Friends, this problem was low memory on my lapdock when used as a webtop.
The resolution of the problem was the discovery that I installed a custom recovery image, do not get it too, but I took the test without the custom recovery, and did the test with one I like is that the recovery-cyan-atrix5 . img, result with the original firmware recovery was over 50% of free RAM, and the recovery-cyan-atrix5.img 20% to usage total.
Regards to all and hope to have contributed to this doubt.
Excuse my English, I'm from Brazil.
Excuse me, but i didn't understand.
Will you translate it to portuguese?
---------------------------------
Bicho, boiei.
O q tem o cwm com a porcentagem?
Vc fala que a culpa é do cwm?
Please help... heheeh
É assim, quando instalei o cm7 e quando eu usava o lapdock ficava dando que a memória RAM estava cheia, ai formatei o celular e novamente e o conectei no lapdock e ficou otimo, só que instalei o cm7 e deu memória cheia novamente, ai percebi q quando eu instalava o mode recovery ele ocupava a memoria RAM ao invés de ocupar a memória interna de instalação. Abraço.
Sent from my MB860 using XDA App
hey I not sure i am getting what your saying. but the problem i am having now is that I Had a atrix 4g that i sold to my buddy. the phone is on stock rom and the only thing i did was rooted it and unlock bootloader. my buddy is not having same problem with his lapdock being low memory. can you please be more clear on the steps your use to fix it and what files you used?
thanks
rhaybass said:
Friends, this problem was low memory on my lapdock when used as a webtop.
The resolution of the problem was the discovery that I installed a custom recovery image, do not get it too, but I took the test without the custom recovery, and did the test with one I like is that the recovery-cyan-atrix5 . img, result with the original firmware recovery was over 50% of free RAM, and the recovery-cyan-atrix5.img 20% to usage total.
Regards to all and hope to have contributed to this doubt.
Excuse my English, I'm from Brazil.
Click to expand...
Click to collapse
I Found
When you install something by CWM, it fills entire RAM.
I've tested with AURA ROM and realized that Stock Roms, that doesn't have any mod in ROM/RAM, have space to run aplications.
After installed Aura, I've made a WEBTOP2SD... But it didn't work.
I 've installed Stock TIM-BR 2.3.6... and... voilà!!!
====================
Quando vc instala alguma coisa pelo CMW, enche a RAM
Euj testei com a AURA, e percebi que as Roms Stock, que nao tem nada ocupando espaço na RAM, tem, claro, RAM de sobra pra rodar os apps
Tentei fazer o WEBTOP2SD, mas nao rolou.
Aí voltei pra TIM 2.3.6 e prontinho...
Valeu!
Related
staff, I want to ask a question:
found this post on the Internet:
http://www.freeyourandroid.com/guide/porting-android
I carry a CM9 Xoom doing this procedure with the original files on CM9 Atrix? (assuming the hardware is the same) ....
I run the risk of ruining my Atrix?
I changed the rom Xoom by the boot.img used in CM9 Atrix, Atrix not spoiled, but also to take off ..
I know if it works the appearance is equal to the Xoom, it is my intention, I want a mini tablet .. is this possible?
Pt-br
encontrei este post na internet:
http://www.freeyourandroid.com/guide/porting-android
posso portar um CM9 xoom fazendo este procedimento com os arquivos originais do CM9 atrix? (supondo que o hardware é igual)....
eu corro risco de estragar meu atrix?
eu já troquei o boot.img da rom xoom pelo usado na CM9 atrix, não estragou o atrix, mas tambem não arrancou..
eu sei que se der certo a aparencia fica igual ao do xoom, minha intenção é esta, quero um mini tablet..isso é possível?
I can't post in the original link so... (only developers) Sorry my bad english, i'm from Brazil. My phone is a BELL - MB860 (Brazilian) bootloader unlocked, which: 2.3.6 (non Stock), CWM romracer recovery 5.0.2.7, Radio: N_01.100.00R_europe_retail. This ROM Laytveyit works in my phone? Only apply the zip folder in the recovery?
