Related
Neok UltimateS Kernel v3.9Ti
2.6.38.8, 128-1190, CFS, NOOP/CFQ/BFQv2/SIO/VR, SWAP, SLAB, HAVS, AXI, HW3D kernel included (base on Tiamat 4.0.6)
my Kernel changeset (compare Tiamat4.0.6)
- Amazing Smooth working
- Add SIO IO Scheduler
- Add VR IO Scheduler
- Change kernel optimization flags
- Compiled by 2011.10 Linaro GCC4.5.4 with -O2 and other optimization flags
- CFS Tweak (SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 0))
- Applied Preempt TinyRCU & RCU Booster
- Applied RCU Optimization
- Applied RCU FAST NO HZ
- Added InteractiveX cpu governor
- Default IO Scheduler set to noop
- Config.hz 500HZ
- Improve battery efficiency
- Improve battery AVS Code (source by Intersect-Raven)
- support call record (source by cm7)
- WIFI Driver change to pershoot's kernel driver
(no problem at wifi channel 13)
- Support Voltage Control (VDD Control - /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs)
- Ondemand tweak
- Support AXI,HW3D
- CPU Clock control 128-1190 (not recomanded 128Mhz at AXI Kernel)
- Improve SDHC card stability
- Ultra save battery
mesured Current-widget - minimum 2mA at sleep
3.2r1 -> 3.3 changeset
- change smartass codes and tweak
3.3 -> 3.7 changeset
- change AVS, Cpufreq Driver
- Excluded Smartass governor
- add SmartassV2 CPU Governor
- add Lagfree CPU Governor
- add Lazy CPU Governor
- VFP Compile flag change
- module tun.ko, cifs.ko
- change WIFI Driver by pershoot
3.7 -> 3.9 changeset
- High frequency cpu clock AVS Votage change for improve stability
- amplification sound
- Compiled by Linaro GCC 4.5.4 (2011.08)
- fuse module
- Other module settings changed
KERNEL works on Cyanogenmod, MIUI, Oxygen(higher version) Rom
Strongly recomand "Ondemand" governor
it's smoothest
experience "Extreme Smooth"
Better than iphone4 or GalaxyS2
Next Kernel will be change to base on CM7 Stock kernel
Happy new year!!!!!
Thanks to Cayniarb, Cyanogenmod team, intersectRaven, ch33kybutt, pershoot
Wipe dalvik-cache after update
KGPNeok Nexroid UltimateS v3.3 Kernel source (for developer only)
http://www.multiupload.com/3HIM8VGVMD
Dude, you know how to catch us
Testing it now...
Sent from my Nexus One using Tapatalk
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
what governor works best?
Markdental said:
what governor works best?
Click to expand...
Click to collapse
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
How install it? Should i put the zip on the SD card and install it in the bootloader?
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
ebautista said:
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
Click to expand...
Click to collapse
thanks
Markdental said:
what governor works best?
Click to expand...
Click to collapse
i strongly recommand ondemand
bunnahabhain said:
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
Click to expand...
Click to collapse
smartass is bad working on my kernel
strongly recommand ondemand
giganielsie said:
How install it? Should i put the zip on the SD card and install it in the bootloader?
Click to expand...
Click to collapse
update on recovery mode
cpm said:
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
i tried to add smartassv2 but it has some problem
sorry
texasice said:
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
Click to expand...
Click to collapse
that's very interesting
if you provide kernel source,
i'm try to build kernel
revthanki said:
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Click to expand...
Click to collapse
alisabki said:
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
Click to expand...
Click to collapse
it's little change
added Improve SDHC card stability on r1 version
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
kgp700 said:
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
Click to expand...
Click to collapse
need to wipe dalvik cache too right?
alisabki said:
need to wipe dalvik cache too right?
Click to expand...
Click to collapse
recommand that
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
pongalong said:
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
Click to expand...
Click to collapse
yes, this kernel working on oxygen1mod
but old version is not working
working on OxygeN1mod-2011.11.26 version or higher version
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
DaxElectro said:
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
thanks!!
