Can't get it to read. I read that the newest Olympus ROM coupled with the newest goodman kernel would work but it does nothing. The flash drive doesn't even light up. Tried a powered USB hub and it only lights for a second but the phone won't read it. Both the ROM and kernel list it as a feature and it does nothing. Also tried an ICS build with and without the goodman ROM and no success. Every USB host thread is dead just wondering if anyone had gotten it to work.
i use mine all the time
Awesome what ROM and kernel do you use? Is there anything special you had to do for it work or is it plug and play?
Related
I just bought a pre-rooted fascinate. The dude i bought it from said he had MIUI flashed on it, and I trusted the guy. The rom was a TSM Voodoo kernel based Rom. I was dumb and didn't read up on Voodoo and MTD. Since I know that MIUI and CM7 are very similar, I flashed CM7 on top of the rom running.
Everything runs fine, except USB DOES NOT WORK! I cant even enter download mode to use Odin. Is there a way to get this fixed?
Thanks in advance!
The Mtd based roms such as cm7 and miui actually use the nexus drivers of I am remembering right. If I were near my computer I would gram you a link to one of the threads
Sent from my cm7 SCH-I500 using Tapatalk
It is not the fact that the computer will not recognize the phone.
The phone itself does not recognize the fact that a usb is plugged in even with the usb debugging on it does not pop up with any usb commands on the phone. usb mass storage will not come up and because the phone will not recognize the usb i am not able to get the phone to access download mode.
couple simple things to try..
1) make sure your using a factory oem usb cable
2) clean the usb port with some contact cleaner(make sure phone is off and battery pulled)
if this does nothing than maybe the phone itself has a problem and will need to be repaired/or replaced.
I know you probably already tried this but, have you got the latest samsung drivers installed on your computer you are using. From what I have seen it it most likely doesn't use these drivers but, it is worth a shot I guess. Like the guy said before there might be something wrong with the USB port. Even when I have completely bricked my phone and it will do absolutely nothing, I am always able to get into download mode. That mode is like a pre-boot mode that doesn't use any drivers or files associated with any of the roms we flash on them (as far as I am aware of). May be the reason the guy sold it to you in the first place. He couldn't do anything with it.
hey guys
i recently got a USB otg cable for my S2(GT-I9100) and while this cable fine works with pen drives it doesn't work with any USB Keyboards or Mice that i plug into it. every time i do plug a keyboard or mouse, the phone completely freezes and i need to do a restart to get it running again
I tried applying the fix mentioned here (http://forum.xda-developers.com/showthread.php?t=1209567)
but still no good
any help will be appreciated
(PS: i am running siyah kernel 2.6.12 along with android 2.3.6)
Same here Bro
Heyho XDA,
sorry for pushing this old Thread,
but i have exactly the same Problem
Everytime i plug in a USB keyboard or a mice,
the Phone freezes instantly -.-
My Setup is:
CheckRom Revo v6
Siyah Kernel v2.6.13
Original Samsung OTG cable
Anyone else having this issue?
Or maybe a fix ?
Same problem
I've got the same problem. Pendrives, memorycardreader and systemcamera works great, but no mouse and keyboard.
Tested the same setup on my friends Galaxy Note and it worked out of the box. But not on my phone.
Download
USB Host Controller from the Play Store , see if that works.
scayre32 said:
USB Host Controller from the Play Store , see if that works.
Click to expand...
Click to collapse
It seems that USB Host and USB OTG are two different things. It has to be supported in the kernel. And I did root my phone and derooted by changing the kernel. I didn't save my original kernel so I had to download a new one. So maybe my kernel doesn't support OTG anymore.
I'm gonna look closer into this and report back it I'm getting it to work.
How do I get this to work? I made a thread which I can't find now. Downloaded kernel claiming to have it enabled and a Rom claiming the same (Titan 2.5). The rom alone does nothing so I flashed the kernel with similar results even after wiping cache and dalvik. It won't even power the USB device. I tried a powered usb hub and even that doesn't work. Are these claims fake and they expect no one to try it or does anyone have this working? If so what rom, kernel or process did you use?
I've read that it won't work on HW 002 phones - which is unfortunately what I have. So I haven't been able to get it to work either.
That said, Chad Goodman's early kernels didn't support mhl on 002 phones either. I updated to Anthrax kernel rev 13, and MHL was restored per a comment from Chad. You might try that kernel and see if it works for USB host. At this point, I'm not sure that the ROM I'm using even supports USB Host.
I recently flashed AOKP m7t0m 2013-06-30 and gmapps-jb-20130301 and everything is working fine with one exception - my USB OTG cable no longer seems to work.
I've tried using it with a flash drive, a keyboard, etc., and they all work with my older Android phone just as they previously did with my HTC one.
Is there any way to fix this? I would ask in the development thread but I need 10 posts to do so.
I have recently downloaded a program called Divemate USB which is supposed to allow me to sync data from my Suunto Cobra dive computer via the USB data cable with an OTG adapter. I have been unable to transfer data and the app says that no dive computer is connected. I contacted the developer who believes that the DNA may have certain USB devices may be limited by the stock Kernel. I am rooted and S-Off but I have never experimented with Kernel modifications. Does anyone know if any of the the DNA Kernels available here would solve my issue? The developer suggested that disabling the USB_OTG_WHITELIST may solve the problem but I do not know how to do that.
to access the otg feature plug in otg cable and your lil pc and reboot phone into recovery then go to advanced and select otg
now make sure your on the latest twrp or cwm recovery crpalmer kernel will do otg cables beastmode kernel will do otg cable
btw i dont know if otg will work in android i could be wrong and you can maybe try another app
also what rom are you on stock sense or what it has nothing to do with it but if your still stock kernel then try a custom kernel they all have otg support