First, you will need to choose a picture for your Lockring.
-IT MUST BE 271 X 270 PIXELS!
-IT MUST BE A .png FILE!
-It also needs to be rotated 180 degrees, and mirrored (horizontally flipped).
Save the image as Custom.png
You need to download the file I have attached:
LockRingMaker.zip
Extract the file wherever, and place the 'custom.png' in the extracted folder.
Double click the "Rename & Run.bat" file and wait.
Done!
If you want to create more than one LockRing, do not delete the .zip file as it cleans up after itself!
To install, flash through Clockwork. MAKE SURE TO NANDROID!!! IF I BRICK YOUR PHONE DON'T BLAME ME!
Tell me if it works please! (and say THANKS!)
Another method that may/may not work:
Download
Run the "LockRingCreator.bat"
The original thread for this one is here:
http://forum.xda-developers.com/showthread.php?t=1253613
This was originally made for the Evo 4G, so it might not work...
Anyone try this yet?
Sorry for you, guy, but the first feedback you have is negative
I made a custom png following your specs, and saved it to replace the provided custom.png
I ran the batch.
zip file copied to sd.
started in recovery.
install zip file
reboot
...and... still old locking
Hhhmmm worked for me. I only have to get the transparency worked out so that I have a ring and not a ring on a white square box.
I am using warm ROM and cm recovery if that maters.
kitarolivier said:
Sorry for you, guy, but the first feedback you have is negative
I made a custom png following your specs, and saved it to replace the provided custom.png
I ran the batch.
zip file copied to sd.
started in recovery.
install zip file
reboot
...and... still old locking
Click to expand...
Click to collapse
What ROM are you using?
Sorry about the late reply, was quite busy with school
My ROM is kingcobra 1.4 I stay on this one because it's working fine for me.. Everything I need is working.
If you are in examinations,I hope it will be fine
kitarolivier said:
My ROM is kingcobra 1.4 I stay on this one because it's working fine for me.. Everything I need is working.
If you are in examinations,I hope it will be fine
Click to expand...
Click to collapse
Ahh, I am actually in exams so... I think the problem might be that your Rom is deodexed which doesn't work with this due to different files.
Im confused , i extracted the zip and a whole bunch of folders appeared , so i just put them all in a new folder , but the contents already had a Custom.png , a logo of Ohio state or something , so i deleted that and then clicked the rename and run.bat . Now what do i flash? The zip that says customlockring?.........nevermind , got it to work perfectly , this is great. Thanks.
carnivalrejectq said:
Im confused , i extracted the zip and a whole bunch of folders appeared , so i just put them all in a new folder , but the contents already had a Custom.png , a logo of Ohio state or something , so i deleted that and then clicked the rename and run.bat . Now what do i flash? The zip that says customlockring?.........nevermind , got it to work perfectly , this is great. Thanks.
Click to expand...
Click to collapse
You were meant to replace the custom picture with one of yours
Glad you sorted it out, hit the thanks!
ParrSt said:
Hhhmmm worked for me. I only have to get the transparency worked out so that I have a ring and not a ring on a white square box.
I am using warm ROM and cm recovery if that maters.
Click to expand...
Click to collapse
It's what your using to save your image. Use Adobe PhotoShop or something comparable that you can use transparency & save. But I would recommend Adobe PhotoShop.
Sent to the Third Dimension from the 3rd Dimensional 3VO using BlueTapaTalk
Does not work for MeanRom
number1pb said:
Does not work for MeanRom
Click to expand...
Click to collapse
I couldnt get it to work with Mean also. Ive tried everything to change the lock ring for that rom but every time It boots up I have a blank lock screen.
Related
So this is the RockBand.apk, sdfiles and /data/data files , i have tested it on my vibrant and it worked fine , this is the full version!
Steps:
1.extract the Rockband folder to sdcard
2. install Rockband.apk
3.extract the ca.jamdat.flight.rockband folder to /data/data
4.Enjoy
NOTE
You have to unzip the Rackband.zip on your pc , on the phone you wil not get all the files extracted.