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
aujbman said:
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
Click to expand...
Click to collapse
4 hours with lastest kernel (r2) and Wifi ON. No problems at all.
My SGA is on GB 2.3.6 (Russian ROM) and I have installed No-Frills CPU, but I am not able to use it to full potential. The Developer says I need some custom Kernels for this.
Which Kernels are these? Is it ok to use diff kernels?
what do u mean by "full potential"?
afaik for changing cpu scaling freq, cpu governor or changing disk io scheduler, u can do it even on stock kernel. maybe the selection is a little bit less, but it'll definitely works.
i dont know if cpufrills can also change cpu voltage, even so we dont have any kernel that support cpu voltage changing yet.
You might have seen No-Frills cpu, but few users are getting more governors than me using some diff kernel.
anyways, I want some other way, so that my cpu cuts down frequency really down when phone is locked, and jump up accoring to requirement. (Just like Cool'n quiet in AMD)
then u might wanna install cfroot kernel. it contain smartassv2 and interactiveX that do have automatic cpu down scaling when screen off.
but u can also set up profile to do it manually on other governors using setcpu.
What about the kernel by squadzone supposedly optimised for gingercruzt but it works for cm7 and has 6 IO schedulers, but cf-root is best for stock
Sent from my GT-S5830 using xda premium
My phone is already rooted and got busybox. So if I use cfroot, what would the affect on previous root and busybox? How do I backup current kernel if I need to go back.
animal_he said:
My phone is already rooted and got busybox. So if I use cfroot, what would the affect on previous root and busybox? How do I backup current kernel if I need to go back.
Click to expand...
Click to collapse
no, it wont affect root as it also give root.
and just use clockworkmod recovery to create backup of ur whole rom. and if u just wanna restore kernel use the advance restore to restore just the kernel itself
an0nym0us_ said:
then u might wanna install cfroot kernel. it contain smartassv2 and interactiveX that do have automatic cpu down scaling when screen off.
but u can also set up profile to do it manually on other governors using setcpu.
Click to expand...
Click to collapse
Hey, I'm using ICS Final and I only have the InteractiveX and normal Interactive options but not the smartassV2. Where can I get it? I'm using the Smartass governor out of all of them. What is the difference between the two? (V1 & V2)
Thanx a lot for all the info mate. Can u just help me find one appropriate for my phone?
Version 2.3.6
Build number .XXKPP
SuperAce609 said:
Hey, I'm using ICS Final and I only have the InteractiveX and normal Interactive options but not the smartassV2. Where can I get it? I'm using the Smartass governor out of all of them. What is the difference between the two? (V1 & V2)
Click to expand...
Click to collapse
Install zImage-Mod v1.0 (you can find it in the Development Section).
Hi guys....i'm an experienced developer who ported CM9 on lg P500......today i have a Galaxy SIII Mini and i want to start to develop for this device. Meanwhile i'm helping oliver for cm10, i want to develop a custom kernel. The objective is to have good battery life and great perfomances.
Changelog for v2:
MultiCore Sched Support
JRCU (an RCU optimized for multicore devices)
Optimized Arm RWSem Algorithm
Autogroup Sched
LowmemoryKiller updated to latest version and enabled an option that calculates automatically oom values
Added some Mali patches (thanks to cocafe)
SLQB memory allocator
Row I/O Scheduler default
JIT compiler for net packages
CleanCache
A lots of new Governors
A lots of patches that you can find here: https://github.com/lupohirp/GoldenKernel/commits/master
BUG!!!!! : Reboot option doesn't work. Must fix this in samsung drivers!
