Hello!
Since yesterday i´ve a problem with the Streak 5.
It didn`t boot right.
Theres just after the dell logo the ,,Ant-War" screen (see in the picture).
I've tried everything.
Flashing the original Rom / recovery ,.... QDL repair-tool ,....
I hope you can help me !!!
mammut
same thing happened to me, turned out the ribbon cable of the screen didn't connect properly to the mainboard.
what worked for me was to release the cable(flipping that brown part what holds it).
whenever i had the ribbon cable properly attached and locked, it wouldn't work and i would have the same screen after the Dell logo.
only after i had unlocked the connector it would work.
mammut139 said:
Hello!
Since yesterday i´ve a problem with the Streak 5.
It didn`t boot right.
PHP:
Theres just after the dell logo the ,,Ant-War" screen (see in the picture).
I've tried everything.
Flashing the original Rom / recovery ,.... QDL repair-tool ,....
I hope you can help me !!!
mammut
Click to expand...
Click to collapse
Try a factory reset not the one in streakmode but the Dell reset
In the recovery menu it dosen´t matter what i klick
i dont came to the next point, also on update.pkg.
h
hardeware problem ?
it start up like everytime, but with this F**** screen.
i can unlock it blind and set the volume but i cant see anything
it start up like everytime, but with this F**** screen.
i can unlock it blind and set the volume but i cant see anything
in my opinion it's definitely not software related, because i had the same issue and tried everything software related(from changing roms, to QLD-repair tool with different roms, recoveries and trying to mess with fastboot).
only thing that made a difference and worked, was to flip the brown thing of the connector on the mainboard, and i had to tape the ribbon cable to the mainboard to let it stay in place.
u could also test ofcourse the screen by going into fastboot and typing *#301#, and then 03 (color). if it gives a failure (TE Fail) or hangs, it's a hardware failure.
yes when i start up fastboot theres the message TE Fail ....
what can i do ?
Flipping up the clip didn't work
EDIT: I changed the LCD a few days ago
Pass the test
mammut139 said:
yes when i start up fastboot theres the message TE Fail ....
what can i do ?
Flipping up the clip didn't work
EDIT: I changed the LCD a few days ago
Click to expand...
Click to collapse
When you ask for help tell us what has happened to start the problem not 5 post later
But im glad problem resolved
yes but it worked a few day´s with the new lcd
an at one moment the system crashes and i have my Ant-War Problem.
And the sensorkey´s are falshing.
Related
I had a problem with the power button not working and I was adviced to reflash the original ROM (I never did a ROM upgrade) so I picked the original and latest Cingular ROM. Flashing strated and then hung for a while @ 80% progress, few minutes after continued up to 95% progress and at that point I got ERROR 326 message (INVALID COMMAND) stating that the NBF file couldn´t be used for this phone. I dissconnected the phone and did a soft reset and what I got was the BOOTLOAD SCREEN and since then I can not make the phone exit from it. Later I tried flashing RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4, this time it went all the way to 100% progress and the congratulations screen, I made a soft reset (the only way I know to exit the bootload mode) and I got momentarly the HTC innovation screen and right away dissapeared to enter in bootload screen again.
Then I reflash ROM with RUU_Qtek_9100_AKU2_21878_024711_ESN_G4, this time it went all the way up to 100% and success screen appeared, the phone rebooted and is up and running although with inoperant power button.
Since you've successfully reflashed your phone and the power button isn't still working have you considered a hardware fault?
Look for some info/pics on how to disassemble your wizard to verify if the button is well soldered to the board
luiggi said:
what I got was the BOOTLOAD SCREEN and since then I can not make the phone exit from it. Later I tried flashing RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4,
Click to expand...
Click to collapse
Luiggi, pls tell me how to flash the phone while in the bootloader screen?!?
There's no secret to flash while in bootloader screen. Use the RUU file. It might take a little while longer to detect the phone but goes all the way to the end
Yes, it has to be a hardware issue
mestrini said:
Since you've successfully reflashed your phone and the power button isn't still working have you considered a hardware fault?
Look for some info/pics on how to disassemble your wizard to verify if the button is well soldered to the board
Click to expand...
Click to collapse
I´ll try the disassembly and perhaps is not a big deal to fix it, I got a copy of the service manual posted in some of the forums, and I´ll give it a try.
Thanks for the advice!
You just do it!
vlada said:
Luiggi, pls tell me how to flash the phone while in the bootloader screen?!?
Click to expand...
Click to collapse
Try first a soft reset while in the BL screen, if doesn´t react then do what I did:
I just plugged the USB cable and run the RUU!! As simple as that and as risky as the ROM you select not being the right one.