MOD EDIT: Warez are not permitted on the forums
*edit*
I have attached a pic from the game running on the vibrant
is the game good?
Sent from my SGH-T959 using XDA App
xalucardx said:
So this is the RockBand.apk, sdfiles and /data/data files , i have tested it on my vibrant and it worked fine , this is the full version!
Steps:
1.extract the ca.jamdat.flight.rockband folder to /data/data and the Rockband folder to sdcard
2. install Rockband.apk
3. Enjoy!
NOTE
You have to unzip the Rackband.zip on your pc , on the phone you wil not get all the files extracted.
Thanks a lot!
Click to expand...
Click to collapse
Works fine on my evo but its only the demo i thought you said it was the full version? but when i extracted the rockband folder it said there were two corrupt files could that be the reason why?
Thanks to the OP. But just to confirm this is the Full Version correct, not the Demo?
it says it's the demo version and i only have three songs in my list
did u put the ca.jamdat.flight.rockband folder to /data/data ?
i tested on my vibrant and i get full version
gonna check the zip file
*edit* for some reason rockband.zip shows 2 files as corrupted , gonna check which ones are missing and gonna upload soon
I repacked everything and going to upload soon
xalucardx said:
did u put the ca.jamdat.flight.rockband folder to /data/data ?
i tested on my vibrant and i get full version
gonna check the zip file
*edit* for some reason rockband.zip shows 2 files as corrupted , gonna check which ones are missing and gonna upload soon
I repacked everything and going to upload soon
Click to expand...
Click to collapse
Alright, I shall Wait.
is the file already fixed?
iynfynity said:
is the file already fixed?
Click to expand...
Click to collapse
yes i extracted it 3 times and no errors , also copied the files again to test it and shows as full version , since my upload is a crap it will take like 1 hour
also fixed the instructions , it should show as full now
xalucardx said:
yes i extracted it 3 times and no errors , also copied the files again to test it and shows as full version , since my upload is a crap it will take like 1 hour
Click to expand...
Click to collapse
oh ok, so the files are not yet uploaded?
No , 27 min left , will change the like as soon as it finish
Sent from my HTC Glacier using XDA App
I get no space uninstall some apps error. Weird, I have 1.53GB left.
Sane1 said:
I get no space uninstall some apps error. Weird, I have 1.53GB left.
Click to expand...
Click to collapse
running lagfix?
OP Updated
xalucardx said:
running lagfix?
Click to expand...
Click to collapse
Voodoo. I don't think it has any app limits like OCLF does. I can install other apps.
just tried, still showing Demo version.
Edit: The keys don't even come all the way down.
Ok heres a problem. The a2_drums_trks.dat is broken so none of the notes show up. a2_gtr_solo.dat was compressed wrong so solo guitar notes dont show. If you can upload those 2 .dat files I will test them. Do a simple compression.
Sent from my SGH-T959 using XDA App
everything works good for me, except when using star power. the notes show for a 1/1000th of a second at the very tippy top. so i kinda have to guess when its time to play the notes. Fun though, thanks OP =)
While this is cool this is still considered wares. Thanks tho hope it gets sorted out
Does anyone have a working bootanimation.zip without the AT&T logo? I tried editing the original one but I ended up with a blank boot animation screen.
you should be able to search the forum for whatever boot animation you want. Granted they won't be the proper resolution if you pick one with black edges you will be fine. I was using one on a previous flash just fine.
I'll try to find the thread where I found mine
Edit: found it at this thread. http://forum.xda-developers.com/showthread.php?t=985251
sweet, so exisiting bootanimations work, I can use my old one again haha.
kmiller8 said:
you should be able to search the forum for whatever boot animation you want. Granted they won't be the proper resolution if you pick one with black edges you will be fine. I was using one on a previous flash just fine.
