages so far. I don't know what I did wrong, but hopefully this keeps working!
IceDragon59 said:
Even though it explicitly stated you didn't need to do a backup, I did one anyway, to prevent something like this from happening. Always do a backup.
Did you verify the MD5Sum of ViperLTE?
Did you go to Recovery and Wipe -> Factory Reset and Wipe -> System both twice before trying to install the ROM?
Did you change anything in the ROM before attempting to load it?
There are lots of questions we could ask to ascertain the root of the problem, but these three are among the most important.
Wi-Fi won't work without the old boot.img, and from what I can tell, that's the only thing. It doesn't give critical errors.
Click to expand...
Click to collapse
andybones said:
I'm thinking since you are new to root you were un-aware the need to wipe before installing a rom.
im thinking that is the issue.
Click to expand...
Click to collapse
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
franklin411 said:
Yes, I took a short-cut that didn't quite work out. I didn't want to wipe the system because I wasn't sure if my pictures would be wiped too, but then when everything died I tried wiping everything and reinstalling and it didn't seem to improve anything. I did end up losing my pictures too. Oh well. Maybe it's just a combination of stuff I did to try to get things working (there was some trial and error in unlocking the bootloader but I did get that to work finally, and then more trial and error with the ROMs).
I guess the best thing to do is leave the phone the heck alone as long as it's working, for now. I just don't know why nothing seemed to work--I thought factory reset/fresh ROM would do it.
Click to expand...
Click to collapse
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
in the future it is always good practice to backup(nandroid) your current ROM. I have been burned too many times, always do a nandroid before you do anything in recovery.
your photos are normally saved to the SD, flashing ROMs or wiping the system will not delete them
andybones said:
If UKB ROM works then Viper ROM will too, installing the boot.img is very simple it's one command
I can help you with that if you'd like
in recovery before installing ROM, do a wipe of, (I go in this order, but it doesn't matter.)
1) Factory Reset
2) System
3) Cache
4) Dalvik Cache
then install the ROM
just DO NOT do External storage (unless of coarse u WANT to wipe your SD-Card.)
as long as you don't wipe External Storage you won't lose anything that's on your SD-Card.
Click to expand...
Click to collapse
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
franklin411 said:
It worked this time! Maybe the difference was that the boot.img file I downloaded was called "boot_signed.img" or something. I had no idea what it was supposed to look like, so I installed it that way and it didn't work. Then I tried renaming it to "boot.img" this morning and installing viper, but that didn't work. And then I restarted and installed UKB, and it worked. Just now I wiped and tried again with Viper and it's working fine. Maybe I did something this morning that caused it not to take properly when I tried with Viper, and then I reset and it worked.
Thanks for the help!
Click to expand...
Click to collapse
na the name has nothing to do with it. it can be named whatever.
im guessing the wipe worked.
franklin411 said:
Hi all,
I have a Droid incredible 4g (stock, unrooted/unlocked, w/ the recent OTA update). I saw the Bootloader Unlock exploit in the developer's forum so I gave it a go, and it worked fine. Then I installed the Viper 1.0 ROM, but I haven't been able to get it to do anything after successfully booting except run through a loop of errors such as "Unfortunately, the process android.process.acore has stopped working." After I click "OK" on about 10 critical errors, it self-reboots and does the whole thing again.
Unfortunately, I didn't do a backup this time, so I have nothing to restore (first time I haven't done a backup, but also the first time I've ever had any kind of an issue w/ a ROM). I tried using the HTC Android ROM Update Utility 1.0.5.2011 that I found in the dev forum, but that didn't work either. Finally, I installed 2.17.605.2 Verizon Global Sense4.1 Android 4.0.4. It's a lot more stable than Viper was and the phone is basically usable, but I still get lots of critical errors. So this morning I went back to the forum and saw that I needed to downgrade to the old 1.43.605.3 kernel. I tried that and then reinstalled Viper 1.0, but it seemed to have no effect--still stuck in a critical error/reboot loop.
I realize that's the risk of playing with ROMs and I should have done a backup, but anyone have any ideas on how I can get my phone back and running?
Thanks!
Click to expand...