Here's changelog for v1:
Kernel compiled with linaro gcc 4.7.3
Added hotplug and pegasusq governor
Cpu unaligned specified path
Dynamic fsync control
Here's the download link(V2):https://hotfile.com/dl/202694028/d947bb6/goldenkernelv2.zip.html
Kernel Sources Here: https://github.com/lupohirp/GoldenKernel
Change Governor with setcpu or nofrills. I reccomend to use OnDemandQ governor for this reason: OnDemandQ disable the second core when is not needed and reactivate it when cpu load is heavy. the result is a great perfomance with a a really good battery drain
For install this FLASH WITH RECOVERY!!!
lupohirp said:
Hi guys....i'm an experienced developer who ported CM9 on lg P500......today i have a Galaxy SIII Mini and i want to start to develop for this device. Meanwhile i'm helping oliver for cm10, i want to develop a custom kernel. The objective is to have good battery life and great perfomances.
Here's changelog for v1
Kernel compiled with linaro gcc 4.7.3
Added hotplug and pegasusq governor
Cpu unaligned specified path
Dynamic fsync control
Here's the download link:https://hotfile.com/dl/196945944/e6599fb/GoldenKernelv1.zip.html
Change Governor with setcpu or nofrills. I reccomend to use hotplug governor for this reason: hotplug disable the second core when is not needed and reactivate it when cpu load is heavy. the result is a great perfomance with a a really good battery drain
For install this FLASH WITH RECOVERY!!!
Click to expand...
Click to collapse
Have you compiled it using goldennfc_config?
lupohirp said:
Hi guys....i'm an experienced developer who ported CM9 on lg P500......today i have a Galaxy SIII Mini and i want to start to develop for this device. Meanwhile i'm helping oliver for cm10, i want to develop a custom kernel. The objective is to have good battery life and great perfomances.
Here's changelog for v1
Kernel compiled with linaro gcc 4.7.3
Added hotplug and pegasusq governor
Cpu unaligned specified path
Dynamic fsync control
Here's the download link:https://hotfile.com/dl/196945944/e6599fb/GoldenKernelv1.zip.html
Change Governor with setcpu or nofrills. I reccomend to use hotplug governor for this reason: hotplug disable the second core when is not needed and reactivate it when cpu load is heavy. the result is a great perfomance with a a really good battery drain
For install this FLASH WITH RECOVERY!!!
Click to expand...
Click to collapse
thx a lot for your work, have installed, there is one problem i can see at once, i can not set cpu freq above 800, when you set to 1000 it´s changes to 800
Edit: forget about 800, i did not understood power saving mode , but governor choice does not persist reboot
Installed and setCPU governor to hotplug and I will see how it goes.
Is it possible to have also stock CWR kernel , just in case...?
Re: [Kernel]GoldenKernel[v1]
There's dariolob 's CWM stock kernel here for I8190 only here: http://forum.xda-developers.com/attachment.php?attachmentid=1763968&d=1361921910
Sent from my GT-I8190 using xda premium
Thanks alot! Testing it now
btw..update says flashing BLN kernel. Maybe you wanna change that.
---------- Post added at 02:20 PM ---------- Previous post was at 02:16 PM ----------
funiewski said:
thx a lot for your work, have installed, there is one problem i can see at once, i can not set cpu freq above 800, when you set to 1000 it´s changes to 800
Click to expand...
Click to collapse
Make sure you don't have cpu power saving mode on in powersaving settings. Otherwise you'll get max 800.
gonna try now
core7x said:
gonna try now
Click to expand...
Click to collapse
If your signature is correct you have the -N version S3 mini would you try to switch NFC on after flashing the kernel? if it works it means he used the right configuration file when compiling and the kernel is universal for all the I8190 variants Thank you very much!
tys0n said:
Thanks alot! Testing it now
btw..update says flashing BLN kernel. Maybe you wanna change that.
oooppps i have used BLN ramdisk for base
---------- Post added at 02:20 PM ---------- Previous post was at 02:16 PM ----------
Make sure you don't have cpu power saving mode on in powersaving settings. Otherwise you'll get max 800.
Click to expand...
Click to collapse
dariolob said:
If your signature is correct you have the -N version S3 mini would you try to switch NFC on after flashing the kernel? if it works it means he used the right configuration file when compiling and the kernel is universal for all the I8190 variants Thank you very much!