Tnks for any help, and sorry for any more else.
bytiko said:
I can't post in the original link so... (only developers) Sorry my bad english, i'm from Brazil. My phone is a BELL - MB860 (Brazilian) bootloader unlocked, which: 2.3.6 (non Stock), CWM romracer recovery 5.0.2.7, Radio: N_01.100.00R_europe_retail. This ROM Laytveyit works in my phone? Only apply the zip folder in the recovery?
Tnks for any help, and sorry for any more else.
Click to expand...
Click to collapse
Yes, it does. Just apply the zip in recovery and do the necessary wipes.
Tnks
MaxK47 said:
Yes, it does. Just apply the zip in recovery and do the necessary wipes.
Click to expand...
Click to collapse
Tnks MaxK47, vc fala Portugues?? É de Sampa???
bytiko said:
Tnks MaxK47, vc fala Portugues?? É de Sampa???
Click to expand...
Click to collapse
Yes, I do. I live in São José dos Campos and I study in São Carlos
--
Sim, falo português, moro em SJC e estudo em São Carlos
ROM
E aí, sou do RJ, tenho usado a 2.3.6 Epsilon, não sei se vc conhece? Vc tem usado as ROM's daqui do XDA? Se sim, qual a mais rescente JB que vc recomenda? Abs.
English please?
Even says so in the forum rules.
ravilov said:
English please?
Even says so in the forum rules.
Click to expand...
Click to collapse
OK! ...
bytiko said:
E aí, sou do RJ, tenho usado a 2.3.6 Epsilon, não sei se vc conhece? Vc tem usado as ROM's daqui do XDA? Se sim, qual a mais rescente JB que vc recomenda? Abs.
Click to expand...
Click to collapse
Yes, I used it for some time (I've used pretty much every ROM from here, save for some of the blurred ROMs, I hate blur since my blurred Motorola Quench)
I personally like the Paranoid Android ROMs, couldn't use any other since I've tried it, and probably will change to the new jellybean version in this weekend, but epinter's CM10 is pretty good, snappy and is very good and stable. I haven't used any of the new MIUI jelly bean builds, but I liked a lot when I tried the ICS builds (was using it before I learned about Paranoid Android). Try them all, just don't apply sbf files and you're set
Another thing, the community don't like much posts in another language, every once in a while I see posts in another language and it sucks to take it to google translate, so, if you're not confident enough with your english, just put it in Google translate and post with both languages.
--
Sim, eu usei por algum tempo essa ROM (usei praticamente todas as ROMs do xda, só as ROMs com blur que testei poucas, odeio o blur desde a primeira vez que usei, no meu antigo Motorola Quench).
Eu pessoalmente gosto da Paranoid Android, desde que testei pela primeira vez não consegui mais sair, e só tô esperando o final de semana pra atualizar pra versão JB. A CM10 feita pelo epinter também é muito boa, quando testei notei que é muito rápida e estável. Outra que não testei ainda os builds JB é da MIUI, mas gostei muito quando testei a versão com ICS (era minha ROM favorita antes de conhecer a Paranoid). Recomendo que você teste todas e veja qual você gosta mais, só não aplique SBFs (só em último caso) e tá feito!
E outra coisa, o pessoal aqui não gosta muito de posts em outra língua que não o inglês, é meio chato ter que pegar o texto que alguém escreveu e ter que levar pro google translate pra saber o que ele quis dizer, se você não se sentir confiante o suficiente pra postar direto em inglês, coloque o texto em português e a tradução do google translate junto
Thanks, I'll look at Max ROM you spoke. This Cell is my wife. I have a Galaxy S and it's the first time I see this MB860 apply ROM's so straight through CWM. Before scraped pacas with FastBoots, and ABD etc. was a bag! Again thanks for the tip! Tiko Abs.
As for the translation, I do not care no, they were paranoid after September 11th!
_______________________________________
Valeu, Max. Vou procurar a ROM que você falou. Este Celular é da minha mulher. Tenho um Galaxy S e é a primeira vez que vejo aplicar ROM's nesse MB860 assim direto pela CWM. Antes ralei pacas com FastBoots, ABD e etc. foi um saco! Mais uma vez obrigado pela dica! Abs. Tiko.
