Hey all, I get absolutely horrible 3g speeds in my area on sprint, so I normally switch to the 00001 prl when I need to use data. I was just getting really tired of having to restart the phone to flash this, and restart to flash back to the sprint prl. I saw the 11115 prl can be used with the Roam Control app, so that you are always on sprint, unless you force roam with that app. Sounded great, as I wouldnt need a restart to switch to verizon data.
The problem is, the Roam Control app doesnt seem to make my phone roam. I can absolutely tell because at home, I normally get 0-1 bars of signal on sprint, but when on the verizon prl I get full bars, as there is a verizon tower less than a block from me. But when I use Roam Control to supposedly force roam, my signal still shows 1 bar, meaning I am not on the verizon network.
Anyone have any suggestions? Running InfectedROM 3.0 btw.
11115 prl is a cooperate prl... Business prl that allows 3g roaming on sprint towers. Meaning your still connected to sprint not VZW towers
Roaming, by definition, means you are not on your carrier's towers.
I have a similar issue getting it to hand off. I have selected the option within roam control to restart the phone after switching settings and the problem went away.
mikejones13 said:
11115 prl is a cooperate prl... Business prl that allows 3g roaming on sprint towers. Meaning your still connected to sprint not VZW towers
Click to expand...
Click to collapse
According to every post I've read about it, 11115 allows you to roam on verizon with 3g data, unlike the regular sprint prl's which force your phone to 1x while roaming. Thus, when using roam control, you should be able to force roam on a verizon tower.
sitlet said:
According to every post I've read about it, 11115 allows you to roam on verizon with 3g data, unlike the regular sprint prl's which force your phone to 1x while roaming. Thus, when using roam control, you should be able to force roam on a verizon tower.
Click to expand...
Click to collapse
No. it's a sprint corporate prl. Nothing Verizon about 11115.
Sent from my PG86100 using xda premium
sitlet said:
According to every post I've read about it, 11115 allows you to roam on verizon with 3g data, unlike the regular sprint prl's which force your phone to 1x while roaming. Thus, when using roam control, you should be able to force roam on a verizon tower.
Click to expand...
Click to collapse
You are mixing up the 00001 and the 11115 prl
mikejones13 said:
You are mixing up the 00001 and the 11115 prl
Click to expand...
Click to collapse
Well again, every single thread I've read says that the 11115 is the better prl to use because you can stay on sprint, then force roam to get on verizon with 3g speeds, rather than having to flash the 00001 prl every time. So I guess these 6 or so threads are all wrong then?
mikejones13 said:
11115 prl is a cooperate prl... Business prl that allows 3g roaming on sprint towers. Meaning your still connected to sprint not VZW towers
Click to expand...
Click to collapse
Sigh.
It doesnt 'allow 3g roaming on sprint towers'. That statement makes no sense.
11115 on your SPRINT phone will allow some 3G roaming onto VERIZON's towers.
I strictly use 11115 all of the time.........unless I travel to an area where I'm off of Sprint's network, then I switch to 00001 for coverage since Verizon is just about everywhere.
BTW, at home today, my 3G signal strength is full bars........for the past year it's been really low and I had been connecting to my home network via wifi for data usage. Not today, it's really great so they must have made some tower upgrades.
---------- Post added at 01:18 PM ---------- Previous post was at 01:04 PM ----------
right now with 111115, my speedtest results:
ping 232ms
download 2322kbps
upload 631kbps
ycats said:
I strictly use 11115 all of the time.........unless I travel to an area where I'm off of Sprint's network, then I switch to 00001 for coverage since Verizon is just about everywhere.
BTW, at home today, my 3G signal strength is full bars........for the past year it's been really low and I had been connecting to my home network via wifi for data usage. Not today, it's really great so they must have made some tower upgrades.
---------- Post added at 01:18 PM ---------- Previous post was at 01:04 PM ----------
right now with 111115, my speedtest results:
ping 232ms
download 2322kbps
upload 631kbps
Click to expand...
Click to collapse
So does Roam Control work for you then with this prl? Again, I used Roam Control to force roam, but I can tell I'm still on Sprint's tower since I have 1 bar intead of the 6 I usually have when usingn the 00001 prl
my rom has the Roam Only option, I selected it and have the small triangle and 5 bars.....and 3G symbol, and can use the internet
ycats said:
my rom has the Roam Only option, I selected it and have the small triangle and 5 bars.....and 3G symbol, and can use the internet
Click to expand...
