Related
I've tried every possible combination ... literally tried everything and this quote from this thread http://forum.xda-developers.com/showthread.php?t=771247 just comfirmed it to me
METHOD 4: STUCK AT PHONE ! COMPUTER:
(and are not able to use vol+ vol- methods to access downloader/recovery)
CALL TMOBILE AND BEG FOR THEM TO REPLACE UR PHONE..
i cant believe its that easy to mess up your vibrant, my g1 never gave me a problem
did you try:
1. Phone starts OFF
2. Hold volume up + volume down buttons
3. Plug in USB cable
That is how I get into download mode. You don't ever hit the power button and you plug in the USB cable WHILE holding down the volume buttons.
El Cipitio said:
I've tried every possible combination ... literally tried everything and this quote from this thread http://forum.xda-developers.com/showthread.php?t=771247 just comfirmed it to me
METHOD 4: STUCK AT PHONE ! COMPUTER:
(and are not able to use vol+ vol- methods to access downloader/recovery)
CALL TMOBILE AND BEG FOR THEM TO REPLACE UR PHONE..
i cant believe its that easy to mess up your vibrant, my g1 never gave me a problem
Click to expand...
Click to collapse
El Cipitio!!!!!!!
[do you eat ashes?] j/k
anyway... I'm sure there's a fix.
I *think* there's a fix.
ndhr3d said:
did you try:
1. Phone starts OFF
2. Hold volume up + volume down buttons
3. Plug in USB cable
That is how I get into download mode. You don't ever hit the power button and you plug in the USB cable WHILE holding down the volume buttons.
Click to expand...
Click to collapse
This is the way, no power just volume up an volume down, or just volume down with the same method. Be sure you remove your sd and sim cards also.
Sent from my Vibrant running Bionix Final w/Jacs and Voodoo using XDA App
What has always worked for me is:
1. Power off the phone
2. Plug it in via USB
3. Wait for the green battery symbol to pop up
4. Hold vol. down and the power button until the Download screen pops up.
MrDragomir said:
What has always worked for me is:
1. Power off the phone
2. Plug it in via USB
3. Wait for the green battery symbol to pop up
4. Hold vol. down and the power button until the Download screen pops up.
Click to expand...
Click to collapse
I have a hardware locked phone and have been stuck at the phone to computer link screen (a rather nervous place to be, I might say). First you need to take the battery out (to turn the phone off). Then you plug in the USB with the battery out. Then you put the battery in. You need to get the battery charging indicator, and I can't remember if you need to unplug/replug USB for that or not. Then you hold down both volume buttons and the power button. The *second* time you see Vibrant (phone reboots twice) let go the power button. You should end up in download mode.
I have the same issue, and when i try to do this:
JJMT said:
I have a hardware locked phone and have been stuck at the phone to computer link screen (a rather nervous place to be, I might say). First you need to take the battery out (to turn the phone off). Then you plug in the USB with the battery out. Then you put the battery in. You need to get the battery charging indicator, and I can't remember if you need to unplug/replug USB for that or not. Then you hold down both volume buttons and the power button. The *second* time you see Vibrant (phone reboots twice) let go the power button. You should end up in download mode.
Click to expand...
Click to collapse
it resets back to the battery icon.
Basically, im in the exact same situation as El Cipitio. i tried EVERYTHING!!! no luck at all...
Can adb still see your phone? I'm guessing no, but if it can just use "adb reboot downlaod".
Then again.... you guys are aware that the "hardware locked" issue was fixed almost two months ago right? One of the members posted a thread with a zip and the JI6 update also fixed this. There fore if you didn't flash either you should call Tmo, but if you have, then you're just doing it wrong... GL either way.
ahbad said:
I have the same issue, and when i try to do this:
it resets back to the battery icon.
Basically, im in the exact same situation as El Cipitio. i tried EVERYTHING!!! no luck at all...
Click to expand...
Click to collapse
One other thing to try is to remove the sim and external sd card and try the instructions I posted again. Really, if you get the pc to phone connection icon, you can get it into download mode and use odin to flash.
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Might be a fix????
intruda119 said:
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Some one posted this in another thread. My brick got sent back before I could try this.
http://forum.xda-developers.com/showthread.php?p=8822843
This is how I got it to work....
