Related
First of all sorry for my english not good.
Start : with my HD2 have brick after task29 and not success to flash new ROM I'm take USB. cable out and try to open my HD2 in to boot loader by put volum down + power bottom but screen not show any image or 3 color my phone it only long vibration pull battery out waiting 30 minute and put battery in and try to open my phone to boot loader but is same only long vibration.
Now : can not do any think with it when try to plug power in my phone is auto startup and long vibration.
I'm search on google and in this forum not have some one face problem same as me please help me to fix this.
Any body please help me, I'm love it because now we can run both WM. and Android
Upppp waiting for your help
Did you try a long press of the reset-button?
You could try to put the original Stock Image from HTC onto the root-folder of your SD-Card, rename it to LEOIMG.nbh and Push Vol up + Vol down during start and follow the on-screen instructions if it works.
Otherwise use Search-Function in the forum.
ı have jtag HTC for samsung and HTC devices if u want send for repair to me..
www.sevgigsm.net/forum
admin..
I use ORT
Did you check to make sure your radio version was correct before flashing? This is probably the number one reason for bricking.
Check this thread it may help you if you did the flash properly:
http://forum.xda-developers.com/showthread.php?t=668347
i got same problem now...
no screen, no boot, vol down+ power oso same
no screen just a long vibration
anybody help?
I am using the correct radio so don't tell me I am using a wrong radio or something, I have been flashing for 4 months so I know EXACTLY how to flash.
now i can neither get into tri-color or hard reset so don't tell me to flash or smth like that, just tell me how to recover properly
Don't tell us to use search or something because seems like only 2 of us is encountering this problem in the internet
I'm exactly the same problem as TS coz it juz auto go vibrate when plug in battery
This problem actually started when I flash ROM halfway, it stucked and failed...
the device is already HSPL-ed!!!!
but why the F it cannot get into tri-color bootscreen now?
Also, I have to state that my device already got several problems before, my device was very hard to bootup as it will always stuck at HTC screen w/o red version number at bottom left corner, must keep on removing and reinstall battery and reboot until it can boot, not an issue with rom/radio/sim/sd as I tried flash proper rom and radio and remove sd and SIM.
my device also seems like got problem at the gps chip, because when using it for a few minutes, it will lost signal and never reconnects unless i soft reset, after use gps the device will also use battery VERY FAST(-100mA in standby, from -4mA).
now i cannot flash to stock completely, how do I get warranty it?
at the long vibrate, when i plug in to my pc, it will keep on got usb connected and disconnected sound
and dont know what device is connected as not shown in found new hardware and device manager
I also have been searching all possible keywords about what me and TS encountered but all linked to completely UNRELATED results(like search for long vibrations only link to people asking how to make vibration long and 1st result is this thread)
bountygiver said:
This problem actually started when I flash ROM halfway, it stucked and failed...
the device is already HSPL-ed!!!!
but why the F it cannot get into tri-color bootscreen now?
Also, I have to state that my device already got several problems before, my device was very hard to bootup as it will always stuck at HTC screen w/o red version number at bottom left corner, must keep on removing and reinstall battery and reboot until it can boot, not an issue with rom/radio/sim/sd as I tried flash proper rom and radio and remove sd and SIM.
my device also seems like got problem at the gps chip, because when using it for a few minutes, it will lost signal and never reconnects unless i soft reset, after use gps the device will also use battery VERY FAST(-100mA in standby, from -4mA).
now i cannot flash to stock completely, how do I get warranty it?
Click to expand...
Click to collapse
Silly question, but are you holding (and keep on holding) the Volume-Down button while you press the power button?
of course YES
i told you i have been flashing for so long
Leo from T-Mobile. Hi! I've got same problem. After flashing new (next) rom phone definetely died. Phohe is currently simfree and with HSPL. Only one reaction is short vibration after press power button. I searched everywhere. My phone has no bootloader but system see him as Qualcom CDMA Technologies MSM. Thats all, any ideas? Please and thanks for advice.
czaruch said:
Thats all, any ideas?
Click to expand...
Click to collapse
Yes, you flashed a non tmous stock rom that included a ..51.. radio and it destroyed your phone.
What rom? exact filename please.
thank you so much.
I bricked a Leo with the .51 radio. I think I read that is a European or otherwise foreign radio. Since your ROM has Euro in the name.......
czaruch said:
ROM_Leo_HTC_WWE_EastEurope_1-66.