Click to collapse
Ok I'm running Infected Rom 3.0, I just saw that this rom has that option too. However, when I select roam only, it works for a few minutes, and I have full bars which means I'm on verizon. But after a few minutes, the signal goes away, and I get an X for no signal, and it will not come back on until I reboot.
sitlet said:
Ok I'm running Infected Rom 3.0, I just saw that this rom has that option too. However, when I select roam only, it works for a few minutes, and I have full bars which means I'm on verizon. But after a few minutes, the signal goes away, and I get an X for no signal, and it will not come back on until I reboot.
Click to expand...
Click to collapse
What version of Roam Control are you running?
MrGreg said:
What version of Roam Control are you running?
Click to expand...
Click to collapse
1.7.0, the only one i could find
sitlet said:
1.7.0, the only one i could find
Click to expand...
Click to collapse
Pirated versions of the app don't work...the app may appear to be functioning (aside from the not roaming), but the internals are essentially disabled.
If you are using a legit copy, then that's a whole different story.
MrGreg said:
Pirated versions of the app don't work...the app may appear to be functioning (aside from the not roaming), but the internals are essentially disabled.
If you are using a legit copy, then that's a whole different story.
Click to expand...
Click to collapse
It's not in the Market, and I couldn't find it anywhere else. Anyone have a link?
Edit: nevermind, found the website, I must have googled it wrong before as I couldnt find it. Purchasing the app now and will try it out.
sitlet said:
It's not in the Market, and I couldn't find it anywhere else. Anyone have a link?
Edit: nevermind, found the website, I must have googled it wrong before as I couldnt find it. Purchasing the app now and will try it out.
Click to expand...
Click to collapse
I understand people want to try out apps before buying them, but you can get a refund if you change your mind. I mention a 24 hour refund policy, but you can go longer than that, just shoot me an email if you have any questions.
I Get horrible speeds on 11115..is there another prl that could be better?
Sent from my PG86100 using XDA App
OK so roam control is now working fine, however I am still getting only 1x when roaming with the 1115 prl.
Related
I just thought I would share my results, roam control works great with this photon in Chicago. I used to have an epic and roam control didn't work here in Chicago, but it does with the photon. For those of u that don't know what roam control is, its an app that lets u force your phone into roaming. For instance at work, I have 1 bar. when I use the roam control app and set my phone to roam I get full service. But be advised too Much roaming willget u kicked off your contract. Also u need to be rooted to use the app.
sent from my photon
Can u force 3g using this on roam?, there is a way but a little lengthy
Sent from my MB855 using XDA App
I use Roam control quite a bit and was glad ti was updated to work with the Photon. When I'm roaming on Verizon the PRL determines if it will allow you to utilize 3G or 1X data. I changed mine to 1115 which is a business PRL that allows full 3G data when roaming on VZ. In fact the speeds surpass Sprints 3G in most areas.
how do you change prl? nvm did a search for it, and found it
piaa_nissan said:
I use Roam control quite a bit and was glad ti was updated to work with the Photon. When I'm roaming on Verizon the PRL determines if it will allow you to utilize 3G or 1X data. I changed mine to 1115 which is a business PRL that allows full 3G data when roaming on VZ. In fact the speeds surpass Sprints 3G in most areas.
Click to expand...
Click to collapse
Yeah i noticed the second i roam over onto verizon, the speeds blow out sprints...Although the ability to just roam at will comes in handy when im on the phone and im entering my apartment. I have no sprint coverage, i use an air rave. So before i step inside and lose my call i roam over with roam control, and bam my call doesn't drop! Definitely a rooted phones best friend!!!
Harry_Spade said:
how do you change prl? nvm did a search for it, and found it
Click to expand...
Click to collapse
Trust me its definitely worth the purchase. Also changing the prl is also very handy...just try not to roam to much, sprint can terminate your contract for roaming to much...
I've noticed mine kicks out of Vz in less than a minute, and the icon looses the triangle. When I go check the phones settings, whether I have it set to "CDMA Only" or to "Automatic", it always gets kicked back to "Sprint Only". I am on the latest update, and am rooted again.
Is anyone else having this problem, or is this an old problem you have solved already?
Harry_Spade said:
Can u force 3g using this on roam?, there is a way but a little lengthy
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
All roaming is done on 3G. Sprint's and Verizon's 4G networks are incompatible (LTE and WiMax).
In Chicago we roam on US Cellular, not VZW, and I only get 1x.
MultiDev said:
All roaming is done on 3G. Sprint's and Verizon's 4G networks are incompatible (LTE and WiMax).