I'll try to find the thread where I found mine
Edit: found it at this thread. http://forum.xda-developers.com/showthread.php?t=985251
Click to expand...
Click to collapse
I tried those animations and they worked fine, but I still wish I could keep the original animation.
Boot Animations, while can be tricky and a headache, are customizable if you can adjust the image sizes, etc.
For example, the Motorola Atrix can use up to 540x960 for the resolution. You can also add custom sounds at load by saving an OGG audio file to /system/media (same location as the bootanimation.zip) and adding it accordingly to the desc.txt file. Below is an example.
Code:
540 960 1
p 1 10 part0
s autodestruct.ogg
p 0 0 part1
The first line is the resolution and the frames per second.
Code:
"540 960" Resolution "1" Frames Per Second (each individual image)
The second line defines a Part. For example, the first animation you want to play. So far for me, this is the animation AFTER the Dual Core logo that plays when I've made mine.
Code:
"p" Depicts this is a Part "1" Repeat this many times (0 is infinite) "10" is the delay in frames before the next Part "part0" is the directory within the zip to load this part from
So far easy right? The next line, is for the audio file. If the OGG has a loop point, the audio will loop until the Part is over that it plays within.
Code:
"s" Depicts a sound "autodestruct.ogg" The filename to load from /system/media
A few more examples of loading parts............
To load a Part that is a single image, that loops till boot is done, use this
Code:
p 0 0 "directory_name_here"
I'll try to post some example bootanimation.zip files with explanations if I get time. I've only made a couple so far for my company out of boredom.
kmiller8 said:
I was using one on a previous flash just fine.
Click to expand...
Click to collapse
So this doesn't break anything? Will I be able to update my phone when an update is out, without having to restore the original bootanimation.zip?
txtsd said:
So this doesn't break anything? Will I be able to update my phone when an update is out, without having to restore the original bootanimation.zip?
Click to expand...
Click to collapse
I recommend using your file explorer to rename the original bootanimation.zip on your phone to something like bootanimation_original.zip then put in your custom if you have any worries.
That way, if you go to update just rename custom to bootanimation_custom.zip and restore the original.
Personally, I do not know if the boot animation file will affect updates, but that is a failsafe for you just in case.
ownedbycurry said:
I tried those animations and they worked fine, but I still wish I could keep the original animation.
Click to expand...
Click to collapse
Ohh, so what you want is the default bootanimation without the ATT part!
I've personally never worked with bootanimations before, but using MrSER's guide above, i'll try to do that for you.
EDIT: yea... I only get the blackscreen too, really weird...
EDIT 2: figured it out. if you're using WinRAR, when you go to make a .zip, choose "store" instead of "normal" compression, and it should work just fine. I have attached the Default bootanimation.zip without the ATT part
kmiller8 said:
Ohh, so what you want is the default bootanimation without the ATT part!
I've personally never worked with bootanimations before, but using MrSER's guide above, i'll try to do that for you.
EDIT: yea... I only get the blackscreen too, really weird...
EDIT 2: figured it out. if you're using WinRAR, when you go to make a .zip, choose "store" instead of "normal" compression, and it should work just fine. I have attached the Default bootanimation.zip without the ATT part
Click to expand...
Click to collapse
Thank you so much!!
kmiller8 said:
EDIT 2: figured it out. if you're using WinRAR, when you go to make a .zip, choose "store" instead of "normal" compression, and it should work just fine. I have attached the Default bootanimation.zip without the ATT part
Click to expand...
Click to collapse
My bad mate, forgot to mention that. I make mine with Winzip 15 Pro and set it to No Compression (from my experience, no compression is a requirement).
I may end up doing a tutorial on all this on my blog. If I do, I'll post a copy here and link as well (I like screenshots on my blog, lol).
MrSER said:
My bad mate, forgot to mention that. I make mine with Winzip 15 Pro and set it to No Compression (from my experience, no compression is a requirement).
I may end up doing a tutorial on all this on my blog. If I do, I'll post a copy here and link as well (I like screenshots on my blog, lol).