Quanto a tradução, não ligo não, eles ficaram paranóicos depois de 11 de setembro!
Hi Gentlemen.
I bought the Thl W5 and he came with one white dead pixel and slower i expect.
To correct the problems i decided to flash the phone with the latest update from the THL website.
For my surprise the oficial ROM from the THL do not support the Brazilian Portuguese, only english and chinese.
Could someone backup and upload the international ROM that comes with my language?
Best regards
napalm01 said:
Hi Gentlemen.
I bought the Thl W5 and he came with one white dead pixel and slower i expect.
To correct the problems i decided to flash the phone with the latest update from the THL website.
For my surprise the oficial ROM from the THL do not support the Brazilian Portuguese, only english and chinese.
Could someone backup and upload the international ROM that comes with my language?
Best regards
Click to expand...
Click to collapse
Hi!
Sorry, but I haven't found this new rom for thl w5. Where did you guys get that?
Just few more questions? How would you compare thl w5 to zopo zp300+? Is w5 gps ok? Does it have that red led bug (that would prevent phone to deep sleep)? I'm really in doubt between them...
Thanks!
THL W5 Eng / CH ROM
Hi !
The multilanguage ROM came with the W5 from Pandawill and when i ask to THL about the ROM that i downloaded from THL's website they answered "Sorry but we only have English and Chinese on the W5" ?!
I Bought one W3+ and one W5. I can't compare with ZOPO because i've never tested one.
But between W3+ and W5 i think that is very important to consider that i used W3+ during 6-7 hours installing apps and configuring the cellphone and at the end of the day the battery still remains 89% !!!!!.
I haven't any issue about the led bug, but the GPS seems not working properly. I'll test and return to you.
Hope this information has been usefull.
Napalm01
napalm01 said:
Hi !
The multilanguage ROM came with the W5 from Pandawill and when i ask to THL about the ROM that i downloaded from THL's website they answered "Sorry but we only have English and Chinese on the W5" ?!
I Bought one W3+ and one W5. I can't compare with ZOPO because i've never tested one.
But between W3+ and W5 i think that is very important to consider that i used W3+ during 6-7 hours installing apps and configuring the cellphone and at the end of the day the battery still remains 89% !!!!!.
Hope this information has been usefull.
Napalm01
Click to expand...
Click to collapse
ei napalm:! estou pensando em comprar o w5. fiquei na dúvida entre ele e o zp300+. Mas vi que o zp300+ tem alguns bugs no gps e com a luz de notificação (quando fica vermelha, consome muita bateria...) você pode dizer se o w5 tem problema com gps ou com a luz de notificação (quando fica vermelha, descarrega mais rápido a bateria)? Quanto tempo leva pra carregar totalmente o telefone?
Ah! E você achou o w3+ melhor que o w5?
Por quanto você comprou? Foi no pandawill? demorou quanto tempo? foi taxaDO?
Obrigado pelas informações!
Abraços!
THL w5
rafobr said:
ei napalm:! estou pensando em comprar o w5. fiquei na dúvida entre ele e o zp300+. Mas vi que o zp300+ tem alguns bugs no gps e com a luz de notificação (quando fica vermelha, consome muita bateria...) você pode dizer se o w5 tem problema com gps ou com a luz de notificação (quando fica vermelha, descarrega mais rápido a bateria)? Quanto tempo leva pra carregar totalmente o telefone?
Ah! E você achou o w3+ melhor que o w5?
Por quanto você comprou? Foi no pandawill? demorou quanto tempo? foi taxaDO?
Obrigado pelas informações!
Abraços!
Click to expand...
Click to collapse
Eu comprei pelo Chinavasion.com e fiquei mto contente com o thl w5, GPs td certinho a funcionar eu aconselho...não falo nas taxas pois o brasil nao é o meu país. abraço
Qualquer duvida estou pronto a ajudar...
Here is the international ROM for Thl W5
napalm01 said:
Hi Gentlemen.
I bought the Thl W5 and he came with one white dead pixel and slower i expect.
To correct the problems i decided to flash the phone with the latest update from the THL website.