Click to expand...
Click to collapse
I am wondering if there is a prl to flash for the evo 3d, sprint network is terrible arround here, I am currently using the verizon prl, although better, not as good as US Cellular in my area, expecially at work.
Thanks in advance
GGerk said:
I am wondering if there is a prl to flash for the evo 3d, sprint network is terrible arround here, I am currently using the verizon prl, although better, not as good as US Cellular in my area, expecially at work.
Thanks in advance
Click to expand...
Click to collapse
No I don't think anyone has made one of those. Is us cellular a cdma network? Have you tried the 1337, or 3137(can't remember if this is correct but it does start with a3). Or maybe even that sprint business PRL 1115 I think it is.
The Sprint business PRL (11115) only allows for roaming on Verizon I believe. I don't believe they have any roaming agreement with US Cellular, unfortunately.
I tried the 115000 and it didn't work as well as the 00001
SolsticeZero said:
The Sprint business PRL (11115) only allows for roaming on Verizon I believe. I don't believe they have any roaming agreement with US Cellular, unfortunately.
Click to expand...
Click to collapse
I checked into it, and one of sprints reciprocal roaming agreements is with us cellular. However the agreement is only for voice and 1xrtt, but no 3G. We could find out all the roaming agreements if someone put their sprint PRL into one of the PRL decoders floating around out there.
GGerk said:
I tried the 115000 and it didn't work as well as the 00001
Click to expand...
Click to collapse
Yeah, that would make sense. 01 is a custom PRL, and its targets are to force roaming on to Verizon towers. 15 is a PRL encoded by sprint for business customers. Its main target is sprint towers, but directs the antenna to Verizon towers, and all the other company's that sprint has roaming agreements for. It only does the roaming though if it can't find a sprint tower. Also with 15 it will settle for roaming towers that only have 1xrtt, as opposed to the custom PRLs that aim for Verizon 3G towers whenever possible.
Try out the other 2 PRL
there is 01337 and 31337 PRLs. I have yet to test the 31337 but 01337 works well. 00001 targets Verizon towers by default before Sprint, and if that one doesnt help you much I dont think 01337 will either as it is just a modified 00001. 11115 Wont help either as you still have some Sprint service so it still defaults to that network.
Here are 3 US Cellular PRL files for you to try:
http://www.megaupload.com/?d=EFOKA16L
http://www.megaupload.com/?d=O6JINILZ
http://www.megaupload.com/?d=9W7K02BI
15096 allows 3G roaming. Enjoy
Is it safe to install prl 15096? I have an EVO 3d with free roaming
sorry havent checked back in a while, I will give all 3 a try
Thanks
I just want to know if I'm gonna get extra charges from sprint if I use those 3 prls
mrjaydee82 said:
I just want to know if I'm gonna get extra charges from sprint if I use those 3 prls
Click to expand...
Click to collapse
First off, it is too dangerous to use any of these unless you have a plan with unlimited roaming. However even so sprint has gotten very sneaky. They have advertised unlimited roaming, but just like their unlimited data if you do too much [voice or data roaming], or a majority of your usage is roaming [even if you barely use any] your contract states in fine print that they can terminate service. Now so long as you aren't tethering a ton, or using lots of data they don't seem to mind, but if you do they send you a warning, if it persists they terminate you. You should not get charged ever with the plan you have, and you shouldn't get terminated unless you hog data. Hogging data on sprint is bad enough but hogging data on Verizon via roaming is very wrong. They won't terminate you unless you are abusive, so I hope you have nothing to worry about.
Since Megaupload is down could you please repost the prls
Thanks
Check THIS thread. A guy here on XDA is testing all sorts of different PRL methods. Hope it helps!
GGerk said:
Since Megaupload is down could you please repost the prls
Thanks
Click to expand...
Click to collapse
Here is 15094 and 15096. My roommate has u.s. cell and his prl is 15114 im gonna try to pull it later...
gunfromsako said:
Here is 15094 and 15096. My roommate has u.s. cell and his prl is 15114 im gonna try to pull it later...
Click to expand...
Click to collapse
THANK YOU SO MUCH!!! I have been searching for an EVDO US Cellular PRL for around a year now, and have never found one. I tried yours, and they work. How do you go about extracting them from a phone? I've never been able to figure that out. I really needed this since most of the places my Sprint phone roams in have little to none Verizon coverage, while there's perfect US Cellular 3G.
petarmarinov37 said:
THANK YOU SO MUCH!!! I have been searching for an EVDO US Cellular PRL for around a year now, and have never found one. I tried yours, and they work. How do you go about extracting them from a phone? I've never been able to figure that out. I really needed this since most of the places my Sprint phone roams in have little to none Verizon coverage, while there's perfect US Cellular 3G.