Click to expand...
Click to collapse
Yea i ended up googling and it showed that if the .zip is compressed it will just show a blank screen.
Definitely do a tut, I really wanna start making some Atrix boot animations
kmiller8 said:
Ohh, so what you want is the default bootanimation without the ATT part!
I've personally never worked with bootanimations before, but using MrSER's guide above, i'll try to do that for you.
EDIT: yea... I only get the blackscreen too, really weird...
EDIT 2: figured it out. if you're using WinRAR, when you go to make a .zip, choose "store" instead of "normal" compression, and it should work just fine. I have attached the Default bootanimation.zip without the ATT part
Click to expand...
Click to collapse
thanks for the bootanimation.zip, i did chmod 644 it before cp to /system/media to match the perms on the original bootanimation.zip, but i did a reboot and it worked fine. it's nice not having the att logo during boot, and having att removed from the notification bar with the ginerblur mod too. feels good man!
What folder do you put the animation in?
PixoNova said:
What folder do you put the animation in?
Click to expand...
Click to collapse
In the system/media folder.
I know this is a really newb question but I am a newb when it comes to android... I've owned my Atrix for about a week. Anyway, how do I replace this file and where do I find it?
mpalatsi said:
I know this is a really newb question but I am a newb when it comes to android... I've owned my Atrix for about a week. Anyway, how do I replace this file and where do I find it?
Click to expand...
Click to collapse
Just find a boot animation that you like, download the zip file, rename it to bootanimation.zip and then go into your system/media folder and change the name of the current bootanimation to anything you want like bootanimationold.zip. Then put the new zip file in the system/media folder and there you go. You do not need to move the old boot animation file as long as you change the name.
of course, the method I'm describing is relevant if you have rooted your phone and you have something like Root Explorer, otherwise you will need to use adb, but still you need root.
live4nyy said:
Just find a boot animation that you like, download the zip file, rename it to bootanimation.zip and then go into your system/media folder and change the name of the current bootanimation to anything you want like bootanimationold.zip. Then put the new zip file in the system/media folder and there you go. You do not need to move the old boot animation file as long as you change the name.
of course, the method I'm describing is relevant if you have rooted your phone and you have something like Root Explorer, otherwise you will need to use adb, but still you need root.
Click to expand...
Click to collapse
Thank you, worked like a champ... Is there an explorer I can use on my PC while my phone is connected? I attempted to use droid explorer but I can't access any of the folders.
mpalatsi said:
Thank you, worked like a champ... Is there an explorer I can use on my PC while my phone is connected? I attempted to use droid explorer but I can't access any of the folders.
Click to expand...
Click to collapse
Sorry, wouldn't know about that, I always use Explorer or adb.
kmiller8 said:
Ohh, so what you want is the default bootanimation without the ATT part!
I've personally never worked with bootanimations before, but using MrSER's guide above, i'll try to do that for you.
EDIT: yea... I only get the blackscreen too, really weird...
EDIT 2: figured it out. if you're using WinRAR, when you go to make a .zip, choose "store" instead of "normal" compression, and it should work just fine. I have attached the Default bootanimation.zip without the ATT part
Click to expand...
Click to collapse
Thank you so much man I really wanted to remove this AT&T animation
im having a similiar problem on my rooted atrix. I tried to change my bootanim and just gives me a black screen, so i tried to change it back to the orignal and nothing. I checked if the zip was compressed and it isnt. i dont know what i did wrong, i didnt touch anything but the zip
I found this over in the Sensation forums, and it works well/ looks good on our phone. I haven't tried the green one. I used Root Explorer to put .zip in /system/ customize/ resource, renamed to Sprint_bootanimation.zip, and changed the permissions to match the original Sprint_bootanimation.zip (renamed to Sprint_bootanimation.zip.bak)
http://forum.xda-developers.com/showthread.php?t=1198316
thanks
Thanks for the heads up OP! works great. picked the blue one.