Click to collapse
weird, i was having the same problem with the same processes stopped working. i wiped cache dalvik and system but not factory reset. once i factory reset, it worked fine. i figured a system wipe would have been enough....
hey there
i hope my phone is not bricked, but i've been looking now for two hours for a solution and haven't found anything.
I have a rooted GT-9100 with jelly bean 4.1.2 XWLS8 official Samsung Rom.
In the last few days i was having problems with many apps, especially the video player and the gallery app, which wouldn't start because there wasn't enough memory (even after having deleted all the trash files and dumpstate files).
as i had not made a data wipe after updating from xwssl to xwls8 (i rooted afterwards, i didn't want to reconfigure everything again), i wanted to make a backup before i would try the data wipe now.
So i made the backup with my Rom Toolbox pro on the sd card, rebooted the phone to recovery mode, wiped the data and rebooted the phone. as always the starter mode wanted me to select the language, which i did and then suddenly the screen went black.
It started to reboot and since then the phone is hanging in the Samsung Logo.
i've tried to wipe data, wipe cache partition, wipe kalvik, no success.
tried to restore from the backup i made this morning, says md5 mismatches.
what now? any suggestions?
kind regards skapo
Sent from my girlfriend's GT-S5830 using xda app-developers app
Back to ICS stock (not 4.0.4) via Odin (Get one from Samfirmware or AndroidFirmwares.net), that will give you a clean slate & you can go from there.
Edit - Or....Search on here for the md5 mismatch thing with your backup. There's been plenty of threads on here over the past 18 mths or so. Not sure if these methods work all the time (or even at all, I've never had the problem so never had to use them), but you might as well find the threads & see if any of the suggestions for fixes work for you. Could save you doing a clean install of stock & starting again (which will obviously be somewhat time consuming).
thx for the fast reply
why ics? isn't jb stable enough?
is there actually a pure rom like the nexus phone for the s2? i was wondering if the touchwiz from samsung might be responsible for so many problems...
Sent from my GT-S5830 using xda app-developers app
Worry about all that once you get the phone working normally again, this should be the only thing you're thinking about right now. First thing's first
yeah, you're right. i'll give it a shot i'll update this post tonight. thx
UPDATE:
Ok, i've reinstalled a ICS 4.0.3 I9100XXLPS, Buildnumber IML74K.XWLP7 (whatever this may be, where is the guide to the structure of Android and all the definitions, can't find any proper introduction).
It seems to work fine, but i had to wipe data and wipe cache partition, otherwise the phone still got stuck in the boot loop.
So what now? I've tested the root access, which of course isn't available anymore after flashing the ICS Stock ROM.
Do i need to install first a JB ROM with root access to (try to) restore from my backup or can i do it right from here rooting the ICS ROM?
Almost Solved
sKapo_daVinci said:
yeah, you're right. i'll give it a shot i'll update this post tonight. thx
UPDATE:
Ok, i've reinstalled a ICS 4.0.3 I9100XXLPS, Buildnumber IML74K.XWLP7 (whatever this may be, where is the guide to the structure of Android and all the definitions, can't find any proper introduction).
It seems to work fine, but i had to wipe data and wipe cache partition, otherwise the phone still got stuck in the boot loop.
So what now? I've tested the root access, which of course isn't available anymore after flashing the ICS Stock ROM.
Do i need to install a JB ROM first with root access to (try to) restore from my backup or can i do it right from here rooting the ICS ROM?
Click to expand...
Click to collapse
OK, i think i've got the problem solved:
The first thing i tried is to root the ICS and restore with the CWM. Interesting that this time it didn't give me any md5 mismatch, but it suddenly stopped during the process and the phone booted normally to ICS, in other words the restore didn't work.
So I downloaded the latest SGS2 JB I9100XWLSJ again (i had that one installed before the whole mess), i thought that the one i had installed before may have been corrupted. I flashed the ROM, wiped data, cache and dalvik cache and rooted the phone with Siyah. From there i tried to restore again, but again it stopped because of the md5 mismatch.
At least the new JB ROM booted successfully, which allowed me to access the backup file in the phone's internal sd with my PC.