Click to expand...
Click to collapse
Well it depends on what brand of phone you have. The ultimate goal is get into diag mode and from there you can use QPST or DFS to pull the prl.
Sent from my Nexus 7 using Tapatalk 4
i know these prl's pretty much tell the phone when and what towers to roam on.. i think i am correct. anyway the service at my house is HORRID on sprint! i mean absolutely horrid. is there a way to edit these prl's so that my phones roam threshold to roam will be more towards verizon.. because i pretty much have to actually lose service before it roams on verizon at my house.. and even then it switches back and forth, so service is pretty much a big 0000000000 ...
can a prl be edited to pretty much stay on the stronger roaming signal (verizon) until a fairly strong sprint signal is captured.. this would eliminate the need to keep switching the verizon prl i am using to a sprint prl when i leave home so i dont draw red flags for roaming all the time!!.
What ROM are you using?
no rom.. i am not rooted.. i am just using verizon prl to get service via qpst.. i am using 0001 prl..
i am actually using 0001 verizon prl while home and then switching to stock sprint when i leave.. it would be great to not have to do this crap!.. seems the prl could be edited with better thresholds to stay on verizon while im home with crap service.
slreno said:
no rom.. i am not rooted.. i am just using verizon prl to get service via qpst.. i am using 0001 prl..
i am actually using 0001 verizon prl while home and then switching to stock sprint when i leave.. it would be great to not have to do this crap!.. seems the prl could be edited with better thresholds to stay on verizon while im home with crap service.
Click to expand...
Click to collapse
Try the 11115 PRL, it's a business PRL and Sprint won't kill your service for roaming on Verizon too much
any links to 11115 prl?
This is Sprint's 01115 PRL. I think its the same as what you are requesting. If its not, then disregard....
http://db.tt/DLuTxOer
Sent from my PG86100 using xda premium
slreno said:
any links to 11115 prl?
Click to expand...
Click to collapse
11115.zip
AFAIK, no PRL is going to do what you want. 11115 will allow you to roam on 3G more often but it won't change the threshold at which it switches over to roaming on Verizon towers. I wish there was a way to do that! I'd love to be able to tell it to switch to Verizon towers when the signal drops below 2 bars on Sprint or something like that. I think that's embedded in the radio software and not even the ROMs can access/change that. You'd probably need a custom radio update and I'm not aware of anyone "hacking" those.
Mike
I would call Sprint about an Airave
http://forum.xda-developers.com/showthread.php?t=1189192&highlight=airave
Check out this link above from an earlier thread. They might give you a free airave and that should solve the problem you are having at home.
Be careful with Verizon prl, a lot of people are getting their lines terminated because they data roam too much.
The Airave isn't that great either. The one they are giving out now is pretty horrible for texting.
mikeyxda said:
AFAIK, no PRL is going to do what you want. 11115 will allow you to roam on 3G more often but it won't change the threshold at which it switches over to roaming on Verizon towers. I wish there was a way to do that! I'd love to be able to tell it to switch to Verizon towers when the signal drops below 2 bars on Sprint or something like that. I think that's embedded in the radio software and not even the ROMs can access/change that. You'd probably need a custom radio update and I'm not aware of anyone "hacking" those.
Mike
Click to expand...
Click to collapse
If you're rooted there is an app called roam control that'll do it
---------- Post added at 03:53 AM ---------- Previous post was at 03:49 AM ----------
cniels01 said:
http://forum.xda-developers.com/showthread.php?t=1189192&highlight=airave
Check out this link above from an earlier thread. They might give you a free airave and that should solve the problem you are having at home.
Click to expand...
Click to collapse
I had to call sprint 6 different times to complain bout service at home and finally they sent me one free. I have full 3g throughout my entire house.
The airrave wont work if you don't havea home internet connection right?
Rob the plumber said:
The airrave wont work if you don't havea home internet connection right?
Click to expand...
Click to collapse
The AIRAVE requires a constant power and broadband Internet connection to
operate. In the event of an outage, your phone will automatically try to obtain
service directly from the Nationwide Sprint network if coverage is available.
Has anyone else had their data speed crap out on them after updating from 21089 to 21090? After updating this morning, I'm seeing a "1x" above my data icon now and even SpeedTest is timing out. If your data is fine, are you on a custom or stock ROM?
