Hi everyone. I just got my RAZR and have been fairly impressed with it, a big upgrade from my old SE X10.
I ran into a couple of issues though... I couldn't use the camera (no visual input from the camera, just black with the camera app overlay), and there seems to be a persistent HDMI alert, even though I haven't got a cable plugged in.
A factory wipe allowed the camera to function, but the HDMI menu is still there.
Any ideas?
I'm having the same HDMI issue. Seems to do it mostly when some form of media is running (XM radio app for me) and you move the orientation of the phone. Only started doing this recently though. A couple days. Coincidently around the first time I actually used the HDMI out. Any help would be great as this menu is very annoying and doesn't need to be running.
Sent from my DROID RAZR using XDA
I talked to Rogers and they're sending me a new device. It seems if i press lightly on the "M" in Motorola, the menu goes away. Must be a loose connection.
Ok, scratch that. It's doing it all the time now. It goes in and out of thinking an HDMI cable is connected. Also, it seems like since this has been happening my once great battery life is now diminishing, and is running slower, lags in answering phone calls, and also the camera issue is happening... but only when it thinks an HDMI cable is on.
On an interesting side note. it seems i've found a sweet spot. When I press on the edge of the phone directly above the two tiny light sensors under the "M" it goes away. When I release it, it immediately thinks the cable is connected. I can only assume that it's a bad connection on that port to the main board. I've never used the HDMI out until about a week ago and that's when the problem started.
Related
Hey guys.
Any time I connect the phone to my computer via USB, the phone's touchscreen goes bonkers. It wont register my touch in the correct location, it jumps around and registers button-presses that I never pressed, or won't register a firm screen-press at all!
If the USB is unplugged, everything zips along accurately.
Any idea what might be causing this, and how I might fix it?
Just a quick background:
I rooted and installed the lag-fix. I encountered a problem with the lag-fix, restored factory settings, and root/lag-fixed again. The problem cropped up after the factory restore.
BTownTKD said:
Hey guys.
Any time I connect the phone to my computer via USB, the phone's touchscreen goes bonkers. It wont register my touch in the correct location, it jumps around and registers button-presses that I never pressed...
Any idea what might be causing this, and how I might fix it?
Just a quick background:
I rooted and installed the lag-fix. I encountered a problem with the lag-fix, restored factory settings, and root/lag-fixed again. The problem cropped up after the factory restore.
Click to expand...
Click to collapse
That's wacky. Since you've already done it once, I'd just restore again and see if that fixes it.
Also... not sure if this is a side-effect of the factory restore, but guess what suddenly appeared in my Widgets list??
Google Search!
BTownTKD said:
Also... not sure if this is a side-effect of the factory restore, but guess what suddenly appeared in my Widgets list??
Google Search!
Click to expand...
Click to collapse
Using LauncherPro by any chance? It's been showing up with LP since Day 1.. If not, that's pretty darn cool then.
namebrandon said:
Using LauncherPro by any chance? It's been showing up with LP since Day 1.. If not, that's pretty darn cool then.
Click to expand...
Click to collapse
Oops... launcherPro.
I've since reset the factory settings again; no luck. Still all wonky when USB is plugged in.
I'm considering taking it back to best buy and simply exchanging it for a different one, since I've only had it for a day. I would think that resetting everything to factory defaults would have fixed any software problem. Maybe this is a hardware problem that I just now noticed.
I have heard roomer, that if your usb is to low or to high of a voltage it will bork up the touch screen while plugged in.
it seems a common occurrence on many Android phones that use our style of USB port that if you use a 3rd party usb cable (i.e. one other than what shipped with the phone) as well as many 3rd party usb wall chargers that the touchscreen will either go bonkers or freeze up alltogether.
I've seen the exact same thing happen with my friends HTC MT3G and Motorola CliqXT using certain cables and chargers. Any cables/chargers that do this to my Vibrant do it to their phones too.
Interesting. I'm glad I read all this before I decided to take it back;
the laptop I had it plugged into is so fubar'd, that it would not surprise me to find that it has incorrect voltage...
This happens all the time on my Droid 2, Nexus and Fascinate. I just swipe very quickly and press lightly. However, no matter how many "tricks" I try it's still hard to flip through screens or open the correct app. Hardest task would be to navigate a website. Considering it happens on multiple Android devices and computers I never really put too much thought into it. Just figured it to be a Android bug.
Wow, never seen this. Now I do use the cable that came with my fascinate to plug into my computer, however car charger, wall chargers, and a USB charger (in my truck), I just use the cables from my Droid1. All my chargers are generics... Hmmm..
my htc touch pro 2 did the same thing when i used a gps car charger... screen went crazy
chargers
Ok. So for anyone wanting to know what's going on in the background to cause problems with your phone with crappy chargers....
I first discovered this with another touch screen player *cough*ipodTouch*cough*cough when I was trying to make a universal 4-port USB charging bay that would work with my sansa and my ...other player.