I edited the nandroid.md5-file with notepad ++ and the md5 calculator. There's a good instruction from here. The folder distribution from the original instruction is a little bit confusing, that's why i've uploaded another one
I recalculated every md5 number for each file in the backup (except the nandroid.md5-file itseld of course and in some cases the .android_secure.img [i didn't have such a file]) and modified the md5 numbers inside the nandroid.md5-file.
That solved my problem :laugh: I was able to restore from my backup .
Even so, the video player app is still crashing. I restored my files and all the config, but with it the same problems i had before :crying:
Good work on finding a solution & posting it here, I'm sure it will help someone at some point in the future
Re: the FC's with the video player (which one ?), sounds like restoring it/it's settings is causing you problems. You might want to try clearing data on it first - go into settings/apps/all & select the app, then clear data; and if that doesn't work, uninstall it then do a clean install without restoring the app or settings. If the settings were backed up on ICS & you're currently using JB, that may be the cause of the FC's.
sKapo_daVinci said:
I edited the nandroid.md5-file with notepad ++ and the md5 calculator. There's a good instruction from here.
Click to expand...
Click to collapse
Thank you so much for bringing that thread to my notice! Could be useful in the future..:thumbup:
And good work solving it on ur own. XDA needs more guys like u!
If u do manage to solve all ur issues, please add [SOLVED] to the title of ur post, so that others too may benefit from ur solution.
"To err is human, to forgive is divine"
Sent from my SGS II
This will help anyone who keeps having flashing issues.
More detailed instructions in my GUIDE!
http://forum.xda-developers.com/showthread.php?t=2295557
THIS IS ONE QUICK/SIMPLE ERROR FREE ROM FLASHING PROCEDURE
This should eliminate a few posts saying, stuck in download mode, stuck at logo. just vibrates and them MANY other issues that somehow, everyone seems to find.
Here is my quick rom flashing process I use ALWAYS (yes always)
THINGS YOU NEED ON extSDCARD
1. Extra kernels (2 or 3 you know works for your device)
2. Optional: 2 recoveries that can be flashed (I use CWM & TWRP)
3. Optional: apps.zip (a zip created from Titantium BU, containing Root Explorer, TU Backup, Quickpic, ES File Explorer and Terminal Emulator)
Flashing the rom: TOUCHWIZ/AOSP ROMS
1. Backup current rom (to the extsdcard)
2. Complete wipe, (I do complete, some people do not) Complete = No Issues [FACTORY RESET + CLEAR CACHE + CLEAR DALVIK CACHE + CLEAR DATA]
3. Flash the rom
4. Flash the kernel (your device kernel) (I know some roms have their own kernel) this is where your problems start.
AGAIN: FLASH YOUR KERNEL, you KNOW it works. 1 more time FLASH YOUR KERNEL. (you can experiment with other kernels after you boot)
AOSP ROMS - require you to flash gapps before you boot. [This is not required for TouchWiz roms]
5. Boot the rom.
FINISHED!!!! SUCCESS!!!
Total time to flash a rom:
7-10min
Errors - NONE
This goes for every rom in my guide.
TIPS:
This flash procedure is for Touchwiz Roms, if you are flashing AOSP roms, you must flash the gapps package associated with the rom you are flashing.
**** SGH-I337M Users: Often requires flashing a different kernel than the one included in most ATT ROMS. Any GT-i9505 kernel will work and Adam kernel and Faux kernel are both confirmed working for us Canadian users.
Note: Flash KERNEL directly after ROM then reboot device.
[Special thanks to blyndfyre for this helpful tip].
The extra recovery I flash if a rom does not like the recovery I am using.
Yes, you can flash recoveries back and forth.
Apps.zip I flash after the rom is up & running. This I use to get the rom setup (like root explorer and others needed)
I am in no way responsible for anything that may do damage to any device - Use these tips at your own risk - period!
If you found this useful in any way, please hit the THANKS button for my effort.
RESERVED
TheAxman said:
Any questions? Anyone.
Click to expand...
Click to collapse
I've been running into a lot of issues when trying to flash different ROMs. For instance, right now I'm on CleanROM 1.6 - I just tried to install PureGv2.