I'm on MeanRom v4.5, s-off with HBoot 1.4.
Not in my area its actually a lot faster now
Sent from my PG86100 using xda premium
Once again, stock PRL's have no effect on data speeds when you are on the Sprint Network. Stock prl's only affect what towers your phone connects to when roaming.
sitlet said:
Once again, stock PRL's have no effect on data speeds when you are on the Sprint Network. Stock prl's only affect what towers your phone connects to when roaming.
Click to expand...
Click to collapse
I believe you but it seems like such a coincidence that my data totally crapped out immediately after I updated the PRL. And a few others in the forums were reporting the same thing.
ur right
clankfu said:
I believe you but it seems like such a coincidence that my data totally crapped out immediately after I updated the PRL. And a few others in the forums were reporting the same thing.
Click to expand...
Click to collapse
i noticed the same thing man 1x all over the place..soo angry.... then i switched roms to venom teams and it came with 85 and boom everythings speedy again......so yeah =D
unslav3d said:
i noticed the same thing man 1x all over the place..soo angry.... then i switched roms to venom teams and it came with 85 and boom everythings speedy again......so yeah =D
Click to expand...
Click to collapse
Changing the ROM changed the PRL?
sitlet said:
Once again, stock PRL's have no effect on data speeds when you are on the Sprint Network. Stock prl's only affect what towers your phone connects to when roaming.
Click to expand...
Click to collapse
Do you have proof of this? Seems to me the prl tells the phone which towers to connect with, Sprint or otherwise. Why would they bother updating it so often, if it is just used for roaming? I seriously doubt they spend that much money on man hours just to update roaming towers.
Preferred Roaming List. Sprint phones will automatically connect to sprint towers. The PRL is only used to tell the phone what towers and frequencies to connect to when roaming.
Then explain prl 00001 that only connects to Verizon.
Sent from my PG86100 using Tapatalk 2
bcarter2000 said:
Then explain prl 00001 that only connects to Verizon.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
The PRL affects every tower the phone connects to. ON network or OFF.
The list contains data about every access point on or off network that the phone can connect too. It then has priority set for on network access points so those will be chosen over an off network access point.
Roaming two definitions
1. When a wireless device associate automatically with a different access point.
2. When a wireless device connects to another providers access point.
bcarter2000 said:
Then explain prl 00001 that only connects to Verizon.
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Because it sets the Sprint towers as the roaming towers, thus the phone thinks Verizon towers are the towers it should be normally connecting to.
sitlet said:
Once again, stock PRL's have no effect on data speeds when you are on the Sprint Network. Stock prl's only affect what towers your phone connects to when roaming.
Click to expand...
Click to collapse
YOU MIND PROVING YOUR STATEMENT?
Everyone that got the update did a profile update. SINCE THEN EVERYONE IS HAVING THE SAME SLOW DATA ISSUE! SPRINT PURPOSELY DID THIS!
Sprint's data network is crap anyway. And I highly doubt Sprint would purposefully release a PRL to limit phone's data usage.
There was a prl pushed last year that everyone got and everyone was stuck on 1x data. I think this might have been when I was on the lg Optimus s, can't really remember... But either way, I traveled quite a ways back and forth to work, data never changed from 1x. Reverted to an older prl, I got 3g back. I know prl is meant to control roaming... But I think there's more to it than that. I've seen first hand it affect more than when I roam. But I will buy that it won give anyone faster or slower speeds from the same network other than affecting HOW it connects to the network.
Sent from my PG86100 using xda app-developers app
tws101 said:
The PRL affects every tower the phone connects to. ON network or OFF.
The list contains data about every access point on or off network that the phone can connect too. It then has priority set for on network access points so those will be chosen over an off network access point.
Roaming two definitions
1. When a wireless device associate automatically with a different access point.
2. When a wireless device connects to another providers access point.
Click to expand...
Click to collapse
That's what I thought. Thank you.
sitlet said:
Because it sets the Sprint towers as the roaming towers, thus the phone thinks Verizon towers are the towers it should be normally connecting to.
Click to expand...
Click to collapse
By that rational you prove my point. The PRL does tell the phone which towers to connect with. Which in turn could effect data speed.