1. Take out the battery
2. Plug the USB into the phone
3. Plug USB into the PC
4. Hold down the Volume up/down + Power button with one hand
5. Put the battery back in with the other hand
6. Wait for the phone2pc icon to flash 2 times and on the second time when the screen goes black release only the POWER BUTTON
7. When you see the digging Android you can let go of the Volume buttons
That is the only way I could get it to work
No, I can't get it into adb mode. The phone bootup screen comes (vibrant, the pink tmobile thing, then galaxy s), but then it goes black. The computer doesn't find anything during this time.
I don't really have time to do the soldering, so i'll try calling samsung. Problem is i live in toronto and bought this thing for cash, so i have no clue what to tell samsung lol. If that doesnt work, i guess soldering it is...
Try this:
unplug, remove battery, remove sim/sd cards
hold down volume control buttons
plug into wall adapter (usb charger - not to computer but to outlet)
pop battery in
Took me a couple tries, but I got my Vibrant into dl mode from nothing but a black screen (I could not register charging, or "phone ! pc" error)
intruda119 said:
Dont waste your time fellas with trying to get,into recovery/download mode. If its anything like my hardware locked vibrant there isn't a key combo that will work. Probably thinking that your doing something wrong,YOUR NOT.
Im using my vibrant on att so I didn't consider calling tmobile. I actually called samsung, and after 5min on the phone they agreed to repair/replace for free. They recieved my phone on saturday amd I got it back that following thursday.
Save yourself a headache and sending
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I'm am referencing more to the fact that these phones are not "hardware" locked. Hardware would refer to the volume & power keys not working... When your phone is on they work right?
Like stated before, IF, your phone is "hardware locked" look to either use the script or flash JI6. This way you re-gain functionality of the recovery & dl mode before flashing anything!
Ditto.. i got mine back after flashing without removing the lag fix.. never again... i will wait for froyo.. if that ever happens...
May I ask what bricked you?
nomadrider123 said:
Some one posted this in another thread. My brick got sent back before I could try this.
http://forum.xda-developers.com/showthread.php?p=8822843
Click to expand...
Click to collapse
The brick, in atleast my case, was from untimely removal of the phone from USB during Download mode of flashing stock kernal via Odin. This method described in the link above worked for me in getting the phone to boot into download mode without the use of the hardware keys (aka hardware locked phones). I also contacted Samsung directly through their Galaxy tech line, and they said I could send it in for free with their shipping label and if they couldn't flash back I could get a replacement, but there was a about a 2 week window I would be looking at without a phone, so I tried the homemade download-boot circuit and it worked perfectly.
THIS IS YOUR FIX!!!
I just did this the other day. If you are still stuck with the phone/!/computer screen do the following:
1.Hold the volume up/down + power button simultaneously
2.The screen will go black / reappear/ then go black again...when this happens, release the power button and continue holding the volume up/down button
3.Welcome back to download mode!
Please Mods, please lock this thread
Please stop waisting everyones time with stupid instructions.
When a phone is "hardware locked" (that is, bad flash/missing the sbin file.....)
YOU CANNOT GET INTO DOWNLOAD MODE OR RECOVERY WITH ANY KEY COMBINATION.
Stop waisting your time trying anything cause its not going to work. And thats a Fact.
Final fix and summary to this thread,
Either call T-mobile or Samsung.
Finish.
hi
i was flashing my device with odin and the PC restarted by it self during the flash process now my mobile is not powering and nothing happen when i press the power buttn i removed the battery and put it again and still nothing
can u plz help
i feel like i lost my phone
get a jig, look it up on ebay, it may help or may not.... it seems like you may have bricked your phone....
does the phone still somehow show up as connected to the pc or not?
no its not
Can you go into download mode?
no i cant
nothing happen when i press power
like its dead
steve699 said:
no i cant
nothing happen when i press power
like its dead
Click to expand...
Click to collapse
not anything when you hold power, home and Volup either?
Sent from my GT-I9100 using XDA Premium App
Novek said:
not anything when you hold power, home and Volup either?
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Yes, home + volume down + power, afterwards and all together.