NICE find...Thanks...
wow very nice find bro thanks!
So csn anybody help me? Im trying the blue one, I pushed it to system/customize/resource....renamed it Sprint_bootanimation.zip changed permissions to match the sprint_downanimation.zip....and I only get a black screen when rebooting phone
SHOTS FIRED!!! From 3 Dimensions!
anti-up said:
So csn anybody help me? Im trying the blue one, I pushed it to system/customize/resource....renamed it Sprint_bootanimation.zip changed permissions to match the sprint_downanimation.zip....and I only get a black screen when rebooting phone
SHOTS FIRED!!! From 3 Dimensions!
Click to expand...
Click to collapse
Maybe try downloading the bootanimation again? Sounds like you're doing everything else right...... I have seen that some roms have the bootanimation in /data/local.
Added the blue one, looks nice, just need to add a sound to it, lol
Thanks given!
There's a zip file on the 3rd page of that thread. Is that okay to flash through recovery?
Dave2582 said:
There's a zip file on the 3rd page of that thread. Is that okay to flash through recovery?
Click to expand...
Click to collapse
I wouldn't just because it was made for another phone. If you decide to try it, make a nandroid backup first!
I'm just having trouble covering the basics. I try renaming the original animation to .bak, but I'm getting denied. I can't swap files through Astro or ES Explorer.
ducky1131 said:
I wouldn't just because it was made for another phone. If you decide to try it, make a nandroid backup first!
Click to expand...
Click to collapse
It's just a boot animation, doesn't matter if it was made for the G1.
codito said:
It's just a boot animation, doesn't matter if it was made for the G1.
Click to expand...
Click to collapse
I got time to loose, Ill try the green android one and report back once done...
Hmmm, Installed without issues, But made no change on my evo. Still has the ViperRom boot anim.
Yeah, I flashed the blue one through recovery with no problem, but no changes were made.
I do like the animation and hope to get it on my phone.
You have to mount the system as R/W to make changes. Also, not all roms have the bootanimation in the same place and/ or named the same thing (i.e. a Sensation bootanimation flashed through recovery isn't going to replace one named Sprint_bootanimation.zip).
Alright,
So after I remount, I can pull the original zip from /system/customize/resource
The new animation is on the sdcard. What's the proper syntax to push?
adb push / sdcard/Sprint_bootanimation.zip /system/customize/resource?
I got it, nevermind...
I just switched out the files from my PC once I pulled the original file.
It works now.
Thanks for sharing!
Sent from my PG86100 using XDA Premium App
These are cool animations , metamorphs packages made by Poontab. Use zipthemer to flash them. Instructions and original post below. Work on our ICS roms using zipthemer. All of them look fantastic.
Original Post
Here is one for PassionV13.
RubikPassionV13
Undo
I must be stupid...because I am having trouble with the "stupid-proof" instructions xD
Just to clarify, step 5...you select what exactly? xD
Xenoism said:
I must be stupid...because I am having trouble with the "stupid-proof" instructions xD
Just to clarify, step 5...you select what exactly? xD
Click to expand...
Click to collapse
You need to update edify script according to rom you have flashed on your phone. Step 5 is just that. Open supreme, go to menu and update edify then point it to your Rom zip on your Intel our external card where ever you have it saved.
Sent from samsung vibrant
This is really great...once I figured it out. Slick stuff. Thanks for sharing.
Sent from my SGH-T959 using XDA App
Which ones do you guys recommend trying out?
edit: alright, i followed the instructions to setting it up, now how do i choose the chaos.zip as the animation? Do i just flash the .zip???
xriderx66 said:
Which ones do you guys recommend trying out?
edit: alright, i followed the instructions to setting it up, now how do i choose the chaos.zip as the animation? Do i just flash the .zip???
Click to expand...
Click to collapse
I can't seem to figure it out. I created a zip, then flashed it but nothing happened.