Sent from my PG86100 using Tapatalk 2
What matters is we need to downgrade our PRL TO 21089
Sent from my PG86100 using Tapatalk 2
I DONT' THINK you guys are getting it. how many people in here did a PROFILE UPDATE TO GET THE PRL!? IT WAS IN THE PROFILE UPDATE THAT KILLED THE SPEED! I want to know WHAT THEY PURPOSELY DID TO SCREW WITH OUR DATA!
runcool said:
I DONT' THINK you guys are getting it. how many people in here did a PROFILE UPDATE TO GET THE PRL!? IT WAS IN THE PROFILE UPDATE THAT KILLED THE SPEED! I want to know WHAT THEY PURPOSELY DID TO SCREW WITH OUR DATA!
Click to expand...
Click to collapse
Use qpst or flash back to a gb Rom & change your prl then.
Sent from my PG86100 using xda premium
Well, it would appear that something is amiss here with the PRL. I am running a custom rom, and when it was loaded, it had 21089 as the PRL. Data speeds here and places I travel were acceptable. Now this past week I was on the road to a location that according to the sprint coverage maps should be "best" for the coverage, but the entire time I was there the phone only had 1X connection at what could be described as sucky speeds at best. The fact it indicated 1X would tend to tell me it was actually roaming and not actually on a Sprint network. So is it possible that due to agreements they have in place with other providers, they show coverage in areas they actually have no towers and are using other providers towers? I may be wrong, but it is my understanding that those of us who do not have the "corporate" PRL are downgraded to 1X when roaming. Now that I am back in my home area, 3g is back and everything is back to normal.
By the way, I did not do a profile or prl update, so I am not sure when or how 21090 got loaded.
I do plan on contacting the folks at Sprint and see if they have any explanation for this level of service. Do not have a lot of hope here, but can't hurt. I will post an update if they give me anything actually useful!
Have a good weekend everyone.
Will flashing a Verizon radio to my Sprint Note 3 cause me any problems with Sprint?
I'm up in the mountains every weekend and have 1xrtt when standing next to my neighbor who has a Note 3 on Verizon, he's pulling 4gbs on 4G. I cannot connect to a server when trying to do a speed check.
I was thinking of flashing a Verizon radio for use on the weekend and re-flashing back to Sprint during the week.
What will the ramifications be? I won't be streaming or doing anything data intensive, just want to be able to use browser etc. I'm on the unlimited plan and unable to use much data due to the poor network build out in the area's I'm in.
Anyone have any experience with doing this that cares to share some insight?
I've done that using per helper from the at store and worked just fine. Shouldn't have any problems from sprint as long as you're not downloading movies or streaming large amounts of data
Sent from my SM-N900P using XDA Free mobile app
loumoli said:
I've done that using per helper from the at store and worked just fine. Shouldn't have any problems from sprint as long as you're not downloading movies or streaming large amounts of data
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your input. How long did you have your phone's radio flashed for? A couple of days at a time or did you have the radio flashed for an extended length of time? Thanks again for your help.
If you flash a VZ radio more than likely you'll get no connection at all. You can cause your phone to force roam utilizing PRL Helper and doing a search for the "00001 PRL" this will cause you phone to ignore Sprint towers unless there is no VZ coverage. Just be aware Sprint's getting more aggressive on off network roaming data. I got a warning email after utilizing half a day of 3G roaming
piaa_nissan said:
If you flash a VZ radio more than likely you'll get no connection at all. You can cause your phone to force roam utilizing PRL Helper and doing a search for the "00001 PRL" this will cause you phone to ignore Sprint towers unless there is no VZ coverage. Just be aware Sprint's getting more aggressive on off network roaming data. I got a warning email after utilizing half a day of 3G roaming
Click to expand...
Click to collapse
you dont change radios . dont listen to the second poster. you'll end up with a brick. run freezas rom has prl flash built in. i run a prl that has lte but allows roaming of 3g on Verizon towers. run it for a few months on and off no issues or letters from sprint.
piaa_nissan said:
If you flash a VZ radio more than likely you'll get no connection at all. You can cause your phone to force roam utilizing PRL Helper and doing a search for the "00001 PRL" this will cause you phone to ignore Sprint towers unless there is no VZ coverage. Just be aware Sprint's getting more aggressive on off network roaming data. I got a warning email after utilizing half a day of 3G roaming
Click to expand...
Click to collapse
Thanks everyone. I use prl helper and roam control currently. I have not used the 00001 prl yet. I know there's some custom prl's for switching to Verizon with your sprint note3. I have my phone on roam all weekend but am using a sprint corporate prl and am usually getting 1xrtt and occasionally with find 3g. I just need to be able to access google etc to find/look up things. Will 0001 prl let you roam on 4g also?