The specification that most device-manufacturing companies use nowadays for charging states that for a device to recognize a charger (and to start accepting a charge from the charger), the data pins must be shorted (connected together). This is what Sandisk, Apple, and several others are using. That is how I built my 4 port USB charger and it works flawlessly (with my sansa, ipod, galaxy, and Cowon S9).
NOW, somewhere floating around on the net are specs that state that some data must be sent/received through the USB's data cable (i believe it claims to need any 2.5V) which basically puts some resistors in to make a voltage divider.with the power and ground and data pins. THESE ARE BAD SPECS. They might have been legit in the past for some other device, but they are NOT what our phones need.
So some of the cheap, off-brand chargers are actually sending random messages to our Phones through the data pins (non-sense 2.5 volts). I haven't heard any reports of this damaging the phone or mp3 players yet, but whenever I plug mine into a charger and I lose the ability to control the screen, I get nervous b/c I know there is voltage on the data pins, and I don't know if it's the correct amount. So I get nervous
...does that make sense?
I had the Droid and the first time I saw that, it freaked me out. It seems to be an issue with touch screen android phones when they don't receive the correct voltage, whether because of a 3rd party cable, or a different computer voltage or something. I was using my blackberry mini usb charger and it would act like it had rabies. Nothing is wrong with your phone.
The charger included is plugged in next to my bed, and I'm using my Droid's USB cable in the computer without issues. That's very strange. I've never heard of this problem.
Kamar234 said:
I had the Droid and the first time I saw that, it freaked me out. It seems to be an issue with touch screen android phones when they don't receive the correct voltage, whether because of a 3rd party cable, or a different computer voltage or something. I was using my blackberry mini usb charger and it would act like it had rabies. Nothing is wrong with your phone.
Click to expand...
Click to collapse
Sorry dude. It's not just android handsets, and it doesn't (seem) to have anything to do with the proper voltage. I've taken multimeters to the chargers. They are providing the proper ~4.5-5V range. It has to be the data pins.
Although, that's just the chargers I've had. Take a voltmeter to your usb chargers (don't touch the casing at the same time!) and see what their voltage is. But a low voltage just wouldn't charge your phone, and a high voltage would damage it.
hey everyone. ive been playing with webtop and i noticed that if my hdmi cord comes out of the phone. even the slightest bit. the screen cuts out and i have to press it back it. like. this is such a slight amount a small bump could trigger it. is anyone else having this issue? (also. i cant figure out if its the cable or the phone... )
That's odd for sure. My cable holds very firmly in place. My phone even slid off my tv stand one day and hung by the cable and everything still functioned. I would think its the casing on the Atrix might not be right or the cable might not be reaching all the way in ie cable was manufactured too short on the plug end. If you have a friend with an Atrix try out their cable if not call moto they might send a replacement but that idk never heard of anyone calling about that.
But thats just my 2 cents
Sent from my Atrix
my TF HDMI port not working, when i first conneted it to TV, showed sign of HDMI on on lower right side next to time and screen started flickering, since then i could not get any connection, I got another priem and tried it with same cable cgot connectted easily, i tried with 3rd TF, and it showed HDMI sign on TF with holding end of cable but no images on TV. MY original TF does not have any other problem, WIFI is very good, no light bleeding or dead pixel, GPS is working ( it is not great) .
I really do not want sent my TF to ASUS to screw it. I wipped TF and hoping it works but it did not.
I am getting new micro cable hoping it may works?
anybnody has any suggestion
Try another cable and/or TV first.
I did no changes.please help
I have this problem too. It was working and now its not. No HDMI icon in the right corner either.
Curses! I just discoverd this same issue tonight with my Prime. I started watching a movie with my daughers, then we had to pause for a crying fit (them, not me). Prime turned off while we got through it, once it came back on the hdmi wouldn't stay connected. The little symbol in bottom right kept flashing back and forth from on then off. And now finally nothing.
I rebooted and got nothing now. The issue isn't with my tv accepting my prime, but with my prime recognizing a cable being attached. I had to sometimes push it up and at an angle to get it to register.
No wifi issue, and I love it otherwise. I just hoped this was an easy fix. Maybe not.
K--
A data wipe did nothing to solve the problem. I ended up returning it for full refund.
Same issue here... I got to watch about 2 shows of the three stoges before it went out.
I then connected my evo using the same cable to the same HDMI port on the TV and works great.
Data wipe doesn't work.....
anybody?
I just picked up an Atrix lapdock and am trying to get it working with my Razr. When I plug it in, it loads the webtop and shows the screen, but the trackpad and keyboard are unresponsive. After about 5 seconds, the screen will just show the motorola logo and the screen on my phone becomes active again. It seems like the usb portion of the lapdock is not registering because the phone shows nothing if I plug in and unplug the usb from the lapdock (I have the hdmi and usb connectors pulled out of the lapdock for testing purposes). I tried a USB mouse plugged into the lapdock with no response either, though the usb ports on the lapdock are powered up and working as the mouse lights up.