Adrian
Comp~ZxSpectrum
Kernel~Ninphetamine 2.0.2
PDA~Lite'nin 4.2
CSC~KG3
UK GPS~system/etc/gps.conf~NTP_SERVER=uk.pool.ntp.org
Browser~Xscope
Call Recorder~Tot Recall
Mods~setCPU +Nitrality
Its dead....I can guarantee you a jig will not work so dont waste your time....thats a hard brick, and if you cant even get it to turn on, its game over
Im sorry for your loss I really am, if their was a smilee shedding a tear I would put it
If your computer REALLY just restarted by itself, it is not your fault, sometimes odin can hang up and crash (not responding) and kill your phone too.
Moment of silence for her (bows head down)
but seriously, I hope you have insurance. If you have insurance, everything will be ok
Just say it started getting hot, you went to bed, woke up the next morning, and it would not turn on.
Or warranty repair might do it.
I bricked my old HTC Hero when I made a mistake flashing the radio and I returned it to store and had it back repaired 2 weeks later . The repair report blames the mainboard and replaced it all free.
So good luck, and I know exactly how you feel
Hi,
I'm going to keep it as short as I can, just bought a vibrant and rooted in a nice way, then I tried to use odin to update from 2.1 to 2.2, it did it but then the screen goes black and it doesn't shows anything and when i say anything I really mean it, no battery when I plug it, and no brick message. Then I discovered that I used the wrong image to try and update it the one for the i9000
note:
i tried to put it on download mode, but as i said before it doesn't do anything is literally dead it, i think I'm going out of options i got no idea what to do anymore, PLZ SOMEONE GIVE ME SOME HOPE!!!
Two options
1) Go to radio shack, spend a few bucks and build a custom USB jig that will get you into download mode. The thread is here somewhere in the forums, search for it.
2) http://forum.xda-developers.com/showthread.php?t=1277056
UnBrickable Mod is awesome! It's easier to upload download mode with a click then to hold buttons.
SamsungVibrant said:
Two options
1) Go to radio shack, spend a few bucks and build a custom USB jig that will get you into download mode. The thread is here somewhere in the forums, search for it.
2) http://forum.xda-developers.com/showthread.php?t=1277056
Click to expand...
Click to collapse
I did one myself, and tested on a friend captivate, but my vibrant still the same NOTHING!, i mean wtf! the only thing it could have is a software/firmware problem but it seems he completely died on me!! :/
I had a bad cable once and had a odin flash go wrong..
Started out with download mode, but with no luck connecting to pc via 2 diff computers (not realizing it was the cable at the time) I kept messing around with it, sometimes connecting, then Odin screwing up again and eventually got to your point...nothing whatsoever, DEAD
After a while...called TMO and ordered a replacement...but didn't give up, I kept on with cable to phone, then pc...vice versa...battery in/out..and eventually out of nowhere it came back on..no idea how..one thing I do remember is reading to use vol up+down, but for me there was some weird combo where I think i started with up+down, then let go of up(kept holding down, or just used vol down)..can't quite remember...but don't give up..again mine was dead dead dead...somehow she came back...keep trying different things no JIG...
EDIT: Take your micro sd out of the phone and sim card too...that much i do remember...
accordex said:
I had a bad cable once and had a odin flash go wrong..
Started out with download mode, but with no luck connecting to pc via 2 diff computers (not realizing it was the cable at the time) I kept messing around with it, sometimes connecting, then Odin screwing up again and eventually got to your point...nothing whatsoever, DEAD
After a while...called TMO and ordered a replacement...but didn't give up, I kept on with cable to phone, then pc...vice versa...battery in/out..and eventually out of nowhere it came back on..no idea how..one thing I do remember is reading to use vol up+down, but for me there was some weird combo where I think i started with up+down, then let go of up(kept holding down, or just used vol down)..can't quite remember...but don't give up..again mine was dead dead dead...somehow she came back...keep trying different things no JIG...
EDIT: Take your micro sd out of the phone and sim card too...that much i do remember...
Click to expand...
Click to collapse
thx for the ray of hope pal but I think i'll just sell ir or something anyway doesn't hurt to keep trying until it happens, i have seen mostly 2 kind of options on internet the buttons combo and the jig tried them both nothing seems to work, I just think i have no luck, i bought the cell and 48h later it was already dead.....anyways thx to the people who bothered to answer me
Options:
1.you can call TMO for replacement.
