my TF HDMI port not working, when i first conneted it to TV, showed sign of HDMI on on lower right side next to time and screen started flickering, since then i could not get any connection, I got another priem and tried it with same cable cgot connectted easily, i tried with 3rd TF, and it showed HDMI sign on TF with holding end of cable but no images on TV. MY original TF does not have any other problem, WIFI is very good, no light bleeding or dead pixel, GPS is working ( it is not great) .
I really do not want sent my TF to ASUS to screw it. I wipped TF and hoping it works but it did not.
I am getting new micro cable hoping it may works?
anybnody has any suggestion
Try another cable and/or TV first.
I did no changes.please help
I have this problem too. It was working and now its not. No HDMI icon in the right corner either.
Curses! I just discoverd this same issue tonight with my Prime. I started watching a movie with my daughers, then we had to pause for a crying fit (them, not me). Prime turned off while we got through it, once it came back on the hdmi wouldn't stay connected. The little symbol in bottom right kept flashing back and forth from on then off. And now finally nothing.
I rebooted and got nothing now. The issue isn't with my tv accepting my prime, but with my prime recognizing a cable being attached. I had to sometimes push it up and at an angle to get it to register.
No wifi issue, and I love it otherwise. I just hoped this was an easy fix. Maybe not.
K--
A data wipe did nothing to solve the problem. I ended up returning it for full refund.
Same issue here... I got to watch about 2 shows of the three stoges before it went out.
I then connected my evo using the same cable to the same HDMI port on the TV and works great.
Data wipe doesn't work.....
anybody?
Related
I can see that my hdtv is getting a signal from the phone but the tv screen stays black and my phone hdmi port is fine visibly and my cord works for my xoom. My photon is stock rooted whats going on?
demigod3030 said:
I can see that my hdtv is getting a signal from the phone but the tv screen stays black and my phone hdmi port is fine visibly and my cord works for my xoom. My photon is stock rooted whats going on?
Click to expand...
Click to collapse
have you tried to restart the phone.....
yes, nothing blank tv screen no Motorola symbol and no options pop up on the phone when hdmi is connected cord is good works for other devices and when the cord is plugged into the phone the tv gets a signal but its stays blank
I have had problems with cheepie cables from monoprice. The mini hdmi connector is intermittent. Better cables work fine. You may want to try another cable.
Sent from my MB855 using xda premium
I had this problem the first couple times I tried hdmi. Then one day it started working and its been fine ever since. I'm not really sure what the problem was or how it was solved.
I don't get a menu to select mirroring anymore. I used to have it with this cable and this tv. It's not an option now. I just get a Motorola logo on the tv. Mirroring used to work a few weeks ago, so something has changed with the phone. I'm not running a custom ROM, haven't disabled anything and no special software. Rebooting doesn't help. Anyone found a fix?
the first couple of times I tried I would just get the motorola symbol and no mirroring option than a day latter I tried again and it worked. Not sure why.
Have you tried cycling through your tv settings once and than back to hdmi?
i dont know what happned. i decided to reflash the current stock through rsdlite and im now able to mirror and use my kickstand again so im happy now ill root and see if thats why it stopped working
I did a search here. I have the Prime and had great success from 12/28/11 until ICS update around 01/10/12 but since then my TV shows no signal and this lasts for several minutes so the TV has had time to communicate with the tablet.
1. I have done a Factory Reset
2. I have tried all 4 HDMI ports on the TV
3. I have tried a second TV
4. I have ordered and tried a second cable (stranger things have happened)
5. I have called Asus Customer Support
My options are of course RMA but that means no tablet for 10-14 business days or wait to see if and when an ICS update may correct this issue for me.
Am I just out of luck here and just need to give up my Prime for 2-3 weeks or do you think that an ICS update maybe on the horizon and may correct my issue?
I don't think it is an ICS issue. My conection between the prime and the tv works perfectly. BUT it does seem to take about 15 seconds before anything shoes up on the tv after I plug the cable into the prime.
aahz123 said:
I don't think it is an ICS issue. My conection between the prime and the tv works perfectly. BUT it does seem to take about 15 seconds before anything shoes up on the tv after I plug the cable into the prime.
Click to expand...
Click to collapse
Thanks for your reply. I just went back and edited my post to add that I leave it plugged in for longer than a couple of minutes. I even flip between HDMI channels using the TV remote while the Prime is plugged in. The TV just never sees it!
Mickeylittle said:
Thanks for your reply. I just went back and edited my post to add that I leave it plugged in for longer than a couple of minutes. I even flip between HDMI channels using the TV remote while the Prime is plugged in. The TV just never sees it!