Click to expand...
Click to collapse
The full filename for that rom is
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Si gned_15.32.50.07U_2.07.51.22_2_Ship.exe
it comes with a version x.xx.51.x radio, and they do Not work on tmous (t mobile us) phones. They kill them
Your phone is dead, sorry. No known fix.
warranty or repair (or JTAG if you are brave and have the money)
a friend of mine bricked his phone. he then tried to microwave it, but that didn't work after that he took a power wire from an old computer, cut it and connected it directly to the phone's parts where the battery would go...this completely f-ed his phone up (he also used a lighter to fake a powersurge of the battery). Then he called htc and a few weeks later he got a new hd2!
GOOD LUCK
lol, he doesnt need to do any of that, its allready as dead as it can be. Loads of epople have had them replaced under warranty with this kind of brick. It wont start, so htc/tmo cant see that its been hacked.
Hi! I understand and realy sad. Somebody know where could I fix it in UK? And how much for this pleasure. Thanks.
i would contact htc, see what they have to say. (dont say you flashed it, it just stopped working")
Hello people, thanks for reading and trying to help in advance hehe
ok here it goes ....
i bought a galaxy tab 10.1v "Australian Vodafone Version" a while back, and since me and other users that own this pices of **** didn't get updates and stuff i decided to "unlock+Root+rom". I did that successfully after following guieds:
unlock :http://forum.xda-developers.com/showthread.php?t=1064793
root+room: http://forum.xda-developers.com/showthread.php?t=1079781
Everything wsa fine and i had the super user and everything, but in the second guide it says it is recomended or something like that to download ROM Manager from the market which i did, and i started the app and and did a backup. My Tab rebooted to a blank screen , i waited for a while but with no luck so i turned off and tried to go to DW mode or recovery mood so i can at least connecte it to odin3 and do something. When press V- + Power theres no DW nor recovery mode all i see is one smmall line on the left top corner that says "Booting Recovery Kernal Image#"
When i plug the usb into my computer nothing happenes no sound , no new device installing no nothin. but since i have been reading alot regarding this issue, i read something about APX mode and NVflash here and many other websites but i followed this guide :
http://forum.xda-developers.com/showthread.php?t=1130574
i got my tab connected but i couldn't do NVflash because whenever i do
"--sync" or "nvflash --bl bootloader.bin --go"
i get this :
Nvflash started
rcm version 0X4
Command send failed (usb write failed)
some say that that means the device is locked eventho i pretty sure it not because i had the lock logo. anyway ...
just to answer every possible question in advnce and give more info :
*its a 10.1v "Vodafone Australia Version"
*was working fine after root/rom
*stoped working after using the app "ROM Manager" (i think its not compactible)
* the device on somekinda boot loop, the screen would turn on and off "blank screen with nothing in it no sound also"
* pressing Volum down + Pwer will taking me to a blank screen with one little line that says "Booting Recovery Kernal Image#"
*when i plug the usb to the computer nothing hapenes
* in APX mod is working but i cannot do anytning since the NVflash won't work.
* I followed everything step by step
Does that mean my device is useless ? is there anyway to get it back to life ?
Thank you and sorry for the spilling mistakes as im using a F'ed up keyboard
one more thing i did :
I let the battery drain overnight and pluged charged it again hopeing that will help, the battery logo won't even show up, just a blank screen
thanks
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
Click to expand...
Click to collapse
ops sorry about that, my bad
Hi Barry. Welcome to XDA. One quick suggestion: If you want to get help in an enthusiasts forum, don't call the object of everyone's affections a "pices [sic] of ****."
We all understand the stress of having non-responsive electronics; but you'll catch more flies with honey...
***edit. Wrote some stuff for you only to realize that you're on a 10.1v. Not sure how I missed that in your title (and thus, I suppose I can't comment on whether or not it really is a POS!). Until just now I never realized how different your tab is from the regular 10.1 (guides are much more difficult to follow!) Anyways, I found these threads that might be useful to you:
http://forum.xda-developers.com/showthread.php?t=1083517
and
http://forum.xda-developers.com/showthread.php?t=1232664
Good luck!
slack04 said:
Hi Barry. Welcome to XDA. One quick suggestion: If you want to get help in an enthusiasts forum, don't call the object of everyone's affections a "pices [sic] of ****."