For my surprise the oficial ROM from the THL do not support the Brazilian Portuguese, only english and chinese.
Could someone backup and upload the international ROM that comes with my language?
Best regards
Click to expand...
Click to collapse
You can download the international ROM from here:
https://disk.yandex.net/disk/public/?hash=BS43VF5gc7zJ7tHBisC11PpBNWD+y1Se1yA/q+/VBLA=&final=true
It can be flashed with 'SP Flash Tool' Windows software (made by MediaTek). The firmware also contains Portuguese.
I hope I could help.
Thank you so much !.
I'm on vacation and worried about to return with a half-working cell phone.
If i can help by anyway, ask me.
Thanks alot dear friend!
THL W5 and THL W3+
Olá rafobr.
Achei o W5 um aparelho muito bacana e com um visual bastante limpo (o que procuro em um telefone)
Não tive problemas até agora com consumo de bateria anormal e o carregamento se deu em torno de 1:45hs.
Quanto ao GPS ontem fiquei sabendo desse bug pela primeira vez e ativei o GPS no GMAPS, ficou um bom tempo procurando e e não estabeleceu uma conexão. Há de se levar em consideração que eu estava apenas ao lado da janela do apartamento e o tempo por aqui está nublado. Mas de qualquer forma isso nunca foi problema para meu Defy, continuarei testando para ver se realmente tem algo errado.
W3+ vs W5
Comprei um W3 para minha sobrinha e o W5 para mim. achei o desempenho dele(W3+), um pouco melhor, acredito que seja em virtude dele ter uma tela menor já que as características deles são quase idênticas, a ponto de que quando troquei a ROM e ela não vinha com diversos aplicativos, pude pegá-los direto da ROM do W3+.
Além disso o W3+, pelo tamanho fica melhor na mão, telefone de 4,7" fica muito grande e nem sempre dá para fazer tudo com apenas uma mão. Esse lance de tela cada vez maior é modismo que os fabricantes estão lançando e acho que já passou do limite.
Mas o que mais me impressionou como disse no outro post é a duração da bateria do W3+. Depois de um dia inteiro instalando uma série de aplicativos, testando e configurando ainda tinha 89% de carga !!! IMPRESSIONANTE !!
Comprei quando lançou e ficou em US$249. Sabemos como são os telefones chineses desses sites saem por um valor e caem rapidamente.
Comprei no Pandawill no começo de dezembro e chegou sábado passado. E sim foi taxado em 109,00.
ABRAX!!
Muito obrigado pelos esclarecimentos!!!
Estava lendo outros posts sobre celulares chineses similares com 'problema' no gps, talvez isso ajude:
Originally Posted by chenrp View Post
install GPS status app from the google play store.
see there if you have any satellites showing.
if not ... Houston, we have a problem!
Installed the app, cleared the A-GPS data, tried to locate satellites again and it works like a charm, so thanks. Already tested the GPS while running for few kms, accuracy quite ok.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Agora fiquei na dúvida entre o w3+ e o w5, todos os dois tem : Gravity sensor , Distance sensor , Light sensor e Acceleration sensor?
qual dos dois eh mais fino? eh grande a diferença?
e quanto os led de notificação (mensagem recebida, ligação perdida, etc)? o w5 possui?
você testou com um cartão de memoria? parece-me que alguns vem com a um cartao de memoria 'virtual' q usa a memoria interna... mas parece q tem como corrigir isso...
o google calendar funciona?
ah! qual o correios que você usou? de cingapura, honk kong ou china?
eles taxaram em cima de qual valor?
desculpe tantas perguntas!
mais uma vez obrigado!
abraços
Hi psycmos,
In the text of your personal signature it can be read: "Transform your THL W5 on MIUI ROM"
Ara you serious? How do you think that? I would be interested too but I didn't read anywhere that there is MIUI ROM for Thl W5...
W3+ and W5
Agora fiquei na dúvida entre o w3+ e o w5, todos os dois tem : Gravity sensor , Distance sensor , Light sensor e Acceleration sensor?
qual dos dois eh mais fino? eh grande a diferença?