Click to expand...
Click to collapse
Did you double check with another HDMI cable? Some cables of lower quality do prevent the Prime and the TV from synchronizing.
I paid $39 for Rocketfish 8' micro HDMI cable from Best Buy yesterday and attached it to the available HDMI port on the back of my 25" I-Inc monitor. My Transformer Prime didn't see that I had the HDMI cable connected until after I shut it down and restarted it, only after doing that the bootup screen appeared on my monitor and Prime and when I logged in the Prime had the HDMI logo displayed on the tray.
The problem I'm experiencing now is stability. I get constant screen flickering from the monitor when I'm viewing the Prime through the HDMI connection. It seems like its software. I have no other devices to test this out on besides my monitor as the HDMI on my HDTV is only capable of receiving 1080i.
Another sign that it seems like software that's causing the flickering is that I notice considerable lag from the mousepad cursor using the Dock when my monitor is flickering from viewing the Prime over HDMI.
the_game_master said:
I paid $39 for Rocketfish 8' micro HDMI cable from Best Buy yesterday and attached it to the available HDMI port on the back of my 25" I-Inc monitor. My Transformer Prime didn't see that I had the HDMI cable connected until after I shut it down and restarted it, only after doing that the bootup screen appeared on my monitor and Prime and when I logged in the Prime had the HDMI logo displayed on the tray.
The problem I'm experiencing now is stability. I get constant screen flickering from the monitor when I'm viewing the Prime through the HDMI connection. It seems like its software. I have no other devices to test this out on besides my monitor as the HDMI on my HDTV is only capable of receiving 1080i.
Another sign that it seems like software that's causing the flickering is that I notice considerable lag from the mousepad cursor using the Dock when my monitor is flickering from viewing the Prime over HDMI.
Click to expand...
Click to collapse
the_game_master said:
I paid $39 for Rocketfish 8' micro HDMI cable from Best Buy yesterday and attached it to the available HDMI port on the back of my 25" I-Inc monitor. My Transformer Prime didn't see that I had the HDMI cable connected until after I shut it down and restarted it, only after doing that the bootup screen appeared on my monitor and Prime and when I logged in the Prime had the HDMI logo displayed on the tray.
The problem I'm experiencing now is stability. I get constant screen flickering from the monitor when I'm viewing the Prime through the HDMI connection. It seems like its software. I have no other devices to test this out on besides my monitor as the HDMI on my HDTV is only capable of receiving 1080i.
Another sign that it seems like software that's causing the flickering is that I notice considerable lag from the mousepad cursor using the Dock when my monitor is flickering from viewing the Prime over HDMI.
Click to expand...
Click to collapse
I haven't noticed any flickering but I have only watched real steel ones mine so far. Was a 1080p mkv file and I hooked it up through my receiver. The tv is 46" so I think I would have noticed. Have you tried other files? Oh, and I use a 6' cable is bought from monoprice for like $5
rand4ll said:
I haven't noticed any flickering but I have only watched real steel ones mine so far. Was a 1080p mkv file and I hooked it up through my receiver. The tv is 46" so I think I would have noticed. Have you tried other files? Oh, and I use a 6' cable is bought from monoprice for like $5
Click to expand...
Click to collapse
I get screen flickering (or better description screen blinking) immediately after connecting HDMI to it.
I can be just viewing the Prime's desktop not playing back any video and my Monitor displaying the Prime over HDMI will blink by going complete dark and it will continue to do this randomly and frequently.
When playing back video it continues to do this and not only is it losing the picture it's also losing audio in this screen blinking problem.
---------- Post added at 05:39 AM ---------- Previous post was at 05:10 AM ----------
I just tried the HDMI input on my BenQ monitor and I get a stable connection, no blinking.
Only difference is that my BenQ monitor has no built-in speakers and it's not a 1080p monitor it's a 1680x1050 res monitor. So I'm getting an improper viewing aspect ratio.
Is there a way to turn off the audio from outputing through HDMI and keep it coming from the Prime?
Turns out my TFP works fine connected to my old Samsung 30" HDTV CRT over HDMI, I didn't try it at first because I thought the the TFP would try to output 1080p to the set which can only handle 1080i.
I'm surprised that it connected instantly to my HDTV, now I need to correct my TV's left and right fields in the service menu as it is zoomed too far in.
Does anyone know if the TFP have a 16:9 or 16:10 aspect ratio? I'll have to keep this in mind when adjusting the settings cause I want to maintain a 16:9 setting on the HDTV.
