Hello all,
I am just wondering if anyone knows of good cases for either the 2200/2400 extended batteries.. preferably one that includes pockets for credit card/cash too.. carrying a wallet around is kinda troublesome! thanks
Case?
I squeezed the 2s with a 2200amp battery into a book open type PDair leather case.
It's not completely fitted but better than others.
Cheers,
Sena and EB cases will fit
sena fits well just that it doesnt sit in the cradle too wel..
i actually did manage the squeeze teh 2400 into a brando hard case... can barely move the keyboard though... and the touch screen functionality is almost zero because of the tight fit.. haha not very practical at all.
the eb slipper case http://www.ebcases.com/Detail.bok?no=3301 looks quite good because it actually covers the bottom of the casing.
I used my XDA 1 with the issue O2 case and the thing I notice between that case and the likes of the nice brando rigid casing is that there are still quite a few bits of the unit that are exposed so if you drop it, bits of your PDA will still get damaged if it happens to fall wrong.
I know, it happened to me on more than one occasion.
from what I can see on the meagre picture on the EB case site, the bottom and sides are covered and the belt clip looks quite nice as well. no accidental clip releases there I think.
could someone tell me if the EB case has the camera button exposed for use, and is there a hole for the camera on this case? it's a bit ambiguous.
I carry a Siemens SX66 with an extended battery but I haven't been able to find a HARD CASE or even a SOFT CASE.
I am currently using the Krussel Flip Top case. It holds the phone together by holding it against the keyboard area. Due to the extended battery, the case is stretched out and wears at the tips.
Siemens SX66
Lion Battery
Extended Life Battery V3
I really wanted to get a soft holster style case so that I don't have to have a leather case on it or a hard case with a belt clip. I haven't been able to find one myself and was wondering if anyone out there has found one.
Please let me know! Thanks in Advance.
I use the same flip-top Krussel with my SX66 and a 3550 mAh battery, and it works fine. Most of the wear is at the top (PDA view) from stretching when closed, but even that wear is only noticable close-up. I use black shoe polish to keep it shiny and moist. I keep the SX66 in my pants pocket most of the time.
The flip-top Krussel comes with a holster belt clip (multidapt), but I don't use it. It is too hard to remove the clip. You must leave the clip and case on if you want to use it holster-style, and the SX66 may be damaged easily by bumping it. It spins around and gets in the way of compfortably holding the PDA in your palm.
You can attach the Krussel to your belt by undoing the inside buttons and slipping your belt under them. But then you must remove the phone from the case to use it.
I looked around for several cases, and this is the best I found which would work with the extended battery. I wanted a case which stayed attached to the phone, rather than a case which could get lost if you took the phone out of it. I also wanted it to fit in my pocket.
You might look at digital camera / mp3 player / walkman cases. Some have belt strap holes. They are generally the right size. But without being able to test them firsthand, it's hard to know which one has the right fit.
If it's just quickly answering the phone that you need, then a wireless BT headset might be better. Then you can certainly store the SX66 in a digital camera case, and attach it anywhere that's convenient and within range. Voice command software can be used to dial outgoing calls.
Any Hard Cases?
I got the monaco leather case for the 8125 from Extreme PDA:
http://www.extremepda.com/page/XPDA/PROD/cingular_8125_accessories/CING8125FLIPCASE
Even though a lot of people said they liked it and it seemed to be the most ideal for constant use, the bottom line is after a week I can't stand having it on my 8125. Here's what I realized:
- Even though it allows the keyboard to slide out, actually holding the device with the case flip behind it makes it tough to type comfortably.
- Folding back the flip every time I get a phone call and securing it in place is not practical.
- The cover inadvertantly causes the phone to either ignore or answer calls by applying pressure on the dial/hangup buttons. While this isn't an issue if the device is in standy, on an incoming call it is. Locking the device is useless because on an incoming call, the phone buttons are unlocked even if the device itself is locked.
After a week of this I finally gave up and took the 8125 out of the leather case. I am worried about it getting dropped/scratched but I just can't find a solution that's practical enough. How are the rest of you dealing with these issues?
yeah most people forget that it's a phone too and not just a pda. so having it in a case like that just makes it more work to answer calls and use the device.
I'm using the Mobile Glove Executice Black Tie Series holder. its a better design than the free case that comes with the 8125. The flap has a magnet in it so it closes really good. I bought it at a mall stand for $30 http://www.mobileglove.com/mobileglove.html it's design for the Treo 650 and similar handheld devices. it fits perfect
I purchased this case and am very happy with it. I don't experience any of the issues described by devGOD. http://cgi.ebay.com/Deluxe-Leather-...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I've bought items from this person for other PDAs and highly recommend him. He also has some other cases for the 8125 available.