After ROM upload my HTC Hero show only some logo like device out of box. Nothing else is going. Button combinations for bootloader access is not working. Any ideas?
I managed to skilfully brick mine too, is a there a way to get it to boot up via key combination or using USB from a computer?
We are three now.
I know (presumably) my error: I flashed an SPL zip package that could be of the wrong type (Dream).
The boot shows the phone logo (mine says G2 T-Mobile).
The home keydown at boot doesn't work.
Is there a possibility to unbrick it?
Hope someone tells you how to unbrick it as I was about to do the update the ROM, not sure I want to do it now.
Right this is very weird as i had the same picture on my phone and thought it was bricked too..
BUT i just did a soft reset call menu end together. Then i did a hard reset as i wasnt sure if the soft one had done anything. Battery out then in and start up phone whilst holding down house and back key and then it started to boot up. So not sure if this helps anyone i doubt it as its very random but i thought id share just in case!!!
I had just flashed my radio when mine did this..
friend of mine had tha problem too, he had to send his device to htc.. 50 bucks ;-)
hmmm ... i am one of u guys now ...
no matter what key-combo i press, it just show a BOX and an arrow and a phone ... 3 sec later, phone turns off, no matter hwat key u press, it is not doing anything until u unplug the batery ... then when u turn it on, it repeat the same thing again
check if you can access fastboot via back+power when the phone is off. if so install recovery image and then install correct rom. if not i guess you're screwed, not sure though.
This guy
http://forum.xda-developers.com/showthread.php?t=556038
seemed to have the same issue and resolved it.
Hope it helps/good luck!
sonatbey said:
i bricked very bad no screen no logo not booting. anyway any helps
Click to expand...
Click to collapse
Please be more explicit as to what exactly you did.
(for someone to help you)
hey. i went to take my evo off the charging dock and then went to wake up the screen and when i do the whole screen is in rainbow, snow pixel. like all i can see normal is the status bar. i can boot and reboot, boot into recovery ( but cant see anything except the very first line on the top of the screen) but the screen is just messed up. it looks like one of this old tv's that when they loose connection they get white and black snow except mine is colored snow.
any ideas?
thanks
Shotgun4 said:
hey. i went to take my evo off the charging dock and then went to wake up the screen and when i do the whole screen is in rainbow, snow pixel. like all i can see normal is the status bar. i can boot and reboot, boot into recovery ( but cant see anything except the very first line on the top of the screen) but the screen is just messed up. it looks like one of this old tv's that when they loose connection they get white and black snow except mine is colored snow.
any ideas?
thanks
Click to expand...
Click to collapse
I would imagine LCD failure, though I can't be quite sure. Could you include a picture of it?
Shotgun4 said:
hey. i went to take my evo off the charging dock and then went to wake up the screen and when i do the whole screen is in rainbow, snow pixel. like all i can see normal is the status bar. i can boot and reboot, boot into recovery ( but cant see anything except the very first line on the top of the screen) but the screen is just messed up. it looks like one of this old tv's that when they loose connection they get white and black snow except mine is colored snow.
any ideas?
thanks
Click to expand...
Click to collapse
The same problem with my GSM Evo 3d:/
What ROM, Radio, kernel are you using? LeeDroid V5.3 and LeeDroid V4.2.1-1.94GHz-KERNEL, radio - 10.59.9020.00_10.15.9020.06 in my case
http://img515.imageshack.us/img515/543/img20120225140835.jpg
I noticed that when I removed battery and tried to boot, in the beginning screen was black and then was LeeDroid's boot-sound and when phone is supposed to ask for my PIN code the rainbow-pixel screen appears.
Could anyone make step by step instruction how to reflash ROM? I cannot see anything so I need all information (like push vol down two times). I hope it might works
Akasa Fox said:
I would imagine LCD failure, though I can't be quite sure. Could you include a picture of it?
Click to expand...
Click to collapse
really... LCD Failure... how would i fix that... here are some pics. I am running this rom http://forum.xda-developers.com/showthread.php?t=1456793 on version 1.3.
so i will post pics, and do you think rogers would be able to fix this problem or would it cost a hell of alot of money?
I'm not convinced that it's LCD failure. LCD is working (in a strange way) and in my case touch is working as well. In my opinion it might be motherboard (or anything that controls LCD). I'm going to try changing radio, rom and kernel - maybe it will work. But I really need your help with the step by step guide I mentioned in my previous post.
ok, so what are you going to try and do, are you going to try and reflash a rom?
like i can try and give you instructions, but i need to know what you want to do.
EDIT: I have downloaded and tried to run the RUU for My rogers htc evo. it is installing the rom, stock radio, and what not. so when it is done i will update and post back if that worked or not.