Kashban said:
Did you double check with another HDMI cable? Some cables of lower quality do prevent the Prime and the TV from synchronizing.
Click to expand...
Click to collapse
Yes sir in my original post I state that I bought a 2nd cable. Also since it was working fine before ICS and with all the things I have tried in my post it is either ICS or the port on my Prime. Or yeah somehow I got 2 faulty cables and 1 of them worked great until the update!
No I just hope it is ICS for me.
the_game_master said:
I paid $39 for Rocketfish 8' micro HDMI cable from Best Buy yesterday and attached it to the available HDMI port on the back of my 25" I-Inc monitor. My Transformer Prime didn't see that I had the HDMI cable connected until after I shut it down and restarted it, only after doing that the bootup screen appeared on my monitor and Prime and when I logged in the Prime had the HDMI logo displayed on the tray.
The problem I'm experiencing now is stability. I get constant screen flickering from the monitor when I'm viewing the Prime through the HDMI connection. It seems like its software. I have no other devices to test this out on besides my monitor as the HDMI on my HDTV is only capable of receiving 1080i.
Another sign that it seems like software that's causing the flickering is that I notice considerable lag from the mousepad cursor using the Dock when my monitor is flickering from viewing the Prime over HDMI.
Click to expand...
Click to collapse
Thanks, I tried shutting the Prime down and restarting while the HDMI cable was plugged into the TV but no dice for me.
My HDMI was working and I have watched several movies on my TV previously.
Fast forward a few weeks and HDMI no longer works! I bought a cheap cable on Amazon, and noticed the micro connection was very loose. The HDMI notification no longer shows up. I ordered a 'real' cable from mono price, but still no luck.
No picture and no HDMI notification - arrgh.
The TP HDMI connection seems very loose, even with the new cable. Looks like an RMA for me.
Sent from my Transformer Prime TF201 using Tapatalk
clenz said:
My HDMI was working and I have watched several movies on my TV previously.
Fast forward a few weeks and HDMI no longer works! I bought a cheap cable on Amazon, and noticed the micro connection was very loose. The HDMI notification no longer shows up. I ordered a 'real' cable from mono price, but still no luck.
No picture and no HDMI notification - arrgh.
The TP HDMI connection seems very loose, even with the new cable. Looks like an RMA for me.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
That's what I'm thinking too. It's not real loose but it does have wiggle room that I didn't notice before! I hate it because I'll be without it for 2-3 weeks and everything else with the tablet works great!
Ok heres the deal. I picked up a C1 model Prime the other day from Staples. My Prime via HDMI out was working perfectly fine last night, also this was the first time i tried it on this Prime. Returned many before .
Me and my GF's kid were enjoying some old school NES games via my 60 plasma. Wanted to show him our games back in the day, Excite bike, Punch out & what Mario really used to look like lol. So all was well. Had a blast playing them too via a Wii Classic controller.
Then i figured id set my Prime up to my external computer monitor so i can use it kinda like a desktop feel with a USB mouse. So i plug it up and it reads it, but the screen will just blink the mirror image & the tablet lags bad when i swipe it. Hmmm?
I thought maybe it was the monitor so i plug it back up to my Samsung 60" and now it doesn't display it at all. I am using a HDMI/Mini HDMI adapter i got from Radio Shack, which worked perfectly fine on the other Primes ive returned with no lag no probs crystal clear. So i thought that it could be a problem with my external monitor. Being it picks it but just blinks and the Primes screen acts funny. But even when i plug it up to my big screen it does nothing. Which it worked perfectly fine last night. Excite bike and Mike Tysons punch out never looked so good!
I guess ill have to get another adapter tomorrow but was wandering perhaps there is a fix. I can't see it taking a crap overnight. I even factory reset it.
Sucks too i thought i had a winner here, no other problems. Not even sure if my Staples or other Staples in the area have any in stock.
Vcolassi said:
Ok heres the deal. I picked up a C1 model Prime the other day from Staples. My Prime via HDMI out was working perfectly fine last night, also this was the first time i tried it on this Prime. Returned many before .
My and my GF's kid were enjoying some old school NES games via my 60 plasma. Wanted to show him our games back in the day, Excite bike, Punch out & what Mario really used to look like lol. So all was well.
Then i figured id set my Prime up to my external computer monitor so i can use it kinda like a desktop feel with a USB mouse. So i plug it up and it reads it, but the screen will just blink the mirror image & the tablet lags bad when i swipe it. Hmmm?