Sent from my Vibrant on roids.
ok.. so Now I put the chaos.zip into +theme and built it, made a backup, flashed the chaos_update.zip on my recovery, but i dont think theres a change...
xriderx66 said:
ok.. so Now I put the chaos.zip into +theme and built it, made a backup, flashed the chaos_update.zip on my recovery, but i dont think theres a change...
Click to expand...
Click to collapse
Yeah, same here.
Sent from my Vibrant on Roids.
xriderx66 said:
ok.. so Now I put the chaos.zip into +theme and built it, made a backup, flashed the chaos_update.zip on my recovery, but i dont think theres a change...
Click to expand...
Click to collapse
Same for me... No change
Sent from my SGH-T959 using XDA App
Getting late and I have to work in the morning but I will put something together about how to use zipthemer. I have used it on several phones and once you get it working, you can do a bunch of things with it. Create themes, custom boot animations, revert.zips. You can also take pieces from different themes and package theme all together into one update.zip with an undo.zip just in case. I'll put it together in the morning.
I just figured it out...
Go to Zip Themer
Click on +Theme
Click on the green arrow and navigate to the zip file you want to use
Click on build it! then select if you want it to create a revert flash able zip
After it's done building the flashable file go into recovery mode and flash the file zipthemer created (it's not in a folder).
Fix permissions
Reboot
dcaples002 said:
I just figured it out...
Go to Zip Themer
Click on +Theme
Click on the green arrow and navigate to the zip file you want to use
Click on build it! then select if you want it to create a revert flash able zip
After it's done building the flashable file go into recovery mode and flash the file zipthemer created (it's not in a folder).
Fix permissions
Reboot
Click to expand...
Click to collapse
Bingo.
It also works with Metamorphs too (if anyone needs some, I have a ton-just PM me). Say you want to revamp your whole status bar.
All you do it hit the +Theme and find your metaporphs (in zip form), and 1 by 1 add them in (*tip if doing this make sure the status bar itself it #1, if you are changing transparency or color. Then everything will build on top of it).
Now that you have all the morphs in there, click Build It (it is always prpbably the best idea to make the Undo.zip as well, just in case).
+Output just tells Zipthemer where to put the finished product.
Flash into recovery and install (I always wipe cache too). Don't like the finished product, reboot into recovery and flash the undo.zip and no harm no foul.
dcaples002 said:
I just figured it out...
Go to Zip Themer
Click on +Theme
Click on the green arrow and navigate to the zip file you want to use
Click on build it! then select if you want it to create a revert flash able zip
After it's done building the flashable file go into recovery mode and flash the file zipthemer created (it's not in a folder).
Fix permissions
Reboot
Click to expand...
Click to collapse
I don't know what the hell I'm doing wrong, but no matter what steps I take, when I flash the file created by zipthemer, nothing gets changed. It still has the regular animation that came stock on the rom.
Same here I don't know if its the Chaos animation that is similar to the stock one possibly? I did exactly what he said and im getting same stock animation, once i get home i'll try to download another one.
dcaples002 said:
I just figured it out...
Go to Zip Themer
Click on +Theme
Click on the green arrow and navigate to the zip file you want to use
Click on build it! then select if you want it to create a revert flash able zip
After it's done building the flashable file go into recovery mode and flash the file zipthemer created (it's not in a folder).
Fix permissions
Reboot
Click to expand...
Click to collapse
I did this for 3 different themed and none have worked for me.
Sent from my SGH-T959 using XDA App
xriderx66 said:
Same here I don't know if its the Chaos animation that is similar to the stock one possibly? I did exactly what he said and im getting same stock animation, once i get home i'll try to download another one.
Click to expand...
Click to collapse
I was thinking the same thing with chaos, so I tried Rubik, but it was a no go also.
Sent from my Vibrant on Roids.
I have tried most of them and they work. I don't know why it wouldn't work for you guys? Post your framework-res.apk or what rom are you using, may be i can add them for you.