Has anybody had this problem and have any idea how to fix it? Or did I just get a defective lapdock? I have whatever the latest update from vzw is on the phone, not rooted.
did you unscrew and flip the connectors?
I have the connectors completely free from the housing to make sure they're fully seated.
I have only had problems when the connectors are not well seated (before shaving away excess plastic from the housing). So it sounds like you might have a faulty unit.
Also, be sure the phone screen is on and unlocked when you connect it. Sometimes that makes a difference.
tk76 said:
I have only had problems when the connectors are not well seated (before shaving away excess plastic from the housing). So it sounds like you might have a faulty unit.
Also, be sure the phone screen is on and unlocked when you connect it. Sometimes that makes a difference.
Click to expand...
Click to collapse
sounds like a hardware issue to me also
Well, looks like I'll be out $80 if it's defective, that sucks. I'll play with the connectors a little more, if anybody has a broken lapdock maybe I could mix and match some parts to get it to work...Or if anyone wants one for parts, let me know.
I am in the same boat with an Atrix dock and a Bionic.
Does anyone know if it's possible to just buy the piece that houses the connectors, or even just the USB cable? I'm pretty sure the USB is the issue.
I ordered this dock and it comes with the cables, so you should be able to get them somewhere.
http://www.all4cellular.com/motorola-atrix-4g-laptop-dock-hdmi-upgrade-kit.html
Sent from my DROID RAZR using XDA
Found them. http://www.all4cellular.com/motorola-atrix-4g-upgrade-kit.html
Sent from my DROID RAZR using XDA
Bionic lapdock issues, even when i have the adapters connected
Hi, just like bobzdar said, i still have the 5 second screen problem and the phone goes into screen saver mode with M logo. Any suggestions?
Very possible it's the phone, when I got my lapdock I found out the HDMI port didn't function right. If you are near a store just do what I did and take the phone and lapdock there and test both with the display models, to see if it's the lapdock or the phone
Sent from my DROID RAZR using XDA
It's USB problem
I have the same Issue here ... just got my lapdock few days ago ,,, when I connect it to my atrix it only detect the hdmi... I tried to connect my wife's Razr ... and got the same result you've got
Amazingly there are alot of people encounter the same issue ( I thought MOTO devices are the most reliable in the market but THIS change my mind)
Unfortunately I'm not in US (currently in Kuwait) so I would be difficult to find the spare part ... If you find a spare Part please tell me
OTA ICS with webtop 3.0 solved the issue for me. YMMV.
Under display in options make sure u enable hdmi
Sent from my Razr machine
My g3 is about 1.5 years old. It's been doing just great for me. I do have the hairline fracture right along the bottom base of the phone which I believe comes from stress when trying to plug in a USB chord. Mine was pretty tight to begin with and it still is pretty good.
However, I have noticed some issues the past couple of months.
Sometimes, when plugging in my original charging cable, it states it's in slow charging mode. A couple of disconnects and reconnects fixes this. This is rare but it does occur once in a while.
When plugged into a PC, I have to be carefull not to move or jostle the phone or else it acts as if I unplugged the phone and plugged it back in and then I go through all the machinations of allowing the PC to have access, etc.
Item 2 is the most annoying factor. Sometimes, I don't even touch the phone, and I'll hear the sound that the phone was unplugged and then immediately a sound that it was plugged back in. Then Windows pops up a dialog box, the status bar on my phone states it's in install mode, then the phone asks if I should allow the computer to access the phone, and then when I allow it, it's in MTP mode again.
But item 2 happens whether I'm in Charge Only mode, MTP mode, Camera mode, etc.
I'm just wondering if there is some damage to the USB port on the phone or else it might be lose from the main board? I've searched and searched and can't find anyone else with this problem.
I've tried several different cables, and it's the same with each and every one of them. And it doesn't appear the the original cable is damaged. It might be since it's also 1.5 years old, but I don't think so because using it with other devices doesn't cause this issue.
Thanks!
Both my G3 and my G Pad 8.3 are more sensitive than they used to be about their connections to both original and high quality third party ones, although mostly the third party ones.
roirraW "edor" ehT said:
Both my G3 and my G Pad 8.3 are more sensitive than they used to be about their connections to both original and high quality third party ones, although mostly the third party ones.
Click to expand...
Click to collapse
Yeah, I'll just chalk it up to good 'ol wear and tear.
It's just annoying if I'm doing something like copying files to/from my phone from/to my PC and I bump the desk or the phone and whoops! Gotta start over.
Need to look at using WiFi for it, but the worst part is if I'm using my phone to test apps I've written (emulator is not a good testing device for a lot of things). So, that also becomes an issue if I'm trying to watch the logcat and it gets interrupted, etc.