Geoffrey
Leather Cases
Hi there. The case listed above was my third case for the 8125. So far I like it the most. This is why I am still looking for a case. Taking it off and putting it on the belt clip is somewhat of a hassle because of the placement of the snap that keeps the thing closed. It gets in the way and it's making it hard to grab the phone in time to answer the ring. Also, using the keyboard is a little akward while it's in the case. Just take it out when at home but when out and about it gets a little tedious.
My next purchase might be the holster but at $30 it's a bit pricy.
Case to consider: Krusell Cabriolet
Here is what fit the bill for me.
http://sfplanet.com/product/87182
Use the phone/screen without any flaps. If you need to use the keyboard, it slides out easily. However, you can shake it upside down and it will stay put.
Krusell offers many choices for additional adaptors to fit your lifestyle. I bought and use their: Carabiner & Swivel Lanyard. I do like the belt clip one it came with - it is the easiest to remove that I've tried, but I don't like extra baggage around the waist.
Here is a link to a website that reviewed 8 cases.
http://www.4winmobile.com/htc-wizard-7-case-shootout-review-conclusion-vt1707.html
I'll look at one of those "deluxe leather cases" on ebay next. Just got a black metal PDAair case off ebay, trying it out. It's ok so far, not sure if it's a keeper. I'm used to having a metal case on my PDA, but I don't usually carry my PDA on my belt, so I'm not sure if I'll stick with it or go leather. I actually started to like the OEM pouch while I used it, but I want constant protection.
Has anyone tried the following case?
http://cgi.ebay.com/T-Mobile-MDA-PD...8QQihZ015QQcategoryZ15036QQrdZ1QQcmdZViewItem
out of my research, i'm beginning to believe that the case that offers the most protection, AND easy usage without much dabbling every time the phone rings seems to be:
http://cgi.ebay.com/Deluxe-Leather-...4QQihZ010QQcategoryZ15036QQrdZ1QQcmdZViewItem
can anybody post saying otherwise? I'm curious to see if anybody has tried it.
I wish those had black stitching, but that case is most likely my next canidate if I try another one.
My black pdair metal case is doing ok, though I had my first drop today, the stupid stud unscrewed from the back of the case. I was kind of worried about that when I got it, the screw was awfully shallow.
The best case is no case
Hi there:
I read the 8 case review and, after doing so, I purchased the Noreve model. It is a beautiful case. The problem is, for me, that I use my 8125 primarily as a phone, and then as a PDA. I also use it a fair amount with a GPS device. For the phone, I find it most useful OUT of the case. Or, sometimes, when it is in my car holder, it is also out of the case. When using GPS, it is out of the case (but secure).
The Noreve is beautifully made, but the 8125 inside of it is like a brick. I find it 'geeky' to use the case with the phone. In fairness, what I like about the Noreve is that the case folds BEHIND the unit when you are talking and therefore does not hang down like a big dog's tongue. You can also use the keyboard in the Noreve, but the device is not that securely inside of it.
The case I use almost everyday is a case I found on eBay. I prefer the horizontal case, although I believe there is a vertical model. It covers the device well enough, has holes for you to push the device out of the case while on your belt when the phone rings, and then allows you to easily slide the phone back in. The belt is secure, and it is fairly light weight. I used to carry my old iPaq in my suit pocket. The 8125 is just too heavy; it works much better on the waist.
It is cheap but durable and it works!
http://cgi.ebay.ca/Cingular-8125-Po...2766581QQihZ014QQcategoryZ15036QQcmdZViewItem
Oh, BTW, that deluxe case is the same case Brando has.
http://shop.brando.com.hk/bwdopod838leathercase.php
i ordered mine tonight. Given the insane amount of research ive done, i'm definitely sure this one is going to be the one with the least amount of risk to try. I'll let you guys know when all is said and done.
Lex, I know what you mean about spending insanely long hours researching cases, as I just went through it. In a fashion uncharacteric of the way I usually work, I ended up buying four cases: Sena Form-fit, Krusell Cabriolet, Krusell Handit, and Piel Frama. The latter is the model with the strap that allows using the keyboard without removal from the case.
I read the 8-case review over and over, and still couldn't decide. The Krusells were cheap, so I bought two on Ebay for a total of $40. I found the Piel Frama on Ebay for $50. I decided to keep the Piel Frama and Handit. Here are some observations:
Sena Form-fit: Very well-made, but has one big flaw: The magnetic closure, which otherwise I like very much, causes the device to fall out if the case is inverted on the clip. In the first week the MDA fell out twice with no damage, so I sold the case. Also, the belt clip was backordered for a month, and I don't know if that has been rectified.