2. Let the technician open it maybe there's something wrong wid d digitizer
3.Have you heard about the JTAG? It can resurrect your phone!
Djhemz07 said:
Options:
1.you can call TMO for replacement.
2. Let the technician open it maybe there's something wrong wid d digitizer
3.Have you heard about the JTAG? It can resurrect your phone!
Click to expand...
Click to collapse
UnBrickable mod is way better than JTAG. You should check it out. JTAG works once. UnBrickable mod allows software based recovery always and works on a dead brick with no special tools once its applied.
There two videos on the portal now which mention it. I'd like to think people are using it.. after all, this mod doesn't just happen. It takes someone to put in the work to research it... ahem...
option 1
--------
1. remove the sim-card and the memory card
2. remove the battery
3. connect the USB cable to the computer and to the cellphone (still no battery).
4. press on both volume buttons (volume up+volume down)
5.while you press on the buttons enter the battery into the cellphone.
option 2
--------
1. connect the USB cable to the computer and to the cellphone
2. press on both volume buttons (volume up+volume down)
3. press and hold the power button
4. the screen will dim - keep pressing on the buttons (3 of them)
5. the screen will show up the cellphone-computer picture - keep pressing...
6. the screen will dimm again - keep pressing
7. the screen will show up with the vibrant logo
8. leave the buttons - now the cellphone should enter to download mode
AdamOutler said:
UnBrickable mod is way better than JTAG. You should check it out. JTAG works once. UnBrickable mod allows software based recovery always and works on a dead brick with no special tools once its applied.
There two videos on the portal now which mention it. I'd like to think people are using it.. after all, this mod doesn't just happen. It takes someone to put in the work to research it... ahem...
Click to expand...
Click to collapse
sounds interesting i'll try those method anyone mind sending me the links?? btw how am i supposed to connect my phone onto the PC if it doesn't start which means it doesn't get recognized???? and a friend told me that i ****ed the Boot load does it fix that too??
vicmelgen said:
sounds interesting i'll try those method anyone mind sending me the links?? btw how am i supposed to connect my phone onto the PC if it doesn't start which means it doesn't get recognized????
Click to expand...
Click to collapse
Just connect it to the pc even if it doesn't recognized
Sent from my GT-I9000 using XDA App
did you try this?
battery out...
battery in--> hold only vol UP and power? for a few seconds
My SII just died over the weekend. I was installing the latest JB AOKP and it was rebooting or freezing up randomly when it eventually just decided to not come back up.
I have tried several of the suggestions to try to at least get it into download mode but nothing happens. I have plugged it in and it warms up, seeming to be charging, but the computer does not see it.
I am debating trying this:
http://forum.xda-developers.com/showthread.php?p=8822843
Any other suggestions?
Thanks.
You tried taking battery out plugging into the computer then trying download mode? Also tried jig?
Sent from my SGH-I777
122ninjas said:
You tried taking battery out plugging into the computer then trying download mode? Also tried jig?
Sent from my SGH-I777
Click to expand...
Click to collapse
Tried the first one, but not the jig, don't have one. Was hoping some other method would work without buying the jig.
Thanks.
pgonza02 said:
Tried the first one, but not the jig, don't have one. Was hoping some other method would work without buying the jig.
Thanks.
Click to expand...
Click to collapse
Its like 2$
Sent from my SGH-I777
122ninjas said:
Its like 2$
Sent from my SGH-I777
Click to expand...
Click to collapse
Dumb question, are they generic or phone specific?
Do you have a link to one?
Thanks.
pgonza02 said:
Dumb question, are they generic or phone specific?
Do you have a link to one?
Thanks.
Click to expand...