We all understand the stress of having non-responsive electronics; but you'll catch more flies with honey...
***edit. Wrote some stuff for you only to realize that you're on a 10.1v. Not sure how I missed that in your title (and thus, I suppose I can't comment on whether or not it really is a POS!). Until just now I never realized how different your tab is from the regular 10.1 (guides are much more difficult to follow!) Anyways, I found these threads that might be useful to you:
http://forum.xda-developers.com/showthread.php?t=1083517
and
http://forum.xda-developers.com/showthread.php?t=1232664
Good luck!
Click to expand...
Click to collapse
i apologize for that, but i was referring to my tab only ... anyways
thanks for your reply and for the links you gave me .. but still the biggest problem is i'm unable to connect my tab to odin, and downloading mode and recovery mode are not even there .. theyre all gone, only APX mode is working and even with that, NVflash won't work and i would give me this error
"Nvflash started
rcm version 0X4
Command send failed (usb write failed)"
if i could connect to odin i could actually do something, or even NVflash i could run bootloader and it would install image files and all.
i'm not sure if i can do anything with APX other than NVflash .. or if i could somehow bypass Nvflash error ..
i just have a feeling that my tab won't make it
Just an idea... did you try to do the work with another pc?
For example a fresh XP 32bit install on another pc.
This "usb write error" seems strange.
Max
gfreeman86 said:
Just an idea... did you try to do the work with another pc?
For example a fresh XP 32bit install on another pc.
This "usb write error" seems strange.
Max
Click to expand...
Click to collapse
Thanks for replying. .. Yes i tried with anither pc. . I have read in this forum and others that this error means that the tablet is somehow locked even tho it wasnt before i root/rom it
Its like not writable, ill install a freah xp pro and givr it another try since i tried only win win 7
Did you try to drain completely the battery and then charge?
http://forum.xda-developers.com/showpost.php?p=19519586&postcount=15
seems it worked for someone
gfreeman86 said:
Did you try to drain completely the battery and then charge?
http://forum.xda-developers.com/showpost.php?p=19519586&postcount=15
seems it worked for someone
Click to expand...
Click to collapse
Yes i did as i metioned in my post, didnt help
When i charged it after i drained the battery, the screen light will turn on but no battery logo or anything.. The only thing that would show up on the screen is when i try to enter downloading mod/recovery mod by pressing power+volume is a little line on the top right corner which says : " booting recovery image# "
thank you for your reply, what do you guys recommend since i can access APX mod, will i be able to do anthing other than nvflash in APX mod?
Since you are getting a usb write error as well as no charge indicator, is it possible that your USB cable is bad?
sgip2000 said:
Since you are getting a usb write error as well as no charge indicator, is it possible that your USB cable is bad?
Click to expand...
Click to collapse
thanks for your reply
when i charge, the tablet does charge but no Battery logo, i can tell its charging because the screen lights will go on.
what i have tried so far :
* installed APX but when i try to nvflash it says something like writing failed
* tried both windows XP and windows 7
* drained the battery twice for 2 days
* changed USB cable
* tried to connect it to different versions on odin but computer only recognise the device in APX mode
* device still showing ( booting recovery kernel image#) when a try to access DW mod.
it all started when i used a backup program after rooting it, i don't get .. is its a backup it shouldn't delete everything (the system) and brick the tablet...
whats Kernel ? << noob
any new ideas guys ? is there any other programs/methods out there ?
anyone have the same problem ?
thanks
-Bazza
When it says booting recovery kernel image, did you try to just wait for about 15 to 20 minutes to find out if it boots again, or try logcat command?
djden said:
When it says booting recovery kernel image, did you try to just wait for about 15 to 20 minutes to find out if it boots again, or try logcat command?
Click to expand...
Click to collapse
yes, i left it like that till the next morning
** update **
Today i disassembled my tab after i read somewhere in this forum that i might get it back if i take the battery out or unplug the screen cables. Some claim that the touch screen could cause the tab to go into a boot loop; however that didn't work
i decided anyway to buy a new tab either Asus Transformer or Galaxy 8.9, even tho I'm kinda worried that this thing could happen to my new tab when i try to root it and install roms. I don't want to spend that much money until i figure out the problem, so i'm making this tablet "A testing Device" i'm gonna test every possible way to revive it for me and and others. I'll do my best with your help guys to solve this so we can provide help for others.