Steps I took:
Have Goo and ROM Manager installed after clean install of CleanROM 1.6
Flash CWM from ROM Manager
Install Recovery Script from Goo
Reboot into recover from Goo
TWRP loads
Wipe data, cache, dalvik, etc
Install PureGv2
I forget the error off the top of my head but it doesn't install
In a nutshell I'm asking what am I doing wrong? Do I need to flash another kernel?
Flash your verizon kernel. Correct. I know it is a vzn rom, but do it anyway.
TheAxman said:
Flash your verizon kernel. Correct. I know it is a vzn rom, but do it anyway.
Click to expand...
Click to collapse
Was looking through Tomsgt's Youtube channel and stumbled across a video of his that showed his "About Phone". Everything was identical to mine, so I'm still a little lost as to why I can flash certain ROMs but not others. Sac/Gru's ROM soft bricked my phone, Hyperdrive5.7 didn't install, CleanROM does. It's just funky...maybe I'll just Odin back to stock, flash the MDK and start fresh.
Could the downloads be a problem? I downloaded 2 of the ROMs from work today on a 50meg pipe and they didn't work.
Do you download the ROMs to your phone or to your computer and then move them to your SD card?
If you download to your phone, do you move them to the SD card or leave them in the download folder on the internal storage?
If you do the latter, do you use a micro SD adapter or plug the phone in and move them that way?
harrytery said:
Was looking through Tomsgt's Youtube channel and stumbled across a video of his that showed his "About Phone". Everything was identical to mine, so I'm still a little lost as to why I can flash certain ROMs but not others. Sac/Gru's ROM soft bricked my phone, Hyperdrive5.7 didn't install, CleanROM does. It's just funky...maybe I'll just Odin back to stock, flash the MDK and start fresh.
Could the downloads be a problem? I downloaded 2 of the ROMs from work today on a 50meg pipe and they didn't work.
Do you download the ROMs to your phone or to your computer and then move them to your SD card?
If you download to your phone, do you move them to the SD card or leave them in the download folder on the internal storage?
If you do the latter, do you use a micro SD adapter or plug the phone in and move them that way?
Click to expand...
Click to collapse
Download to the computer,then copy to the phones extsdcard, should be ok, make sure you do a md5 check on the files to make sure they are the correct size.
TheAxman said:
Download to the computer,then copy to the phones extsdcard, should be ok, make sure you do a md5 check on the files to make sure they are the correct size.
Click to expand...
Click to collapse
Alright sounds good. Flashing back to stock later today then re-rooting
thanks for the help
Remember always do a BACKUP before you do anything.
First off, big thanks for this thread.
Now I'm running Cleanrom 1.5. If I wanted to install a new rom can someone please explain exactly what I do to go about it? As jargon free as possible would be awesome.
Sent from my SCH-I545
I certainly scared the carp outta me the other night. I'm using the Carbon ROM and while I do like it, I miss a couple of the S4s features. I picked what looked like a good modified stock ROM and proceeded to flash it.
I'm using Goo and TWRP for the job. I checked of all 3 boxes for clearing cache, davik and factory reset.
Then I chose the file and started it.
The first result, it acted like if was doing everything but nothing changed. Phone still worked fine.
On the next try, I waited for TWERP to start and I reselected the ROM I wanted and flashed it.
When it booted up, I was very happy to see the original screens come up. Then it stopped on the one with the Verizon check mark. The blue LED slowly pulsing and nothing else for about 30 min. I removed battery to try and start over. Same thing again.
Time to goto my backup and restore my phone back to Carbon.
IT FAILED.
Now my phone is stuck in a weird looking boot up loop. After a few tries I was able to get into recovery
mode. TWRP started loading, froze and crashed! Even though I am a total noob at this, I still did not panic.
I'd restart my phone by removing the battery, going into recovery mode and then wildly press every button on my phone hoping to break the loop. It worked! I chose a different save and tried it all over again. FAIL.
ON the next I wiped every bit of old data off. Chose Factory restore crossed my fiingers....it work! My phone is fine now.
Thanks to that ordeal and this thread I think I know what I did wrong even though this never happened to me. before.
1) WIPE THE DATA
2)INSTALL A COMPATABLE KERNAL FIRST
V^^^^V
Vampyre111 said:
I certainly scared the carp outta me the other night. I'm using the Carbon ROM and while I do like it, I miss a couple of the S4s features. I picked what looked like a good modified stock ROM and proceeded to flash it.