O W3+ 2mm mais grosso e mais pesado mas a diferença não é notável
e quanto os led de notificação (mensagem recebida, ligação perdida, etc)? o w5 possui?
Como estou com ele a pouco tempo e principalmente trocando o firmware não notei se tem
você testou com um cartão de memoria? parece-me que alguns vem com a um cartao de memoria 'virtual' q usa a memoria interna... mas parece q tem como corrigir isso...
É isso é comum, normalmente eu deixo ele instalar os apps na memória interna (8Gb) e no cartão de memória eu coloco meus documentos. Faço isso com meu tablet, na Google tv e nos telefones
o google calendar funciona?
Direitinho
ah! qual o correios que você usou? de cingapura, honk kong ou china?
SINGAPURA
eles taxaram em cima de qual valor?
Nunca dá para saber os caras não abrem e colocam um valor
desculpe tantas perguntas!
You're welcome
mais uma vez obrigado!
abraços[/QUOTE]
Se eu fosse escolher novamente compraria um W3+. Cara hoje em dia bateria é tudo!
ABRAX !!!
Miui rom style!!!
ctibor said:
Hi psycmos,
In the text of your personal signature it can be read: "Transform your THL W5 on MIUI ROM"
Ara you serious? How do you think that? I would be interested too but I didn't read anywhere that there is MIUI ROM for Thl W5...
Click to expand...
Click to collapse
Transform your THL W5 on MIUI ROM
Ok. Install from Google play:
-MIUI V4 Laucher !
-exDialer MIUI theme | GO SMS PRO with MIUI Theme.
Perfect!!!
Could you please confirm whether the phone is WCDMA 850MHZ? thanks
rafobr said:
Could you please confirm whether the phone is WCDMA 850MHZ? thanks
Click to expand...
Click to collapse
According to the MTK Engeneer mode info, the working UMTS modes of Thl W5 are:
WCMDA-IMT-2000
WCMDA-PCS-1900
WCMDA-CLR-850
WCMDA-800
(I am not an expert and not sure about the meaning of those expressions, I just wrote down that the prog showed.)
THL W5
I am considering to buy THL W5. Can this phone work (THL W5) with HSDPA? And is there any custom ROMs for it, like CyanogenMod or AOKP? How to root it? Thanks.
ctibor said:
According to the MTK Engeneer mode info, the working UMTS modes of Thl W5 are:
WCMDA-IMT-2000
WCMDA-PCS-1900
WCMDA-CLR-850
WCMDA-800
(I am not an expert and not sure about the meaning of those expressions, I just wrote down that the prog showed.)
Click to expand...
Click to collapse
But their site states support for only WCMDA 850/2100?
I would like to know it if really works on band WCMDA-PCS-1900?
restorallon ncesGg
edin.gacan said:
I am considering to buy THL W5. Can this phone work (THL W5) with HSDPA? And is there any custom ROMs for it, like CyanogenMod or AOKP? How to root it? Thanks.
Click to expand...
Click to collapse
No there is no ROM at the moment except the official one.
And yes root is very easy.
root: google on randomness0110.blogspot.nl
w5 english rom
ciao,
have the english rom google play installed? i have a modify rom but the battery life is very poor and i would try the original rom.
thanks
roosvy2 said:
ciao,
have the english rom google play installed? i have a modify rom but the battery life is very poor and i would try the original rom.
thanks
Click to expand...
Click to collapse
The original rom has an excellent battery life but you have to root it, install play and remove all Chinese apps.
location of the original rom : google thl168.com
root and install play: google randomness0110.blogspot.nl or google Root_with_Restore_by_Bin4ry_v18
remove apps: install Root App Delete or Root Uninstaller and fire at will with caution :fingers-crossed:
Good luck
Android OS 4.1 Update Package Download
Thl is wonderful!!! now support Android OS 4.1!!!!!