I thought maybe it was the monitor so i plug it back up to my Samsung 60" and now it doesn't display it at all. I am using a HDMI/Mini HDMI adapter i got from Radio Shack. So it could be that but my external monitor picks it but just blinks and the Primes screen acts funny. Where i plug it up to my big screen it does nothing.
I guess ill have to get another adapter tomorrow but was wandering perhaps there is a fix. I can't see it taking a crap overnight. I even factory reset it.
Sucks too i thought i had a winner here, no other problems. Not even sure if my Staples or other Staples in the area have any in stock.
Click to expand...
Click to collapse
Probably just the adapter. Perhaps you bent a connection.
mtotho said:
Probably just the adapter. Perhaps you bent a connection.
Click to expand...
Click to collapse
Thanks for the fast reply. I figured that. Do you mean bent the adapters connection or the actual Primes HDMI out connection? I just ran to Walmart hoping they had a similar adapter, no dice. Ill have to wait until tomorrow. I really hope its just the adapter.
I am super super careful when i plug it in and try not to movie the Prime at all. Its just odd that my big screen will show nothing and the prime won't even reconize it.
Where the small monitor will show its connected in the bottom right corner but just blink the image.
Found this. Others having this problem on .15 update.
http://forum.xda-developers.com/showthread.php?t=1518522
I swore that i updated to .15 before i was playing with the HDMI out, perhaps not. Ill have to see if i can downgrade and give it a shot.
But the the TV's i tired it on so far. Keep in mind it worked perfectly fine on my Samsung 60" last night. And the Prime i exchanged did work fine on my 55" LG led. But this was prior to the .15 update. As far as possible bending or tweaking the HDMI out port on my Prime... I highly doubt it. Trust me i plugged it in and handled it as carefully as if it was worth a million dollars lol. I am ultra careful with my electronics.
60" Samsung D8000 Plasma (Worked last night)
55" LG LV5500 LED (No dice) But worked on my other Prime before .15 update
42" Vizio LCD (No dice)
19" Dynex TV in on my desk (Works but flickers on & off)
Hi everyone. I just got my RAZR and have been fairly impressed with it, a big upgrade from my old SE X10.
I ran into a couple of issues though... I couldn't use the camera (no visual input from the camera, just black with the camera app overlay), and there seems to be a persistent HDMI alert, even though I haven't got a cable plugged in.
A factory wipe allowed the camera to function, but the HDMI menu is still there.
Any ideas?
I'm having the same HDMI issue. Seems to do it mostly when some form of media is running (XM radio app for me) and you move the orientation of the phone. Only started doing this recently though. A couple days. Coincidently around the first time I actually used the HDMI out. Any help would be great as this menu is very annoying and doesn't need to be running.
Sent from my DROID RAZR using XDA
I talked to Rogers and they're sending me a new device. It seems if i press lightly on the "M" in Motorola, the menu goes away. Must be a loose connection.
Ok, scratch that. It's doing it all the time now. It goes in and out of thinking an HDMI cable is connected. Also, it seems like since this has been happening my once great battery life is now diminishing, and is running slower, lags in answering phone calls, and also the camera issue is happening... but only when it thinks an HDMI cable is on.
On an interesting side note. it seems i've found a sweet spot. When I press on the edge of the phone directly above the two tiny light sensors under the "M" it goes away. When I release it, it immediately thinks the cable is connected. I can only assume that it's a bad connection on that port to the main board. I've never used the HDMI out until about a week ago and that's when the problem started.
I bought a Viewsonic g tablet on sale a year and a half ago and until this day it meets the light. (It was only touched when purchased then back to the box)
I followed the instructions to the letter (new on this) and everything seems to be working, I have a Malata zpad dock DS-A002 supposed to be fully compatible with the g tablet and I placed the tablet on the dock, connected HDMI in the TV but nothing happens.
Don't see an option in settings to select output to TV.
Many thanks in advance.
Forgot to mention, tried this on the TV which is an LG and monitor which is a Hanns-G
I have to say that this is a first so far. When I read this I went ahead a connected up my dock which is the same make and model as yours to my TV and it works. HDMI is sometimes a pain especially with the newer TV's that are out. You also got to have the dock powered up if you haven't done that. If the power cord is connected and the tablet displays the dock clock then connect the HDMI to the dock with the TV turned off. After connection is made turn on the set and make sure you are on the proper input. It should work, but if not try a different TV.
Sent from my Super BadA$$ Bionic.