Click to collapse
I have never needed to use one but when I saw your post I searched Amazon for "USB jig" it looks like some are phone specific some don't work at all some have bad reviews etc. of course if you get this one " [Aftermarket Product] Black Download Mode Unbrick Fix Micro USB JIG For Samsung GT-i9100 Galaxy S II Omnia 7 Epic Fascinate T959 Vibrant Replace Replacement by BestMatch" with free shipping on orders over $25.00 it's $4.99 and it don't work it is Fulfilled by Amazon so no problem getting a refund.. Some reviews say it works on the i777 I can't confirm this...... Just be careful of fake reviews from dummy accts. Here is the link..... GL I know you can get them on ebay as well
http://www.amazon.com/s/ref=nb_sb_s...field-keywords=usb+jig&sprefix=usb+ji,aps,608
snipe2nite said:
I have never needed to use one but when I saw your post I searched Amazon for "USB jig" it looks like some are phone specific some don't work at all some have bad reviews etc. of course if you get this one " [Aftermarket Product] Black Download Mode Unbrick Fix Micro USB JIG For Samsung GT-i9100 Galaxy S II Omnia 7 Epic Fascinate T959 Vibrant Replace Replacement by BestMatch" with free shipping on orders over $25.00 it's $4.99 and it don't work it is Fulfilled by Amazon so no problem getting a refund.. Some reviews say it works on the i777 I can't confirm this...... Just be careful of fake reviews from dummy accts. Here is the link..... GL I know you can get them on ebay as well
http://www.amazon.com/s/ref=nb_sb_s...field-keywords=usb+jig&sprefix=usb+ji,aps,608
Click to expand...
Click to collapse
Ordering this one, says compatible with the i777:
http://www.ebay.com/itm/Micro-USB-J...1837135521317378180&pid=100011&prg=1005&rk=5&
Will let you know how it works once I get it.
Thanks.
Got the jog, tried it out, no luck.
This seems like a bad one.
pgonza02 said:
Got the jog, tried it out, no luck.
This seems like a bad one.
Click to expand...
Click to collapse
It might be the phone is fully bricked and no jig is going to put it into DownLoad mode... If the battery is not charged I don't know if it will go into DL mode with the jig.... I do know you can pull the battery out have your USB cable plugged into your comp and on the phone hold vol+ vol- and then plug the cable into the phone to get into DL mode.... Your next step will be a JTAG via MobileTechVideos.com <~~~~ This dude is a BadAss confirmed..... GL
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t/ Link to the i777 page
http://www.youtube.com/watch?v=zN7le4GmxZs JTAG video in action on the i9100 via MobileTechVideos YouTube channel
pgonza02 said:
My SII just died over the weekend. I was installing the latest JB AOKP and it was rebooting or freezing up randomly when it eventually just decided to not come back up.
I have tried several of the suggestions to try to at least get it into download mode but nothing happens. I have plugged it in and it warms up, seeming to be charging, but the computer does not see it.
I am debating trying this:
http://forum.xda-developers.com/showthread.php?p=8822843
Any other suggestions?
Thanks.
Click to expand...
Click to collapse
While plugged in, if it heats up closer to the camera than the battery portion of the phone, it's possibly a hard brick.
What I tried from Samsung and ATT tech support before I sent it in for warranty repair:
1. Hold power button down for over 30 s to see if it reboots, or
2. Hold power button + vol up + vol down for 30 s till it reboots, or
3. Hold power button + vol down for 30 s till it reboots, or
4. Remove the battery for 2 min, hold down power button + vol up + vol down buttons, and then put in the battery, or
5. Remove the battery for 2 min, and try step 2, or
6. Remove the battery and try step 2.
Good luck :good:
PS: No questions were asked about rooting/flashing ROMs to me from Samsung before they repaired my phone in warranty. YMMV.
Recommended jig on XDA: http://m.dealextreme.com/p/unbrick-download-301k-usb-mode-jig-for-samsung-t959-i9000-i897-m110s-i8700-i9100-93514
VerticalCobra said:
While plugged in, if it heats up closer to the camera than the battery portion of the phone, it's possibly a hard brick.
What I tried from Samsung and ATT tech support before I sent it in for warranty repair:
1. Hold power button down for over 30 s to see if it reboots, or
2. Hold power button + vol up + vol down for 30 s till it reboots, or
3. Hold power button + vol down for 30 s till it reboots, or
4. Remove the battery for 2 min, hold down power button + vol up + vol down buttons, and then put in the battery, or
5. Remove the battery for 2 min, and try step 2, or
6. Remove the battery and try step 2.
Click to expand...
Click to collapse
What is the point of doing this? what would it prove?