There was a Guide here in this forum about JTAGing that tablet along with a software that some company use to unbrick devices but i cold not find it, my cousin owns a hardware store and i could use everything i need .. i just need someone to guide me.
Thanks
Sounds like a cool project, sorry it cost so much.
zBarry, You should try this while you can, It sounds simple as it is but it worked for both my tablets that had the 0x4 aka locked bootloader. Sorry if you had already "Lego" lized your tablet into pieces but this may help. :]
http://forum.xda-developers.com/showthread.php?t=1478361
bumb!
im still looking with no luck ... please help ?
can i do anything with linux ?
zBarry said:
bumb!
im still looking with no luck ... please help ?
can i do anything with linux ?
Click to expand...
Click to collapse
As far as I know linux won't help, what % is your tablet charge at? Since you've opened it already why not just de-attach the battery and reattach it back and try to power it directly into fastboot. Normally draining is the same as stopping the flow of current into the tablet. Unlike phones where you can pop out the battery you can't do it to the tab unless you've opened it.
Can you please let me know what steps have you tried so far? Would be nice to know in detailed So I can help you out at best.
Misledz said:
As far as I know linux won't help, what % is your tablet charge at? Since you've opened it already why not just de-attach the battery and reattach it back and try to power it directly into fastboot. Normally draining is the same as stopping the flow of current into the tablet. Unlike phones where you can pop out the battery you can't do it to the tab unless you've opened it.
Can you please let me know what steps have you tried so far? Would be nice to know in detailed So I can help you out at best.
Click to expand...
Click to collapse
i think i have third every possible way out there... and the steps that i did to revive the device your way was :
i taped the power button and left it for like 2 days, then i plugged it to the computer in APX mode to check if its drained or not, but i think it was charging off the computer. So i repeated the first step and left it for 3 days, then plugged it into the socket. after couple of mins the screen turned on, but no logo or anything, just black screen (same issue). i decided to disassemble the device to take the battery out which i did and yet same result. i had hope so i re-did the battery drain thing and left it for a week and when i plugged it i pressed pwr+ vlo + and something.
my tab turns on, but just a black screen it won't that up, and power + volume up will show me a kernel message.
thanks so much, i aprreciate your trying to help any other way you think i should try ?
What sort of kernel message do you get? As far as I know maybe perhaps the contact's arent touching properly? Seems to me you did everything right but when it turns on you don't get the charging icon.
The good part is the display works and atleast you can boot up *Somehow* the bad part is you can't get it into Fastboot mode.
As far as I know the tablet is supposed to light up but have you checked if you get the offline charge icon (That green battery that sits in the middle of the screen and charges?) once you get it to drain/disconnect you should leave it to charge via wall socket for about 5-10secs for that icon to pop up. If you get that icon atleast then you know you are getting somewhere
I wish I had the tablet in hand so I could see what's going on. The whole oceans away solution makes it hard to guess what's happening
Hey, This is my first post so hopefully i didnt pick the wrong section to write in
So here it is.. A while ago my phone started acting crazy.. voice command started up.. turned off, started up again.. MTP started ( like i was plugging in USB cable) on and off and on and off again.. This was after i had rooted my phone for the first time.. but i was on stock rom at that point when all happend..
Now when im trying to charge my phone it takes like 30-60 sec till it starts charging.. same when i unplug the phone, takes 30-60 seconds for the phone to realise that there is no cable connected to the phone..
Can't turn off the phone.. when i turn it off its black for a few seconds then the samsung logo pops up and the phone boots up again.. and some times when i turn off the phone the battery logo appears and it shows that the battery is over heated..
This is what i have tryed:
- Re flashing, alot of diffrent roms
- Factory reset
- Format System, sd card, data
- Flash back to stock rom
Thx / Wrix
I remember seeing this issue in a few threads last year. Check this thread out as it lokos to be the same issues they were having http://forum.xda-developers.com/showthread.php?t=1174291&page=6
It seems some had to return their device and others were able to get it working again by cleaning out the micro usb port with a toothbrush. Worth trying. If nothing works, maybe you will have to return it. Hopefully not though
Thx alot.. Will take a look at the link you posted and see if there is something i can do to fix this issue.. hopefully i wont have to send it in to repair cuz i have rooted it.. dunno if samsung can see that if i use USB Jig ? hopefully not but will try with toothbrush to see if it works!