I will give you framework once i get home, also where is it located?
and I am using ICS Passion, no idea about the other guy.
xriderx66 said:
I will give you framework once i get home, also where is it located?
and I am using ICS Passion, no idea about the other guy.
Click to expand...
Click to collapse
Okay here is the one with Rubik animations which i think are the best out of that lot, see if it works for you.
RubikPassionV13
Undo
Is it flashable or replacing framework etc?
I have a theme that I would like to share with HTC amaze community but every zip format & signed it say installation aborted. On my own phone any help would be appreciated. Theme includes systemui, frameworkres, & fusion. I tried the zipsigned apk from the market but no luck. How can I make an themed signed zip ?
Inbox me the folders that you want the zip to install to and I'll send you a zip file with the folders and scrips and instructions to add your files to it.
When it comes to a computer i'm more of a noob. All of my own themes i've done thru ninjamorph. No offence i'd need more info then that sorry man.
justin lamantia said:
When it comes to a computer i'm more of a noob. All of my own themes i've done thru ninjamorph. No offence i'd need more info then that sorry man.
Click to expand...
Click to collapse
I'll give you a zip that's gonna install everything you have placed in the systems folder, that will includes things that go into the app/data/framework folders, etc, okay? To not lose the signature, you'll open the file with winrar and drop n' drop your sub-folders into their respective places, you can keep the script/empty zip for future use.
Update.zip: http://d-h.st/Pwo
It empty, put your files into the system/ folder.
Dark Nightmare said:
I'll give you a zip that's gonna install everything you have placed in the systems folder, that will includes things that go into the app/data/framework folders, etc, okay? To not lose the signature, you'll open the file with winrar and drop n' drop your sub-folders into their respective places, you can keep the script/empty zip for future use.
Update.zip: http://d-h.st/Pwo
It empty, put your files into the system/ folder.
Click to expand...
Click to collapse
Thank u just received it . I work 12 long hrs days and come home to three kids and a tired wife as soon as I can I will try to do it . And again thank u
justin lamantia said:
Thank u just received it . I work 12 long hrs days and come home to three kids and a tired wife as soon as I can I will try to do it . And again thank u
Click to expand...
Click to collapse
Just let me know if you need anything else.:highfive:
I don't kno if I'm doing something wrong. I tried to flash the theme.zip on my phone it just keeps saying installation aborted & says do to status 6 which ever that's means any ideas why this wouldn't work I'm s-off ,super.cid , 4ext recovery & sim-unlock could it be any of the scripts inside.
justin lamantia said:
I don't kno if I'm doing something wrong. I tried to flash the theme.zip on my phone it just keeps saying installation aborted & says do to status 6 which ever that's means any ideas why this wouldn't work I'm s-off ,super.cid , 4ext recovery & sim-unlock could it be any of the scripts inside.
Click to expand...
Click to collapse
You see my hq camera mod zip file for telus? Use that, it's in the themes and apps section.
Dark Nightmare said:
You see my hq camera mod zip file for telus? Use that, it's in the themes and apps section.
Click to expand...
Click to collapse
Ok I downloaded it. U swapped the apks & flashed it to my phone & it worked there's just one thing I have to rechange then it'll be ready but now the next thing is to upload the theme should I use drop box and register or something else?
I could upload it to devhost for you under my account so it won't be deleted and stuff. Dropbox is good too.
Dark Nightmare said:
I could upload it to devhost for you under my account so it won't be deleted and stuff. Dropbox is good too.
Click to expand...
Click to collapse
Thank u I've already registered to drop box. I'm about to set it up in themes and apps. I hope everyone enjoys it. I couldn't do it without you man thank u again. Let's find out.
justin lamantia said:
Thank u I've already registered to drop box. I'm about to set it up in themes and apps. I hope everyone enjoys it. I couldn't do it without you man thank u again. Let's find out.
Click to expand...
Click to collapse
Welcome dude, no worries, we're doing a little tutorial for you themers so you could write your own scripts and make your own zips.