1. normal procedure for a BSOD reboot. phone stuck on black screen while on.
2. if off and doing that, will bring recovery mode.
3. nothing
4. minus the power button it should bring you to download mode.
5.pointless
6. pointless.
At&t tech support are retards. They have a list of stuff to do that most of the time does absolutely nothing. Like if your USB port is toast they might have you do a factory reset, which will not do a damn thing.
MotoMudder77 said:
What is the point of doing this? what would it prove?
1. normal procedure for a BSOD reboot. phone stuck on black screen while on.
2. if off and doing that, will bring recovery mode.
3. nothing
4. minus the power button it should bring you to download mode.
5.pointless
6. pointless.
At&t tech support are retards. They have a list of stuff to do that most of the time does absolutely nothing. Like if your USB port is toast they might have you do a factory reset, which will not do a damn thing.
Click to expand...
Click to collapse
Well, trying to get OP into download/recovery mode was the point of this thread...
To many techie users at XDA, techs may appear retarded. However, techs have to assume the users who call in don't know much about their phones...hence their boilerplate suggestions.
VerticalCobra said:
While plugged in, if it heats up closer to the camera than the battery portion of the phone, it's possibly a hard brick.
What I tried from Samsung and ATT tech support before I sent it in for warranty repair:
1. Hold power button down for over 30 s to see if it reboots, or
2. Hold power button + vol up + vol down for 30 s till it reboots, or
3. Hold power button + vol down for 30 s till it reboots, or
4. Remove the battery for 2 min, hold down power button + vol up + vol down buttons, and then put in the battery, or
5. Remove the battery for 2 min, and try step 2, or
6. Remove the battery and try step 2.
Good luck :good:
PS: No questions were asked about rooting/flashing ROMs to me from Samsung before they repaired my phone in warranty. YMMV.
Recommended jig on XDA: http://m.dealextreme.com/p/unbrick-download-301k-usb-mode-jig-for-samsung-t959-i9000-i897-m110s-i8700-i9100-93514
Click to expand...
Click to collapse
Thanks, tried all of the methods. No luck.
MotoMudder77 said:
What is the point of doing this? what would it prove?
1. normal procedure for a BSOD reboot. phone stuck on black screen while on.
2. if off and doing that, will bring recovery mode.
3. nothing
4. minus the power button it should bring you to download mode.
5.pointless
6. pointless.
At&t tech support are retards. They have a list of stuff to do that most of the time does absolutely nothing. Like if your USB port is toast they might have you do a factory reset, which will not do a damn thing.
Click to expand...
Click to collapse
The point is that the phone is NOT powering on so the suggestions are to try and get it to turn on and go into download mode at best, at worst get it to turn on and go into ADB. I know the difference between a black screen with phone on on (ADB will work in that case, PC will recognize the device connected) and the phone completely dead.
snipe2nite said:
It might be the phone is fully bricked and no jig is going to put it into DownLoad mode... If the battery is not charged I don't know if it will go into DL mode with the jig.... I do know you can pull the battery out have your USB cable plugged into your comp and on the phone hold vol+ vol- and then plug the cable into the phone to get into DL mode.... Your next step will be a JTAG via MobileTechVideos.com <~~~~ This dude is a BadAss confirmed..... GL
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t/ Link to the i777 page
http://www.youtube.com/watch?v=zN7le4GmxZs JTAG video in action on the i9100 via MobileTechVideos YouTube channel
Click to expand...
Click to collapse
Looks like JTAG service for me.
Nothing else is working.
Thanks for the link and the help.
Just got the phone back from the JTAG service, same behavior.
Contacting them to see if I'm doing something wrong.
Will keep you posted.
Thanks.
pgonza02 said:
Just got the phone back from the JTAG service, same behavior.
Contacting them to see if I'm doing something wrong.
Will keep you posted.
Thanks.
Click to expand...
Click to collapse
Hi, any update on this? I am having the same issue, phone wont go to download mode at all, tried USB jig as well.
Is it worth going to JTAG service, if they dont bring the phone into download mode, do they refund the money?
resolution
My phone is in the same state. Was there ever a resolution to this post?
srter said:
My phone is in the same state. Was there ever a resolution to this post?
Click to expand...