Again thx alot for the advices
EDIT: Toothbrush didnt work at all ;(
/Wrix
Just make sure you reset the counter and you should be fin returning it.
Your device should still be under warranty. I'd wipe, flash the stock ROM that you had on it when you bought it and use the jig if you have one. Then see about getting it returned. Good luck!
Hello,I have a serious problem with my i9100g, at first the phone didn't wan't to charge, i changed the kernel and rom, and made some random stuff, and it worked, and the phone charged again, and after a while about 2 weeks or so, The same problem happened, but this time I tried every thing i did before and some other things, but with no help, then i decided to flash the official rom, but the phone is not recognized by the pc, after that i made a huge mistake, i used the mobile odin - on an unsupported kernel I believe - to flash the official rom, but what happened is i'm stuck now on the samsung screen boot, can't connect it to pc and can't charge the mobile BUT *there is a strange thing* I used a charger that lit a green lamp when the phone is charging, it turns green when i connect it while the phone is closed "but when the phone starts to open that green battery that shows that it's charging -or when the mobile is on- it stops charging"
SUMMARY ON MY PROBLEM:
My Mobile Phone is I9100g
The Phone is stuck on SAMSUNG boot screen (Because I used Odin Mobile)
It doesn't charge nor connect to the pc (it's not a hardware issue i believe, because it charges when it's off but when the phone starts to open that green battery that shows that it's charging -or when the mobile is on- it stops charging")
Sorry for my bad English
Thanks in advance
EDIT:
SOLVED
All I did was using a TOOTHBRUSH to clean the port without dissembling the phone after that the pc could recognize it then I flashed the stock rom and now it charges and works well
No help until you use a descriptive thread title. You were perfectly able to post a couple of paragraphs in stupid coloured fonts to describe your problem, you can post a descriptive title :-/
Edit - If replacing the USB board/port yourself (KeithRoss39 has a guide in General which will enable you to do this quickly/cheaply/easily) doesn't fix your problem, service centre = replace motherboard.
MistahBungle said:
No help until you use a descriptive thread title. You were perfectly able to post a couple of paragraphs in stupid coloured fonts to describe your problem, you can post a descriptive title :-/
Edit - If replacing the USB board/port yourself (KeithRoss39 has a guide in General which will enable you to do this quickly/cheaply/easily) doesn't fix your problem, service centre = replace motherboard.
Click to expand...
Click to collapse
Better now?
actually those stupid colors to show the important lines for those who are lazy to read all that
anyway thanks for your help, I'll see this guide now
EDIT: I actually didn't use this guide i just cleaned the port with a toothbrush and it worked thanks anyway
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
UKrugger said:
I got a P9000 in the late spring, and have been really happy with it. Unfortunately I dropped it on the ground, and the screen cracked, after which the touch function did not work (but the phone did) I finally managed to get a new screen from China, and it has been installed by a local shop dealing with mobiles. However, the shop told me they could/would not deal with anything else but changing the LCD screen. The phone switches on (I can hear starting jingles and emails downloading etc) but the screen just turns from black to dark blue and stays that way. I have been trawling through the forums, but not sure what to do next. Take it that I need to flash it, and have followed the instructions given here, but it just seems to time out. Anyone got the patience to walk me through this?
Click to expand...
Click to collapse
I am facing same thing here. The screen is not coming up at all, But I can hear sound too. ANyone else who has changed the screen successfully before?
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
DonMagnifico said:
yes, i changed the screen successfully. After screen replacement i flashed the newest rom with flashtools and all was ok.
Click to expand...
Click to collapse
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
UKrugger said:
Can you describe the precise process you followed. I seem to get stuck when I try to flash the phone
Click to expand...
Click to collapse
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
change screen start logo screen after light on/off all the time 2sec
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
thank you to help me, all the day i'm trying solutions,after the screen change, Flashtool tell sucess download, but it continues to turn on and off with the logo elephone starts. in peripheral it appears and disappears every two seconds. i don't know if there is a room in my phone. how to inject the files in the phone with a Peripheric always on and off. help me please. after flashtool ok download the screenis black and nothing i move battery and after logo elephone on/off but nothing else. someone know the reason on/off and appear an desappear in device : Mt65xx USBVCOM.
tanguy66 said:
hello, thank you for you help. i've change the screen p9000 and when i put battery the screen logo elephone turns on and turns off two second always.is it normal and is it essential new flash when you put a new screen. in periph manager i see two second USB Vcom MT 65xx preloader but it's disapear 2seconde all the time because logo elephone light on and off two second. If you give me a solution, you are the best.
the pc don't recognize telephone of course. but i'm tm trying your methode but i've meet difficult with install pilot.
thank you XDA
Click to expand...