UPDATE: Installing the new RUU did not work, the screen is still messed up im guessing its a hardware failure. im going to try to bring it into rogers and see if they will do anything to help me out.
Something new, now my screen is completely black (but i can hear that touchscreen and touch buttons are working).
@Shotgun4 - please let me know what you'll find out.
misiolin said:
@Shotgun4 - please let me know what you'll find out.
Click to expand...
Click to collapse
I Will do That.
Shotgun4 said:
I Will do That.
Click to expand...
Click to collapse
Thanks mate
My screen is once more pixelful
I don't want to start new topic so I'll ask here:
Could anyone please help me with going back to stock rom?
My LCD is still not functional so it'll be unusual guide.
1. I open cmd and run adb reboot bootloader command (with stock rom in PG86IMG.zip file)
2. Does phone starts in fastboot or bootloader? If fatboot I need to press power button right?
3. Now phone should check for PG86IMG.zip file, what should I press to accept flash?
4. Now few minutes for flash
5. And what button should I press to reboot?
Is there any easier way to flash stock rom without working LCD? with adb commands maybe? please help me guys
misiolin said:
I don't want to start new topic so I'll ask here:
Could anyone please help me with going back to stock rom?
My LCD is still not functional so it'll be unusual guide.
1. I open cmd and run adb reboot bootloader command (with stock rom in PG86IMG.zip file)
2. Does phone starts in fastboot or bootloader? If fatboot I need to press power button right?
3. Now phone should check for PG86IMG.zip file, what should I press to accept flash?
4. Now few minutes for flash
5. And what button should I press to reboot?
Is there any easier way to flash stock rom without working LCD? with adb commands maybe? please help me guys
Click to expand...
Click to collapse
Your in diagnostic mode. Hold down the power button for 45 seconds then press the camera button twice it should reset the phone.
Diagnostic Mode, never herd about it. I tried both with phone on and off, no luck :/. Anyone has idea what it might be? (I'll post picture once more http://img515.imageshack.us/img515/543/img20120225140835.jpg)
PS
I managed to reinstall my shipped ROM, but screen is still f*cked up ;(.
Guys I have a problem. Is there any way to switch on USB debugging without working screen? I need to s-on my phone and I cannot use adb without USB debugging. My touch screen and touch buttons are working though so maybe someone could make screenshots how to switch it on? I'm on stock ROM now.
Or maybe there is other method to use step 5 of this tutorial without USB Debugging?
And one more question, If my phone doesn't connect with computer in bootloader/fastboot, does it means that I have s-on?
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??
Hi,
I am posting here for the first time here, even though I have been following and enjoying XDA for many years.
But for now I am looking for some advice/help to troubleshoot the phone of my child
and here are the details you sould know about :
- Phone model : Ulefone Metal 4G (not the Lite version)
- Problem description : Screen is black and nearly nothing is responding... no back light, no touch response, no led/screen while charging (usb to pc or direct charging).
This happened after plugging the phone on my car to charge and at that time the phone freezed on the ulefone logo screen, but never made it to the android interface. we then stopped the phone by pressing power a long time, but since that time the phone looks like dead.
- What I have tried so far :
~ start in recovery mode : by pressing VolUp+Power, I managed a few times to come to a screen with the following options
===> recovery
===> fastboot
===> normal
this is my only hope and the reason why I am asking for your help, but sadly none of these options are working and each time screen goes black after pressing the VolDown button to choose the option.
~ since I had this screen, I thought the problem might be with a corrupted partition (bootloader or any other needed at the beginning).
so I followed the steps to get the phone connected via USB and use the SP Flash Tool (I read both XDA posts and this one https://tehnotone.com/sp-flash-tool...installation-guide-including-bricked-devices/)
I installed the drivers, downloaded the TWRP recovery to try with something and so far so good I am all set to flash...
but when I start the process with "Download" and then plug the device.... NOTHING happens, the phone is never recognized.
~ I also watched some videos on how to disassemble the device, but I would only do that only if this my last chance.
This is where I am stucked so far, and right now I can't even go back to the "boot" screen with the 3 options.
Anybody already had a similar experience on this phone (or another one) ?
Any idea what I can try to troubleshoot ?
Any hope for the phone ?
Thank your for your help :angel:
Anybody out there with an idea what to do ?
You may have overloaded the battery, in which case the only option is to replace it by disassembling it and then replacing the old battery with a replacement one. Did you plug it into a cigarette lighter adapter or just a usb port? There are various things that could have gone wrong here, but I need to know the answer to the question above first.
Hi,
i am sorry I didn't check for your answer, but I finally did what you were suggesting :
disassemble phone and change some parts.
This is what I did exactly :
I first replaced the battery to realize that the problem was with the board in which you plug the usb cable and which purpose is to recharge the battery itself.