Krusell Cabriolet: Okay, but leaves screen pointing outward and unprotected; same for top. With the swivel clip I was worried it would fall out like with the Sena issue above. I was nervous using it, so I returned it.
Krusell Handit: Nice, inexpensive, well-designed, and no big flaws. I'm keeping it. I would recommend this one for an expensive case that works very well and looks good, but the keyboard is not accessible without removing the device. The swivel belt clip sticks out a bit and flops around on your belt, which is a minor irritant.
Piel Frama: Well-made, very nice looking and stylish, and another keeper. This will be my main case, but it has some flaws, too:
1. The card slots are directly over the screen (no problems so far). A moderate blow might cause the cards to touch the screen, but I'm not sure if that's a real concern.
2. The flip tends to trip the top-front buttons, but I usually put my device in standby before closing the flip, so this isn't usually a problem.
3. Earpiece connector is difficult to negotiate. The hole doesn't line up precisely and the flip is hard to snap when it is inserted. This isn't a major problem.
Virtues include accessibility to the keyboard by just removing a small strap. Best looking case I've seen.
I've decided there is no perfect case, and the only way to determine which is best for you is spend two weeks researching like I did. The 8-case review previously cited is a good start, and if you want a Krusell or Piel Frama keep an eye out on Ebay. The Piel Framas are hard to find, and from the manufacturers site in Europe they are $75, but show up on Ebay from time to time. I was emailed last week with an offer for one like mine from an Ebay seller for only $46 shipped, so if anyone wants a Piel Frama with the strap, let me know. It may still be available.[/b]
Hi I currently have the Krusell Cabriolet for my 8125, which makes using it like a phone very simple. However, pushing it out to use the keyboard without opening a bunch of progams because I pushed buttons in the process makes this a little suboptimal. I don't like the book cases or flip cases because I want my screen uncovered for my own convenience (I have screen protector film and I'm satisfied with that level of protection).
After doing some research, I like the simple styling of the crystal clear case for the 8125 (see links below). Because it snaps on individually on both sides, there is no obstruction to opening the keyboard, and there is no flap over the screen. It is not as elegant as a leather case and not as bulky or heavy as an aluminum case.
My only issue is that it doesn't appear that it is sold with a belt clip. From the photos, it appears that there is an opening to attach a belt clip. I checked the Boxwave site and though they sell clear cases with swivel belt clips on other models, they don't do with some, including this one.
So finally...my question is, does anyone know whether I would be able to purchase a belt clip separately or (1) does this particular case not support a belt clip, (2) it would not be advisable to use with a belt clip even if it was possible, due to design issues (e.g., snap on case not that durable or snug a fit and phone might pop off, etc.)?
http://cgi.ebay.com/Hard-clear-crys...ryZ15036QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://www.boxwave.com/products/activecase/active-case-htc-wizard-cingular-8125_1160.htm
If you are still looking, Check this:
http://www.daydeal.com/home.php?cat=2262
fresh123breeze said:
If you are still looking, Check this:
http://www.daydeal.com/home.php?cat=2262
Click to expand...
Click to collapse
Do these plastic cases cover the screen? It seems they do not, but it is not obvious from the pictures.
They dont' protect the screen. I have one for my mda, and left it on there for like 5 mins. It makes an already bulky phone bulkier. Plus it just feels cheap, especially when you're sliding the keyboard open and shut. But I got it for $10 shipped, so whaddya gonna do? Check ebay for cheaper prices.
(This was with the MDA case...but maybe the 8125 is made with some true craftsmanship so as to avoid these problems )
Thanks just what I needed
Just wanted to say thanks I have been looking for a case like this.
Take care
Cases don't fit 8125
Regarding http://www.daydeal.com/home.php?cat=2262, those cases fit MDAs but will not fit on an 8125. Although both have basically the same form factor, there are enough differences in the edges of the phones and mail/IE button locations that the case will not fit. I learned from experience.
I've been searching on and off for weeks and I cannot find a correctly sized vertical belt case for the S8. I have actually bought three such cases, non of which (despite the product descriptions) fits the S8 correctly. In fact, all are far too big for the phone. I used to buy Suncases for my phones, but they don't do one for the S8 as far as I can see.
PDair do one but it's open-topped and I prefer a closable flap over the top of the phone. Also the PDair one has a belt clip and I find a belt loop much more secure (ask me how I know this!).
Can anyone recommend a well-fitting S8 vertical belt case to me please?
Cheers.
Otterbox Defender