Click to collapse
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
DonMagnifico said:
You are in a boot loop. This is not a bad sign, now you know the screen works. It's normal that you have to flash the Rom again after replacing the screen. if you use flashtool, start download in flashtools before you connect your phone to the PC, then hold vol+ on your P9000 and connect the phone to the pc.
Click to expand...
Click to collapse
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
tanguy66 said:
always the same problem: light on off all 2 seconds, with B+vol+ i see recovery 1 seconde. i haven't the time to do something. question is it possible the battery bad, the logo flash all the time if the battery bad the logo don't go isn't it. please help i'm trying plenty solution but no good . thank you.
Click to expand...
Click to collapse
no, it's not the battery. You made a mistake by flashing the rom, now you are in a boot loop. Ignore the message on the screen. Try to flash the rom again. start flashtool, select the scattertext, click download, hold vol+ button on the phone and connect the phone to the PC
PLEASE HELP me, can you give me a solution to start up the phone again
hello , before flash tool all is ok flashing GOOD, now it's more bad now i have no lignt no logo, and when use flash tool always stop download 20% BROM error: status dowwnload exeption (0xc0050003) (HINT) : , i don't know if i have a good battery
yesterday i have a new image appears it'a big beautiful battery only one bar after logo several times. i'm found an d try all solutions, 4 days , i sleep at 1 oclock. help to find a solution. how to know or test if the telephone is dead or little life.
OK now i arrived with flash tool i begin all zero, and message OK Good, i'm verry worried, no light , no logo??have you a solution to know if the battery now? thank you help.
do you know when the message tell OK,it means all things an room is now ok in the phone. I'm not sure
just now i'm testing battery with tester 3v 1ma it's good. how to do to light screen now. it's strange.
and with electric power it must work normaly ,or not if the battery dead?
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
DonMagnifico said:
skeleton1911 describe in this thread how to flash the P9000:
http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
in this thread from skeleton1911 you find all links to the needed files:
http://forum.xda-developers.com/showpost.php?p=66784596&postcount=146
Click to expand...
Click to collapse
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
DonMagnifico said:
i think you flashef the wrong preloader. flash the phone again with the newest firmware. in #5 you find a link to the needed files.
Click to expand...
Click to collapse
thank you. i use flash tool v5.1620. i have windows 7 32 bit,mtk 65 vcom is update, i'm not sure what do you mean. newest firmware. i have last room for p9000. can you tell more details please or more link to succeed. i read, and i trying a lot, now i swimming again.
UKrugger said:
After a couple of tries, I did manage to get this working. Initial failure seemed to be me not pressing the "Vol +" button. Thanks very much for your help
Click to expand...
Click to collapse
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
tanguy66 said:
ok , i don't understand with flash tool i have plenty of time a big download is ok, if the download is ok why it's doesn't working.
the phone is often remains dark. I put in charge the battery with two 2mn special machine at my work , and it's wake up the phone souddenly appears again the elephone logo and battery with 1 once bar, I don't know if it's me or the battery or something else. normally if I plug in USB i must have lignt Electric power? but nothing.
thank you and not let me down please i need you.
Click to expand...
Click to collapse
Sorry, I can' t help you more. All I know i telled you. But write a private message to skeleton1911, he has a great experience in reactivating Phones. May be he can help you.
P9000 screen replacement
Hi . I had my p9000 about 2 months when I sat on it and cracked the screen,the casing was very slightly curved so I gave it to a shop to repair,now nearly 2 months later they say they can't get it to start up. They tried a new battery and I told them what I'd read on this forum regarding flahing the rom but They gave me back the phone with a new screen and nothing else, so I told them i'm not paying for 1/2 a repair and told them to remove the new screen and give me back the phone as it was . What do you think could be the problem if a repair shop cannot repair a screen and install new sorftware is there hope for it?
Hi, i broked my screen again so i am not a newbie about this... but this time after flashing the Phone show nothing at all... the small LED Dot is shining when android is boot, so i dont think the cable is connected wrong. The touch works fine..What can it be??