ThL W5 Line Brush Update Package20130129
Dimension:224MB
Applicable Models:W5
But link is broken i want test this version. i think this will be very useful update...waiting for new link working... :fingers-crossed:
(~EN)
Hey,
I have an Atrix 4G from AT&T (and a Brazilian one as well, in witch I haven't tried the procedure yet) and I installed the CM 10 in it. But I am having a lot of problems with the camera (slow movie and camera stops all the time), with the fingertip, and sometimes the mobile gets really hot. So, I am a bit tired about test different ROMs and I would like to put the original one (motoblur) back. I got this one that is supposed to be the official one by AT&T (is it correct?)
<1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012>
but all the time that I try to install, the installation abort by itself and I have no idea why. I can install all the CMs but I can't install the olympus.
Does someone have the original ROM or knows why I am having this problem? I've rooted my MB860 and I am installing from the SDCard. Before installing, I am doing the full wipe (include cache and anything else).
Thank you
(PT-BR)
Olá,
Eu tenho um atrix 4g da AT&T (e um brasileiro que eu ainda não tentei o procedimento) e eu instalei o CM 10 nele. Estou tendo vários problemas, principalmente com a câmera, leitor de impressão digital, aquecimento, etc. Cansei dessas coisas e quero o Motoblur novamente, ainda que seja mais lento. Eu baixei uma ROM que, aparentemente, é a oficial da AT&T (cujo nome está descrito acima). O meu problema é que eu tento instalar essa ROM e a instalação para por si só.
Alguém sabe o porquê deste problema e se aquela ROM é mesmo a oficial?
Eu estou instalando pelo sdcard e antes eu faço full wipe e limpo tudo, inclusive a cache.
Obrigado
thats a sbf file. if you're trying to flash it via cwm, you don't belong using it. go find a fruitcake rom, much safer for someone who thinks sbfs are meant for cwm flashing.
not trying to sound rude, but giving advice to keep you from destroying your device.
Sent from my MB886 using xda app-developers app
marcelomirbas said:
(~EN)
Hey,
I have an Atrix 4G from AT&T (and a Brazilian one as well, in witch I haven't tried the procedure yet) and I installed the CM 10 in it. But I am having a lot of problems with the camera (slow movie and camera stops all the time), with the fingertip, and sometimes the mobile gets really hot. So, I am a bit tired about test different ROMs and I would like to put the original one (motoblur) back. I got this one that is supposed to be the official one by AT&T (is it correct?)
<1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012>
but all the time that I try to install, the installation abort by itself and I have no idea why. I can install all the CMs but I can't install the olympus.
Does someone have the original ROM or knows why I am having this problem? I've rooted my MB860 and I am installing from the SDCard. Before installing, I am doing the full wipe (include cache and anything else).
Thank you
(PT-BR)
Olá,
Eu tenho um atrix 4g da AT&T (e um brasileiro que eu ainda não tentei o procedimento) e eu instalei o CM 10 nele. Estou tendo vários problemas, principalmente com a câmera, leitor de impressão digital, aquecimento, etc. Cansei dessas coisas e quero o Motoblur novamente, ainda que seja mais lento. Eu baixei uma ROM que, aparentemente, é a oficial da AT&T (cujo nome está descrito acima). O meu problema é que eu tento instalar essa ROM e a instalação para por si só.
Alguém sabe o porquê deste problema e se aquela ROM é mesmo a oficial?
Eu estou instalando pelo sdcard e antes eu faço full wipe e limpo tudo, inclusive a cache.
Obrigado
Click to expand...
Click to collapse
Evite ao máximo flashear sbf no atrix da AT&T, pois pode dar hard-brick, use os fruitcakes (zips com a rom oficial). Já no brasileiro, use o rsd lite e flasheie o 2.3.6 oficial do brasil.
Try to not flash sbf on AT&T Atrix, because it can hard brick, use the fruitcakes instead (zips with official rom). On the brazilian atrix, use the rsd lite and flash the brazil official 2.3.6.
LimaBEERRE said:
Evite ao máximo flashear sbf no atrix da AT&T, pois pode dar hard-brick, use os fruitcakes (zips com a rom oficial). Já no brasileiro, use o rsd lite e flasheie o 2.3.6 oficial do brasil.
Try to not flash sbf on AT&T Atrix, because it can hard brick, use the fruitcakes instead (zips with official rom). On the brazilian atrix, use the rsd lite and flash the brazil official 2.3.6.