I'm using Goo and TWRP for the job. I checked of all 3 boxes for clearing cache, davik and factory reset.
Then I chose the file and started it.
The first result, it acted like if was doing everything but nothing changed. Phone still worked fine.
On the next try, I waited for TWERP to start and I reselected the ROM I wanted and flashed it.
When it booted up, I was very happy to see the original screens come up. Then it stopped on the one with the Verizon check mark. The blue LED slowly pulsing and nothing else for about 30 min. I removed battery to try and start over. Same thing again.
Time to goto my backup and restore my phone back to Carbon.
IT FAILED.
Now my phone is stuck in a weird looking boot up loop. After a few tries I was able to get into recovery
mode. TWRP started loading, froze and crashed! Even though I am a total noob at this, I still did not panic.
I'd restart my phone by removing the battery, going into recovery mode and then wildly press every button on my phone hoping to break the loop. It worked! I chose a different save and tried it all over again. FAIL.
ON the next I wiped every bit of old data off. Chose Factory restore crossed my fiingers....it work! My phone is fine now.
Thanks to that ordeal and this thread I think I know what I did wrong even though this never happened to me. before.
1) WIPE THE DATA
2)INSTALL A COMPATABLE KERNAL FIRST
V^^^^V
Click to expand...
Click to collapse
I can not stress enough HOW IMPORTANT THE KERNEL IS!
Hmm so everyone is a now a Oriental Flash Master from the far East now huh?
What recovery is everyone using?
[updated: 07-12-2013]
Flashing Questions
So, if you just need to add something, like different Kernerl, do you have to wipe and start from scratch?
Should you.
If so, and you backup apps and data in Titanium, then what you do a full wipe, flash entire rom, and reinstall the apps and data associated therewith?
Last, I have asked this but cannot seem to get an answer.
Installed Hyperdrive 7 (also had 5.7 and 6). Rom is super smooth and fast, working like a charm. but I want Verizon Visual Voice Mail.
I tried to copy the apk file to the devices system/app directory but get permission denied message....tried to install, and get failed message....
xander45 said:
So, if you just need to add something, like different Kernerl, do you have to wipe and start from scratch?
Should you.
If so, and you backup apps and data in Titanium, then what you do a full wipe, flash entire rom, and reinstall the apps and data associated therewith?
Last, I have asked this but cannot seem to get an answer.
Installed Hyperdrive 7 (also had 5.7 and 6). Rom is super smooth and fast, working like a charm. but I want Verizon Visual Voice Mail.
I tried to copy the apk file to the devices system/app directory but get permission denied message....tried to install, and get failed message....
Click to expand...
Click to collapse
did you set the permissions for the app? That should work actually. Look at one of the apps in that directory, and set the permissions the same for the voice app. Reboot and see what happens.
Good luck.
May want to post this question also in my guide thread.
http://forum.xda-developers.com/showthread.php?t=2295557
Sorry if this is dumb, but how do I know what kernels for sure work with my device and how do I get them to my external sd card? I suppose the one that is currently on my device(how to get that to sd?), but what others?
Thanks.
Painterface said:
Sorry if this is dumb, but how do I know what kernels for sure work with my device and how do I get them to my external sd card? I suppose the one that is currently on my device(how to get that to sd?), but what others?
Thanks.
Click to expand...
Click to collapse
Please bring the question over to my thread up above. It shows also what kernels to use. We will help there.
Another noob question: so you still advise flashing a kernel even if the ROM creator says that the ROM comes with the appropriate kernel and that no extra flashing is required? I've got the Verizon Galaxy S4 variant and specifically am thinking of Dubbsy's Google Play Edition ROM.
Sent from my SCH-I545 using Tapatalk 2
theoneknownasbob said:
Another noob question: so you still advise flashing a kernel even if the ROM creator says that the ROM comes with the appropriate kernel and that no extra flashing is required? I've got the Verizon Galaxy S4 variant and specifically am thinking of Dubbsy's Google Play Edition ROM.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
You would flash the rom, and after, flash your verizon kernel, simple as that.