Thanks for the reply
The LCD TV is a couple of years old, the LCD monitor is 3ish years old
My mother has a 5yr old LCD TV, that's another TV I could test on
The dock is powered up using the charger that came with the gTab
The tablet displays the dock clock when placed on the dock
I've tried different combinations:
Dock powered up, TV off and plugin cable, gtab on then place on dock, turn TV on
Dock powered up, TV off and plugin cable, gtab off then place on dock and power on, turn TV on when gtab is on the dock clock
Dock powered up, TV on and plugin cable, gtab on then place on dock
Dock powered up, TV on and plugin cable, gtab off then place on dock and power on
TV detects HDMI when the gtab is placed on the dock, but after 3-5 secs says no signal meaning it does detect HDMI (shows up as an option, I've tried on all 3 HDMI inputs btw) but it doesn't show up an image.
I've tried these methods in the TV and the monitor, nothing
Doesn't make sense to me since everyone in the thread hasn't had this issue, should be plug-and-play right?
http://forum.xda-developers.com/showthread.php?t=1900562
Should I backup the current install and go back to the stock crappy ROM just to test it out? (Wipe everything as instructed before doing so?)
Thanks
No since in going all the way back to stock to test it out. Have you by chance tried a different HDMI cable. You might have a faulty connection or even a dirty connection will make it loose its connection. You may also want to check to see if the TV has a default native setting set. The gtablet will display a image like a PC I believe. Will have to connect it up again to see what res. the device puts out at default.
Alright find the link up solution. I tried different ways of connection all with failure to display on my TV with the exception of this. Try it and you will be satisfied.
1st. Place you dock near your TV with power cord and HDMI cable both connected. Don't connect other end of HDMI cable to TV just yet.
2nd. Have tablet turned on and fully booted up. Then place tablet on dock and leave the dock clock displayed.
3rd. Turn on TV and set the input to the HDMI connection you are about to connect to. Then connect HDMI to that input that is in TV and the display should reflect the device.
Let me know if this works. Thanks.
Sent from my SmoOth A$$ Gtablet
Hi, yes I tried 2 different cables, different ports, cleaned up (blow air) into the TV and and dock ports (dock is brand new never used from a year+ ago)
I couldn't find a default native setting on the TV.
Really sucks that there is an awesome ROM for the gtablet and I can't use it on the bigger screen, intention was to watch Netflix and movies, besides reading
The tablet is one of those projects that never happened and when I finally manage to get it going this happens...:crying:
Read the addon that I posted. It will connect if you connect it in that order.
Sent from my DROID BIONIC using xda app-developers app
Hi Nobe, it still doesn't work. I just don't get it.
TV recognizes the connection (shows as plugged-in) but says no signal.
Unfortunately monitor is not as advanced as a TV, simply says no signal.
Faulty dock? It charges fine
Thanks
Went to stock, and image shows up fine on TV
Is there something I could change, DPI,res? on the current SmoOth install (have backups) that could potentially fix the issue?
Thanks
exmagus said:
Went to stock, and image shows up fine on TV
Is there something I could change, DPI,res? on the current SmoOth install (have backups) that could potentially fix the issue?
Thanks
Click to expand...
Click to collapse
I keep mine at 160dpi. The issue is that you have to connect everything to the dock before connecting it up to the TV. For some strange reason the dock settings doesn't recognize the connections being made. The dock works fine it is the drivers I believe that are kernel related. If you power up the dock with the HDMI connected to it, then place tablet on the dock, then connect the HDMI to the TV's input with the TV on and turned to that input. Then it should display onto the TV without issues. Done this multiple times when this came up and this was the only way for me to get the dock to display the output of the tablet.
Sent from my SmoOth A$$ Gtablet
The thing is I did exactly as you said multiple times to be sure.
Using SmoOth image does not come up
Restored to stock ROM and image shows up fine
I'm going to try a fresh SmoOth install and see how it goes or is there any way to check the drivers or make adjustments to it?
Thanks
Any advice on checking the drivers?
Thanks
Actually the drivers are there and working the way they are suppose to be. I do believe that it might in the way it is communicating with the TV still. I am currently working on something that might help out, but I want to test it fully before suggesting it since most everyone doesn't use this feature.
Sent from my SmoOth A$$ Gtablet
It is really odd that doing the same process on the stock rom works.
Thanks a lot for the follow-up Nobe
Curious if anyone found a solution to this problem? I too have the exact same issue with my Gtab even after trying the solution posted with different cables and such. Stock rom works fine though.
I'm wondering if Nobe found something