Click to expand...
Click to collapse
no it is only for model without nfc. But i can do a NFC version for those that have this model
lupohirp said:
no it is only for model without nfc. But i can do a NFC version for those that have this model
Click to expand...
Click to collapse
Thank you very much it would be awesome :victory: You just have to compile using goldennfc_config and the kernel will be suitable for both versions
Re: [Kernel]GoldenKernel[v1]
Whoa seemed ok until I turned off power saving then I started getting some serious battery drain..
Sent from the dark side on my GT-I8190
Re: [Kernel]GoldenKernel[v1]
Seems to of gone back to normal after a charge.. I don't know what caused the drain, the phone was sleeping
Sent from the dark side on my GT-I8190
R: [Kernel]GoldenKernel[v1]
but it's fine on 4.1.1?
Sent from my GT-I8190 using xda app-developers app
Good news! thanks for the work!
hello ... how come when I try to install from cwm recovery tells me failed?'ve also done wipe cache / davil
help!
maxsara78 said:
hello ... how come when I try to install from cwm recovery tells me failed?'ve also done wipe cache / davil
help!
Click to expand...
Click to collapse
What error you get?
Try to turn off signature verification check in cwm if that's what get you errors.
tys0n said:
What error you get?
Try to turn off signature verification check in cwm if that's what get you errors.
Click to expand...
Click to collapse
just tells me failed .... twrp-2.4.2.0-golden.....where you disable signature verification? I'm sorry ...
maxsara78 said:
just tells me failed .... where you disable signature verification? I'm sorry ...
Click to expand...
Click to collapse
I think it's under "install zip..." You can toggle signature verification on/off.
Anybody experience problems to backup ROM through Rom Manager?
tys0n said:
I think it's under "install zip..." You can toggle signature verification on/off.
Click to expand...
Click to collapse
thanks for the help, but also doing as you say failed me .... I do not understand ... now I try to re-download the zip .... thanks again
Custom Cyanogenmod12 kernel for the LG G Pad 8.3 V510 (GPE)
Updated 2-21-15 Added FastCharge and three other IO Schedulers to play with. Made Row the default scheduler, and turned off Knock-on by default. Use my app from the second post to activate Knock-on after each boot.
The CyanogenMod12 ROM can be downloaded from HERE
Thank you @aidfarh for all of your hard work!
Custom Kernel built from the cyanogenmod12 kernel source - Download Below
*NOTE - This kernel currently works with stock lollipop as well!
Features:
Flash Through Recovery!
Interactive Governer as default
Compiled using Linaro Toolchain cortex a15-4.9.3
o3 Compile optimizations
Knock-on enabled through app in second post
Fastcharge added as option - enable using Trickstermod
Row, Sio, Fiops, and Zen IO Schedulers added - trickstermod to change
Sound Control using TricksterMod
LCD Screen Control using TricksterMod
Fsync On/Off using Trickstermod (off as default)
User Space Voltage Control - TricksterMod or my 88sleektweaks init.d script to change.
Exfat support (2-4-15 and later CyanogenMod version)
Lots of optimizations with more to come!
The kernel source and Commits that show all changes for this kernel can be found here:GITHUB
Prerequisites
Unlocked bootloader
Root
Install Busybox for init.d support
TricksterMod is recommended for changing settings
How does this work?
Start by making a Backup of your boot in recovery, then:
Flash the latest version in Recovery . Proceed to the downloads below, download to your tablet, reboot into recovery and install the zip --That simple!
if you want to build your own kernel start to finish with complete instructions, you can follow my guide for rolling your own kernel HERE
Please hit "Thanks" to show your support!
DOWNLOAD HERE:
ATTACHED FILES
Knock-on app for my kernel can be downloaded here.
To add my sleektweeks init.d file, and/or the Zipalign file, see my post: HERE
Updated -SleekCyan2 - to include exfat support, LCD screen control, and further optimizations for GPU and the linaro toolchain.