Click to expand...
Click to collapse
I've also tried to use the .zip file. But I've gotten the same problem. But, does is change, even if inside the .zip package there is a .sbf? Does someone have a link for the download of that (fruitcakes and brazilians official roms as well)? I tried on the motorola's webpage but I couldn't find anything.
Eu tenho tentado com os .zip também mas tenho sempre o mesmo problema citado. Mas existe alguma diferença, mesmo havendo um arquivo .sbf dentro do pacote zip? Alguém teria o link para baixar as rooms oficiais, tanto a da AT&T (fruitcakes, como informado) quanto as brasileiras?
Thanks
Obrigado
das8nt.com/downloads
Sent from my MB886 using xda app-developers app
Hi!
Today I unlocked bootloader and tried to root the phone. After flashing Magisk patched boot.img phone did boot but touch screen did not work. Me being silly, tried different things and right now phone doesn't boot. I can still get to bootloader and recovery. Is there any way for me to flash full stock rom to fix that?
I know I was stupid.
Hoping that somebody can help me,
mectax
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
pamplinas said:
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
Click to expand...
Click to collapse
Thank you very much, I'll give this a try tomorrow!
EDIT: PROBLEM SOLVED - Used Lenovo's Rescue and Smart Assistant
pamplinas said:
Try https://support.motorola.com/uk/en/...oto-g-family/moto-g8-power/documents/MS140571 see if it helps
Click to expand...
Click to collapse
Will this rescue a hard bricked device??
If the touchscreen didn't work then that usually means you flashed a different version of the kernel / signed differently. If you can get the stock boot.img and flash it...it should recover itself also.
Adge40 said:
Will this rescue a hard bricked device??
Click to expand...
Click to collapse
Any info on this please?
darko454 said:
Any info on this please?
Click to expand...
Click to collapse
Hard bricked as in no bootloader or can you get to the bootloader. If you can't get to the bootloader does a computer recognize anything in the device manager when its plugged in?
I was having issue with google services on my new phone that i got from Amazon. So I did factory reset few times but still having issue so i thought flashig might help and i used Mototola tool Rescue and smart assistant and found correct version of moto g8 power lite XT2055-2. But after flashing my phone just hard brick. No power on, not going to recover model, don't charge when plgged in and don't even recognised by laptop when i plug in. The only thing i can see when plug into laptop or power source is red tiny light whic you normally get while charging. other wise phone is dead. I tried SP flash tool but got error as soon as click download. And error is ;
ERROR: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003)
Can somebody please help. I did eevn used for a single day. I bought it open box like new.
coolarun1980 said:
Eu estava tendo problemas com os serviços do Google no meu novo telefone que recebi da Amazon. Então, eu fiz a redefinição de fábrica algumas vezes, mas ainda com problemas, então pensei que o flashig poderia ajudar e usei a ferramenta Mototola Rescue e o assistente inteligente e encontrei a versão correta do moto g8 power lite XT2055-2. Mas depois de piscar meu telefone apenas tijolo duro. Não liga, não vai recuperar o modelo, não carrega quando conectado e nem é reconhecido pelo laptop quando eu conecto. A única coisa que posso ver quando conecto o laptop ou a fonte de alimentação é uma pequena luz vermelha que você normalmente obter durante o carregamento. outro telefone sábio está morto. Eu tentei a ferramenta flash SP, mas recebi um erro assim que cliquei em download. E o erro é;
ERRO: STATUS_BROM_CMD_SEND_DA_FAIL_(OxC0060003)
Alguém pode por favor ajudar. Eu eevn usado por um único dia. Comprei caixa aberta como nova.
Click to expand...
Click to collapse
OLÁ AMIGO ESTOU COM O MESMO PROBLEMA MEU APARELHO É O MOTO G8 POWER NAO CONSIGO ENTRAR NO BOOTLOADER NAO CARREGA QUANDO CONECTADO NO CARREGADOR NEM O PC RECONHECE ELE NAO LIGA, VOCE CONSEGUIU RESOLVER OU ALGUEM PODE ME AJUDAR?