Click to collapse
Jtag
Sent from my GS4 running CM11 Kandy Kane
and nalsaffs
I have the same problem start out as soft brick went into hard brick over night. Looks like my last hope is JTAG, but if he still couldn't get it to work I don't want to waste my money on it.
I'm not tech saavy - I'll try to remember what all I did as best I can.
I rooted my s3 a few months ago based on some detailed instructions found online - no issues. The method used involved clockwork mod or some such.
Fastforward to today - I was following these
http://www.androidpolice.com/2010/0...d-phone-with-rom-manager-full-backup-restore/
instructions to attempt to install liquidsmooth (http://forum.xda-developers.com/showthread.php?t=2108013) rom. Prior to doing anything, I had backed up everything on titanium backup and using the back up in rom manager. In step 3.1, "flash a recovery image," I didn't think I needed to do this, as I thought it was a part of rom manager.
At any rate, I proceeded onward, and after the phone finished making a back up, immediately after it started to install the new rom, the screen went black (I assume the phone turned off).
I'm currently unable to get it to turn on at all, taking the battery out didn't do anything, and when I plug it into the comp via USB, it doesn't seem to recognize the device.
So I'm quite sure I'm bricked.... But if anyone could provide any advice (or confirm I'm bricked), I'd very much appreciate it. I'm a broke med student on loans, and a new phone is going to hurt the bank account a lot
Thank you in advance
P.S. It's 3:40 am here now.. I need to get to sleep, but I'll check on the thread first thing tomorrow
Sorry to say...
I am sorry to say but if your phone does not turn on at all or does not get in to recovery , It is hard bricked and there is nothing you can do about it.. try getting into download mode. If you can then something can be done. if not then......
To get into download mode simultaneously press the volume down key , home key and power button. Tell me if the download mode screen comes..
When the phone is plugged into the computer via USB and I hold the power button (or any other reset combo of buttons), the computer makes the sound like it realizes I detached the device, but then it makes a triple short 'bum bum bum' when the power comes back on (all of this with no apparent changes from the phone)
If it's helpful, a friend realized I downloaded an international ROM on an ATT phone
njbartel said:
When the phone is plugged into the computer via USB and I hold the power button (or any other reset combo of buttons), the computer makes the sound like it realizes I detached the device, but then it makes a triple short 'bum bum bum' when the power comes back on (all of this with no apparent changes from the phone)
If it's helpful, a friend realized I downloaded an international ROM on an ATT phone
Click to expand...
Click to collapse
the "bum bum bum" noise is the usb device malfunction error so chances are is that its definately hard bricked. there not really anything else you can do at this point.
Sent from my U8160 using xda premium
Sending it in for JTAG. Thank you all for the help
njbartel said:
When the phone is plugged into the computer via USB and I hold the power button (or any other reset combo of buttons), the computer makes the sound like it realizes I detached the device, but then it makes a triple short 'bum bum bum' when the power comes back on (all of this with no apparent changes from the phone)
If it's helpful, a friend realized I downloaded an international ROM on an ATT phone
Click to expand...
Click to collapse
I think its hard bricked .... Just to make sure without plugging the usb , try to get into download mode... (simultaneously press the volume down key , home key and power button) if you can then your fone can be saved otherwise... try it and inform us if your phone got into download mode or not..
njbartel said:
Sending it in for JTAG. Thank you all for the help
Click to expand...
Click to collapse
Try get into download mode before you send it off. Hold volume down +power + home button. Do it without a USB cable inserted.
Sent from my GT-I9000 using xda premium
Thank you both for the replies, my apologies for just noticing them and responding. My phone was definitely hard bricked (no combination of button pushing with or without the USB in would get the screen to change off black).
I sent the phone here
(I tried to do a URL, but my post count prohibits it. If you google search "brickedmyphone", it's the 1st hit)
for JTAG, and I feel the need to give the guy running it a plug. Very prompt replies prior to placing the order, and updates given throughout. The same day he received the phone, it was fixed and mailed back out. Total turnaround time, including shipping, was 5 days (received it today, phone was packaged securely and in perfect /working/ condition). Just need to reactivate the sim tomorrow (activated an old iphone with another sim on my number).
Thank you all again for the help!