Updated - SleekCyan3 - to include knock-on by default, removal of some debugging, quicker deep sleep. (better battery?)
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
galaxys said:
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
Click to expand...
Click to collapse
Thank you! Let me know what you observe.
galaxys said:
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
Click to expand...
Click to collapse
Thank you! Let me know what you observe.
Exfat support for sdcards now works out of the box with CyanogenMod version 2-4-15 and later.
So I flashed this last night when I saw you posted it recently and this morning I checked it and it had zero battery drain overnight, very nice. Can't wait to dig in a little deeper when I get time. Between this and the new CM12, 2015 is really shaping up to be a good year for the old (but great) v510, finally, thank you.
Sleekmason:
I should be able to use the same sleektweaks and zipalign stuff from the Lollipop kernel, correct?
Thanks
techinv said:
Sleekmason:
I should be able to use the same sleektweaks and zipalign stuff from the Lollipop kernel, correct?
Thanks
Click to expand...
Click to collapse
Yep! The latest 88sleektweaks has voltage control table as well ( already adjusted down a bit to the settings I use). These can be changed here but be careful! TricksterMod is useful for making the initial changes to test as they won't get restored on boot. If you change them in the file and something goes wrong, you will have to remove the file using twrp.
sleekmason said:
Thank you! Let me know what you observe.
Click to expand...
Click to collapse
Just tried it with CM12 and it's a super V510 combo! Feels fast and smooth! Thanks for your XDA development & contribution.
UPDATED 2-12-15
Added Row IO Scheduler and Sound control - Change using trickster or in settings for row, and in trickster for sound control. Also added upstream fixes.
Is Row better than cfq? I think maybe it is . . . Battery will be the deciding factor for me. If anybody wants Row default for this kernel, let me know and I will implement it on next version. Regards,
I'll give it a go tomorrow, currently I've tweeked to Ondemand and ReadAhead to 512. Cool
galaxys said:
I'll give it a go tomorrow, currently I've tweeked to Ondemand and ReadAhead to 512. Cool
Click to expand...
Click to collapse
Are you finding On-demand better than Interactive? Seems like interactive is smoother to me. Also, keep in mind that the larger the read ahead the more battery is used.
sleekmason said:
Are you finding On-demand better than Interactive? Seems like interactive is smoother to me. Also, keep in mind that the larger the read ahead the more battery is used.
Click to expand...
Click to collapse
Not much difference maybe slightly faster but still analyzing with the new rom update...
BTW, did you see my post cm12 rom about GPS? Maybe you can take a look...
Row is working very good & smooth so far (speed, smooth & stable are my priorities and then battery). Think I'll stay with it; up to you if u want it as default.
galaxys said:
Row is working very good & smooth so far (speed, smooth & stable are my priorities and then battery). Think I'll stay with it; up to you if u want it as default.
Click to expand...
Click to collapse
Those who speak up get to choose! Row it is! Will update including row as default next compile.
Great kernel guide thread for those of us who like to mod & test settings in Sleek's Cool kernels!
http://forum.xda-developers.com/lg-...gn=Feed:+xda-developers/ShsH+(xda-developers)
Hey guys! So I installed ROM toolbox pro on my phone and wanna change my CPU governor to interactive but it won't let me, it keeps going back to ondemand and overclocks itself. Any help?
Hienz said:
Hey guys! So I installed ROM toolbox pro on my phone and wanna change my CPU governor to interactive but it won't let me, it keeps going back to ondemand and overclocks itself. Any help?
Click to expand...
Click to collapse
Rooted?
Sent from this galaxy
Hienz said:
Hey guys! So I installed ROM toolbox pro on my phone and wanna change my CPU governor to interactive but it won't let me, it keeps going back to ondemand and overclocks itself. Any help?
Click to expand...
Click to collapse
If you're rooted ONLY
Try kernel auditor app, it's much functional and can apply your changes on boot.